Frustrated Trying To Ad Logo To Signature Email
Jun 28, 2008
I have read all the threads, tried to follow the many different suggestions/directions to get my logo into my email signature. At this point, I am giving up. I am a moderately versed computer person, but can usually follow any well given directive. Now I am stuck with a problem after spending several hours on this issue. Every time I start a new message. I have "source, edit, view" tabs at the bottom of my email. Please help me undo this. I am shocked that the makers of Window Mail/Vista would not have addresed this issue before releasing....horribly missing my windows xp.......
View 4 Replies
ADVERTISEMENT
Mar 23, 2008
I have Vista on my new computer and my husband recently added a signature to his email file at work with a logo. I can no longer see his text in the emails he sends to me. I also cannot type anything in the email created when replying to these messages. I should note that he has Vista at work also on some of their computers including the one he uses and he has none of these issues. Is there a setting I need to change? I've searched the internet along with this site for a solution and haven't seen this particular problem. If need be I can send the email property details to show you. When I got to properties of the email and show the details, it shows the message included in 'part 1' of the message.
View 9 Replies
View Related
Mar 23, 2008
I have tried to save the following info with the required path, but have been unable to save it from Notepad to another file in an .htm file. I have used the following info for notepad. This would be the path to your logo
View 4 Replies
View Related
Oct 16, 2009
I followed VistaRookie's 10 step procedure for making a signature with a logo. It worked. Then I added more information and now it doesn't work. My email shows the code stuff instead of just the info and logo. I don't know what I did wrong. I deleted the first try and made the new HTM file using the same steps.
View 6 Replies
View Related
Sep 1, 2009
How could i attached the company Logo to my signature.
View 4 Replies
View Related
Mar 23, 2008
The only way I've been able to have my signature included in posts is to = use RTF, but even then the signature is automatically included only with = a new post. When I post a reply I need to manually insert it. I'm using = an HTML file for the signature.
The only way I've been able to have my signature = included in=20 posts is to use RTF, but even then the signature is=20 automatically included only with a new post. When I post a reply I need = to=20 manually insert it. I'm using an HTML file for the = signature.
View 9 Replies
View Related
Apr 17, 2008
Need To Fix Boot Logo OS?Vista Home Premium/service pack 1. This is the best install I have ever done (or was)?I did a fresh install and followed a tweak guide at 'NBR Vista Tips and Tweaks Guide - Notebook Forums and Laptop Discussion' which was to very enlightening, to say the least. From there I have been to a few other sites and moved on to fully customizing my desktop/login and??well?this is where I stuffed up?My BOOT screen no longer works properly, even with the original ?winload.exe.mui? file replaced.
I downloaded and used ?Vista Boot Logo Generator? I loved the results on my last install?It worked well. Upon deciding to do a fresh install with Tweaking in mind, I simply coppied over a Boot logo I made previously after allowing permissions and all that as well as changing the NO GUI in msconfig?ect?.BUT
The problem is as follows:??..The original auora background comes up?...and without the Windows is Loading Text???......I mean wtf?I just moved and replaced the original file and I get this on reboot. I have tried making more logos but everytime I restart the same thing. I have disable and re-enabled the boot gui option in msconfig?even putting back the original file does not get it working properly as the loading text is gone from that pic???
View 9 Replies
View Related
Jun 27, 2008
I have been trying to insert a signature which includes a logo into messages for one of my e-mail accounts. No matter where I place the html file (built using Frontpage) holding the signature and graphic, the graphic will not show in the message. Just the horrible red 'x' below the text. Clicking the blank,
View 8 Replies
View Related
May 13, 2008
I would like to put my own logo on the icons on my desktop. I can go in and find lots of icons but would prefer my own, ie: bank logo, ebay logo, etc. Is this possible?
View 6 Replies
View Related
Dec 8, 2008
I have A computer In witch i have Done Something In BIOS... I have Set Hight Performance options Default .. So i Set this Option And then Saved And Exited But when The Computer StartS it Looks Like Having another Bios Another Logo and Dont Start Up Neither windows Nor Go ine thE Bios Options So Is there A way To Restore My Previsous Settings OR Something Like That Or To RESET to factory Defaults.I have tried to remove the Battery and Put it Back again But nothing happened :I dont Know Exactly Witch Is my Motherboard But the Only I Remember It Is that the Bios Manufacturer Was AMI : American Megatrends INC.
View 4 Replies
View Related
Mar 15, 2009
I desperately require assistance. Ok, so it's not 'desperately', perhaps frustratedly (is that a word) is better. Windows Vista 64 When I press the Windows Logo Key nothing happens. Well, something happens, a small box above the task bar notifications comes up that indicates "Key Disabled". I've tried just about everything I can think of: Searched Microsoft. I'm absolutly flabberghasted and down right disgusted with Microsoft. Not only for their idiotic implementation of such stupidity, but the total lack of documentation on the subject. I kindly request your knowledge and technical assistance on this matter.
View 9 Replies
View Related
Jun 19, 2008
I recently purchased my business card in a jpg file so I can use it in an automated signature. I do Tools>Options>Signatures>File>Browse and insert the file with my e-card. When I go to create a new email, all that appears instead of my card is.
View 5 Replies
View Related
May 2, 2009
i want to be able to click on insert signature in my e mail and have my business card appear
View 8 Replies
View Related
Jul 29, 2009
I'm having a problem with my signature. I've created it in Microsoft Works Word Processor and everything appears correct except for the double spacing. It is not double spaced on the Word Processor so why after I transfer it to Windows Mail does it get double spaced??? I can't figure out how to correct this;
View 4 Replies
View Related
Jul 6, 2009
I have a GW M6307 2gigs ram with VHP 32 bit. Over the last several days on start-up the computer will show the GW screen for about 150 sec. then boot normally. I did do a Java update just before this started and have since uninstalled and reinstalled Java with no problem. I ran malware bytes(no issues) SFC ( 2 files repaired from log) and CHK disc. After shutting down for 10min. and a start-up the GW logo was normal(6 sec) with swift boot. This lasted 2 days. I ran SFC again and that appeared to fix the issue again for 2 days.
There appears to be nothing wrong anywere,in fact the box works great. All my drivers and bios are up to date.
It's more of a PIA then a problem....What would be the possible causes for the box to hang on the GW logo for so long??
View 5 Replies
View Related
Apr 27, 2008
I'm sure some of the things that go wrong are due to the fact that my finger will sometimes twitch and depress the mouse button where it shouldn't put something into play on the bad side, but even so, I'd like to know how to fix the problems no matter thie origins. (I'm much better on that since I found the Steadymouse program.)
Not sure what you call the panels that ariced when you push the logo key between the left Ctrl & Alt, but things have disappeared over the past several months. The first I noticed was that the DOCUMENTS sign no longer took me to my documents folder, as it used to do. The other things have been happening (or not happening) in the past few weeks. I don't recall everything that used to be on the right side panel, but here's what's left:........
View 9 Replies
View Related
Mar 24, 2008
I've checked and General is "normal" and boot is not ticked.I get about 15 secs of blackness, 5 secs of progress bar at the bottom,another 10 secs of blackness and then Vista.If I tick no gui in boot, I get "aurora" for the whole duration with no progress bar.
View 9 Replies
View Related
Mar 23, 2008
I am unsure what has caused my problem, so I was hoping someone may be able
to shed some light on it for me. I am running, Vista Business 32bit. Everything had been working fine, but without any changes to hardware, software or drivers I now have resolution problems. Firstly, when I boot my pc up it all goes well until just after the ???Windows Vista??? logo at the bottom of the screen comes up (during boot) the monitor goes into standby mode. Now the only way I have found to get my monitor out of this is to unplug the DVI cable from the back of my tower and plug in back in. The monitor then runs as normal ??? SO THATS ONE PROBLEM. Secondly, when the above problem first happened (and this is still happening) my resolution is stuffed. My monitor can go up to 1680x1050 and my Video Card can easily handle this. (Which it had been doing). But now I can only achieve 1024 x 768.
View 6 Replies
View Related
Jun 27, 2009
i have a dell xps 630i thats running windows vista. on friday, around 230 eastern time, my computer crashed. when i went to turn it back on tho, i saw something different with the dell writing, and the intel logo on the bottom right corner. they both were covered with dots eveywhere. After that screen passes by, i got a different new screen that i never got before. it was a phoenix awardbios screen. and below that it said, floppy disk(s) fail (40).
never seen that before. when i try to start my computer up, i can either go to start up repair or start normally. when i do the start up repair( ive done it 9 times already) it says my computer cant fix the problem, and then i can either send or not the error report. and when i start it up normally, it goes to a blank screen. and then my computer goes into power save mode. anyone know whats up with it and how i can fix it.
View 6 Replies
View Related
May 18, 2008
When you open up a window (my computer)...you will notice the 'aero' logo in the bottom right corner of the window. How can that be removed or replaced...?
View 5 Replies
View Related
Aug 14, 2008
Its called Antivirus xp 2008 This thing just jumped on my computer and I can't uninstall it. I am runnind Comodo firewall and it was asking me about allowing a program and I might have allowed it on. It appears to have the windows logo on it but that doesn't mean much.
View 8 Replies
View Related
May 2, 2009
The first time vista launched I noticed that the sound at the opening logo screen was just a long hard screeching sound. Then when I started clicking around and installing my programs in the desktop environment I noticed that all the sounds had been replaced by horrific screeching sounds. After installing the Windows updates (hoping this might solve the sound problem) and my video drivers I restarted my pc. At the startup I still had the screeching sounds but now I also had white garbled lines on my desktop. When I started moving around my mouse cursor the screen started to get stuck at some places and white squares started showing up everywhere. Then finally, to end it all my pc just jumped to standby mode and all I could do is reset the pc with the powerbutton. When restarting the problem starts allover again. When starting up in save mode the white garble and squares don't show up, but the sound stays screechy.
View 4 Replies
View Related
May 14, 2009
Recently bought a Dell Inspiron laptop from Future Shop and having a
couple of challenges:
1. Regarding standard text signature at the end of an e-mail: I set up
going through tools, options, signature and want it to appear at the end
of each originally created e-mail and the end of each reply or
forward...in Arial and font size of 10. Works fine when I create an
e-mail, but for a reply or a forward appears as Times New Roman.
Anything I can do to ensure always shows as Arial?
2. Regarding attachments received with an e-mail: often unable to open
when I click on. Someone suggested saving the attachment to the desk top
and then opening...generally works but a pain to save. Someone suggested
the problem is that I don't have full Microsoft Office suite on the
laptop just what came with it-Microsoft Works. Attachements being sent
are not unusual...generally Word, Excel, PDF or PowerPoint. Any
suggestion so that I don't have to save to desktop?
3. Last question...laptop came with a webcam, the workings of which I
am new to. Doesn't always open/work when I click on its icon...window
opens and says " please plug in a supported webcam". Sometimes when I
unplug from internet and reboot computer the webcam works.
View 9 Replies
View Related
Mar 31, 2008
I am getting this error...seems to occur pretty randomly. Just reinstalled Vista twice (clean). Each time going from clean install to Vista HP SP1. Error seems to change a bit each time.
Problem signature
Problem Event Name:APPCRASH
Application Name:rundll32.exe
Application Version:6.0.6000.16386
Application Timestamp:4549b0e1
Fault Module Name:USER32.dll
Fault Module Version:6.0.6000.16386
Fault Module Timestamp:4549bdc9
Exception Code:c0000142
Exception Offset:00008fc7
OS Version:6.0.6000.2.0.0.768.3
Locale ID:1033
Additional Information 1:9d13
Additional Information 2:1abee00edb3fc1158f9ad6f44f0f6be8
Additional Information 3:9d13
Additional Information 4:1abee00edb3fc1158f9ad6f44f0f6be8
Extra information about the problem
Bucket ID:345306578
View 9 Replies
View Related
Mar 23, 2008
When writing an email, clicking on insert drops down various choices, but Signature & Business card are grayed out. Does anyone know how to use this feature? It was easy to set up in Outlook Express.
View 5 Replies
View Related
Apr 29, 2008
I created a signature in windows mail and it is inserted in every mail and reply at the bottom of the mail. However, I always reply on top of a message so that the person who receives my reply doesn't need to scroll down to read the (latest) reply. Now, I have to move the signature from the bottom to the end of my reply, above the original message I received. Is there any way to insert the signature on top of a reply instead of at the bottom?
View 6 Replies
View Related
Jan 31, 2009
I recently updated my drivers for my video card (an integrated Ati Radeon Hd3200)off of Ati/Amd's website. After instalation windows told me it did not have a digital signature so it would not be allowed to run. I tried to reinstall multiple times to no effect. The main thing is that I can not access my CCC ( Catalyst Control Center). Im running a out of the box Hp pavilion dv4 - 1222nr entertainment notebook pc. I have specs upon request. Sorry im not a verygood speller.
View 5 Replies
View Related
Mar 23, 2008
how I can create a signature in Windows Mail is I want to use a smiley or picture? I need step-by-step instructions
View 8 Replies
View Related
Oct 16, 2009
I have added a signature to my emails. How do I display a picture of an object under the signature information. I am not talking about attaching a picture to open when you click the .jpg in the attachment line at the top of the email. The picture I want to use is a .jpg file.
View 4 Replies
View Related
Jul 29, 2009
I have my signature as an html file and when i view it in IE it looks fine. But when I transfer it to my windows mail the img src is empty. it just shows src"" in the source code of the email and my image is just a blank box with an x in the upper lefthand corner. What during the transfer from html file to signature is making the image source path disappear?
View 4 Replies
View Related
Apr 7, 2010
When it is turned on it shows the HP logo and options like ESC, F9, F11, etc. But won't load any farther then that. This happened after they just shut it down one night and never worked again. I can't press any options at that screen, it's basically froze, Unless I start pressing it right when i turn the computer one and it will say for ex. above it "loading boot menu". It has never has passed that and gotten onto the POST screen.
Things I have tried- Unplugging various hardware like HD, DVD-ROM, took out the ram and tested one at a time in both slots, took out battery for 20m, reset CMOS from jumper on Mobo. Nothing I do is working. If anyone has an idea I would be more then happy to hear it.
View 9 Replies
View Related
