Microsoft Update Crashed OP Sys
Jul 29, 2009
I don't know if anyone else had a problem with the latest update from the wonderful people at Microsoft but I sure did. The system suddenly went into a loop trying to install the latest update then shut down at installing step 3 of 3 at 0%. Well I tried everything and then finally did a reinstall and NOT formatting the drive as to keep the windows.old files. Everything worked great and then the install happened again but this time it took with no problem. It may have been that at the same time cyberlink was having issues with playing a blue ray but I am not sure. I just thought I might mention the solution in case anyone else had the problem. Now everything is nearly back up and no problems so far.
View 4 Replies
ADVERTISEMENT
Mar 7, 2009
I am running Office Home and Student 2007 and have just run a diagnostic which suggests that my installation is not up to date and that I go to the Microsoft Update site and download any available updates. When I do, I am asked to sign on with 'Microsoft Update'. The idea is, I think, to combine this Microsoft Update with my Windows Update and let Office updates come though along with updates for Vista, IE, etc. I have posted here before with issues concerning updates including a fiasco I had last November which involved Office updates and am wondering, since Office seems to be working well at the moment (I was bored so I did a diagnostic ) should I bother with this or just leave it? Does Office have security issues like IE and Vista?
View 4 Replies
View Related
Jul 29, 2009
I have a gateway MT3422 that I have had for 2 years and it came with vista. I have had to restore my computer once since I have had it and never had any serious problems with it. 3 months ago, my computer was trying to install SP1 and when the computer restarts, it goes to a blue screen, then into a black screen and it says "error, calling phyllat. can not find operating system" and it locks up. I push ALT+CTRL+DEL to reset it and it reboots and says the upgrade did not install and gives me the option to reinstall it. After 3 months of trying, I gave up and ignored my computer to download and install the service pack.
Then one day, it actually installed SP1 and when it restarted, it said "error, do you wish to launch system restore (recommended)" I did and it went to a black screen for 4 hours - no cpu or aything running or eve the blue cpu light to show its running. No fan on, no noise from the processor. I shut my computer off and it doesnt ever go to the windows vista loading screen.
Ive tried to boot in safe mode and it gets hung up on system/windows32.....drv and never goes any further and gets caught in a loop. I pushed f8 to launch the repair mode, and it gets caught in a loop. I put i my restore disc that came with my laptop and when I ask it to install windows vista, it gets caught in a loop. tried to do a system restore and it cant because my C drive is corrupted.
View 7 Replies
View Related
Nov 9, 2008
i am running vista home premium that came installed on my toshiba.
it was running a tad strangly but still running (not noticing the the computer name had been changed and various other items)..
then i was doing a normal update of adobe pdf reader and the install crashed. after that the microsoft installer wont work, i cant boot my computer normally altho it does open in safe mode - however, the windows installer wont work - even in safe mode.
when i try to boot it normally it seems to start fine but hangs once the desktop appears.....
i have tried repairing the startup process via the vista repair disc.
i have tried restoring back to a previous restore point
nothing so far has worked.
after doing the above i cant even start my computer normally (altho i can boot in safe) it seems to begin the process then the screen just goes black altho the disk light is still on....
i am now just about to reinstall my entire system but i would rather not have to do this....
is there anything else i can try? i have a time sensitive deadline that needs to be reached (of course) so i cant play around with this for too long.
View 3 Replies
View Related
Nov 10, 2008
I have a problem with starting Lineage 2 Interlude on Windows Vista Business x64. After Windows install, and after updates, i installed the Lineage 2 Interlude client and worked at well. BUT after Directx update the client crashed, with this error message.
After this message, the client is started but i can't log in. (Access failed...)
Three reason what may be the source of errors:
- DirectX (redistributable, the newest)
- .Net Framework (2.0 or/and 3.0)
- Visual C++ 2005/2008 Redistributable package x64 (once with 2008 x64 package the client is worked, after Windows restart the problem is was the same).
View 5 Replies
View Related
May 6, 2007
Microsoft Update was first released a few years ago for Windows XP and Server 2003 as a great way to update all of your Microsoft software installed on your PC. Not only would it update Windows, but it would also update Microsoft Office. Are you a Microsoft Outlook user? If so, Microsoft Update would even download updated junk mail signatures when they are released.
In Windows Vista the new Windows Update application is no longer web-based. Microsoft has built-in the old Microsoft Update functionality into the new interface but you need to turn it on before you can use it. Follow these steps to turn on updates for other Microsoft applications: ...
View 0 Replies
View Related
Dec 18, 2008
A couple of days I did a stupid thing. Thinking it would free some diskspace I deleted "WindowsSoftwareDistribution" folder after rebooting I noticed that Windows update is not using Microsoft update service anymore, instead it reverted to Windows update service.
I clicked on the "Get updates for more software" link button, I was directed into Microsoft update website. unfortunately right after the "Review the license agreement" page I got the 0x80070002 error on Microsoft update, so I tried going to Windows update instead on IE but I also got an error there. When I tried checking for updates on My computer it worked like a charm (only Windows update not Microsoft update).
So I googled the error (since Microsoft website was no help at all) I found a couple of solutions Deleting the content of "WindowsSoftwareDistributionDataStore" then starting Windows update. And that was no help at all. I reverted the content of the folder "WindowsSoftwareDistribution" as it was before I started missing with it. And that was no help at all..............
View 5 Replies
View Related
Mar 9, 2009
I had issues last November with what I suspected was a problem with updates for Office 2007 from Microsoft Update. After a Factory Image reinstall and reloading all my software, everything was humming along nicely. Then I discovered that my Office wasn't up to date and went over to MS update to pick up the security updates. I got 20 updates including SP1 for Office.
I have been installing them a few at a time and the last batch included a security update for OneNote 2007 KB950130 and tw security updates for Office KB951944 and KB954326. When I went to restart, the SAME THING HAPPENED AS IN NOVEMBER. Exactly.
The computer rebooted fine till it got to the point where I sign in and then somewhere in between the welcome screen and the desktop loading, it froze solid. The little tone that sounds when the desktop loads went into a stutter and then slowly faded.............
View 8 Replies
View Related
Sep 30, 2009
Just ahead of the launch of Windows 7 comes Microsoft Security Essentials, their new free anti-virus package based on their award-winning ForeFront corporate security scanning engine. I wrote last night that this software is being released today and there was an interesting comment from Yatti420 who wrote. MS should just push MSE to all users.. I notice lots of clients comps coming in now with stuff AVG misses.. MSE is a Microsoft Product that just works well.. Link - Should Microsoft push MSE through Windows Update? | Windows 7 News
View 6 Replies
View Related
Oct 10, 2008
Dear Microsoft Customer, Please notice that Microsoft company has recently issued a Security Update for OS Microsoft Windows. The update applies to the following OS versions: Microsoft Windows 98, Microsoft Windows 2000, Microsoft Windows Millenium, Microsoft Windows XP, Microsoft Windows Vista. Please notice, that present update applies to high-priority updates category. In order to help protect your computer against security threats and performance problems, we strongly recommend you to install this update..................
View 9 Replies
View Related
Jul 17, 2009
This security update (see below) kept reappearing on my task bar wanting to be installed and I kept installing it. I finally checked and I have it on the list of installed updates a dozen times--but it still keeps appearing on my task bar asking to be installed. It's like a spell gone wrong. How do I stop it and/or get rid of it? I don't even have works 8 on my computer. Thanks, Don.
Security Update for Microsoft Works 8 (KB967043)
Installation date: ‎15/‎07/‎2009 4:29 PM
Installation status: Successful
Update type: Important
A security vulnerability exists in Microsoft Works 8 that could allow arbitrary code to run when a maliciously modified file is opened. This update resolves that vulnerability.
More information:
http://www.microsoft.com/technet/sec.../MS09-024.mspx
Help and Support:
MS09-024: Description of the security update for Microsoft Works 8: June 9, 2009
View 4 Replies
View Related
Sep 23, 2009
My PC had been working fine until 10th Sept when I downloaded some new updates from Microsoft, at once the internet connection slowed to a trickle.
I contacted my ISP but after running some tests they said their signal strength was good and suggested I had a virus or a trojan. Cue outbreak of paranoia and much scanning with various programmes (which all had extreme trouble downloading their updates), after they all came up clean - apart from a few minor trackers - I posted a thread in the 'Network and Internet' forum and was advised to check the Events Viewer.
This showed a flurry (about 50 or so) Yellow Flags saying that the last updates may not have been applicable to my system, after some Google searching about these updates and the internet I narrowed it down to KB905866, but even after uninstalling the internet connection is still a trickle.
I tried uninstalling all the 10th Sept updates but that made the IE8 very unstable (sudden crashes and hanging), so put them back on just to get back to where I was.
I thought I'd set the PC to create Restore points but there were none, but one of the posts on another Forum about this update says it can wipe Restore points.
I was using ZoneAlarmExtreme when this started, but have now uninstalled it and am running Kaspersky 2010 and there are no conflicts of firewalls etc.
View 9 Replies
View Related
May 8, 2010
This message is to inform you that Microsoft will soon begin discontinuing newsgroups and transitioning users to Microsoft forums. Why? As you may know, newsgroups have existed for many years now; however, the traffic in the Microsoft newsgroups has been steadily decreasing for the past several years while customers and participants are increasingly finding solutions in the forums on Microsoft properties and third party sites. This move will unify the customer experience, centralize content, make it easier for active contributors to retain their influence, mitigate redundancies and make the content easier to find by customers and search engines through improved indexing. Additionally, forums offer a better user and spam management platform that will improve customer satisfaction by encouraging a healthy discussion in a clean community space. To this end, Microsoft will begin to progressively shift available resources to the forums technology and discontinue support for newsgroups.
In addition to offering a compelling online browser experience, for those users who prefer to use an NNTP (newsgroup) reader to participate in the newsgroups community, we have developed a solution called the NNTP Bridge which allows a user to connect a variety of supported NNTP readers to the forums they would like to participate in and continue having the NTTP reader functionality........
View 9 Replies
View Related
Aug 18, 2009
Effective August 1, 2009, Microsoft discontinued support for "Office Update" and the "Office Update Inventory Tool". Aside from security updates, in order to continue obtaining the latest updates for Microsoft Office products, use either Microsoft Update or Automatic Update. Read FAQ below -
View 8 Replies
View Related
Jul 17, 2009
This update keeps installing over and over It has now installed successfully 7 times and is shown as successful in the Update History list - 7 times!
I suppose I could uninstall VirtualPC since I have not been using it lately.
I should mention that it does not show up in the Control Panel | Progarams and Features Installed Updates list, though.
One other thing: VirtualPC is not supposed to work on Vista, but it does. In fact my son does development using it daily.
View 9 Replies
View Related
Sep 28, 2008
I just used Windows Update to install Microsoft Tinker game on my Vista Ultimate x64. Unfortunately, I couldn't find it anywhere to play with it.
View 9 Replies
View Related
May 15, 2010
im having a problem on my Vista...my display adapters on DEvice manager has a (!) sign...i cant update my Microsoft Windows Standard VGA Adapter version 6.0.6000.16383 6/21/2006. please teach me were can i download the driver...i hope someone teach me to resolve this.
View 6 Replies
View Related
Apr 22, 2009
I keep getting a message that this update is ready to install. I have installed it about 10 times, but after it is installed, I get the update icon and the same update is there ready to be installed. When I look at the installation history, it shows that it has been installed successfully. HOW do I keep this update from showing up time after time? Security Update for Microsoft XML Core Services 4.0 Service Pack 2 (KB936181)
View 2 Replies
View Related
Dec 27, 2008
I hope you can help as this is driving me nuts. I have installed Vista Premium 32 bit I have a net gear wireless pci card and have jsut installed Vista sp1 premium on my com fresh after I though it was some thing I have installed wrong on my com as I can not dl any updates from microsoft or dl any thing from microsoft web pages eg windows messenger. I keep getting a error number on my updates as follows : code 8054402c and from the webpages from microsoft it jsut come up with a can not diisplay page after i click download. I have tried on both Ie and firefox same thing happens.
View 4 Replies
View Related
Sep 20, 2009
I cannot send or recieve emails, In my accounts set up i have said my incoming server name is pop.microsoft.com and outgoing as smtp.microsoft.com.
View 9 Replies
View Related
Oct 17, 2009
I was using Microsoft Outlook Express as my mail client. Then Microsoft advised users to update to Windows Mail since they no longer supported Outlook Express..so I did. Now Microsoft is directing users to install Microsoft LIVE Mail? What is the difference between Microsoft Mail (which I am running) and Microsoft LIVE Mail....and, why would a user run LIVE over MAIL?
View 4 Replies
View Related
Mar 28, 2009
I Just want to know why my screensaver doesn't work using a Microsoft wireless laser mouse, also microsoft wireless keyboard, windows vista.
View 9 Replies
View Related
Apr 24, 2008
Hello, my son's pc crashed and will only boot to the black screen with green loading bar, then quits. Monitor keeps going to sleep.
I tried everything: system repair (which says it can't do - corrupt registry). Restore (can't - no restore point was set.) Go back to last known good config - won't work it crashes.
I ran a memory test and all was good.
So, I saw on this site where it was advised to do an upgrade/repair, but I can't because the option is grayed out and disabled. I tried starting with the disc in, and also by starting and then putting the disk in. If I wait until the machine starts and put the disk in, it will not work. It crashes. If I put the disk in and then start the machine is when I get to the install screen and eventually the 'update is disabled' screen.
I'm really trying to avoid a new install. I wonder if there is a way to get around the disabled thing in my case?
View 9 Replies
View Related
Jan 19, 2009
I have a dell Inspiron 1525 with vista home premium and I resently downloaded Last chaos and I tried to play it, and It was fine logging in fine for a couple of seconds and then it crashed. anyone know how to make it work? when it crashes my computer is fine, the screen is fine everything is it simply says, program not responding so i exit out ive uninstalled it and re installed it and run it as an adminstrator nothings working
View 5 Replies
View Related
Aug 9, 2008
my computer crashed and I tried to recover it using a recovery disk.. but suddenly I choosed and click the TOSHIBA recovery wizard.. And there's a 2 option...Recovery of factory Default Software and the 2nd option is Erase the hard disk(delete all the data and partitions from your hard disk) then I took 10 hours of this..then when it finished the process.. I try to restart my laptop then suddenly appears this word with a black screen.. (invalid partition table)
View 6 Replies
View Related
Oct 26, 2007
Everytime i start Photoshop 7 Windows Data execution prevention closes the application with the following message. I am running Windows vista ultimate 64 bit.
View 4 Replies
View Related
May 5, 2008
I find every morning Outlook crashed. Computer is continuously busy (25% of CPU)Rebooting solves the problem, but next morning again crash. Only program running during the night (as far as I can see) is Windows Defender.
View 4 Replies
View Related
Mar 23, 2008
my PC crashed and will not boot, the NTOSKRNL.EXE is missing or corrupt, repair from the DVD does nor fix the problem. I need to reinstall but the only option I get when bootin from the DVD is to "Install from Windows" but Windows will not boot up.What can I do?
View 4 Replies
View Related
Jun 1, 2010
I'm a Vista and IE user, not a Developer. Sequence of events:
last week... downloaded Vista Service Pack 1
this week... IE8 has stopped working... screen goes white... DEP
problem (blocks code execution) or DEP/NX No-Execute Memory
Protection.....................
View 9 Replies
View Related
Aug 1, 2009
I installed vista sp2 yesterday and now my laptop won't start. it offers two options, start in repair mode or start normally. I have an 18 month old Toshiba Equiium running vista home P 32 bit. If I start normally, the microsoft logo comes up and then the screen blips blue momentarily then it goes off. If I run the repair, it scans for faults, then prompts to run a system restore. I take this option and then it takes many minutes to attempt repairs - ultimately ending with 'windows cannot repair..."
there is a log with lots of 0x0 type errors notices (which are meaningles to me) I can't even get to the point where I could elect to restore to last best save or whatever. I have all my docs backed up on a portable HD but I cannot get past this failed repair message.
View 9 Replies
View Related
Mar 31, 2009
Recently, my Vista x32 crashed. I deleted it and put on Windows XP. (This was three days ago) I now wish to go back to Vista, as I didn't expect this and never planned to turn to XP. A vista CD did not come with my laptop, but I have a serial. My friend had Vista and when he installed it, it would only be compliant with the serial number it came with. Is there any way to recover my Vista?
View 9 Replies
View Related
