I did a system restore and when the computer rebooted it freezes with a blue screen right before the windows logo is to appear and nothing else happens. I cannot get it to reboot in windows safe mode either.
View 6 Replies
I've tried restoring my HP laptop a few times with System Restore using different checkpoints and the same error message comes up afterward. Sytem Restore did not complete successfully. Your computer's system files and settings were not changed.
An unspecified error occurred during System Restore. I've tried using a few different restore points but this just comes up again afterward. I can't find anything addressing this problem;
Why can't I use system restore to restore back to certain restore points? I was only successful twice with it. When my laptap was new and when I used it after re-formatting my hard drive. On all occassions after those two instances I can never restore back to any restore point. It always says that "unspecified error" line. If Microsoft doesn't know what happend, how could I. Why did they bother putting system restore if it doesn't work all the time anyway. It gives you a false sense of security.
View 5 Replies View RelatedAfter installing SP2, on 5/25, System Restore seems to have stopped creating automatic restore points every 24 hours. I checked the Task Manger and it is set for 24 hours. It shows a restore point being created on 5/26. System Restore shows the last Restore Point being created on 5/25 about 1 hour after downloading.
View 5 Replies View RelatedI have a recent problem installing Windows updates on Vista Ultimate as the update process stays on 'creating restore point' forever. I've let it run as long as 7 hours in this state, with no change. It looks like the system is unable to make a restore point sucessfully. I know it has worked in the past, as I'm fairly up-to-date on Windows updates. Reading some other threads, I've tried using Disk Clean-up to remove all by the most recent restore points, and then try to disable/re-enable system restore - this part without success. When I check the system properties for System Restore, the System Restore button is greyed out. I've attached a screenshot of the screen for reference. I've checked the group policies to verify the System Restore is not disabled there.
View 9 Replies View RelatedI went to accessories/system tools/system restore and clicked it. I then got a small dialogue window asking if I wanted to continue and I clicked continue. That little window disappeared but then nothing hasppened. I was expecting to see a list of possible restore points but nothing showed on my screen. I clicked system restore again and got a message that system restore was already running and would now exit.
View 9 Replies View RelatedNot sure why but when I try to open system restore I get this message: "System Protection Settings has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I cannot make or restore my computer. If I go into system protection I get this error: C:WindowsSystem32SYSDM.CPL is either not designed to run on Windows or it contains an error. Try installing the program again using the original media or contact your system administrator or the software vendor for support.
View 9 Replies View RelatedI am new here and I have been having problems with my laptop for at least a few months now. And now I am fed up with it and just want to do a full system restore. I have no disks or previous system save dates. I talked to one of my friends and he said that i need a disc. I am just coming her for confirmation and or help. I am running a Toshiba Satallite P505D with and AMD Turion X2 dual core processor 4GB of Ram and a 64 bit operating system.
View 5 Replies View RelatedI wish the ****ing dumbass companies wouldnt preload computers with useless trials and dumb****. Ever since this computerwas purchased, I've had more problems than Lindsay Lohan had with DUI and drugs.
Holy ****. Games, Personalization, System Restore, System Backup (Error code 1068), User Accounts, and Windows Update. They show up, and then they dissapear right away. Any help please? Virusscan'd with AVG, tested hardware, it's clean, I dont know whats wrong.
I'm running Vista Ultimate x64. I had 4GB of memory installed and just upgraded to 8GB. When I started the computer with the new memory sticks, I got this message: "The file is possibly corrupt. The file header checksum does not match the computed checksum." I booted from the Vista DVD and tried the Startup Repair but it says it did not detect any problems so it won't repair anything.
View 6 Replies View RelatedWhen I try to open any file with the *.exe file, the 'Open With' window is displayed, I suspect I have a virus but can't use my antivirus and cannot use System Restore.
View 2 Replies View RelatedMy wife was on the internet and suddenly System Pro popped up and started scanning warning my wife of a virus attack on her computer and wanted her to buy the AV Pgm for $49.95. She just clicked all the exits and got off of the internet and now she is locked out of her computer. We can't get system restore to work, Can't get safe mode to work, She has AVG 8 installed but cannot start it. Tried SFC /scannow but was denied access. Tried putting the Windows XP disk in to do a repair and was unable to get it to start. I think the only thing to do is reformat the HD and start over but her PC ignores the A drive and the dvd drives. I cannot get into it in order to re format it.
View 9 Replies View RelatedI am trying to get rid of system restore shadow copies on my Vista home premium. I keep getting system error when I try to reduce the room used on my C drive as I only have 28gb of 145gb left. I have tried typing in:vssadmin list shadowstorage For the above command to run you must use elevated privileges:
1.. Click on the Start menu then click All Programs / Accessories
2.. Right Click on the Command Prompt option and from the drop down menu click on the Run as Administrator option
3.. At the command prompt type vssadmin list shadowstorage and Press Enter
(NOTE: if the command does not run change directories to c:windowssystem32) After the vssadmin has executed you will see results similar to the following:.....
The output above shows space used on the C: drive by System Restore is 237.419 MB. The maximum space allocated for System restore is 2.092 GB To view the number of restore points you currently have on your Computer run the following command vssadmin list shadows Next, to reduce the allocated space used by Vista's System Restore, use the following command: vssadmin resize shadowstorage /on=[OnVolumeSpec:] /for=[ForVolumeSpec:] /maxsize=[MaxSizeSpec] Where example: vssadmin resize shadowstorage /On=C: /For=C: /Maxsize=1GB When decreasing the space allocated to System Restore, you will loose the earlier system restore points. The advantage is gaining extra free space. If you are concerned with losing the previous restore points, wait until you do not need them anymore before reducing the allocated space. If you plan on upgrading to Windows Vista or running a clean install and will need extra space, consider reducing the space after installation has completed. It is not recommended to disable System Restore. The capability to restore to a previous point in time or having the new Shadow Copy feature available can be a time saver if something goes wrong or if you delete a file. source: John Barnett Windows Vista Support I keep getting an error message. I seem to remember doing this before with my XP but can't remember how. Is there an easier way?
I've been facing issues with backup / restore / system restore
View 7 Replies View RelatedThe mystery, at least to me, my PC was running almost 2 years. and it was not until about 3 weeks ago that System Restore began to save Restore Points the size of Approx 3 to 4GB daily. Prior to that the Restore Points were well under 1GB. it would be 3 to 6 days before I noticed the loss of 1GB. So why suddenly would the Restore File grew 1 one day from well under 1GB to between 3 to 4GB? That now is the issue I would like to know the answer to. and perhaps that file being saved with each Restore Point is not needed. I mean it wasn't needed for almost 2 years. so I can't think over night it became important but it sure is eating up HDD space.
View 5 Replies View RelatedI purchased the Windows Anytime Upgrade to go from Windows Vista Home Premium to Windows Vista Ultimate. The upgrade fails stating it cannot upgrade some system components and that I should check the web to see if my machine is compatible. Restart the pc and re-run setup. I ran the compatibility before I bought the upgrade, but I did it again and all of the indicators show the pc is compatible. I am logged in with Administrator rights. I had disabled Aero, so I tried re-enabling before one install attempt - same result. I disabled all Symantec services and rebooted and retried the installation.
View 6 Replies View RelatedI keep getting a quick blue screen. (not blue screen of death). It restarts so it has something to do with system failure. I've tried switching hard driver but the same problem happens. It just randomly turns blue when im browsing or playing games. it doesnt happen if i let the laptop just sit there.
View 5 Replies View RelatedTrying to restore my system but when I attempt to see the restore points Vista tells me the wizard is already running the this program will close.
View 9 Replies View Relatedjust god a new top-end audio interface and using cubase 4. I'm not sure which is causing the blue sceen. I've tried looking in the event viewer and can't see any details about the system failure. write debugging info is set to minidump. is there some other way to check the crash info in a log? or what are the best settings for "startup and recovery"
View 5 Replies View RelatedI run vista 32 bit. I'm pretty sure it's Vista personal (PC didn't actually come with a Vista disk). I only use it for music and games,basic stuff. It's a Compaq....It shat itself recently, it wouldn't boot, so i borrowed the Vista Business disk from my dad to repair it/disk boot, and it worked fine, that was a couple days ago. Today it happened again, except it won't repair the same way. I start it up, it goes to the Compaq startup screen with 4 options; [Esc] Boot menu, [F9] Diagnostics, [F10] Setup, [F11] System recovery. Except I can never go to the diagnostics or system recovery menus, i press the keys and nothing happens. Then when i don't press anything it goes to a black screen with "Disk boot failure, insert system disk and press enter", so i do. Then it says "Windows is loading files" with a white bar below, once that's done it goes to the Microsoft Coporation green load bar that scrolls across over and over. Then it suddenly stops for a few minutes and a blue screen appears saying
"A problem has been detected and Windows has shut down to prevent damage to your computer DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps: Check to see if any new hardware or software is properly installed. If this is a new installation ask your hardware or software manufacturer for any windows updates you might need. If problems continue disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to disable or remove coponents, restart your computer, press F8 to select advanced startup options, then select safe mode. (pressing F8 does nothing for me) TECHNICAL INFORMATION *** STOP: 0x000000D1 (0x00000000, 0x00000002, 0x00000000, 0x87995395) *** nvstor.sys - Adress 87995395 base at 87991000, Datestamp 46671a61".....
One day my laptop was open and someone came in and SLAMMED the cover closed, and that messed something up. It will not start up correctly, if my computer is off, and then turned on, this is what happens: It starts successfully to the screen where you have to enter the boot password, after you enter the boot password, the following message just keeps being displayed: Quote: For Realtek RTL8111B/8111C gigabit Ethernet Controller v2.06 (070425) PXE-E61: Media test failure, check cable PXE-M0F: Exiting PXE ROM. Operating System not found.
Intel UNDI, PXE-2.1 (build 082) Copyright (C) 1997-2000 Intel Corporation It just keeps showing that over and over. I have a "Microsoft Windows Vista Home Premium 32-Bit Operating System Disk" which says "Use this disk to re-install your operating system". If I use this disk will it completely wipe all my old files?
I remember with WinXP that if I had my computer turned on and was not using it for a certain length of time (maybe 30 minutes), it would 'automatically' create a 'System Checkpoint' in the System Restore area. I could also 'manually' create a 'System Checkpoint.' What I would like to know is - doees Vista (Home Premium) create such an 'automatic' System Checkpoint if I have notebook turned on, but don't use if for about 30 minutes?
(I believe there is a way to turn on an Automatic 'System Checkpoint' that you can schedule to be done at a certain time. That is not what I am talking about. I am talking about an 'automatic' System Checkpoint' that is done if the computer is turned on, but not used for 30 minutes or more (approximately).
Every time I try to run System Restore I get an error message saying that the restore was unsuccessful because of an error. Try again with a different date
View 9 Replies View RelatedIt seems no posible to restore the system from previous "restore points" with Vista Bussines. I always get the message "System restore did not complete succesfully. Details: The writer experienced a transient error (0x800423F3)."
View 7 Replies View RelatedDaughters laptop was reporting that the HDD was about to fail, should backup and repair.
The concensus of opinion suggested a new HDD was the answer.
Have done that and created the restore disks from the original HDD.
Started the restore and went ok until nearly at the end of formatting the new HDD when I got the message
"error if it happens again contact HP" it did not happen again and appeared to restore files ok, did a verify and no errors.
Trying to boot from the HDD it now fails. Errors report registry incorrect plus others.
Cannot load my Vista version as is 64bit.
I cannot obviously send the errors to MS as the thing will not boot.
Any solutions obvious apart from getting a disk containing Vista 32 bit system
Laptop is an HP Presario running Vista HOme Premium 32.
Is there any utility built into Vista or XP to allow one to create a complete system restore DVD?
View 9 Replies View RelatedI have not been able to resolve my sound and messenger problems that occured after an update. However, when I go to system restore, it only goes back 5 days and I need it to go back 6. Is there any way to restore to a point previous to the points they offer?
View 4 Replies View RelatedF11 system restore. No luck. safemode nothing...seems like it tries to start then hear the hd grind for 10 seconds or so then black screen.
View 8 Replies View RelatedMy problem is I can't get the "System Restore" to work. Every time I set it to do a system restore, it appears to go through all the right motions. Then after it shuts down and restarts itself, I get an error message: "System restore did not complete successfully. "An unspecified error occurred during system restore." It goes on to say that the computers settings have not changed. What's going on? I've tried several different checkpoints including one that I had manually set myself. None of them work, I always get the same error message.
View 7 Replies View RelatedI wanted to give my views with regards getting rid of System Restore points when dealing with spy/malware/virus. Through being around forums and newsgroups for a few years it's my belief that it's best to leave whatever System Restore points you have until you have got rid of any virus's you may have. I know it's more than likely that the virus will end up in a Restore point but it is harmless while in there if you don't Restore to that point and if while you are dealing with the virus and going through steps to rid yourself of it you happen to screw up your machine at least you'll have a System Restore point to get you back into a working system, even if it has a virus, you can then try again. When you have a clean machine then you go in and turn off System Restore to get rid of all checkpoints and then go straight back in and turn it back on and make a manual Restore point while there.
View 6 Replies View RelatedMy friend began to have problems with his sound running vista ultimate and for whatever reason he decided to run a system restore to see if it rectified the problem. Unfortunately now the GUI doesn't seem to be loading properly, the windows splash screen with the animated bar appears then when it should switch to desktop he gets a blank screen with a mouse cursor... Nothing else happens. He's left it all day to see if it was just being really slow but no change.
View 5 Replies View Related
