Newbie chick here - and no I am not blonde! Anyway, I just customized a HP laptop that I received 2 weeks ago and have had nothing but problems. Paid alot of $$ for this system and very disappointed.
View 5 RepliesI just got Expression Web V3. It tells me I don't have .NET Framework 3.5 SP1 installed. When I download the .NET SP1 from MS it installs about half way then says an error was detected and unwinds everything. The error box says "see Error Log". What error log? where? When I click on it, MS Visual Studio 2008, it comes up but has its own error box "file cannot be opened because it is being used by another application". Talk about frustrating!
I reinstalled/repaired .NET 3.5 it went fine -- at least no errors reported.
Besides Visual Studio 2008, I show
..NET Component Framework 1.0 SP3 developer
..NET Component Framework 2.0 SP2
..NET Component Framework 3.5
..NET Framework 3.5
Really could use some suggestions here as I just want to get Ex Web 3.0 going.
For some reason, my computer refuses to install the: Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update(KB951847) x64. It fails every attempt and is listed as an "Important" update. The error found was: Code 643 Windows Update encountered an unknown error.
View 4 Replies View RelatedI've tried numerous times to Install Vista Sp1, but without success. The install appers to go well, reaching 100% at stage 3, but then the screen reports the SP did not successfully install, and proceeds to roll back. On Checking the message in Windows Update, the install failed with error 80004005. I've raised the issue directly with MS, but the advice to install the SP in Safe mode has not helped. I've also trawled various forums and cannot find any reference to the specific error code.
I own a Sony Vaio VGN-FZ1. A number of forums seem to suggest it might be a hardware issue, and I have tried disabling / uninstalling various devices to
see if this helps, but this also has not got me any further. Has anyone else experienced this? Does anyone know what this error code means? Is there a way to force the SP to install despite this error code (it does get to 100% at stage 3 after all, so maybe it does install, but one of the packages check routines is picking up an error which doesn't really exist???)
My previous setup was XP on drive C and Vista on drive D. Drive C has failed and been replaced, XP loaded.Vista is no longer available. Drive D files are intact but I do not know how to load Vista on that drive without wiping out the existing files. Looking for the brains I don't have...
View 5 Replies View RelatedSelf explanatory. So bad I couldn't even boot in safe mode, or use the ACER recovery feature. It also destroyed every restore point, so no going back. Now I have no OS on my laptop and have to pay for a "Recovery disk" because Microsuck is too gutless to actually allow companies (like ACER) to send a physical Vista install disk with their computers. Needless to say I'm a little steamed.
View 9 Replies View RelatedSelf explanatory. So bad I couldn't even boot in safe mode, or use the ACER recovery feature. It also destroyed every restore point, so no going back. Now I have no OS on my laptop and have to pay for a "Recovery disk" because Microsuck is too gutless to actually allow companies (like ACER) to send a physical Vista install disk with their computers.
View 9 Replies View RelatediaWin.exe not working properly
View 6 Replies View RelatedWhenever I attempt to install the full version of America's Army 2.8.3 I am informed that that the ISKernel failed to install and that I should make sure i have uthorization on this machine. I am already set as the computer administrator.
View 7 Replies View RelatedI got a simple situation here. How do I fix this?? I tried to install failed updates a couple of times.
View 4 Replies View RelatedI have attempted many times and failed to install a security update for Microsoft.NetFramework,version 1.1 service pack 1 (KB29729). I receive a failed to install with a Code 66A. I have tried to find an explanation for the code to no avail. This is listed as an important update for vista but I am stumped as to why it won't install.
View 7 Replies View RelatedI have had no trouble instaling it in the past. But all of a sudden one day I chose to freshly install vista. So using the standard installation procedures and when I went to install my netgear usb wireless adapter Which used to work failed to install. I thought it was the adapter so I upgraded to a very nice d-link usb adapter...and that too failed to install. So I installed a fresh copy of so on he same drive and reformatted it and that worked just fine.
So I tried reinstalling vista and of course it didn't work. So now I'm really confused and typing this on the only available Internet device which happens to be an iPod touch LOL. Does anyone have an idea as to what is going wrong? Btw I have an oem copy of vista ultimate x64 pre sp1. The netgear adapter was the wusb111 and the d-link adapter is the dwa 160.
When I try to install service pack 2 I get this message: Installation was not successful. A system error prevented the service pack from installing. Please download and run the "Check for system update readiness" tool at Description of the System Update Readiness Tool for Windows Vista, for Windows Server 2008, and for Windows 7. If the "Check for system update readiness" tool doesn't fix the problem, visit the microsoft website for more information. Error: TRUST_E_NOSIGNATURE(0x800b0100)
View 4 Replies View RelatedThen she attempted to un-install Norton 360 and install Norton 2010. Since then, she has the limited connectivity problem. She's un-installed 2010 but 360 still appears in the add/remove programs. If you click on it, it says there's a missing path. With either wireless or a cable connection, it fails to get a proper IP address from the router. Another PC on the network still works fine. My theory is that some system file of Norton's is still in there somewhere trying to intercept network traffic and screwing things up. I've tried following trouble shooting guides for the general limited connectivity problem and none helped (I know the router works fine with Vista and everything has been re-booted and this has been going on for weeks).
View 4 Replies View RelatedI did a new install with vista business. 'upgrade' . The reason for this was a new hard drive. I couldn't -then- see the point of installing xp then vista then start the long hard migration process. I was told of a work around, so I did. Now I'm getting 'activation' notices which when I try I get "this is an upgrade pack not a clean install" failed Now I have XP disks/codes here which are genuine -can I phone MS and would they allow me to quote a XP product key rather than having to go through the whole process again? All software legit and above board - can send pics to prove ;-)
View 4 Replies View RelatedThis started with Windows update, it wouldn't even download, just gave me an error. I tried Safe Mode and no good, then back to normal mode and it worked! I was happy. Sp2 started installing and got through stages 1 and 2 then rebooted, got through stage 3 up to 100%, paused for a few minutes then said the service pack failed to install and it started undoing everything. I've tried this a number of times over the past year since it was released and it has always failed. Just for disclosure's sake, I have OSX installed on another partition, but that was installed in June when the SP2 trouble started back in January, so it shouldn't be related.
View 9 Replies View RelatedI have Windows Vista Home Premium edition. I just purchased a Sprint World Edition Blackberry 8830. I am trying to install the disk on my laptop and at the end of the install I get this message: "1. Failed to install ISKernal Files. Make sure you have appropriate privileges on this machine."
My machine is not networked. I am the only one who uses it. Sprint and Blackberry support do not have this error message and say it must be Microsoft. And of course I am a month beyond my 90-day free support.
last night before bed I clicked shutdown and install updates in Vista. I woke up this morning and my computer will not turn on. It leads me to this: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your language settings, and then click "next"
3. Click "repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assisance.
File: BootBCD
Status: 0xc000000f
Info: An error occured while attempting to read the boot configuration data.
problem I have is that I do not have vista installation dvd. I am currently studying abroad in Rome and will take more time than I have to receive the dvd in the mail. None of my friends here have one either, but they all have the same make and model computer that I do. Is it possible for one of them create a installation dvd that I could use? Or could they make a recovery disc that could as least get me to the system recovery options screen?
I've spent all day trying to install dot net framework 1.1 on my system, which is necessary to run old programs with. It's obviously not compatable with the new Vista. These are the following things I have tried all day until my brain has broken:
I followed these instructions innumerous times, and when I attempt to install using Admin/Command Prompt, it tells me that the commands given here (and at every other place that has pointed me there, which are many!) are invalid commands. It won't allow me to delete the ">" after my name in order to put in the commands, or change anything. I've tried the commands in many different orders, and other commands, to no avail.
I followed these instructions as well, which didn't do a bloody thing.
Finally, tonight I followed these instructions, and have run into the same issue when attempting to install v. 1.0 and 1.1, which is that they're not compatable with Vista. (This also has left me with NO framework as I write this post.)
Now, I know I've done this before and installed dot net framework 1.1 just fine in the past, but I can't recall exactly what I did, but it was similar to along the lines of the first link's instructions. So why I'm having problems now is beyond me. Dot net framework 1.1 is very important to what I need to do, and I would really really appreciate if someone could help me before I poke my eyes out in frustration over this!
Installing dot net framework 1.1 for dummies on Vista?
I experienced endless WinUpdate update issues with .net framework on my W2K
pc - but so far none with Vista Ultimate.
I just ran 2 'Important' Vista WinUpdates - a hotfix and an update for .net
framework 3.5 SP1 - no problems.
However - it occurs to me that I never got a firm idea just how important
..Net Framework is to the average user like myself who's much less a PC
enthusiast than I was almost 20 years ago & primarily today more an email
and news junkie. So I checked out what Wikipedia posts on Net Framework -
and except for nerdy gobbledygook - got precisely no idea just how important
..NET Framework is to me.
May I ask a MS knowledgeable or other professional person to help me
understand 'just how important' for a user like me? If WinUpdate indicates
it's not 'essential' - than what exactly do I lose, if anything, by
uninstalling .NET Framework?
I have had recent trouble with my .Net. Specifically with QuickBooks not
opening up.
I called them, they said it was my .Net framework that was incorrect. We
deleted it and reinstalled it.
Now, of course, I cannot open other programs - the error message is that I
need to install one of the following: V1.1.4322 or V1.1.3705
A. WHERE are these versions available to download.
B. Is there possibly another version that will take care of this whole mess.
I have tried to find a number to contact you people but you are very
unavailable.
----------------
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not see the button, follow this
link to open the suggestion in the Microsoft Web-based Newsreader and then
click "I Agree" in the message pane.
{url}
NET framework 1.1. I want to upgrade to Windows 7 but .NET framework 1.1 isn't compatible is there anyway I can update it or shall I get rid of it?
View 7 Replies View RelatedI want to install sqlexpress which needs at least .net 2 SP2. So I removed my previosly installed Visual Studio 2003 and tried to install NET 3.5. No success. is there any way to install ANY .NET framework on Vista 64?
View 5 Replies View RelatedHow do I uninstall the .Net Framework?
View 4 Replies View Relatedwhy is my computer telling me it is failing to update Net Framework 1.1 SP1. I can't find 1.1 on my computer to update , do I need it.
View 9 Replies View RelatedEverytime I try to open a game or something requiring .NET Framework I get this error message:
To run this application you need to install one of the following applications: .NET Framework v2.0.50727
I already installed this, and it errored, and it did not appear on my add/remove so I couldn't uninstall it. So I tried deleting it manually through the Framework folder, which Vista won't allow me permission to do. So i did the next best thing and ripped it out onto my desktop. I tried to reinstall and the installer claims that 2.0.5 is already installed, and I can't even reinstall 1.0 or 1.1 because it errors, and I can't install 3.5 because it thinks there's a prior version. So now i'm stuck with three folders on my desktop I can't delete, no .NET Framework and seemingly no way of getting it.
when i run registry cleaner in vista manager Microsoft .NET Framework Unhandled exception has occurred in your application. attempted t read or write protected memory. this is often an indication that other memery is corrupt. for detailed it show long list of description. See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
at System.Drawing.SafeNativeMethods.Gdip.GdipDrawString(HandleRef graphics, String textString, Int32 length, HandleRef font, GPRECTF& layoutRect, HandleRef stringFormat, HandleRef brush)
at System.Drawing.Graphics.DrawString(String s, Font font, Brush brush, RectangleF layoutRectangle, StringFormat format)
at System.Windows.Forms.Label.OnPaint(PaintEventArgs e)
at System.Windows.Forms.Control.PaintWithErrorHandling(PaintEventArgs e, Int16 layer, Boolean disposeEventArgs)...........
I keep getting .net framework 3.5 family update (KB959209) x86 from microsoft, but when I tried to install this update I got error code 80070663..windows update encountered an unknown error.
View 5 Replies View RelatedUnhandled exception error has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately. The detailed report is appended. It will be seen that .NETFrameworkv2.0 is involved. When I skip the message the program runs but a similar warning (not shown here) is repeated with nothing achieved.
This incident follows a skirmish fought on my system between .NET Framework 3.5 and .NET Framework 3.0 following the installation of Nero 9.0.9.4 and Nuance OmniPage 17 during which I ended up with both .NET 3.5 and 3.0 installed, as neither package would install with 3.5 alone. I am wondering whether I now also need to install .NET Framework 2.0. Ideally I suppose I am seeking a .NET environment that will cope with everything that is thrown at it. Is it OK to have multiple versions of .NET installed concurrently? Perhaps I should just backup and then edit the icon overlay? Where would that be? (I have icon editor IcoFX 1.6.4)......
I'm new here and to Vista. I purchased my wife a new Toshiba Laptop for Mothers Day and here we are w/ an error already. I've never seen this kind of error before and I'm assuming it is software related and not hardware. But everytime we turn on the computer this error box comes up. Microsoft .NET Framework Unhandled exception has occured in your application.
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.FormatException: String was not recognized as a valid DateTime.
at System.DateTimeParse.Parse(String s, DateTimeFormatInfo dtfi, DateTimeStyles styles)
at libTMachInfo.CMachInfo.GetFirstBootDate(DateTime& dtFirstBoot)
at TSS.TSSForm.ReadSettings()
at TSS.TSSForm.TSSForm_Load(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()........................
I'm completely lost here. I just bought an Acer Aspire 4720z at the beginning of the month and I completely regret it already!! It came with Vista Home Premium, 2GB of memory, 120 GB hard drive and intel dual processor 1.83GHZ. About a week after I got it the stupid empowering technology framework errored out and hasn't worked since. I never even got a chance to make the recovery CD since I didn't know I would have to make one and didn't buy any DVD-r's.
Well I called Acer and they say the only way to fix the errors I'm getting is to restore to factory default and they sent me the set of recovery disks that I need. Well I guess I should of just said screw it and left it alone. It gets all the way through the restore to where it restarts then command prompt comes up sayings "Update device driver, please wait" Then the error "Windows could not update the computer's boot configuration. Installation cannot proceed" comes up. I click OK and it restarts the computer and now all I get is "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click "OK" to restart the computer and then restart installation".
I have tried to reinstall it probably over 7 times now with the same results. I was on the phone with Acer most the day yesterday. They gave me 2 ISOs to downlaod and burn that format and partition the hard drive. They work but when I go to put Vista on it, I get the same error over and over again. I really don't want to resort to sending it in for repair and they said chances are that's the next step. I'm half tempted just to put XP on it but I've only had it a month and I don't want to void the warranty. ? Let me know if you need any more information about my system.