I can't track down the exact thing that changed, but many of my internet plug-ins (QuickTime, Silverlight, Air) won't work properly. I will install the plug-in, then when I go to a site that requires it, it says it's not installed, despite clearly being the Program registry.
When I use QuickTime, I can go to various sites that have QT movies and they load fine, but if I go to Apple.com, it says I need to grab the newest QuickTime. Silverlight apps won't load at all. Any time I go to Adobe's marketplace for AIR apps, despite having one running, it says that I need to install Air. This is in both IE7 and Firefox.
I'm running Windows Vista Home Basic, and randomly my internet browsers just totally stop trying to connect and just spit out error messages, but everything else still works (usually). MSN, Steam, my antivirus updates on time, everything that isn't HTTP pretty much. The internet browsers will last anywhere from 5 minutes to 24 hours before keeling over. I've done a pretty thorough Google search on this and I'm at least not alone, but in another sense I am...
A lot of people have said "oh I disabled/uninstalled ZoneAlarm or Bitdefender or so and so a program and it worked" but I don't run those. Never have had ZA or anything on my computer. The only program I have in common with the most common ones is Spybot S&D, and I disabled that on startup and sure enough, didn't work. I do not have any Vista service packs, I don't think. Nothing explicitly called that anyway. I have a bunch of updates that I installed when I got the computer, so I can't uninstall SP1 to fix it since I don't think I even have it.
Yesterday I unpluged my headphones from the jack located in front of the computer because the wire became tangled, when I plugged them back in, I no longer got sound, so I restarted the computer thinking that was the problem and it still didn't work. I have checked the volume and sound card and they are fine. I can't even hear the test sound.
As you can see in this image my "Search" selection (I don't know what can I call it) is GONE. It's not in my "Start Menu". Can anybody please tell me how can I get it back, and where did it go in first place?
I dont have windows vista dvd so i cannot reinstall from it. I had a back up but its completely useless. I have a oem key that was coming with the pc.windows update dont want to work anymore.
"Windows could not search for new updates" Errors found: Code 80070490 Windows Update encountered an unknown error.
Curious thing is it sais i dont have any currently update installed in my pc anymore. Few days ago the list was full with updates and now I dont have any on the list. For make it worse now my system restore tells me that i dont have any system restore point so i cant restore to any point before i get all the errors and stuff.
So I am goofy and want my Vista Ultimate to play my own wav files instead of the ones it came with. but they simply don't play at all. I have done everything I know how to get this to work. I go to control panel sounds and the sound tab and have put the .wav files i want to use into the C:/Windows/Media folder and am able to select them through the sound menu... but the test option plays nothing for my wavs and it doesnt do anything when the system is supposed to make said sound...
I even checked all the properties to make sure they were the same the only differance I can see is that the sound files that work are owned by the system and the ones that dont are owned by administraitor. I do know how to change the ownership of files through the properties menu but even in Administraitor mode there is no option for system... I do not however think that it is the cause... is it that vista just doesnt want you using your own sound files?
i installed Windows vista from xp. The sound don't work anymore. In the device status it says this device is working properly. What should i do to fix this? Please help me.
There are websites that i visit that dont work right and i dont know if it is Vista or just my computer. I just got this computer, it is brand new. My old computer had XP. There is a site called BabyCenter.com. When i comment in the forums, it wont let me change my font size, color or anything. I could do all of that on XP. And when i go to game websites like playtopia.com, the game will load, but it wont show up. Is this Vista doing this, and if so how can i fix it??
I have Pinnacle PCTV Rave card and the old software dont work on vista,whitch software and drivers can i use for this card on vista? I try to find on official site but nothing.
when i try run a 2d mark 06 i have a message that "Open AL32.dll mising" error. when i install new drivers 162.22 and enable sli some of process have bin closed and i think that is should for this error. have some patch to resolve this problem or something else?
While installing a program, the process was interrupted and the install created 62000 files using 160gig in my syswow64 folder virtually using all my hd space. However when you go into the syswow64 folder, there is only about 2000 files and 1 gig of space used. I have set the folders to show all hidden files. When I go into the ms dos prompt and do a directory, the files match the 1 gig data.
I can't delete these 62000 files and free up the 160 gig space because I don't believe they are actually there on the hard drive but explorer thinks they are there. Is there any way to rebuild, sync, or otherwise get windows explorer to recognize the correct amount of files that are actually in my syswow64 folder.(2000files 1gig and not 62000files 160gig)
I have a brand new HP laptop with running Vista Home Premium. USB devices I regularly use is my digital camera, my iPod, a bluetooth USB stick, my printer and my wireless mobile internet device. Every time I plug one of these in, I have to pray that it will be recognised. If it is a good day, and it is recognized, it does not show up in My Computer or in Windows Explorer and I cannot unplug it safely. With some of the devices, every time I plug it in, I get a pop-up which says it is updating the driver software, but it does not seem to make any difference.
the computer connects to the Internet through a router that is connected to a cable modem through "ISP A". Now after the system is ready to go, the user takes it home, and they hook it up directly to their DSL modem through "ISP B", and the Internet won't work once the computer is home. What normally would be the settings I need to check provided all connections are good?
when I plug my speakers into the rear panel, realtek device manager still shows that I have not plugged anything into the back jack, and I have checked about 10 times to make sure it is in the right hole, this is also the issue with my microphone, when I try to configure my speakers, it shows a red "x" and says "not plugged in" I don't know what the issue may be, it does the same for microphone as well, and I can't figure out how to fix this. Also the "configure" and "set default" button's are grayed out and I can't click them. Also I am trying to use analog speaker's if that makes any difference with responses.
Internet Explorer 7 in 64-bit mode: Awesome! Minefield, otherwise known as Firefox 3 Beta 3, the only x64 Firefox browser currently available. Incredible...BUT! There are no Flash/Shockwave, amongst others, 64-bit plug-in's available, so I am forced to use FF2 x86, as well as IE7 x86, and I don't understand how anybody browses without, at a minimum, the Adobe Flash Player plug-in.
Most sites that I frequent require the Adobe Flash player, some do the Shockwave, too. I watch a lot of CNN and NBC News, and both of those, amongst many others, require the Flash player. Is anyone aware of beta plug-in's, or an ETA as to when they'll be released? Is there any other (temporary) solution that I am unaware of.
my friend just told me that if i buy one of those wireless usbs and plug it to my computer i get unlimit internet is that true? if so witch one should i get
To give a link (like "http://...") as a command line does not work anymore. Actually it was a standard since Win 98 and now Windows Vista displays the message "Application not found." My question: How to open link in Windows Vista using a command line? Should one use a new command like prefix like "mailto:"? These feature from Windows was really very practice for the developers. I link could be opened without being necessary to search for the default browser, an so on. Does anybody know how it can be done now?
How do I customise the Firefox 3 Browser to open each time as per Screenshot 3? At Screenshot 1: When I was using Internet Explorer 7 as my main Browser, I was able to customise the opening page so that it was 'clean' of all the 'flotsam and jetsam' rubbish that I had no interest in. My Customised Page in IE7 looked like this; screenshot 1:
At Screenshot 2: Now when I open Firefox 3, this is what I get........a page of 'stuff' that I neither need. nor want; Screenshot 2: At Screenshot 3:I have managed to customise and clean up the FF3 page as at Screen-shot 3 below,and it remains like this each time I open the Browser while I stay in session, however, if I log off or close and shut-down, it reverts to display like Screenshot 2, the next time I open up the FF3 Browser.
Screenshot 3: To keep my FF3 Browser opening page 'clean' as in the above Screenshot, what settings should I apply, to make it appear this way each time I open the Browser.
I have two machines running Vista Home Premium x64. but use 32bit IE. I am having trouble with one machine when opening IE that it always comes up in full screen mode and you cannot see the tool bar on the bottom. How can I change the setting so that when it comes up it is not full screen. I always have to either go into tools and uncheck it or launch another screen to get the tool bar on the bottom to come up.
I recently bought a Canon Rebel xti, and also a 2GB memory card along with it. I also got a Digital Concepts 21 in 1 card reader. Cin the card to the reader an error pops up saying the file doesn't have a program associated to it and i need to create one in the set associations control panel. I know where the set associations panel is, but i don't know how to actually associate a program to the reader.
i installed adobe 8 and easy media creator 9 .the 1st one dont let me click the accept button in license user agreement. the 2nd dont show the home page with all the functions. its because i still cant get the activex controls/plug-ins working. the site requiring them just show a blank page
Vista has detected my wireless router and I have the internet. However, wenever i plug a cable in (for faster speeds) it doesnt work It doesnt detect the cable i plug in
Every time I try and do something open browser, email, etc. A box pops up saying " Do you want to allow software such as Active X controls and plug ins to run" I know it is just a setting some where but I can't find it. So asking for some help in locating this setting so I can stop the box from popping up all the time. running Vista home premium X64.
I have somehow lost the digital mic input option on my Gateway laptop model W3501. The left scan is of my daughter's computer; the right scan is mine (the two computers are identical I bought them at the same time): Here's what happened: When I recorded on my computer with a plug-in mic, the onboard mic didn't mute, so I was getting recordings from both mics at once. I tried to disable the onboard mic. But after doing that, I get a lot of white noise when I plug in a mic: How can I get it back to how it was? (There are no restore points that go back as far as when I made the changes). I really need step-by-step help here - I'm not all that computer savvy.
I wonder if anyone could advise whether the following updates would affect my internet connection:? Update for Windows Mail Junk E-mail Filter [June 2008] (KB905866)Definition Update for Windows Defender - KB915597 (Definition 1.35.347.0)Windows Malicious Software Removal Tool - June 2008 (KB890830) Security Update for Windows Vista (KB951376) Security Update for Windows Vista (KB950762) Update for Windows Vista (KB947562) Security Update for Windows Vista (KB951698) Cumulative Update for Media Center for Windows Vista (KB950126)
I downloaded these yesterday and I have had problems with my wired modem and Netgear router today. I keep losing the internet connection. I've spoken to my ISP and Netgear. Netgear says that the modem keeps dropping the connection but my ISP says there are no problems at their end. It just seems odd that everything was working fine before I allowed these updates.
