I am using a 19" HD flat panel TV as an external monitor for my laptop (Win7). Text was crisp and clear with the RGB connection but when I switched to HDMI (to get the audio also) the text got pretty blurry (graphics are still pretty good). I've tried adjusting the resolution, the Clear Type text, and the Smaller 100% and Medium 125% settings but nothing seems to help. I've also tried various adjustments on the TV to no avail.
View 9 RepliesI'm new to a x64 OS, I did have Home Premium (32bit) on my PC but upgraded yesterday. Since upgrading (clean install) I've notice that the boot times are longer and the shut down times have increased significantly. One of the reasons I moved to x64 was because of the faster boot and shut down times. A few other programs are taking longer to load/respond but I'm not sure if that's because they are 32bit programs running in a x64 environment....
View 4 Replies View RelatedI have a GTS 250 and when playing Crysis on Very High 0xAA 1024x768 i get horrible framerates. (12-18FPS) I change everything to LOW settings and the frames still are the same.
View 9 Replies View Relatedon every web page i go on i am having to press shift+a to improve the picture quality, i have to do this on every page. its very annoying. how to i make it so i dont have to ores the darn shift key??? the grapics seem very blurred and not clear.
View 5 Replies View Relatedit is particularly poor (broken up) on such sites as Internet although it wouldn't win any prizes either when playing cds or mp3 files. i am not very critical sound-wise so it has to be poor for me to notice. there is a slight issue with my monitor speakers but the sound is still poor on headphones connected to the line-output socket.
my setup is vista 32-bit premium, audigy se sound board, intel 1.8ghz dual-core, 2gb ram and an msi micro-atx mb. i have loaded what i believe to be the latest sound drivers although things are actually marginally better with the on-board, realtek hd sound chip. btw, my download speed is reasonable at about 5mb/s.
After waking the PC each morning the mouse (MS Wireless Optical Mouse 2.0) exhibits poor scrolling. A significant amount of wheel rotation will result in a jerky and slow scroll. Before sleep it is perfectly smooth. I have tried disabling the power save option - no improvement. I am using the latest drivers from MS (6.31.230.0 dated 26/11/2008) Vista Business SP2.
View 4 Replies View RelatedI just bought a new 64 bit computer with 4GB RAM and 3.1 GHz AMD Athlon64 AM2 Dual Core 6000+. Also got Windows Vista Home Premium 64 Bit. But my problem is that the sound is awful, it sounds like tapes in a cassette player when the batteries are running down, with added dropouts and crackles, especially when I minimise the media player when playing audio files, (i've tiried WMP, VLC, Zoom and WinAmp). Any videos I stream on the net also sound like this. AVI's also have poor sound quality and can also be "sticky" the picture not running smoothly.
My soundcard is fine, i've run different ones on the machine and they all sound like this, my amp, cables and speakers are working perfectly too. I never use more than 1.5GB RAM and about 20% of the CPU according to TaskManager.
I have a new computer with Vista Home Premium x64. I used a dual monitor graphics card in my old computer with Windows XP. Took the card out and install it in my new computer and updated the driver. But, performance is poor. For example I can't use Vista Aero. I would like to buy a new, relatively inexpensive dual monitor graphics card which is compatible with Vista premium x64.
View 5 Replies View RelatedFor some weird reason the fonts in vista 64 are blurry when in the middle of my screen. if i scroll up or down then the blurry text goes clear and the text above it goes blurry. i have tried.. turning on and off clertype.. i just bought a brand new lcd.
View 6 Replies View RelatedSpecs:
Monster Ultra 800 HDMI Cable
Viewsonic 2835M (1920x1200 max resolution)
Nvidia 8400M GT 256MB Dedicated / 1GB shared
Sony Vaio Laptop VGN-FZ290
Vista Ultimate x64
Nvidia driver (laptopvideo2go.com): 7.15.11.6369
Problem:
When using HDMI connection instead of VGA, the font quality is blurred and distorted. I tried at least 4 different brand new hdmi cables and know for sure it is not the cable NOR the laptop NOR the monitor itself. It is a setting somewhere along the line. I've tried this on 2 laptops, 2 monitors (same brand/model), all same issue.
I set resolution to 1900x1200 and tried 1900x1080 (both 32bit). No normal quality at all. VGA is fine, but I prefer hdmi for higher quality - at least once I get it fixed. I tried 59hz and 60hz,
I used to connect my HP Pavilion dv9260nr Notebook to my Sharp Aquos LCD tv through an HDMI cable and got audio and video w/ no problems. About 2 months ago I reinstalled Vista Ultimate x64. I haven't tried to reconnect until recently and now I get video but no audio.
I have tried to set SPDIF Interface to default like I used to but it doesn't work. You can see the green "mixer" bar moving, but I can't hear anything. Also, when it's set to default the configure box is greyed out.
I have the latest Conexant High Definition Audio Driver, 4.33.1.61.
I also have Vista Codec pack v511 installed.
Seems like I need to "enable" hdmi somewhere but I can't find anywhere to.
I am researching this for my wifes laptop and I am posting/doing this currently from a work computer that is on a very slow network thus using search is very painful at work (otherwise I might not be asking this question).
Connected pc to lcd via hdmi - no problems. picture - good, no issues as of yet audio going through the tv - sound from all sources except dvd's - digital output/sound is enabled. The DVD sound does play through the laptop speakers while watching the movie. used various DVD playback software all = no sound from tv
I got a Sharp TV, 32" LC32GP3U-B (1080p full). I connected an hdmi cable from my laptop (also 1080p full) to the TV. My laptop screen dropped to Vista Basic theme in 16bit color mode and I can bring it back up to 32bit. Why is that? Inside my Nvidia control panel I was unable to change color depth. I cannot view on the TV display if I use single or clone mode. Everytime I try to set it to single or clone mode, it reverts to laptop display instead. Why?
A strange problem, when configuring Media Center, I chose TV as output. Now the color, contrast, gamma, etc is perfect on the TV itself and Media Center interface. However, when viewing the test videos to adjust the settings, the video is nearly black, dim, yet the interface to Media Center is perfect, so is viewing regular TV mode (w/o hdmi to the laptop) and even when HDMI is plugged in, quality is superb when using programs displayed on the TV. I did choose hdmi as connection type in MC, but why is the video so dim?.........
I just got a new LCD monitor for my PC that has a HDMI port. I have a couple of newb questions about HDMI on the PC.
1. Will the image quality be any better?
2. I mainly play games on my PC. Will using the HDMI be better or worse?
3. I have a HT Omega Claro + audio card. Will using HDMI effect this audio card?
My video card is a Sapphire 4870 card. I virtually know nothing about HDMI on PC's.
I just got a Dell Utrasharp 2408WFP. I'm very pleased with the monitor but have read that, as it's an S-PVA panel, input lag will adversely affect games performance.
Also read, maybe on this forum, that a DVI to HDMI adapter will greatly improve things.
I have such an adapter cable.
Can anyone confirm that it would be better than the DVI to DVI I'm currently using?
I am connecting to a BFG 8800GTS OC 512MB which has 2 DVI ports so should I use it in addition or instead of the DVI to DVI?
I have the computer HDMI hooked to the receiver HDMI and the receiver HDMI output hooked to the LCD HDMI input. I see Vista DESKTOP on the TV but do not have sound. When I go into the Realtek HD Audio Manager I do not see an option to Choose Digital Output device HDMI. Bios does not have an HDMI choice. I tried driver updates did not work. I have another Media Center PC. which I connected the same way the HP is connected I do get Video and Sound.
View 9 Replies View RelatedI just bought an Acer Aspire AX1300 with Windows Vista Home Premium 32x and an Nvidia GE 8200 video card for storing data and, more importantly, to play shows and movies through my 1080p Mitsubishi HDTV. It is connected through native HDMI and the cable is high quality and works perfectly fine with my Gateway laptop to the same TV.
The video looks great as long as the screen is static, like on the desktop or surfing most websites. But as soon as any motion or video is displayed the screen starts to frequently flicker every couple seconds, and sometimes cuts out to black completely for 3-5 seconds, until the TV picks the signal up again........
I have 64 bit vista ultimate, when I connect mt laptop to tv via HDMI cable and play any movie, TV screen flickers. but runs OK on laptop screen. Also if I connect my laptop to tv via s-video then this problem goes away. I do not know why....
Is there any setting to done on TV or on laptop to rum via HDMI. Please advise.
I have an HP laptop, a Pavillion dv9000. I recently got an hdmi cable to connect it to my tv. I was able to get it to work the first time, but subsequently when I've tried my mouse cursor disappears. I can still toggle icons and such using the keyboard but it's a pain. any thoughts on why this is happening or what to do to fix it?
View 7 Replies View RelatedIs it possible to connect a vista media center to a HD set top box receiver and then connect the media center to a tv again via HDMI. If this is possible has anyone got any suggestions / recommendations on what type of card i would need.
View 6 Replies View RelatedI do not get the full screen output on my TV when connected via HDMI. This is very frustrating. The TV itself works fine in full screen (1080p, 720p, 480p, etc). I DO get full screen output on any Linux o/s I test it with, via hdmi. However, I prefer to use Vista instead in order to use MCE and the plugins I have (Netflix, Joost, etc plus MCE remote). I duplicatedt this before and after upgrading to Vista SP1. I've duplicated this with many WHQL certified NVidia drivers as well. Literally at least 5-10 different driver versions for my 8400M GT card.
I cannot figure out why it is not showing full screen output, but I can confirm this happens in Vista only, not Linux (did not and will not test in XP). My index score in Vista is 5.0. It was actually 5.3 at one time, then dropped to 5.1 and 5.0 over few months span...........
I recently bought a HD Camcorder. I bought Pinnacle Studio Ultimate to edit my film. I am able to connect my camcorder to my laptop using USB, but the software doesn't recognize my camera. It says I need to use Firewire or 1394 port. When I hook my camera up with HDMI, the camera and computer do not recognize each other. I know the HDMI works, because I've used it for my TV. I am not sure what the Firewire port is, or if my laptop has on?I much rather use my HDMI port. Is there a way I can get my computer to
recognize devices hooked up through HDMI ? I am using Windows Vista.
Which is the maximum length for using the HDMI cable? Ok what i want to do is. I will like to connect my PC Graphic card Ati Radeon 3870x2 with my HDTV Samsung LE40A656F1 1080p 100Hz LCD 50,000:1 Both are 1080p capable and they have HDMI. But they are in separate rooms,the distance from pc to tv is 50ft long.
1)Is there any problem to use 50ft long HDMI cable?
2)Is there any <<special>> HDMI cable for 1080p?
3)Which is the best brand for the best results?
4)How do i know if my HDMI cable is 1080p capable?
(The main usage for my pc is gaming in 1920x1080 resolution and watching HD movies) I forgot to write that i already have 1 connected tv in my graphic card and i want to connect a SECOND tv in the SECOND hdmi of my card. Is that ok? i will find any problems in picture quality,sound or anything else? The purpose of all this is to play(1920x1080) games in my room,and watch 1080p movies in the living room. How i enable the second tv view in my card? (Btw i found a 15metres HQ hdmi cable) is that a good brand?
I use HDMI port to connect my Sony Vaio with Vista Home premium to Samsung full HD LCD TV to watch the movies using VLC player, after I disconnect the cable all the Icons get messed up on desktop & I have to rearrange. Can anybody has solution for this.
View 8 Replies View Relatedwhy is ccc only showing these options im using hdmi cable and need to use the {overscan i think its called} because ive got big gaps around my screen the native resoloution is 1024 * 768 or, is there any freeware software which i could zoom my screen in a bit (i posted this on ati forum but its been a day and not 1 view so im posting it here}
View 4 Replies View RelatedHere is a run down of my set up and something interesting at the end.
My main PC in my office has 6TB of drive space. It stores about 200 DVD's of my 1000 collection. I have 4 XBOX 360's in my home and my home is completely wired in cat6.
The movies are stored as mpegs so the 360 units can stream them. I use Media Center with MyMovies2 for the collection interface. I was never happy with the picture quality and loss of bonus features with the mpegs. So it was time to build a killer streamer. The HTPC I just built , specs below, is to stream from the 6TB PC as well as play any discs I have not ripped yet. MyMovies2 also has the ability to stream Blu-Ray and HD-DVD ISO files when used in conjunction with Power DVD, AnyDVD and Daemon Tools.
HTPC:
Asus PQ5-EM Motherboard-Intel G45 Chipset onboard HDMI Video /Audio
Intel E8600 CPU
ADATA DDR2-800 4GB
Asus Blu-Ray Drive
Currently the Asus P5Q-EM is running Vista 64, MyMovies2(client), AnyDVD, Daemon Tools and Power DVD 7.3.
If you open up available HDMI Audio Devices I have 2. One is the Intel that Actually works and the other is a Microsoft that says it works, but even if I set it as default it gives nothing. So the Intel HDMI Audio is Default.
I have it configured to 7.1 speaker set up.
In this Set up Power DVD and Media player work great. I can stream Blu-Ray and play anything at all in 7.1 or 5.1 what ever the source has to offer.
Now in Media Center I go to configure the audio set up and the first question it asks is what type of connector are you using for audio. RCA, SPDIF, Coax ETC but no HDMI.
Whatever I choose give me no audio in media center and the videos will lock up in about 1 minute.
So I start the set up and then cancel. Once you lose the audio it is gone for navigation within Media Center also. Restarting Media center gives you back your navigating audio.
Now if I go back to Audio Devices available and select Intel HDMI and change it to 2CH. I then get full audio and 5.1 from the mpeg movies through Media center. But now Blu-Rays only give 2CH no matter what, whether streamed or from the disc.
Ok, here is the funny thing.After playing with settings and drivers for awhile, I had the Intel HDMI set for 7.1 and then tried Power DVD both from disc and streaming Blu-Ray, worked perfectly, Tried Media Player with the Mpegs, worked perfectly, Opened Media Center then My Movies2 and loaded up a Blu-Ray stream, It worked perfectly. The I loaded up an mpeg movie in my movies and it played perfectly in 5.1. I then tried several mpegs and they all worked.
What I found is when you go into Media Center, If the first thing I play is a Blu-Ray stream it somehow tells media center how to hook up correctly to the HDMI Audio. Once I stop the Blu-Ray stream I can play any movie I have stored on the 6TB server with no problem through Media Center. Once I close Media Center it goes back to wanting 2CH. As long as I play A Blu-Ray first in Media center then everything will work like it is supposed to.
i got a new graphics cards fitted to my pc as my last one died the new card is a Radeon hd4770 the problem is that i cant get audio sound through hdmi wire when i am sending the signal to my tv. when i go on playback option on sound config page it says ATI HDMI OUTPUT not plugged in and wont let me enable it.
View 7 Replies View RelatedI'm trying to connect my Acer Aspire x1700 (Vista Home Prem) to my Sony Bravia TV using an HDMI cable. Both the PC and TV have female HDMI jacks and I thought I followed the install steps as per the instructions but no joy!!
View 5 Replies View RelatedGot something on my mind that has been bugging me for awhile I have my system hooked up via optical digital to my 7.1 surround sound amp for sound.For video output, DVI from GPU card via HDMI to HDTV. Couldn't I just hook up my HDMI to my amp then another HDMI to the HDTV?? This would eliminate the need for the optical wire, and maintain a lossless crystal clear sound, and still provide the 1080p picture.
View 4 Replies View RelatedWhen I try to play video or audio files on Media Center through the TV via HDMI, the video and audio is very laggy. It also sounds sort of static like. When I play CD's or DVD's the problem is resolved. Also, when I unplug the HDMI, the problem is resolved. Also, when I minimize Media Center, the problem is resolved. It only happens when the HDMI is plugged in and Media Center is Maximized. I have searched all over and have not been able to find a solution to this problem. I have tried changing the HDMI cords and changing the HDMI input on the TV. I've also tried to use a different TV and no luck.
View 6 Replies View RelatedI have a laptop (Dell XPS M1330) running Vista Home Premium 32bit featuring an HDMI port and, as far as I can see, a soundcard called SigmaTel High Definition Audio. I regularly watch videos on my LCD TV using HDMI and I am constantly annoyed by the fact that the audio output doesn't automatically switch over to HDMI when the cable is connected (or vice versa when the cable is disconnected).
One would expect it to do so as this is how it generally works when f.ex. headphones are connected and indeed, on my laptop, the audio switches from speakers to headphones automatically without any problems. My solution to the problem is to manually change the default output device to HDMI and then restarting the media player. I cannot see why this operation cannot be automatic, and therefore I ask of you all if there is any way to accomplish an automatic switch from speakers to HDMI when an HDMI cable is connected