I crashed my computer and had to buy a new one. All my email contacts are on the old computers hard drive which I kept. How do I go about retrieving my contact information off of my old hard drive?
View 4 RepliesI recently got windows 7 and installed it onto an empty hard drive in my pc. I now have my old hard drive with vista on and my new hard drive with windows 7 on. The only problem is i have hundreds of programs and updates etc on my old hard drive that i really want to use with windows 7 on my new hard drive. Does anyone know how i can transfer over all the programs and data from my old hard drive to my new hard drive? I tryed just copying the files over but i dont have the registry settings on my new hard drive with windows 7, so none of the programs work
View 5 Replies View RelatedI have Vista Ultimate 64 installed on my new pc (AMD Athlon64 X2 6000+ processor, Asus M2N-E mobo, 4 X 1gb Kingston pc2-6400 ram, WD 500gb SATAII hard drive, Asus GeForce 8500GT Silent 512mb video card, Antec Sonata III 500W case, LG 20X DVD+- drive). I wanted to buy an external hard drive to transfer my family pics and vids from my XP box to my Vista box. Been reading about some external hard drives not working with Vista x64. I've also read that I might ned to re-install Vista with the external hard drive connected. Can anyone recommend an external hard drive that will work with Vista x64? Need at least 250 gb hard drive but maybe around 500-750 would be optimal (wife takes lots of pics/vids of the kid ).
View 9 Replies View RelatedI have windows vista ultimate 64.... its on my Ide Maxtor 200GB... which is very noisy and seems to lock up.... So I went and got a Sata Seagate (my prefered brand)... and downloaded the Disk Wizard software from Seagate to migrate drives.... rather than having to lose all my data and operating system etc. In and Ide to Ide situation, this works fine... you simply swap drives over once Disk wizard finishes....
But, when it finished and advised me to swap drives over... disconnecting IDE drive meant when I powered up PC, it would not boot, and gave me error message... NO IDE HDD Found!!! Obviously the boot manager is still looking for IDE drive.... So I then proceeded to use Vista Boot Pro... but this doesnt seem to want to run on my machine?... it shows in Task Manager, but nothing on screen... Not one to give up, I thought I would simply use the Vista Disc to boot to Repair mode....
I diconnected Ide drive... left Sata connected... powered up, disc started, got to Repair window... and it showed a window for drives which was empty... but had two tabs... install drivers and cancel... I chose to install drivers... from my motherboard disc as this contains the Raid drivers.. I assume thats what I need to install.... Anyways... was a waste of time, error message stating they failed... Chose the right ones...Via x64 etc...
I have a hard drive which i took out of an old computer and which has lots of data on it, i bought an external hard drive case and when i connect it to my computers, i have two one vista and one xp it tells me in computer management that it is unallocated, does this mean that i have lost all my data on the hard drive, also it shows up in device manager but not on my computer on the vista computer , and its the same on the xp computer, the blue led light on the external hard drive case stays blue for about 10
seconds then goes off, the hard drive is a seagate barracuda 7200.7 ,160 Gbytes, and the case is from ads technologies usbx-834.
I went to Fry's to have my computer (HP Windows XP) looked at because it wouldn't turn on. I was told that my mother board was fried. So, I bought a new computer (HP pavillion with vista) and a hard drive enclosure and the guys at Fry's put my hard drive in it and told me that I would just need to hook it up, turn it on and drag and drop my files. I've tried that but it's not working.
View 6 Replies View RelatedIve been using my 500gb hitachi hard drive for along time now and its just about full, i have a new 1TB hard drive which is also more powerful.M Does anyone know how i can transfer all the contents from my old 500gb hard drive onto this new 1TB hard drive, as its running slow with only half a gb free space on it. I want to sell my old 500gb hard drive after i have transfered all my data from it to my new one.
View 8 Replies View RelatedI have hard drives from both Win 98 SE and XP machines. I currently use a system with Vista 32. Is it possible to hook up these drives to my Vista machine and transfer the data to the Vista drive?
View 8 Replies View RelatedI had my hard drive from my laptop die a few days ago. I was able to recover almost all of the files except for a few Windows file to an external hard drive enclosure. The old laptop was a Vista Home Premium unit and the new laptop is Ultimate. If it's of any consequence or usefulness, the recovery software I used was from R-Studio. How my files and programs to the new laptop I'm using? I contact Gateway for support and they were useless. Windows was not the issue, it was a faulty hard drive.
View 4 Replies View RelatedI can't gain permission to access a hard drive that has back data on it. Tried to upgrade BIOS success! Killed my OS? Reinstalled my OS success! Now I can't access my 2nd HDD? I am willing to format and start with a clean HDD but I need to get some files off of it first. I have tried several things but none see to work.
View 9 Replies View RelatedThe Hard Drive LED light on my Sony Vaio keeps blinking EVERY SECOND. When it's really quiet I can hear it too, it's constantly writing. Constantly. I did my research - read all the threads on the net and so far I have disabled:
Windows index
Windows defender
Windows search
Superfetch
System Restore
Readyboost
Defragmenter
I have uninstalled google desktop.
The system is totally virus and spyware free, and the anti-virus is not scanning (schedule scan disabled). All Vista updates are installed. Nothing has helped. I've run out of things to disable. I'm running Vista Business SP1, Dual Core 2.2 Ghz, 3 Gb RAM.
I have a ASUS laptop running Vista Home Premium, 64 bit OS. I have several programs that I use but no loner have the insall disks for. Should I have to reformat in the future I would hate to lose them. Here's what I'm thinking: Buy a extrenal hard drive. Seagate, 1Tbit, usb, cost $90.00. Copy my hard drive to it. If I need to reformat. Reinstall Vista from my recover disk that came with the computer. Then copy files from external drive. Bingo. All my old programs would be there and working. Question is: Can this be done?
What file/folders do I need to copy to the external drive?
I would like to copy all the contents from my boot drive to a new hard drive recognized by the BIOS. Easy Transfer Wizard works between two systems not a single system... I want to copy all my data including the hidden and system files to the new drive and then reconfigure the boot sequence to boot from the new drive... Western Digital has a utility that works with XP but not with Vista... what is the best way to move this data... will drag and drop move everything?
View 5 Replies View RelatedMy understanding is that a ready boost drive is a usb drive that vista uses to dump data to, rather than a hard disk as the readyboost drive is considered to be faster than the hard disk. So if my comment above is true, and I can now buy a 32gb readyboost drive for $70, is it a good idea to install games such as FsX onto a readyboost drive, and get better performance than using a HDD...
View 4 Replies View RelatedIs it possible to copy my entire hard drive onto an external hard drive. Vista Premium, all the data, etc. and what would be a good software to accomplish this?
View 5 Replies View RelatedI have an external hard drive, I reformated it so I could use Vista's backup.Now it seems that when my brother inlaw tries to put some music files(Itunes) that the hard disc is unavailable to his computer. At this stage it seems that Vista has conned me into destroying a perfectly good WD harddrive!I have created a second partion on the hard drive and I am reformatting that, as I write this, but the only formatting option seems to be this NTFS, and that is what I had already formatted the ExtHD to so I think this formatting will be to no avail!From what I can figure I need to format into FAT but I tried a quick format an ex-fat option was there, but the problem was the same. I am becoming more frustrated with Vista, seems I just keep running into things that should be simple and aren't!
View 4 Replies View RelatedI have 17 accounts in Windows Mail. When I first start up WM, and go to retrieve mail,. all accounts work fine. But then any subsequent attempt to retrieve mail, and the process ignores the first two accounts. No errors, no message. It's just listed along with the others, but blank in the status column. And no errors reported either. So then if I exit WM and start over, it works fine again... for that first time. And then it's back to the same problem.
View 9 Replies View RelatedI can only retrieve my mail at start up. I can't get mail when I click on Send/Receive or automatically. I only get an error message when I click on Send/Receive...no other time. It says that an error has occured and to check the details below...but there is nothing below.
View 9 Replies View Relatedhow i use my DATA D drive . When i open MY Computer i have a Acer C drive with 69.7 GB and a DATA D with the same GB , it may seem a stupid question but i don't have a good knowledge of computers
View 4 Replies View RelatedI have a Vista Ultimate operating system. I have two partitions: C and D. In C I have my windows and in D i had my documents. Last times the computer booted from the hard disk I had to repair my Vista to let me enter in the windows. Because of that I formatted my C partition, by deleting it and creating it again. And when I logged in my fresh Windows surprize. All the info in the old C partition was now in my D, and the old D is missing. Those were my documents! Is it possible for me to recover the data in the old D drive? I really need those. Can you recommend me a software program that can recover that data? I don't mind the price of the licence, as far as it works with great results.
View 4 Replies View RelatedMedion Windows home vista; saved photos/files to D drive (recovery) by accident. Medion support said too complicated to do over phone, ask someone who knows about comps. I need to retrieve only my saved files, and not interfere with recovery files on D drive. I cannot clean up or retrieve data on D drive.
View 4 Replies View Relatedwhen booting up from a vista cd I accidentally had my usb external hard drive plugged in and the drive has been emptied and replaced by windows there are sintimental photos etc on the drive can anyone help me to restore them
View 9 Replies View RelatedDoes 'Local Disc' D mean it is a drive inside my machine or could it be my external hard drive?
View 9 Replies View RelatedI was wonder if anyone know a solution for the following problem. I have a ethernet hard drive and I've never had a problem until using vista and windows server 2008. both operating systems are unable to browse the drive, instead it completely crashes explorer.exe. Windows server 2003 & XP have never had trouble.
View 6 Replies View RelatedWinMail was working fine after logging off last night. Starting today e-mail does not arrive in my Inbox, cannot send mail either. When I click the Send/Receive button, a Windows Security pop-up appears and requires me to logon to my account. This has never happend before. Any info I put into the username and password do not log me on to my own mail. What gives? I have owned this machine for just over one year.
View 9 Replies View RelatedWas installing software on my Dell Inspiron 530 with Vista 32 froze up. I rebooted but found that I lost all data in Drive D: Drive D: properties shows 0 bytes used and 0 bytes free. I tried to do a system restore but it says that I need to format Drive D:. When trying to install new software I get an Error Message: Error 1324.Thepath Program Files contain an invalid character
View 9 Replies View Relatedi bought a kit for an old hard drive. i got it to work once ealier today, and now it doesn't work. when i plug it into the usb, it will not successfully install. the kit is a rocketfish hd 35, the hard drive is seagate u8 model st313021a. the "remove hardware" icon appears in the tray, but no designated lettered drive appears on the computer.
the hard drive was part of an older tower that i couldn't get to boot. it's strange because just today i accessed the hard drive and located old pictures, music and other files that i hadn't seen in a few years. had i known this would have happened i would have started saving right away. i thought i had it working.
I've upgraded my machine at some point in the last year, where I added a new 500GB drive and moved my C: partition across to it. The previous 250GB drive was left in for additional storage. Just recently (while upgrading my BIOS) I realised that my system was still booting from the 250GB drive even though Windows was on the other disk. There is a fair possibility in the not too distant future that I'll replace the 250GB disk with a larger disk, in which case I won't be able to boot. Is there a safe and reliable way to change it so that the system boots from the 500GB disk?
View 9 Replies View RelatedI was starting my computer today (that has Vista), and during the start up process, a black screen came up stating that there was an error opening up my external hard drive and it was checking for errors. After it finally booted up, I went to open the hard drive files, and it was totally BLANK! I then restarted the computer, and still the hard drive is EMPTY! I had ALL my important files in there!
The ONLY thing that looks promising is that when I go to Start then to Computer, it shows the hard drive there, and it still shows that 43GB are free of 111GB of storage (same info shows by right clicking on it and going to Properties). Why would it show this if nothing is on the hard drive anymore? Is there ANYWAY to recover these files again you think???? I NEED those files!!!! Remember that the hard drive STILL PHYSICALLY WORKS. It's just that I cannot access the files on my pc at the time for some reason.......
I just bought and installed a external hard drive. I am fairly knowlegable about computers but this is my first Ex. Hard drive and know very little about there use. So what I want to know is how to save my Family Tree Makers files to it. And once I do that how do I know for sure it is opening from my new drive and not my computer C: drive? I saved it to a DVD one time but when the time came when I needed it all that was there was a short cut but no files.
View 5 Replies View RelatedI am having a quirky issue with my DVD drive and hopefully someone will know where to start. It seems that the drive will read CDs (opening them in iTunes) and music DVDs (playing in Mplayer), but the system completely hangs and freezes when trying to load a data disc. Specifically, the system will continually try and open the DVD (spinning away) and cause serious lag to the computer. When trying to eject the DVD, it will then cause the computer to freeze and require a reboot.
The data discs that I'm using are all programs that I've previously loaded on my XP install, so I know the discs aren't corrupt. I'm also running a 32 bit version of Vista, so I'm not worried about 64 bit compatibility issues. The drive is a Lite-on (DH-20A4P) IDE based drive, set as Master on the cable. There are no other devices hooked to the IDE cable, and the cable is also brand new (came with motherboard). Here's the steps I've taken thus far to diagnose the problem -- with no fixes working.
- Downloaded and installed newest drivers for the DVD drive
- Flashed the DVD drive firmware with most current version
- Uninstalled then reinstalled DVD drive through Device Manager
- Disabled autorun feature
- Checked connections from drive to motherboard
The drive obviously is working properly since I'm able to play CDs and DVD movies/music. It might be worth noting that I used this same drive to install Vista, but perhaps the updates horked my drive? I'm thinking this is a Vista software issue, but can't think of anything else to try. I'm also hesitant to wipe and reinstall Vista for such a small issue.