Medion Windows home vista; saved photos/files to D drive (recovery) by accident. Medion support said too complicated to do over phone, ask someone who knows about comps. I need to retrieve only my saved files, and not interfere with recovery files on D drive. I cannot clean up or retrieve data on D drive.
View 4 Replieswell i have a laptop with win vista 32 bit already installed on one partition.i have totally three partitions.one with the OS,one with the recovery partition and one just for my files.all three are on the same hard drive.now i recently got win 7 64 bit and want to do a clean install.can i do it without losing all the data in the recovery and other partition???
View 5 Replies View RelatedI can't update Vista 64 bit, went through everything with MS support, nothing worked. Module Installer keeps stopping. Will have to reinstall OS. I have 8GB of memory. Any tips and or advice before I have to wipe my C drive clean? I have 3 hard drives on my computer so the C drive is programs and I'll export my outlook mail stuff and bookmarks, anything else I should consider? Will the Vista 64 just pick up on the 8 GB or do I have to do something for it to find all the RAM?
View 7 Replies View RelatedI've been reading threads about getting the 'low on space' on D drive to find out how to clean up my drive after using it for back-up, unfortunately. I see a list of files that should be there are Dell, Program Files, Sources, Tools, Users and Windows. However, there are folders within folders within folders in these files in my D drive, so I'm wondering if I can safely delete any of them.
View 7 Replies View RelatedI have finally got my 64 bit DVD from Germany of all places I thought it would of been Ireland for UK delivery, the length of time it's taken I thought it was on a carrier pigeon from Redmond ! Now seriously..........I am perfectly confident about installing and gathering the required drivers (already have as you might expect) and checked any software probs. Here's the bit were I'm unsure.OK first it has to be a clean install, there is no upgrade path from Vista HP x86 to the same X64 version, for obvious reasons. I have a clean primary partition on a different HDD to the 32 bit version where I will install it, the thing is can I install a trial version for 30 days as you can with 32 bit ? I don't want to activate it which will I presume cobble my 32 bit install with which there are no problems whatever, so I really want to evaluate the 64 bit for at least a couple of weeks before deciding to keep it and waste the 32 bit install. I have no interest in extending the allowed activation period (that's assuming you don't have to do it straight off cos you got 32 bit already).To sum up, I want to install x64 on a clean new HDD, keeping the 32 bit on it's own drive, can I do this and run the x64 for 30 days or whatever before I need to activate with the same code as the 32 bit which I have to assume makes the 32 bit no longer a valid install.............not prepared to extend period or try to hide drives or any other obstensibly against EULA terms, just want to have a reasonable 'test' period before the decision of which to keep.If anyone can find information about this I will be grateful to say the least, as some will be aware I'm not exactly a novice installing systems or indeed researching, but for the life of me I cannot find any 'answer' to my ponderings, all very well theorising how it should reasonably work, I just like to be sure.
View 4 Replies View RelatedSystem showed that my E: drive (DVD RW) is full. The pie chart is blue. There is no options to disk clean or to compress like the OS C: and local D: drives. Can I or should I do anything about it?
View 7 Replies View RelatedI want to do a true clean re-install of Vista Ultimate, and wipe out all data on my hard drive (not a clean lite re-install). When I select drive D I'm told it's too small to use for the install. I'm unable to resize this drive.
View 5 Replies View RelatedCan I attach my infected Vista HDD into an XP set and do a Virus/Malware scan? Will it find and clean Registry items as well as files?
View 9 Replies View Related-> I started Deleting Files and cleaning space, yet my drive shows I'm -> losing space?? What is going on? Are you cleaning your temporary internet files, cookies and browser cache when you do you hard drive cleanup? You also might want to check and make sure that you uninstall software that you are sure you are no longer using.
View 5 Replies View Relatedhow i use my DATA D drive . When i open MY Computer i have a Acer C drive with 69.7 GB and a DATA D with the same GB , it may seem a stupid question but i don't have a good knowledge of computers
View 4 Replies View RelatedI have a Vista Ultimate operating system. I have two partitions: C and D. In C I have my windows and in D i had my documents. Last times the computer booted from the hard disk I had to repair my Vista to let me enter in the windows. Because of that I formatted my C partition, by deleting it and creating it again. And when I logged in my fresh Windows surprize. All the info in the old C partition was now in my D, and the old D is missing. Those were my documents! Is it possible for me to recover the data in the old D drive? I really need those. Can you recommend me a software program that can recover that data? I don't mind the price of the licence, as far as it works with great results.
View 4 Replies View RelatedWas installing software on my Dell Inspiron 530 with Vista 32 froze up. I rebooted but found that I lost all data in Drive D: Drive D: properties shows 0 bytes used and 0 bytes free. I tried to do a system restore but it says that I need to format Drive D:. When trying to install new software I get an Error Message: Error 1324.Thepath Program Files contain an invalid character
View 9 Replies View RelatedI recently got windows 7 and installed it onto an empty hard drive in my pc. I now have my old hard drive with vista on and my new hard drive with windows 7 on. The only problem is i have hundreds of programs and updates etc on my old hard drive that i really want to use with windows 7 on my new hard drive. Does anyone know how i can transfer over all the programs and data from my old hard drive to my new hard drive? I tryed just copying the files over but i dont have the registry settings on my new hard drive with windows 7, so none of the programs work
View 5 Replies View RelatedI crashed my computer and had to buy a new one. All my email contacts are on the old computers hard drive which I kept. How do I go about retrieving my contact information off of my old hard drive?
View 4 Replies View RelatedI have Vista Ultimate 64 installed on my new pc (AMD Athlon64 X2 6000+ processor, Asus M2N-E mobo, 4 X 1gb Kingston pc2-6400 ram, WD 500gb SATAII hard drive, Asus GeForce 8500GT Silent 512mb video card, Antec Sonata III 500W case, LG 20X DVD+- drive). I wanted to buy an external hard drive to transfer my family pics and vids from my XP box to my Vista box. Been reading about some external hard drives not working with Vista x64. I've also read that I might ned to re-install Vista with the external hard drive connected. Can anyone recommend an external hard drive that will work with Vista x64? Need at least 250 gb hard drive but maybe around 500-750 would be optimal (wife takes lots of pics/vids of the kid ).
View 9 Replies View RelatedI have windows vista ultimate 64.... its on my Ide Maxtor 200GB... which is very noisy and seems to lock up.... So I went and got a Sata Seagate (my prefered brand)... and downloaded the Disk Wizard software from Seagate to migrate drives.... rather than having to lose all my data and operating system etc. In and Ide to Ide situation, this works fine... you simply swap drives over once Disk wizard finishes....
But, when it finished and advised me to swap drives over... disconnecting IDE drive meant when I powered up PC, it would not boot, and gave me error message... NO IDE HDD Found!!! Obviously the boot manager is still looking for IDE drive.... So I then proceeded to use Vista Boot Pro... but this doesnt seem to want to run on my machine?... it shows in Task Manager, but nothing on screen... Not one to give up, I thought I would simply use the Vista Disc to boot to Repair mode....
I diconnected Ide drive... left Sata connected... powered up, disc started, got to Repair window... and it showed a window for drives which was empty... but had two tabs... install drivers and cancel... I chose to install drivers... from my motherboard disc as this contains the Raid drivers.. I assume thats what I need to install.... Anyways... was a waste of time, error message stating they failed... Chose the right ones...Via x64 etc...
I have a hard drive which i took out of an old computer and which has lots of data on it, i bought an external hard drive case and when i connect it to my computers, i have two one vista and one xp it tells me in computer management that it is unallocated, does this mean that i have lost all my data on the hard drive, also it shows up in device manager but not on my computer on the vista computer , and its the same on the xp computer, the blue led light on the external hard drive case stays blue for about 10
seconds then goes off, the hard drive is a seagate barracuda 7200.7 ,160 Gbytes, and the case is from ads technologies usbx-834.
I am having a quirky issue with my DVD drive and hopefully someone will know where to start. It seems that the drive will read CDs (opening them in iTunes) and music DVDs (playing in Mplayer), but the system completely hangs and freezes when trying to load a data disc. Specifically, the system will continually try and open the DVD (spinning away) and cause serious lag to the computer. When trying to eject the DVD, it will then cause the computer to freeze and require a reboot.
The data discs that I'm using are all programs that I've previously loaded on my XP install, so I know the discs aren't corrupt. I'm also running a 32 bit version of Vista, so I'm not worried about 64 bit compatibility issues. The drive is a Lite-on (DH-20A4P) IDE based drive, set as Master on the cable. There are no other devices hooked to the IDE cable, and the cable is also brand new (came with motherboard). Here's the steps I've taken thus far to diagnose the problem -- with no fixes working.
- Downloaded and installed newest drivers for the DVD drive
- Flashed the DVD drive firmware with most current version
- Uninstalled then reinstalled DVD drive through Device Manager
- Disabled autorun feature
- Checked connections from drive to motherboard
The drive obviously is working properly since I'm able to play CDs and DVD movies/music. It might be worth noting that I used this same drive to install Vista, but perhaps the updates horked my drive? I'm thinking this is a Vista software issue, but can't think of anything else to try. I'm also hesitant to wipe and reinstall Vista for such a small issue.
I went to Fry's to have my computer (HP Windows XP) looked at because it wouldn't turn on. I was told that my mother board was fried. So, I bought a new computer (HP pavillion with vista) and a hard drive enclosure and the guys at Fry's put my hard drive in it and told me that I would just need to hook it up, turn it on and drag and drop my files. I've tried that but it's not working.
View 6 Replies View RelatedIve been using my 500gb hitachi hard drive for along time now and its just about full, i have a new 1TB hard drive which is also more powerful.M Does anyone know how i can transfer all the contents from my old 500gb hard drive onto this new 1TB hard drive, as its running slow with only half a gb free space on it. I want to sell my old 500gb hard drive after i have transfered all my data from it to my new one.
View 8 Replies View RelatedI have hard drives from both Win 98 SE and XP machines. I currently use a system with Vista 32. Is it possible to hook up these drives to my Vista machine and transfer the data to the Vista drive?
View 8 Replies View RelatedI had my hard drive from my laptop die a few days ago. I was able to recover almost all of the files except for a few Windows file to an external hard drive enclosure. The old laptop was a Vista Home Premium unit and the new laptop is Ultimate. If it's of any consequence or usefulness, the recovery software I used was from R-Studio. How my files and programs to the new laptop I'm using? I contact Gateway for support and they were useless. Windows was not the issue, it was a faulty hard drive.
View 4 Replies View RelatedI can't gain permission to access a hard drive that has back data on it. Tried to upgrade BIOS success! Killed my OS? Reinstalled my OS success! Now I can't access my 2nd HDD? I am willing to format and start with a clean HDD but I need to get some files off of it first. I have tried several things but none see to work.
View 9 Replies View RelatedI have been successfully backing-up to my Freecom hard drive classic 3.5 500GB via Windows Live however the drive keeps on filling up rather than overwriting/updating the current data, which is what I'd assumed was supposed to happen. Is this how it goes or have I missed something? The only option I have is to delete the current data and start again every month which is a bit of a pain!
View 5 Replies View Relatedis it save to clean all the files that are checked. i will gain 2.57 gb. let me know please. i will post the picture on my next post. here is what is checked
View 9 Replies View RelatedData Protection is a counterfeit application which pretends to be a legitimate security tool. It is also from the same rogue family as Digital Protection, Your Protection, User Protection, Dr. Guard and Paladin Antivirus. The trojan based software starts its activities as soon as it installs onto your computer. Malware has no ability to detect and terminate the parasite. It only gains that user lose their vigilance and would buy a registered version of Data Protection application.
This is a fraud and dangerous for your computer. Behind an offer stands bad people who will use your money for malicious intentions. This application is not worth spending your money. As any malware this one will scan your computer automatically and will show fake results. You should ignore it. Do not fall for this blatant scam. Data Protection can also redirect your web browser to deceptive web pages that advertises “full” version of the security tool. Do not buy it, but choose decent anti-spyware application and terminate Data Protection upon detection. - the conclusion is that Malware bytes does remove it,, you need to download the lastest malware byte or update the one you got. Malwarebytes Anti-Malware - Free software downloads and software reviews - CNET Download.com
I am Using Vista Ultimate 64. I would like to tranfer my entire drive incuding all files and the Operating system From my current IDE HDD to a new SATA Drive of the sames size (500 Gig) I need the IDE Drive for an older computer ( The 40 Gig IBM Deathstar still functions great, but all programs seem more bloated these Days)
Anyway I went to Administrative Tools and Formated the New Drive NFTS with no Drive Letter. But I cannot get it recognized as a transfer device when I go to system backup. Can I use 'C' on the second and soon to be only drive? If I have to use E or F for now can I change it back later. would that affect the file system? I intend to Low level Format the IDE and try cloning the old machine's XP Drive (32 bit) to it in the second place.
I purchased a new PC and would now like to give my old PC. It had been upgraded from XP to Vista. I did a clean install with Vista and deleted the windows.old folder which was taking up space but the computer isn't as fast as it would be if I had formatted the drive before the install.
View 9 Replies View RelatedThose of us who installed SP1 may remember that there was a cleanup tool (vsp1cln.exe)There is now a tool for sp2 called compcln.exe See: SP2 Disk Cleanup Tool. Once this tool has been run, SP2 cant be removed
View 6 Replies View RelatedWhat application can I use to clean the registry. The one I had before doesn't work with 64 bit
View 7 Replies View RelatedClean install & SP1. If I do a clean install of Vista home premium will SP1 be the only Vista update that is downloaded and installed? I am wondering if all of the old updates are still hanging around somewhere that is listed in the installed history. Are there old files that could be removed after SP1 installation?
View 8 Replies View Related