Installed Vista : Reboots The System Blank Screen
Apr 17, 2009
Vista installed fine and everything works fine until, a piece of software asked to restart. Now I have to hope that is boots. Because when it the boot process reaches the microsoft corporation and finishes, the system gives a blank screen and hangs. If I wait long enough, 15+ minutes, it finally boots with the vista logo on the second screen and logon password on the first screen. This is a new pc, just built, I should not have this problem. The pc has an integrated nvidia 9400 with 9800gt. Can it be a grahics card problem? I used the cd to install the drivers that came with the 9800gt.
View 6 Replies
ADVERTISEMENT
Aug 14, 2008
When I boot up my PC it goes all the way to the loading screen (the progress bar) and then monitor goes blank and system reboots. I choose to start in safe mode (from the selection), it starts all good. Then I restart the PC and it boots well without any problems. However, next time I shut down, I have to go through the whole process again. Sometimes I see "dumping physical memory" with a blue screen, sometimes I don't. I THINK it has something to do with my video drivers, but I updated to the latest catalyst drivers and still same thing.
View 9 Replies
View Related
Jun 21, 2008
I have done a clean install of Vista Ultimate (64), and since then, everytime I start my computer, it fails to boot correctly. It passes the BIOS page, starts the animated bar at the bottom of the page, and a few seconds later, the screen goes blank, and my VDU gives the messgae, "NO SIGNAL" After about a minute, the system reboots to the BIOS page again and continues up to the animated screen, and stops again. After it self boots for a second time, I get the SAFE MODE option screen. If I leave it on START WINDOWS NORMALLY, and leave it to complete the 30s count down, It boots again, and then completes the boot into Vista. If at the count down screen, I press enter, it goes into a boot loop that doesn't stop until I press the reset button on my box.? I have done a re-install twice and problem continues.
View 8 Replies
View Related
May 6, 2008
if this has been asked and previously solved before (didn't find it in this thread though). I installed System Shock 2 on my computer (vista home premium 32bit), and it will load fine. My problem is that once you get out of the menu and go to start a new game or click on intro the screen just goes blank and stays blank (a black screen basically). Does anyone have any idea as to what could be wrong and perhaps how to fix this?
View 4 Replies
View Related
Sep 5, 2008
i have a Windows Vista Basic laptop, i've had it for a year now and no problems but a few days ago it was working all good until i shut it down. properly. and then when i turned it on it only comes in a blank black screen only saying Operating system not found.
View 5 Replies
View Related
Feb 24, 2009
How can Vista still have the blank screensaver if it doesn't have a BLANK.SCR file in the c:windowssystem32 folder?
View 3 Replies
View Related
Nov 2, 2009
I had my accounting software running which I minimized. I went out for a couple of hours and found out that my computer had reboot automatically as the minimized program was no longer in the task bar. I am running Norton Internet Security 2009, and Iolo's system mechanics 9.0. Only Norton is active. The other one I run it as I like. I also scan my
system with Malwarebytes frequently. Malwarebytes always finds two infections which are "Broken Open Command - notebook bad (%1) good (%1). Even after it is cleared, it comes back.I have tried to convey as much information as possible. My operating
system is Vista Home Premium 32bt.
View 9 Replies
View Related
Jan 29, 2009
About a week ago a strange new problem started. I have a Toshiba laptop with Vista Home and dual core processor. Lately on SOME occasions the computer reboots itself when I close the lid. It does not do it every time and will shut down fine every time normally. But on some shut downs, when I close the lid the system reboots. It might do this a couple of times in a row and it might not do it for 3 or 4 shut downs. I use the shut down from the start menu. I have changed all of the setting for power settings and what to do when the lid is shut to either never or do nothing and it does not affect it. This computer is only about 4 months old. I have done a restore point before this started but no help.
View 5 Replies
View Related
Feb 12, 2010
Windows Vista Home Premium on an Acer 4420 laptop was working fine up until Wednesday morning. I installed about a dozen updates and ever since then I've had the computer crash randomly but regularly when I have IE8 open. I get a fairly quick blue screen message and then the system reboots without anyone telling it to. If I simply have the computer running but do not have IE8 running it seems to stay stable. I've uninstalled all the updates but it hasn't made any difference--still crashing!
View 6 Replies
View Related
Nov 22, 2009
I have Vista Home Premium x32 with SP2 installed running on an Intel motherboard Core2 Quad with 3GB memory and a nvida 8800GT video board and a 400 Watt p/s, 500GB drive with plenty of free space. My system fan speeds up to full speed and then re-boots. The only warning I get is the fan noise. This happens 5 or 6 times then it won't happen again for a couple days. It seems to happen exactly 1 hour from the last time it rebooted.... no kidding, within a couple seconds of 60 minutes.
Anyway, I thought I would check the event logs for a clue. I noticed that the Shutdown Event Tracker was not available so I looked for a way to turn it on. Vista, at least my version, does not have the gpedit.msc (Group policy console editor?) and other articles indicated that is what I needed to activate the Tracker.
The only thing I can find in the other logs is a recurring entry: "The DgiVecp service failed to start due to the following error: The system cannot find the device specified." how to enable the Shutdown Event Tracker?
View 7 Replies
View Related
Jan 7, 2010
I am having a strange problem with my Windows Vista Home Premium installation. The login screen loads and I can write the user and password boxes, but when I insert the password for my user and I hit the enter button or click the arrow button it does nothing. Clicking on shutdown options button does nothing. Pressing ctrl+alt+del does nothing. And after about 30 seconds it reboots and all the same happen endlessly. I tried all the recovery options ( boot in safe mode, last working configuration, disable restart at error, etc... ) and all have the same behavior.
I booted with the Windows Vista Recovery Tools from the DVD and I used chkdsk. It says that found errors and corrected them but when I run again the chkdsk the same errors are reported and corrected. Used sfc /scannow with the offline options and it says that found some corrupted files and is unable to correct them, but when I check the logs no relevant errors are found. Tested the memory and the hard drive using ubuntu live cd and the results were that both are ok. With ubuntu live cd I am able to boot and access all the windows files.
This is not the error "installing updates 3 of 3" or the black screen of death after welcome screen. This happened when I was using the pc and suddenly it freezed and I pressed the power button to do a hard shutdown. After that these symptoms started. Until there everything was fine. I didn't download any virus, as I am a computer programmer and I know what I am doing I just can't understand this error. What do you guys think it is? Is it a virus or some of the system files are corrupted or a hardware problem? I would not like the reinstall vista option because I have a lot of data and a lot of programs installed. What other options do I have? By the way the Vista I have is Service Pack 2.
View 4 Replies
View Related
May 10, 2008
my computer showing white screen. I maybe turn it on and a few minutes later it's completely white. Sometimes it showes first stripes, black and white. I've googled it but not found much so I went here to ask. For about 2 months ago I had problem with BSOD but re-installed Vista and it was OK. My computer is Packard Bell SB87 (something like that, not sure) and with Vista Home Premium.
View 7 Replies
View Related
May 6, 2008
I've been trying for 2 days now to upgrade from Vista Business edition to SP1. The same thing keeps happening. I get through parts 1 and 2 ok, but when the system reboots for part 3, it reboots several times giving me the choice to boot normally or in safe mode, then eventually it stops rebooting and just goes blank. I can reboot successfully in safe mode but the installation of part 3 will ultimately fail (the error code points to not being able to install particular components as a result of being in safe mode) and the system has to regress to the original condition. I tried all the suggestions on the MS Vista upgrade trouble shooting site (as well as several other sites)- including checking for specific updates - none of which apply to my machine - at least that what windows update tells me when I try to install them, checked the disk for errors, and checked the memory for problems. I also turned absolutely everything no- original MS off for start up including antivirus and some other stuff that I have and the same thing keeps happening. Each pass, from upgrade install to fail, and regress back to original condition takes about 5 hours.
I'm running Vista on a quad core machine with 4G of onboard memory (even though Vista 32 can only use about 3 gigs) and a smoking video card so I doubt this is a hardware problem. This problem appears to be similar to the original 'endless reboot' problem that prompted the original halting of SP1 distribution back in the early spring - I thought that problem was fixed! I tried to get real time help from the MS site but got a message that there was a problem with the site. - Good Greif! This is probably the most frustrating MS experience of all time. With all due respect to the folks at MS, if it was your intention to have people to switch from Windows PC's to Apples or even Linux based PC's, I doubt you could have come up with a better plan. I've already switched two of my home computers to Ubutu!
View 8 Replies
View Related
Jun 29, 2009
let me start this nightmare story i had just done a fresh restalled and spent hours on getting everything installed on pc all was fine working perfectly untill that is i installed vista service pack 1 from windows updates the update process crashed halfway through so i had the only option to restart my pc then came the blue screen of death and it metioned if you have any new hardware installed make sure all drivers are installed etc etc of course i know it wasnt hardware it was because of me restating my pc half way threw the service pack 1 and the full files not been installed threw the update process crashed was the reason for the blue screen but the blue screen had notes advising me to clear shadow memory in the bois and any other memory so i stupidly assumed this was channel mapping and bank mapping and put them all to zero please see jpeg of what i changed i basically disabled everything that was enabled and put all the mapping channels and bank channels to zero and now when i switch on my laptop i get a blank screen with no post no ...........
View 9 Replies
View Related
Feb 14, 2009
I have a customer's machine on the slab that had a corrupted copy of Vista installed on it and tried every rescue technique I could find (Vista recovery DVD, XP CD, WinPE and a few others) finally using Linux to backup the customer's files.
Installing from an OEM copy of Vista seems to be problematic at best, it stalled at 23% then rebooted, so I repaired the drive in XP and got to 56% before the reboot. So I nuked the drive with a slow format in XP and then it got to 70% before rebooting. It sounds like hard drive related but the customer's video card fan had dropped off so I suspect it may also be a heat related issue. Does anyone else have any ideas for the reboots?
View 9 Replies
View Related
Jul 29, 2009
I have the blue screens problem. I'm not good with computers but a friend of mine told me that vista and webcams hardware are sometimes the problem to the blue screens and I also noticed that it happens when my webcam is open, I have vista 32-bit Operating System. This is what happens: The blue screen appears ( my blue screen is weird because usually theres a lot of text that comes with it but mine is just all blue with nothing on it) after the computer restarts itself.
View 4 Replies
View Related
Mar 26, 2008
It is in an unbootable state right now. I am posting from another computer. After apparently downloading and beginning the upgrade, it just stops, with a message sort of like: !!0xc09000 HelpPane.exe !! on the screen. I am actually not sure of the numbers; only the HelpPane.exe part and the double exlaimation points. I can't believe MS managed to completely blow this AGAIN after all the problems with Vista initially. My 1 year old computer is a worthless brick right now. I can't be the only one with this problem. I am fuming right now. How can MS fix this ?!?!
View 9 Replies
View Related
Jul 7, 2008
I can connect my laptop to my computer and get sound and video with absolutely no problem. Where I run into my issue: When it's connected, the TV turn into the monitor and my laptop goes blank. (I believe I selected this option not knowing what the outcome would be when my windows vista laptop was connected to the TV for the very first time). I absolutely dislike that I have to work all my functions through my TV and would like my laptop monitor to display a screen at the same time. Is that possible to undo what I caused?
View 4 Replies
View Related
Mar 23, 2008
I read somewhere that if you go to the Power Options, advanced options, processor power management, and change the value of the minimum processor state to 100%."
View 4 Replies
View Related
Sep 18, 2009
I had 2.5GB of RAM in HP laptop. OS - vista home premium service pack2.
The system works fine.
I upgraded to 4GB RAM(2*2GB). when upgraded to 4GB in bios able to see as ~3.33GB of RAM. I am able to see microsoft progress bar also, but after that the screen is blank and able to hear windows logon sound but no display. The screen is black.
When installed only the new 2GB of RAM the system work fine. So no problem with the new 2GB also. But with 4GB the screen is blank. I have nvidia GeForce 7400 graphics card. Is there any configuration need to be done in vista before installing 4GB of RAM?
View 9 Replies
View Related
Jan 18, 2010
I accidently turned my Dell laptop off while it was performing windows updates. When I restarted the laptop it goes to the login screen and then goes blank (i cant enter the username/password).
I have tried the following:
1. Starting in safe mode (same issue)
2. Using the boot dvd and trying the different options in there (Repair, Restore to safe point, Memory check).
3. Using the boot dvd I have tried several different restore points, including the original store point.
4. I have looked through every forum and every post I can find and cannot find any suggested resolutions.
View 8 Replies
View Related
Apr 5, 2009
If go to Help And Support or click (or use F1 key) for anym windows' applications, the Help & Support Screen comes up but is blank. If type something in search get following message. HELP TOPIC NOT FOUND: "This Content Under Construction". "We Were Unable To Retrieve The required Topic". Have tried all the reg. fixes have seen for restoring Help & Support and ones relevant to this particular error message without success. No other problems with Vista Ultimate and have no idea why or when occurred.
View 7 Replies
View Related
Mar 20, 2009
I have 4 vista 32 bit machines. 1 will update beautifully. When I go to run the Windows update, the other 3 "time out". They sit there with a blank box on the screen for well over 5 minutes, before in sheer frustration, I trash it. I know at least 1 machine is saying it has 350Mb of downloads to do, but when I tell it to start, it does nothing. All are running SP1.
View 4 Replies
View Related
Jan 30, 2009
I have scheduled a chkdsk to take place the next time I restart my computer and when I restarted it, the problem started! After the Boot Screen finished booting nothing happens, the screen stays blank. I have left it for hours and still nothing happens. How can I solve this problem? I also wanted to mention that I have changed my boot screen using this tutorial. I didn't really have any problem after following that tutorial but I only wanted to mention that...
View 4 Replies
View Related
Dec 4, 2009
I recently updated my Vista, using the normal windows update. This made my WHOLE operating system go completely retarded, but once I used safe mode a couple of times it sorted out. I recently installed Ubuntu, so I can dual-boot my laptop. Now, all of a sudden after the Ubuntu install, my windows vista is broken!! I get to the log in screen, and i log in as normal, and then i get to my desktop - which is just a blank white screen with my curser on it. I can press CTRL-ALT-DEL, and i can log off and shut down, but I can not use task manager, and it gives me an error message saying something like 'it can not run' or something.
View 4 Replies
View Related
Oct 12, 2009
Whenever I start my computer (HP Pavilion dv5 laptop) from being shut off or if I choose "restart" from the start menu when Windows Vista (64 bit) opens up it opens up to a blank screen. - I have a curser I can control with the touchpad or mouse (I can't recall what happens to a right click function...) - the screen looks completely black (uniform in color) I need to exit using control+alt+delete and then log off and log back on. Only then will I get the desktop top to show for me.
View 4 Replies
View Related
Mar 3, 2009
Rebuilding my system, new motherboard, optical drives (Sata) new CPU Intel DUAL 8400. Install Windows Settings OK till naming PC, Then Blank screen. No Signal. Changed GPU. No Signal. Removed HDD and reformatted. Replaced , still no Bios, blank screen
View 4 Replies
View Related
Jan 2, 2008
i installed my 8800 gts with the cd that came with it...rebooted, but all the monitor shows is a black screen (yes the monitor plug thingy is connected to the new gfx card). since the black screen came up, i switched the input back to the integrated gfx card. how do i disable the onboard (integrated) gfx card so that my comp will detect the 8800gts on startup cuz right now it detects nvidia geforce 6150 se (on board gfx card) even if i uninstall it.
View 5 Replies
View Related
May 17, 2008
Switch on PC, Choose any user from list, after login, i get a black screen. After searching i found my way to the registry using F8->Repair
..->Command promt->regedit.exe
In there i found that the everytime i change
[*HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerShell*] to explorer.exe, and restart my pc, it changes to *cmd.exe /k start cmd.exe*. i dont know what to do now. The following didnt work:
- CTRL-ALT-DELETE/CRTL-SHFT-ESC to show task manager
- Safe mode
- System restore and repair
View 5 Replies
View Related
Aug 17, 2008
I have a notebook with Windows Vista Home Premium 64-bit on it. The problem is that my boot is take a lot of time. First I get the BIOS screen with the Dell logo that is taking about 3 seconds (so that is good). But the loading bar is taking a lot of time. It is going from left to right for 13 times (This is not normal I think). After that, my screen is going blank for about 10 seconds and then I get a black screen with mouse cursor for about 10 seconds and then again a blank screen for 10 seconds (So a total of 30 seconds, which also not normal). After that I get the vista logo with the sound and the welcome screen, which is taking a long time (for about 25 seconds).
After that I get a blank screen for 20 seconds and then the desktop appears and from now on everything is running fine. So my question is: WHAT is causing this slow boot! I have already read the tutorial 'How to Speed Up Vista Boot Time' and did everyting they said. My startup programs are Kaspersky Internet Security and MSN Messenger. I have enabled superfetch and prefetch and set the registry value on 3. What else can I do to decrease the boot time?
View 6 Replies
View Related
Mar 23, 2008
i have a basic Toshiba laptop "new" with the basic Windows Vista on it. For some reason every so often, about twice a day, the screen will suddenly go blank. I can still hear music that im playing or whatever, but the screen is blank and the only way to clear it is to manually push the power button to restart the computer. All i use the laptop for is itunes and surfing the web, checking emails. it has never been dropped. its sits on a desk and doesnt move.
View 8 Replies
View Related
