Failure System Restoration
Mar 25, 2010When I try to open any file with the *.exe file, the 'Open With' window is displayed, I suspect I have a virus but can't use my antivirus and cannot use System Restore.
View 2 Replies
ADVERTISEMENT
System Restoration : Slows Down
May 8, 2008I'm running Home Premium n an HP laptop and up until yesterday everything was just fine. I also have SP1 and that went well. Yesterday, the system kept freezing or operating extremely slow and for the life of me I had no clue of what was going on. I had to press and hold the power button to shut down so I could reboot. I could not open Control Panel at all - the hour glass just kept swirling but nothing else would happen. After the reboot the system displayed the same behavior and at this point I noticed that it wasn't really locked up but in fact operating so slow that it appeared that way.
After no luck with the obvious I checked the startup group - nothing there, I cleared out the temp folders and files which seemed to help. I decided to simply use a system restore to a previous state of a few days ago. The first time I did this, I got a message that Windows was NOT successful with the restore. I tried an earlier restore point and got the same notification that the restore was NOT successful but it appeared that it was. A program I installed after that particular restore point was gone and the system seemed to be better -
Internet Explorer Restoration
Jun 19, 2009I am fairly new to Vista, all of a sudden today I have lost my file and edit at the top of my page, so |I am unable to copy and paste. I am in Classic mode. Any help to restore this so I can have File and edit at the top of the page would be wondeful.
View 9 Replies View RelatedRestoration Of Program Files(x86) From Windows.old
Sep 3, 2009install a fresh install over my old copy of vista and now I need to restore everything from the old one. got most everything except when i try to restore program files x86 it says access denied?
View 6 Replies View RelatedSystem Restore Failure
Sep 25, 2008I did a system restore and when the computer rebooted it freezes with a blue screen right before the windows logo is to appear and nothing else happens. I cannot get it to reboot in windows safe mode either.
View 6 Replies View RelatedUpgraded RAM - System Failure
Mar 26, 2008I'm running Vista Ultimate x64. I had 4GB of memory installed and just upgraded to 8GB. When I started the computer with the new memory sticks, I got this message: "The file is possibly corrupt. The file header checksum does not match the computed checksum." I booted from the Vista DVD and tried the Startup Repair but it says it did not detect any problems so it won't repair anything.
View 6 Replies View RelatedUpgrade Failure - System Components
Mar 23, 2008I purchased the Windows Anytime Upgrade to go from Windows Vista Home Premium to Windows Vista Ultimate. The upgrade fails stating it cannot upgrade some system components and that I should check the web to see if my machine is compatible. Restart the pc and re-run setup. I ran the compatibility before I bought the upgrade, but I did it again and all of the indicators show the pc is compatible. I am logged in with Administrator rights. I had disabled Aero, so I tried re-enabling before one install attempt - same result. I disabled all Symantec services and rebooted and retried the installation.
View 6 Replies View RelatedBlue Screen, System Failure
Jul 19, 2009I keep getting a quick blue screen. (not blue screen of death). It restarts so it has something to do with system failure. I've tried switching hard driver but the same problem happens. It just randomly turns blue when im browsing or playing games. it doesnt happen if i let the laptop just sit there.
View 5 Replies View RelatedBluescreen Of Death, Can't See Details About System Failure
May 22, 2008just god a new top-end audio interface and using cubase 4. I'm not sure which is causing the blue sceen. I've tried looking in the event viewer and can't see any details about the system failure. write debugging info is set to minidump. is there some other way to check the crash info in a log? or what are the best settings for "startup and recovery"
View 5 Replies View RelatedBoot Disk / System Recovery Failure
Mar 19, 2009I run vista 32 bit. I'm pretty sure it's Vista personal (PC didn't actually come with a Vista disk). I only use it for music and games,basic stuff. It's a Compaq....It shat itself recently, it wouldn't boot, so i borrowed the Vista Business disk from my dad to repair it/disk boot, and it worked fine, that was a couple days ago. Today it happened again, except it won't repair the same way. I start it up, it goes to the Compaq startup screen with 4 options; [Esc] Boot menu, [F9] Diagnostics, [F10] Setup, [F11] System recovery. Except I can never go to the diagnostics or system recovery menus, i press the keys and nothing happens. Then when i don't press anything it goes to a black screen with "Disk boot failure, insert system disk and press enter", so i do. Then it says "Windows is loading files" with a white bar below, once that's done it goes to the Microsoft Coporation green load bar that scrolls across over and over. Then it suddenly stops for a few minutes and a blue screen appears saying
"A problem has been detected and Windows has shut down to prevent damage to your computer DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps: Check to see if any new hardware or software is properly installed. If this is a new installation ask your hardware or software manufacturer for any windows updates you might need. If problems continue disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to disable or remove coponents, restart your computer, press F8 to select advanced startup options, then select safe mode. (pressing F8 does nothing for me) TECHNICAL INFORMATION *** STOP: 0x000000D1 (0x00000000, 0x00000002, 0x00000000, 0x87995395) *** nvstor.sys - Adress 87995395 base at 87991000, Datestamp 46671a61".....
Media Test Failure, Operating System Not Found
Sep 22, 2009One day my laptop was open and someone came in and SLAMMED the cover closed, and that messed something up. It will not start up correctly, if my computer is off, and then turned on, this is what happens: It starts successfully to the screen where you have to enter the boot password, after you enter the boot password, the following message just keeps being displayed: Quote: For Realtek RTL8111B/8111C gigabit Ethernet Controller v2.06 (070425) PXE-E61: Media test failure, check cable PXE-M0F: Exiting PXE ROM. Operating System not found.
Intel UNDI, PXE-2.1 (build 082) Copyright (C) 1997-2000 Intel Corporation It just keeps showing that over and over. I have a "Microsoft Windows Vista Home Premium 32-Bit Operating System Disk" which says "Use this disk to re-install your operating system". If I use this disk will it completely wipe all my old files?
System Restore Failure In Vist Home Premium
Mar 23, 2008I've tried restoring my HP laptop a few times with System Restore using different checkpoints and the same error message comes up afterward. Sytem Restore did not complete successfully. Your computer's system files and settings were not changed.
An unspecified error occurred during System Restore. I've tried using a few different restore points but this just comes up again afterward. I can't find anything addressing this problem;
Logon Process Failure, Failure - Security Options
Sep 20, 2009i was on Internet earlier today when i noticed that the videos were already completed buferring, but the videos were lagging; and firefox was performing kind of slow. i decided to re-start my computer. after re-starting the computer the logon process took extremely long, then an error message appeared: logon process has failed to create the security options dialog. failure - security options. i waited for the desktop to appear, then re-started again. but the perofrmance of the logon is still extremely slow. any suggestions?
View 9 Replies View RelatedDisk Boot Failure "INSERT SYSTEM DISK AND PRESS ENTER"
May 9, 2009I changed the Boot sequence to CD first, then HDD. Everything ran fine and vista seemingly loaded perfectly. After moving some files from my backup drive back onto my main one and installing some drivers, I was asked to restart my computer (for the drivers) so I did. Remembering that the boot sequence was still set on CD first, and since my driver CD was still in the drive, I decided to set the boot sequence back to the way I had it with XP: HDD and then CD. After doing this I quit BIOS and tried to boot, but I kept getting a message saying: DISK BOOT FAILURE. INSERT SYSTEM DISK AND PRESS ENTER.
So I restarted the computer again, this time with my Vista CD in the drive, and again, the computer wouldn't boot and told me to enter a boot disk. Not knowing what to do, I went back into BIOS and changed the boot sequence back to CD first, then HD. After doing this, and restarting with the Vista CD in the drive, my computer booted up with no problems whatsoever. I tried reinstalling Vista (twice), reformatting the target hard drive, changing the boot sequence around, pretty much everything I could think of......
SFC Failure
Mar 23, 2008When will Microsoft fix sfc /scannow? SFC (system file checker) returns a corrupt files found but cant fix message on new PCs. I reformated the HD and restored my Vista OS to factory. I tested a number of new laptops from various manufactures and they all have the same error message. I called Microsoft support and tier 2 support spent days then told me that the OEMs are messing up Vista. Did the OEMs add some spyware or modify the SFC utility? Why isn't there a fix for this very important repair utility?
C:Windowssystem32>sfc /scannow
Beginning system scan. This process will take some time. Beginning verification phase of system scan. Verification 99% complete.Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log
2 HDD And Boot Failure
Feb 17, 2009I have two 500GB HDD's. I have installed vista on first one and I am using the second one for just storing my data. Today, I wanted to unplug the second HDD [depot disk] but after unpluging it my sistem gave me an error: "Disk Error: Please Insert System Dısk" Why? My OS is not instaled on that one. Then I pluged it and opened vista and saw the following picture:
Vista sees my second HDD [D:] as a system disk. What is the problem? Was vista installed on the other HDD also when I installing vista since they were both connected?
SP1 Causes Email Failure
Mar 23, 2008The connection to the server has failed. Account: 'pop.earthlink.net', Server: 'pop.earthlink.net', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E
View 9 Replies View RelatedBack Up Failure
Feb 26, 2009I getting a notification on the bottom bar right hand side saying backup failure. When i click on this, "Backup status & configuration" window appears, which says
The Backup did not complete succesfully
CATASTROPHIC FAILURE (0x8000FFFF).
So then if i try and do a a back up from control panel. a green bar appears and then go's red completely.
Finaly i get the same message on the bottom right hand side.
HP Oem Activation Failure
Aug 10, 2009I have a 2 month old HP tx2 notebook. It activated fine when first booted. Used it abouy a month and IE crashed with a BSOD, and upon recovery I have a notice on the bottom of the desktop that it says this copy of windows in not genuine. When I reboot it says I must activate. When I try it fails and the only options are new product key or contact HP. I called HP and they said to use the key off the bottom of the computer which does not work. They then want me to do a complete reinstall which is quite unacceptible with all the work it took to get this new machine loaded to work with.
Can i buy a new license and be sure it is going to take. Buying a new copy of home premium unfair but is way better than all the work I would have to do otherwise. The OS is home premium 64 bit. I would not want to install a new copy because of the driver issues (touchsmart), I just want to use the key. When I try to activate I get: Buy new product key online. Try a different product key Contact Hewlett-Packard to help resolve this proble Have tried option 2 and 3 to no avail.
I would try option 1 if I could be assured it would work without loss of data. HP says to reinstall the OS. They told me Microsoft does not support OEM installs. Why not? There is no phone option. when I try to input a new key I get an 0xC004E003 error. Updates work fine and all my software works as well.The desktop background does not work and it has the not genuine at the right bottom corner. There does not seem to be a count down timer either.
PC Repair Failure
Apr 6, 2008I'm currently having a problem with my bosses PC. It will not boot into Vista. I have booted into safe mode and tried to rool it back to a restore point. This has not helped. I have also tried using Startup Repair on the Vista DVD which fails.....
View 6 Replies View RelatedFtp Download Failure
Jun 20, 2008When downloading video from a file sharing program, vista 64 will only allow 29 files to download all other files are blank ( ussualy 40 ) this program worked well and long with XP.
View 6 Replies View RelatedDxdiag Failure
Feb 5, 2010i need solving the n/a problems. things i used to be able to do on my computer i cant.
View 6 Replies View RelatedFailure To Update
Mar 11, 2009my computer is a Toshiba Satellite, and it will not install updates or shutdown properly. When I try to shut it down properly it says configuring updates I left it like this for a couple of hours and it made no difference. I am writing this thread on it now, and it runs perfectly other than the updates. It has flashed me a Blue Screen twice, and has never had this problem before. I need to know any Solutions before I completely wipe this partition and install XP.
View 7 Replies View RelatedFailure To Start
Jul 4, 2009yesterday i was playing on my computer and my pc froze. when i turned it on again it was asking if i want to repair the start-up files or just start, i selected just start and it took very long time loading the windows vista (the loading bar before the login) and when the bar was gone the computer screen turns blue for one second and it reboots. after that i selected to repair the files, and after some time i got the mouse icon on the blue screen with nothing else. what's my play here? i'm really bad with computers so i guess it's better to take it to a store?
View 5 Replies View RelatedStartup Failure!!!
Apr 11, 2008I don't know what's happen during the startup of Vista 32 but is the strangest startup of Windows I've never seen in the previous OS
1) Times to load Windows very long respect XP with a fast pc using CPU Intel DC2 4 2.40 GHz 4GB ram
2) Some applications don't load caused by UAC but not every startup
3) Some applications are "forget" to load or not visible in the tray
4) error messages of load failure appear but not at every startup
5) The little arrow on the tray bar that hide programs 1 time appear and 1 time don't appear and the programs are the same running and visible on the traybar. Perhaps the SP1 has resolved these problems? I use the italian version of Vista 32.
Backup Failure
Jan 15, 2008I am using Vista Home Premium. I tried to back up my hard drive to a Western Digital removable HD using Vista Backup and Restore. The backup failed and I got a message that read: "The backup target drive G: failed with the following error: The backup disk has a corrupted file system. Fix it using the disk error checking tool or choose a different backup location. (0x81000008)" I cannot find "the disk error checking tool". I have backed up using this removable HD a couple of times already.
View 4 Replies View RelatedFailure To Boot Up
Sep 3, 2009When starting my computer all I get is 'The User Profile Service failed the logon. User profile cannot be loaded. I can start the computer up in safe mode but what to do next?
View 4 Replies View RelatedHibernation Failure
Nov 17, 2009Windows Vista home premium with SP2 and later fixes installed. No apparent malware detected by Microsoft Security Essentials, Malwarebyte, spybot. Hibernation is turned on. Checked all devices to ensure none have the "wake on" feature activated. When I select hibernate, the screen goes black for a few seconds then the logon menu is presented. Hibernation never occurs.
View 4 Replies View RelatedVista Reinstall Failure
Mar 26, 2009I attempted to reinstall Vista Home Premium 32bit to my laptop. It fails to do so. I have attempted startup repair with no success.
View 9 Replies View RelatedCatastrophic Failure With Vssadmin?
Mar 11, 2009I want to perhaps lower the space for the shadow storage. I'm running Vista Ultimate 64 bit. I have run cmd as administrator (right click -> Run as administator). Whenever I put in vssadmin list shadowstorage an error comes up (see picture).
P.S: I've uninstalled daemon tool's to see if that was the cause, didn't work. I've also uninstalled SP1, didn't work, reinstalled SP1, didn't work. I'm not sure what the problem is. The third picture was made to show there is no System Restore in the System Tools area.
Task Scheduler Failure
May 15, 2010I've written a simple console application in Visual Studio 2010 (VB.Net) that I want to schedule with the task scheduler (in Vista Business). Everything looks ok when I schedule it. However, it ALWAYS returns the run-status of "Failure".
View 2 Replies View Related