Stuck Reboot Loop

Feb 23, 2009

I was trying to get my sister's computer running. It is the worst case I have ever seen. It was giving me pop-ups trying to open control panel. It will not let me run Spybot, Malwarbytes anti malware. Folder options are gone from control panel, among other things. I tried a to run these programs. Went into safe mode.....would not let me run them there. I downloaded CCleaner in safe mode and ran the cleaner.(not registry cleaner) Now it's stuck in a reboot loop. What can I do to get it back to at least booting? Never seen this before. This is XP media center edition When I first got there it was popping up "my documents" from a user who didn't even use the computer about every 5 minutes.

View 4 Replies


ADVERTISEMENT

Sysprep Create Reboot Loop

Feb 6, 2009

I have created a Vista Enterprise x86 image several times and tried tosysprep it. I used the 'sysprep /oobe /generalize' command. When thecomputer boots after I have syspreped it I get a black screen that says'Setting up your computer' or somthing similar. It then displays thevista background and says 'Please wait while Windows continues settingup your computer'. The machine then reboots and the green loading bar shows for a second and reboots. The machine is then stuck in a reboot loop. Not even safe mode or Last known good config will let the machineboot.lso I had several days of pain trying to get the vista to sysprep at all. My vLite SP! slipstreamed disc didn't allow syspreping and erroredout. I had to install vista and manually install the SP1.

View 9 Replies View Related

CRCDisk.sys: Boot Up Reboot Loop

Mar 23, 2008

I dont know which of the folliwing the problem is. I am running Vista 64Bit OS with Corsair memory at 4GB - all works well. But regardless of the memory, when I install an additional two modules to upgrade the computer to 8GB - Vista goes into the gut wrenching boot up reboot loop. When I go into safe mode, the last driver Vista attempts to load is the crcdisk.sys. But as I have read in the forums, this is the last driver loaded so it does not neccesarily mean that this driver is the problem.

View 7 Replies View Related

Stuck In A Loop After Updates, Can't Get Into Windows OR Safe-mode

Aug 9, 2008

I believe I have a (Vista Ultimate x64 RC-1? Already has SP1) cd. I can install it fine. I can then install the correct drivers for my hardware. And all works well, until... I use windows updates and select the 'important' only updates. After that, I'm stuck in a boot-loop. And by boot-loop, I mean I can't get into windows OR safe-mode. I have done this 2 times so far. It definitely only happens when I run the updates (can work perfectly fine for days w/o the updates).It's like I'm just now allowed to have an updated version of Vista. I made a restore point prior to the updates, so I can get back to where I was, but I obviously can't run an outdated OS all the time.

View 9 Replies View Related

System Rebooted It Promptly Removed Sp2, Stuck In Loop

Feb 7, 2009

i installed sp2 several times. First time it worked fine until we had a power outage and it unregistered my windows installation and cited security breach as the reason why it could not rereg the os. so I reinstalled the OS. after about a week i installed sp2 and again it worked fine for about 3 days Then it unregistered the os again. This time i uninstalled the SP and all was fine. went to reinstall the sp and it would make it to the 100% mark and back out the whole installation.

AFter reading forums til my eyeballs bled i found i could "rearm" the system. I did this and SP2 reinstalled fine. The next day updates told me i had 1 important update and it was a sp2 uninstallation tool. I clicked ok and d/l it when the system rebooted it promptly removed sp2. I reinstalled sp2 it reinstalled fine. The next day new definitions for defender came in and when it rebooted it removed sp2 again>??? Any ideas this round robin installation system seems to be stuck in a loop and im stuck with something just not sure what.

View 7 Replies View Related

Open Windows: It Is Stuck In A Perpetual Loop And Just Can't Finish The Requested Task

Mar 23, 2008

I have used programs from MSDOS to Vista and by far Vista is the worst program of the lot. Maybe I am doing something wrong. Without exception, everytime I attempt to open a window, it takes for ever for the progress bar at the bottom to fillup and more often than not, I have to give up and start over. It is like it is stuck in a perpetual loop and just can't finish the requested task. I am paying for a cable modem and getting dial up results with Vista. This is fleecing of America. I recently had to purchase a new laptop and of course it had Vista. If the service pack does ever come and does not fix the issues with this crappy program, I would be in favor of filing a class action suit for Microsoft to either fix the issues or replace the program with XP which was great.

View 9 Replies View Related

Computer Stuck In Endless Shutdown/reboot

Mar 27, 2010

Here 3 days ago i was playing a game on my computer and suddenly it just shut off. when i try to start it again the fan is just running for 4 sec then it shuts down and reboots again. This loop will go on forever and it never starts. The only way of getting it to stop is cutting the power totally. I laid my computer to rest for a day and i tried starting again.

it runned perfectly for about 1 hour, then whitout any warning at all it just shuts off again, Just like if someone cutted the power. I have not been able to start it since. I have tried to plug out the harddisk too see if something on that might have caused the problem, but same thing happens, Keeps rebooting every 4th second.

View 7 Replies View Related

Loop Trying To Grant For Permission

Jun 7, 2009

I was trying to give myself permission to the file C:UsersTomLocal Settings. Now, no matter what I hit I keep getting the attached error messages and there is no exit. Nothing happens when I hit edit, so I can't change anything back. Nothing happens when I hit cancel. So, my only option is to hit ok, but this gives me the attached error messages.

Should I use task manager to end the task? What are the dangers of "an inconsistent state" as displayed in the last error screen? Is there a utility I can use to set the ownership and permissions back to there original status?

View 3 Replies View Related

Vista X64 Update Loop At Startup

Mar 26, 2009

My laptop, Toshiba model M305D, has been down about 6 days. I went to microsoft technical, put in a request but got no reply. This is the first problem I've had since buying the laptop new August, 2008. It has an AMD 64 bit processor and runs Vista home premium 64 bit. It has been kept up-to-date with windows update.

THE PROBLEM: The last time it was receiving updates it became stuck in a loop. It was processing update stage 3 of 3 at the 96% complete point when it restarted the computer to complete installation. Only, it keeps restarting and going through this update install process. It does this over and over.

I used the F8 on startup method to get to a help screen hoping to get into the safe mode. I got to the help screen.

The computer will not go into the "safe mode" using any of the choices presented on this screen, but instead goes right back to update screens described above when one of the choices is selected. I had hoped to get access to restore but could not.

How can I get past this to get back up and running?

View 5 Replies View Related

Blue Screen In Continuous Loop

May 8, 2008

I have already posted to the "Help" boards Toshiba sends their customers to for
assistance, but feel there will more than likely be a faster reply (let alone a reply period) related directly to my need. Here is the situation: Am writing concerning my Toshiba laptop, Satellite A135-S4527, currently running with Vista Home Premium. Have had previous short bouts with blue screen errors, but could always find the fix quickly and get back to normal. Not this time, can't even get to Windows for any length of time beyond (literally) seconds before it repeats the cycle of "Did not shut down correctly ... choose a mode" ad infinitum like some horrible computer version of "Groundhog's Day."

I was in the midst of finishing the installation of the latest Vista update, and had also been installing "Alcohol 120" when the blue screen appeared with the following message [thank heavens for digital cameras since this flashes and is gone in a flash]: "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:........

View 5 Replies View Related

Restart Loop Install Updates

Jul 24, 2009

I have Vista Ultimate 64 installed in my pc with SP2. I never had any problem with automatic updates until recently where after i installed the updates the pc entered an infinite rewstar loop after trying to install update 3 of 3. I googled it and saw that this problem came on surface on february and after installing a certain update first u were ok but i already have this update through SP2...

View 6 Replies View Related

Update Installation Hung Up In Loop

Sep 10, 2009

I'm running Vista HP with SP2. The update package from 9/8 keeps hanging on the "Stage 3" part. It is in a loop where it is in the configuring updates mode for a while, then does a restart. Next time through, the same thing. It has cycled through this at least 10 times without finishing the updates.

View 4 Replies View Related

Boot Loop : Blue Screen

Aug 4, 2008

I purchased a new machine and It seems to run through OK and then decides to do what I call a 'boot loop'. It goes through the 'normal' Dos-like screens, does a blue-screen 'chkdsk' thingy (says that windows was shut-down incorrectly - which it wasn't) and then asks if I want to start in one of the tasty flavours of 'safe mode'. Now, I've been to safe-mode, being the submissive I can be, but that accomplishes nothing, except the grace of a computer stuck in the Middle Ages. Anyway, I decide to start Windows as 'normal' and it goes on this 'boot loop'. The good news is that it usually (90%+) makes it to the desktop and the system sings sweetly thereafter. My concern is that there is a little gremlin stuck somewhere in my system and I want to find a way to exorcise the beast. Note: I can provide more specific 'screen' data if needed, i.e. taking a photo of the offending screens.

View 9 Replies View Related

System Restore Update Configuration Loop

Oct 19, 2008

Had an incomplete install of a program...computer otherwise working fine...did a system restore to try to go back to preinstall...in the system restore shutdown and restart, now hung up in a update configuation loop that is in third step up to 99% that shuts down only to do the same thing over and over again. So my system never gets to the mainscreen acknowledging system was restored.

I tried F8 going to safe mode, but configuation step 3 takes over again, goes to 99% and shuts down to restart.

I tried the vista 64 sp1 disc...cannot acccess another restore point since it says the system is already in restore mode....just never gets there with the endless 3rd step update configuration loop.

The disc also does not offer the repair/update mode as an option...only full install.

I do have norton ghost 14 on the system...so there is a complete backup file on another internal drive...but no way to get to it to initiate a recovery ...

View 5 Replies View Related

Windows In Loop With Blue Screen Flash

Apr 9, 2010

Ok, just installed Vista service pack 2 and now I'm in a loop when booting, there is a flash of a blue screen but cant read it

note that I can not boot into any mode! I do have a repair disk and tried the startup repair to no avail!

I'm wondering is there a way to stop automatic rebooting when an error in command prompt in the recovery disk.

i really need this fixed i do have another computer that i can use to help fix. There has to be a way.

I have tried to uninstall service pack 2 via command prompt but since i used cc cleaner its not in the temp file!

View 9 Replies View Related

Upgrade, Reset Loop, Rollback To The Original Settings

May 2, 2009

I have Windows Vista Basic and have been trying to use an OEM anytime-upgrade to Premium edition. I did the online check and found my PC was compatable. Every time I try to upgrade, everything goes well until the very end. At that point my PC goes into a reset loop. It resets, a blue screen states that netio.sys has some sort of problem (but is too quick for me to note any of it down - useful!), then I get the option of loading MS Vista or go back to the original version. IF I chose Vista the PC eventually resets and I start this little game again!

The only info I have managed to note down from the blue screen is: nsiproxy.sys or netio.sys and something about the memory dump (which I can't access - I have tried!) Stop 0x0000BE (some leters and numbers in brackets, this is up for seconds so can't note down!) I've tried to stop the PC resetting via the control panel. Once in the reset loop I can't do anything except Rollback to the original settings. If I try to go to safe mode I'm told I need to reset so as windows can complete the installation.

View 9 Replies View Related

Start Up Failed, Got An Error Message Endless Loop

Mar 26, 2008

When I start windows home premium on a new pc for the first time should i get an option to choose the installation language? I bought a pc in germany and the start up failed i got an error message in an endless loop i got it to start with the recovery disc but that has set it to German and i cant change it.

View 4 Replies View Related

Starting The Virtual Machines From The Console Leads To An Immediate Reboot Of My Host Machine (I Can't Even See Any Boot Screen Of The Virtual Machine - It Is Like Clicking Start In The VPC Console -- > Reboot Of Host)

Jul 5, 2008

I have the following issue and hope that somebody can give me a hint about what might be going on! My system has two raid 1 arrays - one is running on XP Professional SP3 the other one is running on Vista x64 Ultimate SP1. When I start my virtual machines (either from the Virtual PC console or when double-clicking the *.vmc files) than everything is working fine on XP and the virtual machines are booting and running as expected. However, on Vista the following is happening (and I hope somebody has an idea):

1. Starting the Virtual machines from the console leads to an immediate reboot of my host machine (I can't even see any boot screen of the virtual machine - it is like clicking start in the VPC console -- > reboot of host).

Now I tried the following:.........

View 9 Replies View Related

Stuck Going Up Down Log Off

Nov 29, 2008

What is the truth about aol? I've had it for 5 years and I'm used to the homepage. Favorites all the features seem great. However I'll surf it and go to my regular places and some times my hour glass gets stuck going up and down, causing me to log off. It's free and I'm wondering is it sucking up my resorces? Would it be better to deep six it and stay with internet explore? What pro's and mostly cons do you folks know about aol?

View 4 Replies View Related

Does't Reboot

Apr 14, 2008

so im not a computer expert and I just got my computer a few months ago. Recently I donloaded Skype 3.6, but i never knew it wasn't for Vista, so it messed my computer up. I deleted it, but now my right click dosnt work, only my touchpad and my computer it 100x slower. Someone told me i should just reboot my computer, but no matter what i try it dosnt reboot, any idea's on how to reboot??

View 4 Replies View Related

New Here And Already Stuck With Ultimate X64

Sep 1, 2008

Since my system picked up a "virus". I booted back up in safe mode and deleted all the files manually and used a program called "your uninstaller" to clean up the registry as windows uninstaller kept getting stuck on a .dll file.

ok this is what i've done so far:

1) updating the driver (no update available)
2) uninstall the driver and reboot.
3) pull my hair out

It just won't play dvd's or let me see any data on them, they appear blank even though i know they arent (after checking them on another machine). But it will play cd's fine.

View 9 Replies View Related

No Permission, Is Stuck!

Feb 7, 2010

Last night I was trying to get rid of some of the virtual memory on my laptop.

It has 320 Gb and 260 Gb are occupied so since I only have 80 Gb on the HD, I was trying to fix the problem.Well instead to fix the problem I made a mess somehow I changed the users and Admin' options, and I changed all the permissions to the accounts two accounts!! I was trying to get control of the system like a TrustedInstaller.instead.the laptop works but I have no access to anything!

Right now I basically have no permission only reading NO ACCESS to the hard disk ...no access to most of the systems' folders .

In prompt I can not really do anything since it denies every my request.

View 9 Replies View Related

Ad-Aware Gets Stuck

Sep 22, 2009

I have a problem with my computer, and it won't let me run Ad-Aware. I already ran the system check to see it isn't a hardware problem. I have deleted all temp files, ran virus scans, etc., but the problem hasn't gone away. What's happening is that the computer is slowing down. If I click from one screen to another, some of its graphics will remain for a couple seconds (these seemed like indications to me of a bad processor, but apparently that's not the case.)

I know when I don't run Ad-Aware to remove multiple spyware software for a while, my computer slows down. But everytime I run Ad-Aware, it gets stuck (and not always on the same file.) I have already tried reinstalling Ad-Aware, but the problem remains.

View 9 Replies View Related

LCD Stuck Pixels

Feb 10, 2009

I just bought a brand new computer couple of weeks ago and today I noticed two stuck pixels on my brand new Samsung 2232GW screen!!!

I know that in order to return it, it has to have 7 stuck pixels, so I gues I'm stuck with it....

The problem is that I tried massaging them, tapping and even hitting and shaking to no avail.I tried the softwares like UndeaPixels and JScreenfix but they don't work, I still have two stuck pixels in the center of my beautiful 22'' one blue and one red!

View 9 Replies View Related

Builder Stuck

Apr 10, 2009

Every peice of hardware is brand new and there is nothing saved in my hard drive right now.

I am doing a clean install of windows 64 home premium edition, basically when i get to the screen that asks me where i want to install windows...there is no drive for me to choose. My Hard drive is SATA and it is detected in BIOS in the IDE channel 0 Master slot. I have tried other SATA cables and I have tried other SATA slots. I have tried AHCI option in BIOS. I have tried runnin in Native Mode as well as Legacy IDE mode.

I got my drivers from GIGABYTE - Upgrade Your Life

I click the correct model number and at the next page on the bottom it asks for the type of OS you have...I select windows 64 obviously. I then save the drivers to my USB drive. I extract the files and switch my USB drive over to the new comp. when i get to the screen that asks me where i want to install windows, there is an option to load drivers. However, once i load the drivers the only way they can be selected is if I un-check the box "HIDE DRIVERS THAT ARE NOT COMPATIBLE WITH HARDWARE ON THIS COMPUTER." Now, one would think that i have incompatible drivers...but i'm getting them directly from the mobo website.

View 9 Replies View Related

Number 1 Key Is Stuck

Sep 7, 2009

i have recently bought a Toshiba L500 (Australian model) and played for awhile and have realised the number 1 keys is hard to push, so when i press it down mutiple 11111111111111111111 appear and becomes stuck and when i un-jig it, it stops and pushing down is harder than the surrounding numeric numbers so it definitely indicates something is wrong. (top row of numbers) can it be fixed at a service center or go back and get a new 1, or are there other options?

View 5 Replies View Related

Harddrive Stuck Up

May 11, 2009

I was about to order a new harddrive since mine has failed. But then I decided to look inside one more time, and found that there are two harddrives in there. I never used he second one at all even though it was always there (i figured it was just one harddrive split in two and never needed the extra space). So I decided to switch the harddrive cords since one was hard to get to and because I have no idea which is the one I was using and which one I never used. I used my recovery disks on it and it seemed like everything was going fine. Then to test it, I shut down the computer then turned it back on 5 minutes later. Then I got stuck on the black screen with blinking "_", and eventually it says failed to boot disk please insert system disk.

so my questions are:
*Did switching the cords make the secondary harddrive the main one,
*Does this mean both harddrives have failed?
*Are my system files corrupt?

View 7 Replies View Related

E-mails Stuck In Out Box

Apr 21, 2008

I have been having this problem all day.There are two messages stuck in my outbox messages and they out box are no being displayed. I keep getting a message saying message could not be displayed windows mail encountered an unexpected problem check your computer for low memory or low disk space and try again.Is that the problem how do I check.

View 4 Replies View Related

Can't Reinstall/fix Stuck

Aug 27, 2009

I turn it on and get a message saying to insert the DVD to fix a system registry error. ( I don't remember what message it was sorry) So I do and windows boots. I backed up my files that night. Next day windows is acting weird and sluggish, if I try to open my computer or documents PC freezes, it takes a long time to boot and 8 times out of ten will hang on the green loading bar or take an hour to load, my sound card deleted itself as did my cdrom drive. Safe mode either takes forever to boot or will freeze when loading drivers, I tried to re store/reinstall and boot from the vista DVD at startup but i get the message "The file is possibly corrupt. The file header check sum does not match the computed check sum" or "couldn't find boot manager". This happens for the x64 vista disk, x32 disk and my XP pro disk. I tried to reformat in safe mode command prompt and it said Formatting the partition was prohibited. I thought it was my ram at first so bought new ram but still the same problem. I'm also not sure what caused this I do regular virus checks with up to date software, maybe its a bad windows update?

View 4 Replies View Related

Msnbc Stuck

Mar 29, 2010

it will not update..i keep seeing keith oberman talk about don pardo and brian williams talk about floods and dick cheney's heart.

View 4 Replies View Related

Static IP Stuck

May 14, 2008

So basically, I have a Sony Vaio with Windows Vista 32 bits. We send it off to my fathers company to get an anti-virus installed. When they gave it back, I tried to get wired internet but nothing. So I checked the LAN configuration and the static ip and DNS of the company had been left there (when before it was configured to be used with DHCP as I use at home). So I tried to change it by putting Get IP address automatically, nothing complicated. I restarted the computer, but the static IP stayed, as if it was stuck. Tried the same 3 times and nothing. I am the Admin of my computer, but it seems that the OS or something won't let me change the IP address.

I went to talk the technicians in the company but they couldn't resolve it. I'm kind of getting mad about this subject, I just want to use the internet in my laptop. After trying everything (even reseting the IP through cmd.exe, which worked because the static IP was erased, yet when viewing properties, the static IP option is still selected but with no specific IP address in the boxes) I can only think of uninstalling and reinstalling the network controller. I am just afraid that the driver is not embeded within the disk (because when I bought the computer, no drivers were given to me). Before doing anything rash and messing the computer even further,

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved