.NET Framework 3.5 SP1 Install Can Not Working
Sep 1, 2009
I just got Expression Web V3. It tells me I don't have .NET Framework 3.5 SP1 installed. When I download the .NET SP1 from MS it installs about half way then says an error was detected and unwinds everything. The error box says "see Error Log". What error log? where? When I click on it, MS Visual Studio 2008, it comes up but has its own error box "file cannot be opened because it is being used by another application". Talk about frustrating!
I reinstalled/repaired .NET 3.5 it went fine -- at least no errors reported.
Besides Visual Studio 2008, I show
..NET Component Framework 1.0 SP3 developer
..NET Component Framework 2.0 SP2
..NET Component Framework 3.5
..NET Framework 3.5
Really could use some suggestions here as I just want to get Ex Web 3.0 going.
View 5 Replies
ADVERTISEMENT
Sep 8, 2009
Newbie chick here - and no I am not blonde! Anyway, I just customized a HP laptop that I received 2 weeks ago and have had nothing but problems. Paid alot of $$ for this system and very disappointed.
View 5 Replies
View Related
Apr 25, 2009
For some reason, my computer refuses to install the: Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update(KB951847) x64. It fails every attempt and is listed as an "Important" update. The error found was: Code 643 Windows Update encountered an unknown error.
View 4 Replies
View Related
Sep 9, 2009
I've spent all day trying to install dot net framework 1.1 on my system, which is necessary to run old programs with. It's obviously not compatable with the new Vista. These are the following things I have tried all day until my brain has broken:
I followed these instructions innumerous times, and when I attempt to install using Admin/Command Prompt, it tells me that the commands given here (and at every other place that has pointed me there, which are many!) are invalid commands. It won't allow me to delete the ">" after my name in order to put in the commands, or change anything. I've tried the commands in many different orders, and other commands, to no avail.
I followed these instructions as well, which didn't do a bloody thing.
Finally, tonight I followed these instructions, and have run into the same issue when attempting to install v. 1.0 and 1.1, which is that they're not compatable with Vista. (This also has left me with NO framework as I write this post.)
Now, I know I've done this before and installed dot net framework 1.1 just fine in the past, but I can't recall exactly what I did, but it was similar to along the lines of the first link's instructions. So why I'm having problems now is beyond me. Dot net framework 1.1 is very important to what I need to do, and I would really really appreciate if someone could help me before I poke my eyes out in frustration over this!
Installing dot net framework 1.1 for dummies on Vista?
View 9 Replies
View Related
Jun 24, 2009
I experienced endless WinUpdate update issues with .net framework on my W2K
pc - but so far none with Vista Ultimate.
I just ran 2 'Important' Vista WinUpdates - a hotfix and an update for .net
framework 3.5 SP1 - no problems.
However - it occurs to me that I never got a firm idea just how important
..Net Framework is to the average user like myself who's much less a PC
enthusiast than I was almost 20 years ago & primarily today more an email
and news junkie. So I checked out what Wikipedia posts on Net Framework -
and except for nerdy gobbledygook - got precisely no idea just how important
..NET Framework is to me.
May I ask a MS knowledgeable or other professional person to help me
understand 'just how important' for a user like me? If WinUpdate indicates
it's not 'essential' - than what exactly do I lose, if anything, by
uninstalling .NET Framework?
View 9 Replies
View Related
Mar 23, 2008
I have had recent trouble with my .Net. Specifically with QuickBooks not
opening up.
I called them, they said it was my .Net framework that was incorrect. We
deleted it and reinstalled it.
Now, of course, I cannot open other programs - the error message is that I
need to install one of the following: V1.1.4322 or V1.1.3705
A. WHERE are these versions available to download.
B. Is there possibly another version that will take care of this whole mess.
I have tried to find a number to contact you people but you are very
unavailable.
----------------
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not see the button, follow this
link to open the suggestion in the Microsoft Web-based Newsreader and then
click "I Agree" in the message pane.
{url}
View 9 Replies
View Related
May 15, 2010
NET framework 1.1. I want to upgrade to Windows 7 but .NET framework 1.1 isn't compatible is there anyway I can update it or shall I get rid of it?
View 7 Replies
View Related
Sep 30, 2009
I want to install sqlexpress which needs at least .net 2 SP2. So I removed my previosly installed Visual Studio 2003 and tried to install NET 3.5. No success. is there any way to install ANY .NET framework on Vista 64?
View 5 Replies
View Related
Jun 27, 2008
How do I uninstall the .Net Framework?
View 4 Replies
View Related
Oct 22, 2009
why is my computer telling me it is failing to update Net Framework 1.1 SP1. I can't find 1.1 on my computer to update , do I need it.
View 9 Replies
View Related
Jun 30, 2009
Everytime I try to open a game or something requiring .NET Framework I get this error message:
To run this application you need to install one of the following applications: .NET Framework v2.0.50727
I already installed this, and it errored, and it did not appear on my add/remove so I couldn't uninstall it. So I tried deleting it manually through the Framework folder, which Vista won't allow me permission to do. So i did the next best thing and ripped it out onto my desktop. I tried to reinstall and the installer claims that 2.0.5 is already installed, and I can't even reinstall 1.0 or 1.1 because it errors, and I can't install 3.5 because it thinks there's a prior version. So now i'm stuck with three folders on my desktop I can't delete, no .NET Framework and seemingly no way of getting it.
View 4 Replies
View Related
Nov 19, 2008
when i run registry cleaner in vista manager Microsoft .NET Framework Unhandled exception has occurred in your application. attempted t read or write protected memory. this is often an indication that other memery is corrupt. for detailed it show long list of description. See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
at System.Drawing.SafeNativeMethods.Gdip.GdipDrawString(HandleRef graphics, String textString, Int32 length, HandleRef font, GPRECTF& layoutRect, HandleRef stringFormat, HandleRef brush)
at System.Drawing.Graphics.DrawString(String s, Font font, Brush brush, RectangleF layoutRectangle, StringFormat format)
at System.Windows.Forms.Label.OnPaint(PaintEventArgs e)
at System.Windows.Forms.Control.PaintWithErrorHandling(PaintEventArgs e, Int16 layer, Boolean disposeEventArgs)...........
View 4 Replies
View Related
Aug 13, 2009
I keep getting .net framework 3.5 family update (KB959209) x86 from microsoft, but when I tried to install this update I got error code 80070663..windows update encountered an unknown error.
View 5 Replies
View Related
Jun 18, 2009
Unhandled exception error has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately. The detailed report is appended. It will be seen that .NETFrameworkv2.0 is involved. When I skip the message the program runs but a similar warning (not shown here) is repeated with nothing achieved.
This incident follows a skirmish fought on my system between .NET Framework 3.5 and .NET Framework 3.0 following the installation of Nero 9.0.9.4 and Nuance OmniPage 17 during which I ended up with both .NET 3.5 and 3.0 installed, as neither package would install with 3.5 alone. I am wondering whether I now also need to install .NET Framework 2.0. Ideally I suppose I am seeking a .NET environment that will cope with everything that is thrown at it. Is it OK to have multiple versions of .NET installed concurrently? Perhaps I should just backup and then edit the icon overlay? Where would that be? (I have icon editor IcoFX 1.6.4)......
View 8 Replies
View Related
May 15, 2009
I'm new here and to Vista. I purchased my wife a new Toshiba Laptop for Mothers Day and here we are w/ an error already. I've never seen this kind of error before and I'm assuming it is software related and not hardware. But everytime we turn on the computer this error box comes up. Microsoft .NET Framework Unhandled exception has occured in your application.
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.FormatException: String was not recognized as a valid DateTime.
at System.DateTimeParse.Parse(String s, DateTimeFormatInfo dtfi, DateTimeStyles styles)
at libTMachInfo.CMachInfo.GetFirstBootDate(DateTime& dtFirstBoot)
at TSS.TSSForm.ReadSettings()
at TSS.TSSForm.TSSForm_Load(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()........................
View 5 Replies
View Related
Dec 28, 2008
I'm completely lost here. I just bought an Acer Aspire 4720z at the beginning of the month and I completely regret it already!! It came with Vista Home Premium, 2GB of memory, 120 GB hard drive and intel dual processor 1.83GHZ. About a week after I got it the stupid empowering technology framework errored out and hasn't worked since. I never even got a chance to make the recovery CD since I didn't know I would have to make one and didn't buy any DVD-r's.
Well I called Acer and they say the only way to fix the errors I'm getting is to restore to factory default and they sent me the set of recovery disks that I need. Well I guess I should of just said screw it and left it alone. It gets all the way through the restore to where it restarts then command prompt comes up sayings "Update device driver, please wait" Then the error "Windows could not update the computer's boot configuration. Installation cannot proceed" comes up. I click OK and it restarts the computer and now all I get is "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click "OK" to restart the computer and then restart installation".
I have tried to reinstall it probably over 7 times now with the same results. I was on the phone with Acer most the day yesterday. They gave me 2 ISOs to downlaod and burn that format and partition the hard drive. They work but when I go to put Vista on it, I get the same error over and over again. I really don't want to resort to sending it in for repair and they said chances are that's the next step. I'm half tempted just to put XP on it but I've only had it a month and I don't want to void the warranty. ? Let me know if you need any more information about my system.
View 4 Replies
View Related
Jan 21, 2008
I'm in the process of building a new computer and I bought an OEM version of Vista 64 to use. Now all my versions of Windows have been OEM with each new computer I have got but they have never before been like this one. I'm not ready to install it yet as I still have a couple of bits of hardware on back-order I'm waiting for but the OEM Vista 64 info on the package says I need the OPK to install it. Does this mean I can no longer install my own OEM operating systems ?
View 4 Replies
View Related
Mar 23, 2008
I need to get Vista install my HP printer/scanner PSC 950. It recognize the printer and try to install drivers for it, but does not find any drivers. It asks me to input my CD for the printer, and I have tried that with no luck. On HPs website the say that my printer is built in to Vista and that Vista should install it with no problem. This is not true since I cant make Vista install it.I have tried to unplug/plug the USB cabel for the printer, and Vista does the same thing every time, trying to install the driver for it with no success. I have Windows Vista Home Premium on a HP Pavilion dv6000.
View 8 Replies
View Related
Aug 23, 2009
I had a Vista 32bit, and made the choice I wanted to goto 64bit. I got a new motherboard an Intel DP45SG running a quad core, i think 9550, but I dont have the exact specs in front of me. Then i am running four ddr3 corsair ram chips 1gb. I have two wd drives, don't rember the models off hand either. I have replaced the cables to the drives, ran just the drive by itself. I had a Nvidia Gefore 9600gt, but I replaced it with a ATI 4850 1gb ddr2 card. I am having the system take forever to run applications and do file copies. I opened up outlook 2007 and it took literally 15mins for it to open the mail box. Itunes takes about 20mins to open up. I can barely even use world of warcraft online half the time. I tried to copy files from the old hard drive to the new hard drive, they copied at 12kb/sec. Intel had a bios upgrade and I did that, I downloaded every driver possible. I turned off Index searching, Im to the point of going, is it the proc, memory, hard drives or all three. or heck the psu. Im totally lost as to what needs to be done to get this thing working. From what I can tell its only the file copies and the 32bit applications. Also, current windows updates, at SP2 atm.
View 9 Replies
View Related
Mar 29, 2008
A friend's computer. She hasn't used it in the six months since I helped her buy it, so it hasn't been online. Before I go online to download updates like SP1, I want to install a firewall. I've downloaded Comodo's latest free firewall for Win32 as well as various freeware antivirus and antispyware software. The problem is trying to install ANY of these programmes.
When I double-click the installation file a window pops up telling me that the installation programme has stopped working. I've disabled Windows worthless firewall, but that doesn't solve the problem. how I can install security software on this computer. I use WXPpro, so I don't have these problems on my PC.
View 9 Replies
View Related
Apr 16, 2008
if their updates don't come through after installing sp1? If so, I have windows 32 bit os and it is set to install automatically at 3 am, but my compuer is always asleep then, but when I wake it up in the am, I used to get a windows symbol at the bottom right telling me there is an update avail.! Now, it won't do that after the update to sp1? I just recently changed the time to auto. update at 1 pm, when my computer is turned on, so I am waiting to see if it will do that. I have checked the options and they are set right, I just think that after the install of sp1 my os now does not recognize when there is an update avail.
View 4 Replies
View Related
Feb 13, 2010
i installed vista 64 bit yesterday on a new macine. its a very erarly copy. i seam to be having isues with the windows updates working. it keeps downloading same files over n over. i had to repair vista start up a couple tijes now. im trying the falowing download of ms website i just hope they right. sp1: Windows6.0-KB936330-X64-wave1.exe sp2: Windows6.0-KB948465-X64.exe if this dosent work
View 4 Replies
View Related
Nov 17, 2009
Side by side error and error 1935. I just did a clean install of vista and am having issue staying connected to the internet. keeps on cutting out every few minuets
View 9 Replies
View Related
Mar 26, 2008
I try to install any downloaded software, for example Winamp, Firefox, etc, it does not work. I will get a popup that says "(program name) has stopped working. A problem has caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
It has done this with every file I've downloaded and tried to install. Also, some MSI files I've downloaded (turbotax update, etc.) do nothing after I try to run them. I've verified that the software is compatible with Vista (per the places I've downloaded them from), turned off UAC, disabled Windows Firewall and Defender, Run as Admin, and even tried in Safe Mode. Also, I've run Windows Update and it says there are no available updates.
View 9 Replies
View Related
May 28, 2009
Messenger doesn't run after SP2 was installed so I uninstalled the complete Live package restarted and tried to reinstall , but get the message Couldn' install application and unknown error. 0x80007ee6 Try later I tried later, I restarted Vista and tried again but no change still the same.
View 8 Replies
View Related
Jan 16, 2010
I have 2 identical HP Pavilion dv4 laptops running Vista Home Premium x64. After installing Silverlight plugin on a clean machine, the USB mouse stopped working with all of my mice. Uninstall of Silverlight is not helping. It seems like Silverlight somehow corrupts the drivers (or maybe some other problem) that prevent the USB mouse from working. The touch mouse is still OK. I've been struggling with this for a while and spent ton of time without any progress. I do need to use Silverlight in my work and I have to have an external mouse.
View 4 Replies
View Related
Oct 5, 2008
i just did a brand new install of vista ultimate x64 on my pc (asus p5b, e6400 intel cpu, ati aiw x1900). it seems like every app on my pc is crashing. when i launch ie and go to Internet i get "ie has stopped working"
problem signature:
problem event name: appcrash
application name: iexplore.exe
application version: 7.0.6001.18000.....i get the same message with windows media player and sidebar.the only thing that seems to work ok is firefox.i've also tried seen other posts but found no solution. before i go back to xp
View 5 Replies
View Related
Jul 17, 2008
I am about to install Vista64 home premium on a new build with 8 megs of RAM. The disk is Vista64 SP1. I was wondering if it is still recommended to install Vista64 with only 1 stick of RAM first prior to installing all 8 megs? Or because the disk has SP1, is this no longer an issue?
View 9 Replies
View Related
May 25, 2008
I would like to check the memory for errors BEFORE I load/install Windows Vista Home Premium x64 to avoid install hang-ups. Can you make an ISO CD of this program, load it in your CD/DVD drive and check your memory for errors? I recently updated the BIOS on the board (DP35DP) and it does show all of the 4GB of Kingston ValueRam PC800 1.8v (2x2gb) installed. I have good reason to believe that it's from a respectable manufacturer. Just want to make sure the memory is good before I load up the OS.
View 9 Replies
View Related
Dec 6, 2009
I am helping a friend install windows updates on her Sony VAIO laptop with Vista Home Premium SP1 installed. Laptop had not been updated since January 2009. All updates completed fine with the exception of KB973565. When installed via automatic windows updates I get the following error...........
View 9 Replies
View Related
Jan 30, 2007
I'm assuming a clean install with an upgrade license will be identical to a clean install with a 'full' copy, except that at some point during the process, it will ask for my key for Windows XP? I just want to confirm this is the case before I go buy an upgrade copy. one last question to tack on here - if I have a desktop and a laptop computer will it let me install the same copy and license key of Vista on both? I know some MS products in the past have allowed you to install on more than one computer because they realize a lot of people have more than one computer but they only work with one at a given time.
View 6 Replies
View Related