install a fresh install over my old copy of vista and now I need to restore everything from the old one. got most everything except when i try to restore program files x86 it says access denied?
View 6 Replies
I have Windows Vista Ultimate x64, and it came with 2 set of program files: program files, and program files x86. Since my hard drive is only 100 gigs, I was wondering if I could delete the normal program files and keep the x86 ones, or would that cause problems?
View 3 Replies View Relatedis it normal for me to have 2 Program files?
One has (x86) next to it. ( I assume for the 32bit apps?!?! maybe)
i installed ultimate 64 bit on my dell 1720. it originally came with like home premium 32 bit. why does it have a program files and program files (x86) folder? i just didn't know why it had both and what this means or doesn't mean.
View 4 Replies View RelatedI am fairly new to Vista, all of a sudden today I have lost my file and edit at the top of my page, so |I am unable to copy and paste. I am in Classic mode. Any help to restore this so I can have File and edit at the top of the page would be wondeful.
View 9 Replies View RelatedI'm running Home Premium n an HP laptop and up until yesterday everything was just fine. I also have SP1 and that went well. Yesterday, the system kept freezing or operating extremely slow and for the life of me I had no clue of what was going on. I had to press and hold the power button to shut down so I could reboot. I could not open Control Panel at all - the hour glass just kept swirling but nothing else would happen. After the reboot the system displayed the same behavior and at this point I noticed that it wasn't really locked up but in fact operating so slow that it appeared that way.
After no luck with the obvious I checked the startup group - nothing there, I cleared out the temp folders and files which seemed to help. I decided to simply use a system restore to a previous state of a few days ago. The first time I did this, I got a message that Windows was NOT successful with the restore. I tried an earlier restore point and got the same notification that the restore was NOT successful but it appeared that it was. A program I installed after that particular restore point was gone and the system seemed to be better -
When I try to open any file with the *.exe file, the 'Open With' window is displayed, I suspect I have a virus but can't use my antivirus and cannot use System Restore.
View 2 Replies View RelatedIs it best to make a root folder to the C: drive for Games and not load games into the program files or X86 files?
View 9 Replies View Relatedi accidentally changed something to make my program files open in windows media player. when i double click on a program from my desktop, windows media player comes up and gives me the "windows cannot play this file" message.
View 8 Replies View RelatedI did a search for "x86" on these forums and did not find anything. So, I'd like to ask a few quick question to Brink or anyone else that might know.
This is my first computer with a 64-bit OS (Vista Home Premium). I noticed that there are two separate "Program Files" directories off of root C:
a "Program Files" directory a "Program Files (x86)" directory Is there a difference between the two directories that we should know about?
Also, I've been installing programs to "Program Files (x86)." The programs I've been installing are not necessary 64-bit programs. Should I be installing programs to the "Program Files" directory, instead?
I have Vista Ultimate, I have x64 installed at the present time. I noticed under C: it lists two program files folders, one just plain Program Files (which I presume is the x64 bit folder) one Program Files x86 (which is what it says I presume) The x86 folder is 1.55 gig and the other Program Files Folder (Which I asume is x64) is only 900 MGB. So does that tell me that most of what is on my pc is still X86, running in compatability mode? I usually run Vista Ultimate 32 bit, but just had to try this and see if it would run on my home built pc.
View 7 Replies View RelatedHi, I am going crazy trying to find a program that will open .doc files without any success. I did download a program, cant remember the name but it only allowed me to view all documents and I want to be able to amend them too.
View 4 Replies View RelatedXP was simple. Your executables were installed under C:Program Files documents associated with executables were under C:...\Applications... What I am asking has probably *already* been documented. All I need is for somebody to point to it.
View 9 Replies View Relatedi accidently deleted my program files, because first i had vista x86 then i got vista x64. i installed both on the same hardisk. So there were two program files folders 1)program files, 2)program files(x86). in confusion i delt no. 1. so any way of getting those programs back from vista cdo or any othere source.
View 9 Replies View RelatedI recently had to reformat my computer, but saved basically all of my old computer in the folder windows.old before doing so. Now that I wiped my drive and reinstalled vista, I want to get rid of that windows.old folder because it is huge and I don't use it anymore, but I can't get clearance to delete or move it to an external hard drive.
View 9 Replies View RelatedI have a serious problem to fix. I've written a WIndows Application using visual studio 2008 that uses an Access database to hold data. I've placed the database in the same folder as the executible "C:Program FilesMyAppMyData.mdb". The program installs and work fine under XP and but when installed and run under Vista, I'm getting file permission errors. All user installation and running of the application is done as the ADMINISTATOR, the only user profile created.
My eariler version of the application, written with VS 2005 installs (DOT NET Framework 2.0) and works fine under Vista. I can't change the database location, as eariler versions of this same program have been running and working fine under XP. It would mean changing the data file location for over 200 customers. It would cause a great deal of head aches to modify the application to use a different
folder for the database.
SO here's my questions. What permissions do I need to get read/write access to my data file? What steps can be taken to remove the security attributes on my data file? Can I change these permissions from within my application? The application exe file does have its compatibilities property set to "Run as an administrator". Do I have to run the application under compatibility mode of "Windows XP (Service pack 2)"?
I try to run it in RUN, but give's me an error! What shoul i do?
View 8 Replies View RelatedI installed a program but it does not apear in the programs and features list while it is working well. I decided to uninstall it but I could not do this because it does not apear in the programs and features list so I tried to delete its folder from C:Program Files but I could not so then I turned my computer in the safe mode and I could delete its folder. Then the problems start to begin: the security center can not see the installed antivirus, when I try to uninstall or install the programs I get: (access is denied contact the administrator) although I am an administrator. Even i could not rename my folders in the C hard disk. also when I try to open system restore I get (There was unexpected error: class not registerd 0x80040154). I do not know if it is virus or a mistake I made by deleting that program.
View 9 Replies View RelatedMy computer: Windows Vista Home Premium SP2 AMD 64bit. I am aware of the two folder for program files, but this scrn shot(attachment) will explain it more.. My "Program Files (x86)" folder is not showing up in my C drive list, it is still there, but not appearing any ideas? I think other folders are not showing as well..
View 9 Replies View RelatedIll try not to look to dumb here, but I just installed Vista Home Prem 64 about a week ago and I have a question. There seems to be two Program Files to install applications into, Program Files and Program Files (x86). I know the x86 refers to 32 bit OS. So why do all my applications want to default install into the x86 Program Files? Is there a difference in installing into either one of them? Could it cause issues that anyone knows of? Should I uninstall out of my x86 and reinstalled my application into the non-x86 Program Files?
View 9 Replies View RelatedI have now found out about the search you can do with Windows key + F, but I was wondering where that program is that the shortcut starts. Is it possible to make another shortcut that would just be on the desktop to the same search program, so you would only need to click on the shortcut on the desktop?
Also, is it possible to set a default so the search program would also search the non-indexed files, instead of going to the advanced screen and having to check the box? Or does Vista want to require you to have indexing on for every drive?
Court hearings are recorded in .wav files we can get copies of on CDs. But we can't find a program that plays them. The whole codec thing is over my head and more trouble than I want to deal with. Is it a Vista thing? Are wav files no longer compatible? The old recorder program used to record and play them. I can't find anything that simple anymore.
View 7 Replies View RelatedI'm logged in on an administrator account, yet I can't access the folder C:Program Files (x86)Everest Pokerhistory. I get the windows message "C:Program Files (x86)EverestPokerhistory is not accessible. Access is denied."" I've tried "Taking Ownership" of the folder using a registry tool i found on google, to no avail. I've been told that I can solve the issue by turning off UAC, but I'd rather not compromise security if I don't have to.
View 6 Replies View Relatedi couldn't open a program so i chose "Open as" and didn't realize i had "always use this program for all files" and now nothing at all will open except my browser and everything is saved as a .EXE file i have windows vista. Also whenever i try and download something it saves as a .EXE Im not too tecky so bit by bit instructions would be nice
View 4 Replies View Relateddoes anyone know of a program that will allow me to view excel files without having to install the full version of office/excel?
View 4 Replies View RelatedIn my 'program files' folder I see subfolders with names I don't recognise, do not appear under 'control panel - uninstall a program', nor on the start button 'all programs' option. Is it safe to delete them ?
View 9 Replies View RelatedWhen I go into the C: Drive.. it shows program files.. and then it also shows a Program Files (x86) folder.. why do I have both, and one is 32 bit. Whats it for, what should I use it for. or do the things you try and install that are 32 bit go in there, and the others go in the normal file?? Please let me kno what the deal is with that.
One last question, I just got a new system built.. and now I wanna take the HD from my old system, add it to my new one.. and move everything over, is it just that simple. plug it in.. let my computer see it. open and drag everything. or is there ways to do it. Like I don't wanna just drag everything or I'd have 2 of everything. and it would take forever to do it all folder at a time. So what should I do. Open my Music and drag it all into My music new system. so the folder stays and stuff inside get transfered. or what?
whats the best way to just get all my programs, and all my files over..Should I transfer over all the install files.. or should I redownload and reinstall all the stuff I need online.. to make sure i get 64 bit ones if available..?? Let me kno please!! I'm going to do it tonight.
I've been told in this forum that appls must be reinstalled into Program Files,not simply copied from a Backup.Yet some of the copied appls (WinMX,WinAmp,Audacity, etc)run fine.Others won't.What determines the correct prodedure?
View 4 Replies View RelatedThis all started when I recently had some malwares/viruses roaming around my laptop one day. I had managed to get rid of it all but it left my Direct Console 2.0 useless (I have an ASUS G-50V, Vista Premium 64-bit). I've tried reinstalling it and it just wouldn't load, no error message or anything (it did show up on taskmanager but no window appeared).
So trying to find a solution on google I ended up installing .net Framework 4.0. However, after restarting i started getting a ton of error messages about files in the Program Files folder, and then I realized it had just completely disappeared (rather, all the files inside disappeared). First the error messages said the folder was "corrupt and unreadable."
I navigated to the folder and tried clicking it, which then another error message popped up saying "Access is denied." I tried almost every solution I found on google, changing ownership and such, but I still cannot open the folder. Moreover, I cannot repair or uninstall any program that is or has been in the Program Files which I'm assuming has to do with the permission issues. I noticed this when I ran the setup for Direct Console 2.0 and tried to repair it, only giving me an error saying "The Installer has insufficient privileges to modify this file: C:Program Files (x86)ASUSOvClk.dll." But this also makes no sense to me as this is the x86 program files folder, which I can access.
I checked both of the folders and TrustedInstaller has ownership to both of them.
*Edit - I just checked the ASUS folder inside my Program Files (x86) where the only group assigned to it for security is "Everyone" and it had no access whatsoever.
I would like to know if there is any possible way to fix this and if the files inside the folder are still there as this is very frustrating to deal with. Most of my ASUS programs were in the Program Files, including the hotkey manager is really useful to me. Thanks a lot.
In case you need to know:
As for the what I did to deal with malwares and viruses I mentioned before, I did install Malwarebytes on another computer with updated definitions and loaded it on a flash drive here, removing whatever malwares it found. Even after this though (and this has been a consistent problem), mbam.exe would disappear after installing Malwarebytes regularly on my own laptop.
Thinking there was some virus or other malware laying around that it didn't pick up, I downloaded and installed AVG. I updated it and full scanned, which found more viruses and did fix the issue of mbam.exe disappearing after install. At this point I installed Malwarebytes again, updated, and scanned again, finding 1 or 2 trojans and I think at this point there shouldn't be any viruses/malwares causing issues, but of course I could be wrong.
i am using vista ultimate 64 bit os with fingerprint biometric security can anyone tell me which program is supposed to open folders to browse files as i recently tried to browse some files using media centre and now if i try to open the files it automatically uses media centre to open them ,which doest work? i can unlock the files and lock them but not browse them as i dont know which program it uses to open the files
View 4 Replies View RelatedWhen given the choice during software installation, what's the difference between installing to "Program Files" and "Program File (x86)"?
View 4 Replies View Related
