Whenever I sync my newsgroups with Win Mail, I get a number next to the ng, i.e.. microsoft.public.pocketpc (6) even though I have used the "catch-up" function then delete but that still shows up. Is there a file in appdata that I can delete to get rid of it?
View 6 RepliesMade the mistake of creating a User Account, "the Smiths," and then later changing User Name to "Ed" with password on older computer running XP. Would now like that account to be "Ed" to be consistent with another computer running Vista on my LAN. Is the correct way to make this change (1) change the User Name of "the Smiths" from "Ed" to say "Smith" as a temporary expedient, (2) create a new User Account name "Ed," which will generate the necessary file structure under Documents and Settings along with its User Name of "Ed", (3) copy files from Documents and Setting he Smiths to Documents and SettingEd and (4) delete the User Account "the Smiths"? My biggest concern is the copying of files - most of which I do not understand their value/purpose?
View 9 Replies View RelatedThis may not matter but it is regarding a 64-bit system.When the new computer was originally set up, it was not networked and there was no reason for a user name with password. Now the computer is part of a network so it was necessary to have a password. Additionally, the user's name had a typo error.We attempted to correct the spelling of the user name and add a password but the results were not as anticipated.Going into Control Panel/Users, the old incorrect name does not appear.In Windows Explorer, immediately under Desktop, the old user name does appear and the subfolders under that user name cannot be accessed.Under c:/Users, the new correct user name appears and those files are fully accessible.We would like to fully delete the incorrect user name and the associated folders that cannot be accessed anyway. However, I am concerned because on other Vista computers the user name always appears both under Desktop and under Users. I am also worried about deleting other folders under the incorrect user name for fear that the computer may need these even though we did not create them. how to delete these unwanted items and confirm what subfolders we can safely delete.
View 4 Replies View RelatedI have tried on two pcs (I only have vista pcs now) with two different user accounts but with no success the posts have never been downloaded or displayed or deleted, they just dont exist as far as mail is concerned I have downloaded thunderbird and the messages appear as they should. I dont like thunderbird, I find it difficult and unintuitive, but at least it works
View 9 Replies View RelatedIf you see rantings from this retard, please ignore them. He's been posting ten or more infantile posts every day on here for months. Replies just fuel him to post more idiotic rubbish. Ignore the fool, he'll get bored and go away. The old a age applies here, DON'T FEED THE TROLL!!
View 5 Replies View RelatedI have a Windows Live Mail account and a Yahoo account and they both show up on the left hand side of my Window Live Mail account so I can choose which account I want to use or, for example, which inbox to look in. At the bottom, also on the left hand side of my Windows Live Mail account, it shows 'Add e-mail account', which is what I want to do with a new 'AOL' account and I want it to show on the left hand side like the two other accounts.
So I made a new AOL e-mail account, clicked 'Add e-mail account' at the bottom of my 'Windows Live Account', then I put in my new AOL e-mail account and password where it showed me. Then I clicked next.
The next page was all about my email server. When I did this before with a new e-mail account, it was all filled out automatically for me, but this time, all the blanks were left open and I have no idea what to fill in. I believe once I have this information, the AOL e-mail account will automatically then show on the left hand pane of my Windows Live Mail account below the other two accounts.
Why is my posts being deleted from this server.? Reply to Newsgroup for the benefit of others Requests for assistance by email can not and will not be acknowledged.
View 9 Replies View RelatedIs there a way to get new post just from a particular forum? Say, if I wanted to only see the new posts in Tutorials or Software or whatever?
View 8 Replies View RelatedThis is something that has happened recently. If I try to post all I see is the reply (eg "Re: .......) and not my original post. Don't know why Vista Mail has started doing this.
View 5 Replies View RelatedI subscribe to two news servers in Windows Mail - one the MS News server and one a non-MS news server. The MS News server exhibits certain weird behaviour in that several groups constantly list a small number of messages not downloaded, no matter what I do, whether I mark all read, or use the catch-up function, or Get the next 300 headers. Also the "Show Replies to my posts" function goes awry - if I set the view to that, it works on the first group I set it on, but if I go down through the group list, without changing the View from that, WM does NOT display replies to my posts, I have to uncheck it and re-check it for each group.
View 4 Replies View RelatedUsing Windows Mail which was working fine this morning. Installed the recommended MS updates this afternoon, WM started running very slowly (taking 3-5 seconds to change message when clicked) now every e-mail and newsgroup message shows name and subject, but the content is completely blank. I can open them up, and the content is stored as an attachment, eg AT000223.html AT000223.txt, which I then have to save (if I click either attachment, I get "file not found" error), then I can open it up and read the mail. I have read and tried the fixes where I changed the "read messages in plain text" option, and the encoding options, still the same. I've done the maintenance on the folders, I've also emptied the temporary Internet files as a forum, still nothing.
View 4 Replies View RelatedI subscribed to several newsgroups and retrieved the posts locally. It seems Windows Mail onlly retrieves part of the newsgroup posts. I cannot seem to find where I may configure to make it display all the posts which I can see via Web page. For example, I cannot see posts earlier than August, 2008.
View 4 Replies View RelatedI have extraneous sounds left over from viewing a Web page video. I have
done all the anti-virus/Spybot/reset Internet Explorer tricks that I can
think of.
Brand new Dell came with Vista. Ignore it? Or anyone have hints for fixing
the sound card?
I have a machine with Vista 64-bit ultimate edition. I'm running raid 1+0, and started having a drive fail. Instead of just replacing that single drive, I figured I'd use this time to upgrade to larger drives.
I did a ghost image of all 4 partitions, swapped the drives out, rebooted with the ghost boot cd, and reloaded. It copied all the data to all partitions, but it won't boot.
I did have a boot helper installed - I think it may be EasyBCD - to help go between windows XP pro and Vista.
Anyway, when Ghost finished and I rebooted, I get the No OS found. I was thinking the boot partition may be messed up, but I'm not sure how to fix this.
I don't think I want to try a Vista repair from the boot DVD, but maybe that is what I have to do.
I'm new to this forum so please be gentle if I made a mistake in posting this here or whatever. :-) I am a intern on a School for my education and currently I'm looking into Imaging. Yesterday I used Symantec Ghost to image a XP machine. I was wondering if this would also be possible with Vista. Using something like a bootable Vista usb drive or cd or something?
View 6 Replies View RelatedI went to perform a Norton Ghost backup of the Maxtor XP partion, with the destination of the WDC small partition, and ghost got disk errors somewhere, and so i have done chkdsk, crap cleaning and defragmentation to the Maxtor XP partition. when I tried a third ghost sesson, i got a BSOD, and now XP sees the WDC Vista partion as RAW. However, if I flip over to WDC Vista x64 partition and use that as the operating system, everything appears normal and runs normal. so what can i do to have XP see the WDC Vista partition as NOT RAW! (obviously, I can't format or reformat it from XP.) or do i just live with XP missing the Vista partion?
View 7 Replies View RelatedI am wondering if you need to re-install Windows after a hard drive failure before you use a "ghost" image. I used Macrium Reflect to create it.
http://www.macrium.com/blog/2008/03/...umReflect.aspx
Do you install Windows on the new drive or just install the "ghost" image of the drive before it failed?
I am looking for a good easy to use backup program. I now have Norton Ghost and it is hard to use.
View 9 Replies View RelatedThis note it intended to assist those who wish to use either of the subject programs in the same fashion I do. I have extensive experience with Acronis version 10, initial release and build 9042 and version 11 build 8035. Also experienced with Norton Ghost version 10 and version 12. Both products are good. I choose not to use the Acronis products because executing scheduled backup tasks with validation for 4 systems would take about 9 hours and 20 minutes using Acronis TrueImage whereas the same tasks using Norton Ghost would take about 2 hours and 40 minutes.
I back up four systems to an external drive on a regular basis. Each backup is a full image of a system. Each backup is validated. Each system backs up to a different directory on an external drive. I keep 6 backups for each system. All backups are scheduled overnight on the same night. The drive is attached locally to a Vista system and 3 XP systems back up to it's directory via a LAN. The back up time for the 4 systems are about 10 minutes, 20 minutes, 20 minutes and 30 minutes. Validating the backups take roughly the same time as does the backup. These times are about the same for all the products.
The time difference (9 hrs 20 min vs 2 hrs 40 min) is due to what I consider a flaw in the scheduled validation process of the Acronis products. When executing a scheduled backup with validation, the Acronis products validate every backup on the backup location. The first backup of 10 minutes and 6 validations of 10 minutes each takes about 1 hr 10 min. The second backup of 20 minutes and 6 validations takes about 2 hrs and 20 min. The same time needed for the third backup. The 4th backup of 30 min and 6 validations takes about 3 hrs 30 min. A total of about 9 hrs 20 mins.
I have only two optical drives in my system ever since the beginning, but some how there is an additional icon shows up with letter assigned in "computer". Can't get rid of. It doesn't show up in Disk Manager nor Device Manager as shown below.
View 9 Replies View RelatedI know the title doesn't really describe it. I mean, it is like ghosts moving my icons every time i start up. I re-arrange them just the way i want them. When i start my computer up next time, it is always the icons in the same place that skip, and move up a row. I mean, i have two rows of icons on my desktop. exactly. The two icons on the third row up from the bottom always move to the top of the third row. I dont get it. WTF?
View 8 Replies View RelatedI normally work in a straight Windows Vista Business environment on my laptop using Ghost 2003 to image my setup (which occasionally causes problems with the image files but that is another issue) - I was trying to setup a dual boot - XP SP3 and Vista SP1 environment with XP as the primary boot partition installed (20 GB) and the rest of my laptop's HDD for Vista (130 GB approx) I got the dual booting done with BCDedit to fix the Boot Manager but after I ghosted the image (successfully), verified the image (successful) and did a test restoration (successful) - I was unable to boot into XP or Vista - XP would complain at NTLDR and Vista at first about WINLOAD and after repairs with my Vista DVD, would BSOD during boot - what did I do wrong and/or how can I fix it?
View 4 Replies View RelatedI have Norton Ghost 14 and Vista 64 Ultimate. I don't see any reason to use Ghost over Windows Backup. Both take about 2 hours to backup my hard drive.
View 9 Replies View RelatedAs I bought the product today and when I put the disk in the drive and ran the installer, it all seemed to go well and I then rebooted the computer with the disk still in the drive. On the reboot the computer hung up and stayed on a Black screen, I then did a Reset of my computer and when it rebooted I got a Blue screen with an error message - System_Service_Exception. The computer rebooted and I removed the disk, and then I got another Blue screen about Bad_Pool_Header.
Finally I had to restart my computer with my Vista disk in place, so that I could un-install Norton Ghost 14. I managed to do this and I then did a System Restore to get my computer back to a decent state so I could use it. I have had a search around on the Symantec website, and I cannot find anything to help me with this problem. And how I can install Norton Ghost 14 on my computer, and if I have to disable anything for the installation?
I have Vista x64 with 8GB DDR 2 ram, 2x8800GTX cards, 4 hard drives (2x500gb, 1x150gb and 1 raptor 32gb OS). I back up daily, and yesterday encountered a problem requiring a restore. Since System Restore is useless as it didnt save my "create a restore point" I decided to go ahead with my daily Ghost backup (v12.0 used). Hell broke loose. Ghost's always worked fine under XP but Im writing this article for any suggestions on X64 (if its even the problem). You see, when booting from the Ghost CD, what usually happens are one of 2 things:
1) The Symantec page wont even load, the PC will give a BSOD error message until I remove all but 2GB RAM, then Symantec loads etc
2) When RAM removed, Symantec loads, finds the restore point, restores the drive. Then with around 20 seconds to go I get a BSOD (same one as before). Try booting the PC and for a split second you get the BSOD and it restarts.
If you try loading the CD again, you get the BSOD. The only way to get around the BSOD (and to start the whole process again) is to PHYSICALLY remove the hard drive you reinstalled on, format it with a different computer, plug it back in and start over. This was mental! I restored onto a (newly purchased) Raptor drive. No idea what the problem is. Does anyone recommend any new software to backup a whole PC (quickly) and possibly retore itself within Windows, or ways around the problems above?
I have had problems connecting to the internet using Vista ultimate, so I did a clean install with SP1 and installed norton ghost V12 so I could make a backup of the clean install , I can connect to my ISP but cannot go any further, there is no animation of the internet icon in the taskbar even though it is turned (animation) on , the diagnostic link could not give any answers, and when the internet icon in the taskbar is right clicked and open the network settings (bottom of the list) it shows My ISP to my Computer OK but from my computer to the internet is a large X which means I cannot get out to the web..
View 6 Replies View RelatedI just got a new HP Vista Home Premium computer. My old XP Media Center computer with all my programs and files - I don't have that many pictures and no movies etc. - held about 25GB of stuff (both Defraggler and Norton Ghost indicated that 25GB was the size of the entire contents of the C: drive).
My Vista Home Premium computer, with all my programs and applications transferred over from the XP machine, has drive contents of a whopping 100GB(!) according to Defraggler. However, the Norton Ghost backup file of the C: drive is under 25GB in size. Both the XP and the Vista computer are on NTFS file systems. What can be bloating up this new Vista machine? I've looked around with Power Desk Pro 7 and don't see much. DeCrapifier doesn't identify anything obvious.
When I am reading posts in this and some other discussion groups, there are frequent posts from someone called "Unknown". When I click on the post, it is blank, no message. Sometimes I see that others have replied to such posts and I can open the replies, which are not blank. Could some kind person explain to me what is happening? Have the original messages been pulled by some hidden moderator?
View 6 Replies View RelatedI use a admin account on my computer but when I added standard user account it will not open some web pages for example when I go to my yahoo mail it will show the email but when I click on it, it will not show any text, but when I use the administrator account the web page works fine, I can see and read all emails. Another example is when I go to ask.com and search under the standard user it comes up as a blank page but will show search results under the administrator account. I have windows vista home and 7.0 explorer.
View 5 Replies View RelatedIf I remove a windows mail account will I lose all of the email in the account?
View 5 Replies View RelatedMy email account and online bank account was recently hacked so I'm absolutely freaked out and I'm terrified of using the internet to buy things/book holidays. I am running Vista home premium and my AV is Kaspersky 8.0.0.357 (which has obviously failed to do its job). This is my Hijack this log file:is v2.0.2
Scan saved at 7:13:41 PM, on 24/1/2010
Platform: Windows Vista SP2 (WinNT 6.00.1906)
MSIE: Internet Explorer v8.00 (8.00.6001.18865)
Boot mode: Normal
Running processes:
C:Windowssystem32Dwm.exe
C:Windowssystem32 askeng.exe
C:WindowsExplorer.EXE.......