Sysprep Create Reboot Loop
Feb 6, 2009
I have created a Vista Enterprise x86 image several times and tried tosysprep it. I used the 'sysprep /oobe /generalize' command. When thecomputer boots after I have syspreped it I get a black screen that says'Setting up your computer' or somthing similar. It then displays thevista background and says 'Please wait while Windows continues settingup your computer'. The machine then reboots and the green loading bar shows for a second and reboots. The machine is then stuck in a reboot loop. Not even safe mode or Last known good config will let the machineboot.lso I had several days of pain trying to get the vista to sysprep at all. My vLite SP! slipstreamed disc didn't allow syspreping and erroredout. I had to install vista and manually install the SP1.
View 9 Replies
ADVERTISEMENT
Feb 23, 2009
I was trying to get my sister's computer running. It is the worst case I have ever seen. It was giving me pop-ups trying to open control panel. It will not let me run Spybot, Malwarbytes anti malware. Folder options are gone from control panel, among other things. I tried a to run these programs. Went into safe mode.....would not let me run them there. I downloaded CCleaner in safe mode and ran the cleaner.(not registry cleaner) Now it's stuck in a reboot loop. What can I do to get it back to at least booting? Never seen this before. This is XP media center edition When I first got there it was popping up "my documents" from a user who didn't even use the computer about every 5 minutes.
View 4 Replies
View Related
Mar 23, 2008
I dont know which of the folliwing the problem is. I am running Vista 64Bit OS with Corsair memory at 4GB - all works well. But regardless of the memory, when I install an additional two modules to upgrade the computer to 8GB - Vista goes into the gut wrenching boot up reboot loop. When I go into safe mode, the last driver Vista attempts to load is the crcdisk.sys. But as I have read in the forums, this is the last driver loaded so it does not neccesarily mean that this driver is the problem.
View 7 Replies
View Related
Feb 24, 2009
I've been trying for months to create an image using the Vista Sysprep. We use a simple unattend.xml file; but not matter what it crashes.Here are two logs from my most current attempts:settuperr:
2009-02-20 13:31:21, Error SYSPRP MSS: Failed to kill Windows Search service![gle=0x00000425] 2009-02-20 13:31:21, Error [0x0f0082] SYSPRP LaunchDll:Failure occurred while executing 'C:WindowsSystem32mssrch.dll,MSSrch_SysPrep_Cleanup', returned error code 1053 2009-02-20 13:31:21, Error [0x0f0070] SYSPRP RunExternalDlls:An error occurred while running registry sysprep DLLs, halting sysprep execution. dwRet = 1053 2009-02-20 13:31:21, Error [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep cleanup providers; hr = 0x8007041d I never had any problems using sysprep with XP, but this VISTA has me banging my head on the desk!
View 4 Replies
View Related
Mar 20, 2009
I have spent several hours setting up a Vista machine. On it I had the Adminstrator account enabled and a standard user account. I took a backup, using the standard Vista backup, of the machine prior to sysprep. I also took a ghost image once the machine had syspreped and shut down. On reboot it appears the Administrator account has disabled itself which I realise is the default state for the account. I therefore have no admin account live on this machine. Does anyone know if there is a way to re enable this account if there is no other administrator account active, or could I use the MS backup that I took prior to disabling to restore it back to it's pre sysprep state.
View 7 Replies
View Related
Jul 29, 2009
I'm pretty new to sysprep. I'm looking to run a task AS sysprep finishes, but before a user logs in. Basically I would like to make a web service call from a .vbs file to announce that the computer has finished sysprepping. I want the time to be as accurate as possible. If I run this in the specalize pass, it's too early since sysprep still has a lot to finish. In the OOBE step, it's too late since it requires a user to login.
View 5 Replies
View Related
Jun 16, 2009
now i tried to run sysprep for Windows Vista i just install on the PCs, but i was not success to do it. When run sysprep with this command "sysprep /oobe /generalize /unattend:unattend.xml" it will auto delete all drivers installed on vista. The things there are i want to make 1 image Vista Bussiness installed drivers, default enabled administrator account (normally when run sysprep it will disabled administrator account).
View 7 Replies
View Related
Sep 13, 2009
I am running Windows Vista Home Premium 32 (system specs: laptop 2.1 Ghz core 2 duo, 4 gb RAM, 500gb hd (about half full) nvidia 8400M GS, Avira Premium Security Suite). I have had the computer for about a year running fine with 1 main admin account. Now when I need to create an account for another user I cannot create one, either admin or standard. When I create it, using either the control panel or command prompt, it creates the user picture, making the account visible on the control panel user accounts screen, and on logon screen. However, when trying to log into the new account I am greeted with the error "User profile service failed on logon. User profile cannot be loaded." The standard fix for this from various forums is to edit the registry key of the account. However, on going to regedit I see that no key even exists for the account. On further investigation I discover that no user files have been created either. I attempted a system restore, but discovered that all my past restore points were gone, and intruigingly, the computer had stopped createing 24 hour checkpoints. I cannot say for definite whether it was this issue or another one that caused system restore to mess up, as I don't check my system restore all that often. Either way, system restore is not an option. There have been mentions of a full Vista reinstall, though if at all possible I would like to avoid this.
View 9 Replies
View Related
Apr 30, 2010
I am having problems with creating shortcuts on my desktop. when i select send to desktop (create shortcut) it comes up with the error. Windows could create the shortcut. Check to see if the disc is full.I have over 180 GB free space left. To get things to the desktop i can drag it into the tab section next to the start icon, and then drag onto desktop.But when i do this i am always required to give permission and it creates two desktop icons.i have been having problems with my catalyst control centre but i dont think they are related.
View 9 Replies
View Related
Mar 5, 2009
When I install Vista, it wants to force me to create a local account, and it won't let me create one called Administrator, becuase the name is already used (thus the Administrator account exists). I don't want to create some dummy account just just to log in to join the domain. How do I get past the "Choose a user name and picture" screen and log in as Administrator so I can just install the network drivers and join my domain?
View 4 Replies
View Related
Jun 7, 2009
I was trying to give myself permission to the file C:UsersTomLocal Settings. Now, no matter what I hit I keep getting the attached error messages and there is no exit. Nothing happens when I hit edit, so I can't change anything back. Nothing happens when I hit cancel. So, my only option is to hit ok, but this gives me the attached error messages.
Should I use task manager to end the task? What are the dangers of "an inconsistent state" as displayed in the last error screen? Is there a utility I can use to set the ownership and permissions back to there original status?
View 3 Replies
View Related
Mar 26, 2009
My laptop, Toshiba model M305D, has been down about 6 days. I went to microsoft technical, put in a request but got no reply. This is the first problem I've had since buying the laptop new August, 2008. It has an AMD 64 bit processor and runs Vista home premium 64 bit. It has been kept up-to-date with windows update.
THE PROBLEM: The last time it was receiving updates it became stuck in a loop. It was processing update stage 3 of 3 at the 96% complete point when it restarted the computer to complete installation. Only, it keeps restarting and going through this update install process. It does this over and over.
I used the F8 on startup method to get to a help screen hoping to get into the safe mode. I got to the help screen.
The computer will not go into the "safe mode" using any of the choices presented on this screen, but instead goes right back to update screens described above when one of the choices is selected. I had hoped to get access to restore but could not.
How can I get past this to get back up and running?
View 5 Replies
View Related
May 8, 2008
I have already posted to the "Help" boards Toshiba sends their customers to for
assistance, but feel there will more than likely be a faster reply (let alone a reply period) related directly to my need. Here is the situation: Am writing concerning my Toshiba laptop, Satellite A135-S4527, currently running with Vista Home Premium. Have had previous short bouts with blue screen errors, but could always find the fix quickly and get back to normal. Not this time, can't even get to Windows for any length of time beyond (literally) seconds before it repeats the cycle of "Did not shut down correctly ... choose a mode" ad infinitum like some horrible computer version of "Groundhog's Day."
I was in the midst of finishing the installation of the latest Vista update, and had also been installing "Alcohol 120" when the blue screen appeared with the following message [thank heavens for digital cameras since this flashes and is gone in a flash]: "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:........
View 5 Replies
View Related
Jul 24, 2009
I have Vista Ultimate 64 installed in my pc with SP2. I never had any problem with automatic updates until recently where after i installed the updates the pc entered an infinite rewstar loop after trying to install update 3 of 3. I googled it and saw that this problem came on surface on february and after installing a certain update first u were ok but i already have this update through SP2...
View 6 Replies
View Related
Sep 10, 2009
I'm running Vista HP with SP2. The update package from 9/8 keeps hanging on the "Stage 3" part. It is in a loop where it is in the configuring updates mode for a while, then does a restart. Next time through, the same thing. It has cycled through this at least 10 times without finishing the updates.
View 4 Replies
View Related
Aug 4, 2008
I purchased a new machine and It seems to run through OK and then decides to do what I call a 'boot loop'. It goes through the 'normal' Dos-like screens, does a blue-screen 'chkdsk' thingy (says that windows was shut-down incorrectly - which it wasn't) and then asks if I want to start in one of the tasty flavours of 'safe mode'. Now, I've been to safe-mode, being the submissive I can be, but that accomplishes nothing, except the grace of a computer stuck in the Middle Ages. Anyway, I decide to start Windows as 'normal' and it goes on this 'boot loop'. The good news is that it usually (90%+) makes it to the desktop and the system sings sweetly thereafter. My concern is that there is a little gremlin stuck somewhere in my system and I want to find a way to exorcise the beast. Note: I can provide more specific 'screen' data if needed, i.e. taking a photo of the offending screens.
View 9 Replies
View Related
Oct 19, 2008
Had an incomplete install of a program...computer otherwise working fine...did a system restore to try to go back to preinstall...in the system restore shutdown and restart, now hung up in a update configuation loop that is in third step up to 99% that shuts down only to do the same thing over and over again. So my system never gets to the mainscreen acknowledging system was restored.
I tried F8 going to safe mode, but configuation step 3 takes over again, goes to 99% and shuts down to restart.
I tried the vista 64 sp1 disc...cannot acccess another restore point since it says the system is already in restore mode....just never gets there with the endless 3rd step update configuration loop.
The disc also does not offer the repair/update mode as an option...only full install.
I do have norton ghost 14 on the system...so there is a complete backup file on another internal drive...but no way to get to it to initiate a recovery ...
View 5 Replies
View Related
Apr 9, 2010
Ok, just installed Vista service pack 2 and now I'm in a loop when booting, there is a flash of a blue screen but cant read it
note that I can not boot into any mode! I do have a repair disk and tried the startup repair to no avail!
I'm wondering is there a way to stop automatic rebooting when an error in command prompt in the recovery disk.
i really need this fixed i do have another computer that i can use to help fix. There has to be a way.
I have tried to uninstall service pack 2 via command prompt but since i used cc cleaner its not in the temp file!
View 9 Replies
View Related
Aug 9, 2008
I believe I have a (Vista Ultimate x64 RC-1? Already has SP1) cd. I can install it fine. I can then install the correct drivers for my hardware. And all works well, until... I use windows updates and select the 'important' only updates. After that, I'm stuck in a boot-loop. And by boot-loop, I mean I can't get into windows OR safe-mode. I have done this 2 times so far. It definitely only happens when I run the updates (can work perfectly fine for days w/o the updates).It's like I'm just now allowed to have an updated version of Vista. I made a restore point prior to the updates, so I can get back to where I was, but I obviously can't run an outdated OS all the time.
View 9 Replies
View Related
May 2, 2009
I have Windows Vista Basic and have been trying to use an OEM anytime-upgrade to Premium edition. I did the online check and found my PC was compatable. Every time I try to upgrade, everything goes well until the very end. At that point my PC goes into a reset loop. It resets, a blue screen states that netio.sys has some sort of problem (but is too quick for me to note any of it down - useful!), then I get the option of loading MS Vista or go back to the original version. IF I chose Vista the PC eventually resets and I start this little game again!
The only info I have managed to note down from the blue screen is: nsiproxy.sys or netio.sys and something about the memory dump (which I can't access - I have tried!) Stop 0x0000BE (some leters and numbers in brackets, this is up for seconds so can't note down!) I've tried to stop the PC resetting via the control panel. Once in the reset loop I can't do anything except Rollback to the original settings. If I try to go to safe mode I'm told I need to reset so as windows can complete the installation.
View 9 Replies
View Related
Feb 7, 2009
i installed sp2 several times. First time it worked fine until we had a power outage and it unregistered my windows installation and cited security breach as the reason why it could not rereg the os. so I reinstalled the OS. after about a week i installed sp2 and again it worked fine for about 3 days Then it unregistered the os again. This time i uninstalled the SP and all was fine. went to reinstall the sp and it would make it to the 100% mark and back out the whole installation.
AFter reading forums til my eyeballs bled i found i could "rearm" the system. I did this and SP2 reinstalled fine. The next day updates told me i had 1 important update and it was a sp2 uninstallation tool. I clicked ok and d/l it when the system rebooted it promptly removed sp2. I reinstalled sp2 it reinstalled fine. The next day new definitions for defender came in and when it rebooted it removed sp2 again>??? Any ideas this round robin installation system seems to be stuck in a loop and im stuck with something just not sure what.
View 7 Replies
View Related
Mar 26, 2008
When I start windows home premium on a new pc for the first time should i get an option to choose the installation language? I bought a pc in germany and the start up failed i got an error message in an endless loop i got it to start with the recovery disc but that has set it to German and i cant change it.
View 4 Replies
View Related
Mar 23, 2008
I have used programs from MSDOS to Vista and by far Vista is the worst program of the lot. Maybe I am doing something wrong. Without exception, everytime I attempt to open a window, it takes for ever for the progress bar at the bottom to fillup and more often than not, I have to give up and start over. It is like it is stuck in a perpetual loop and just can't finish the requested task. I am paying for a cable modem and getting dial up results with Vista. This is fleecing of America. I recently had to purchase a new laptop and of course it had Vista. If the service pack does ever come and does not fix the issues with this crappy program, I would be in favor of filing a class action suit for Microsoft to either fix the issues or replace the program with XP which was great.
View 9 Replies
View Related
Jul 5, 2008
I have the following issue and hope that somebody can give me a hint about what might be going on! My system has two raid 1 arrays - one is running on XP Professional SP3 the other one is running on Vista x64 Ultimate SP1. When I start my virtual machines (either from the Virtual PC console or when double-clicking the *.vmc files) than everything is working fine on XP and the virtual machines are booting and running as expected. However, on Vista the following is happening (and I hope somebody has an idea):
1. Starting the Virtual machines from the console leads to an immediate reboot of my host machine (I can't even see any boot screen of the virtual machine - it is like clicking start in the VPC console -- > reboot of host).
Now I tried the following:.........
View 9 Replies
View Related
Apr 14, 2008
so im not a computer expert and I just got my computer a few months ago. Recently I donloaded Skype 3.6, but i never knew it wasn't for Vista, so it messed my computer up. I deleted it, but now my right click dosnt work, only my touchpad and my computer it 100x slower. Someone told me i should just reboot my computer, but no matter what i try it dosnt reboot, any idea's on how to reboot??
View 4 Replies
View Related
May 3, 2008
I have had this issue for many months, now. I loaded Vista x64 Home Premium to run in a dual-boot configuration with my XP Pro. I do critical work so I didn't trust going to Vista exclusively. I mainly wanted it to see if I could utilize all my RAM and speed up Photoshop processing. I have had it working three or four times, (except for tablet functionality) then when I must re-boot because of SP1 and other security updates or in one case, I installed Office 2007, it does nothing on restart; black screens and just sits there, totally unresponsive.
No blinking of the LED which shows drive activity. When re-booting, F8 isn't working (nothing happens). Regarding the previous instances, I gave up trying to get it to respond and went back to booting into XP, which always works fine. Then after a period (usually a month or more) I will try booting into Vista, on restart, and viola, it works again! WTF is going on?
View 8 Replies
View Related
Oct 16, 2008
Occasionally when I've been away from the computer for a short time and it goes into sleep mode (it`s set for 15 minutes), I can't bring up the display simply by hitting a key. I have to shut it down and restart. The boot button on the console will still be lit and I have to shut it down before I reboot. This probably happens about 30% of the time. The other 70% it comes back up with a key touch.
View 6 Replies
View Related
Jun 21, 2008
I used to have Windows XP on this PC and I have recently replaced it with a clean install of Windows Vista Ultimate 32 bit. Since then my computer will no longer reboot. When I click start > restart it will shut down like it should, then it will go to the POST screen and from there it goes black and nothing happens (where it would normally load windows). I have taken out my C: drive and put it in another PC and it worked perfectly. I have a C and D drive which are both 2 separate hard disks and always worked fine in XP. How can I fix this? They are both IDE. I have to now power off the PC and power it on again to restart.
View 4 Replies
View Related
Nov 21, 2008
Some times after I reboot vista (ultimate 64bit), random folders in C drive are deleted.
I already lost 4 games and 2 apps (~40 GB).
I think it's happening only after restart and only on C drive, but it's really hard to watch all (4) drives.
View 9 Replies
View Related
Oct 7, 2009
Every now and then I have a problem where Vista displays the message "USB device not recognized" when I plug my iPhone on the USB port. It happens with all the USB ports on the machine and rebooting the computer will fix the problem.
Does anyone has a suggestion as to what may cause the problem and how to fix it?
It there a service that I could try to restart instead of restarting the whole computer?
View 9 Replies
View Related
Mar 23, 2008
My computer freezes and reboots when I surf the web. I use Firefox, Internet Explorer just doesn't cut it for me. My Windows is fully up to date. It also happens when I use Azureus.
View 9 Replies
View Related
