I have extraneous sounds left over from viewing a Web page video. I have
done all the anti-virus/Spybot/reset Internet Explorer tricks that I can
think of.
Brand new Dell came with Vista. Ignore it? Or anyone have hints for fixing
the sound card?
I have a machine with Vista 64-bit ultimate edition. I'm running raid 1+0, and started having a drive fail. Instead of just replacing that single drive, I figured I'd use this time to upgrade to larger drives.
I did a ghost image of all 4 partitions, swapped the drives out, rebooted with the ghost boot cd, and reloaded. It copied all the data to all partitions, but it won't boot.
I did have a boot helper installed - I think it may be EasyBCD - to help go between windows XP pro and Vista.
Anyway, when Ghost finished and I rebooted, I get the No OS found. I was thinking the boot partition may be messed up, but I'm not sure how to fix this.
I don't think I want to try a Vista repair from the boot DVD, but maybe that is what I have to do.
I'm new to this forum so please be gentle if I made a mistake in posting this here or whatever. :-) I am a intern on a School for my education and currently I'm looking into Imaging. Yesterday I used Symantec Ghost to image a XP machine. I was wondering if this would also be possible with Vista. Using something like a bootable Vista usb drive or cd or something?
View 6 Replies View RelatedI went to perform a Norton Ghost backup of the Maxtor XP partion, with the destination of the WDC small partition, and ghost got disk errors somewhere, and so i have done chkdsk, crap cleaning and defragmentation to the Maxtor XP partition. when I tried a third ghost sesson, i got a BSOD, and now XP sees the WDC Vista partion as RAW. However, if I flip over to WDC Vista x64 partition and use that as the operating system, everything appears normal and runs normal. so what can i do to have XP see the WDC Vista partition as NOT RAW! (obviously, I can't format or reformat it from XP.) or do i just live with XP missing the Vista partion?
View 7 Replies View RelatedI am wondering if you need to re-install Windows after a hard drive failure before you use a "ghost" image. I used Macrium Reflect to create it.
http://www.macrium.com/blog/2008/03/...umReflect.aspx
Do you install Windows on the new drive or just install the "ghost" image of the drive before it failed?
I am looking for a good easy to use backup program. I now have Norton Ghost and it is hard to use.
View 9 Replies View RelatedThis note it intended to assist those who wish to use either of the subject programs in the same fashion I do. I have extensive experience with Acronis version 10, initial release and build 9042 and version 11 build 8035. Also experienced with Norton Ghost version 10 and version 12. Both products are good. I choose not to use the Acronis products because executing scheduled backup tasks with validation for 4 systems would take about 9 hours and 20 minutes using Acronis TrueImage whereas the same tasks using Norton Ghost would take about 2 hours and 40 minutes.
I back up four systems to an external drive on a regular basis. Each backup is a full image of a system. Each backup is validated. Each system backs up to a different directory on an external drive. I keep 6 backups for each system. All backups are scheduled overnight on the same night. The drive is attached locally to a Vista system and 3 XP systems back up to it's directory via a LAN. The back up time for the 4 systems are about 10 minutes, 20 minutes, 20 minutes and 30 minutes. Validating the backups take roughly the same time as does the backup. These times are about the same for all the products.
The time difference (9 hrs 20 min vs 2 hrs 40 min) is due to what I consider a flaw in the scheduled validation process of the Acronis products. When executing a scheduled backup with validation, the Acronis products validate every backup on the backup location. The first backup of 10 minutes and 6 validations of 10 minutes each takes about 1 hr 10 min. The second backup of 20 minutes and 6 validations takes about 2 hrs and 20 min. The same time needed for the third backup. The 4th backup of 30 min and 6 validations takes about 3 hrs 30 min. A total of about 9 hrs 20 mins.
I have only two optical drives in my system ever since the beginning, but some how there is an additional icon shows up with letter assigned in "computer". Can't get rid of. It doesn't show up in Disk Manager nor Device Manager as shown below.
View 9 Replies View RelatedWhenever I sync my newsgroups with Win Mail, I get a number next to the ng, i.e.. microsoft.public.pocketpc (6) even though I have used the "catch-up" function then delete but that still shows up. Is there a file in appdata that I can delete to get rid of it?
View 6 Replies View RelatedI know the title doesn't really describe it. I mean, it is like ghosts moving my icons every time i start up. I re-arrange them just the way i want them. When i start my computer up next time, it is always the icons in the same place that skip, and move up a row. I mean, i have two rows of icons on my desktop. exactly. The two icons on the third row up from the bottom always move to the top of the third row. I dont get it. WTF?
View 8 Replies View RelatedI normally work in a straight Windows Vista Business environment on my laptop using Ghost 2003 to image my setup (which occasionally causes problems with the image files but that is another issue) - I was trying to setup a dual boot - XP SP3 and Vista SP1 environment with XP as the primary boot partition installed (20 GB) and the rest of my laptop's HDD for Vista (130 GB approx) I got the dual booting done with BCDedit to fix the Boot Manager but after I ghosted the image (successfully), verified the image (successful) and did a test restoration (successful) - I was unable to boot into XP or Vista - XP would complain at NTLDR and Vista at first about WINLOAD and after repairs with my Vista DVD, would BSOD during boot - what did I do wrong and/or how can I fix it?
View 4 Replies View RelatedThe sound failed a while back for no apparent reason, no new hardware, possibly new software. I installed a pci sound card it worked fine. I just installed a pctv card in the slot my sound occupied. I have tv and no sound. I have updated realtec drivers, the device manager says it's working properly, when I open the audio manager it says its sending sound to the speakers.
View 4 Replies View Relatedhere's no (and there was no) audible sound for taskbar notifications (balloons). E.g-in windows update (i set it only to inform me, not download). there is a balloon notification but no sound. sound options are all enable and working other sounds appear i Can hear them. Windows- Balloon.wav" correctly associated with System Notification- and sound test is working. changing between sound schemes also does not help...In XP baloon notif. sound is working but not in my vista...Maybe i'ts vista default behavior?
View 9 Replies View RelatedI have Norton Ghost 14 and Vista 64 Ultimate. I don't see any reason to use Ghost over Windows Backup. Both take about 2 hours to backup my hard drive.
View 9 Replies View RelatedAs I bought the product today and when I put the disk in the drive and ran the installer, it all seemed to go well and I then rebooted the computer with the disk still in the drive. On the reboot the computer hung up and stayed on a Black screen, I then did a Reset of my computer and when it rebooted I got a Blue screen with an error message - System_Service_Exception. The computer rebooted and I removed the disk, and then I got another Blue screen about Bad_Pool_Header.
Finally I had to restart my computer with my Vista disk in place, so that I could un-install Norton Ghost 14. I managed to do this and I then did a System Restore to get my computer back to a decent state so I could use it. I have had a search around on the Symantec website, and I cannot find anything to help me with this problem. And how I can install Norton Ghost 14 on my computer, and if I have to disable anything for the installation?
Windows Vista Home Premium. IE7. Office 2007
Peculiar sounds annoy me so I have set 'Sounds' to virtually nil using Control Panel/Sounds and disabling all the Windows boings and beeps and saved the setting as "My own".
However, I keep getting the odd boing, burp and beep, such as when closing a programme after pasting something and closing E7.
Is there somewhere else I should look to stop these irritants?
Does anybody know if there is a free software program, that makes a sound whenever you are typing in windows vista? I just like the typewriter sound, and miss it?
View 5 Replies View RelatedI have Vista x64 with 8GB DDR 2 ram, 2x8800GTX cards, 4 hard drives (2x500gb, 1x150gb and 1 raptor 32gb OS). I back up daily, and yesterday encountered a problem requiring a restore. Since System Restore is useless as it didnt save my "create a restore point" I decided to go ahead with my daily Ghost backup (v12.0 used). Hell broke loose. Ghost's always worked fine under XP but Im writing this article for any suggestions on X64 (if its even the problem). You see, when booting from the Ghost CD, what usually happens are one of 2 things:
1) The Symantec page wont even load, the PC will give a BSOD error message until I remove all but 2GB RAM, then Symantec loads etc
2) When RAM removed, Symantec loads, finds the restore point, restores the drive. Then with around 20 seconds to go I get a BSOD (same one as before). Try booting the PC and for a split second you get the BSOD and it restarts.
If you try loading the CD again, you get the BSOD. The only way to get around the BSOD (and to start the whole process again) is to PHYSICALLY remove the hard drive you reinstalled on, format it with a different computer, plug it back in and start over. This was mental! I restored onto a (newly purchased) Raptor drive. No idea what the problem is. Does anyone recommend any new software to backup a whole PC (quickly) and possibly retore itself within Windows, or ways around the problems above?
I have had problems connecting to the internet using Vista ultimate, so I did a clean install with SP1 and installed norton ghost V12 so I could make a backup of the clean install , I can connect to my ISP but cannot go any further, there is no animation of the internet icon in the taskbar even though it is turned (animation) on , the diagnostic link could not give any answers, and when the internet icon in the taskbar is right clicked and open the network settings (bottom of the list) it shows My ISP to my Computer OK but from my computer to the internet is a large X which means I cannot get out to the web..
View 6 Replies View RelatedOperating system Vista Home Premium 64. Windows sounds suddenly don't play. All I get is a click but no sound.
View 9 Replies View Relatedthe windows sounds like the startup sound and the asterisks etc are not loud enough even at the max volume. The music and video etc. are loud and fine.but the general windows sounds are too low in volume even at max volume.and it recognizes it too because when i set the volume to max in the corner to next to the clock,the green bar fills only 20% or so when it beeps.
View 6 Replies View RelatedMy mom changed her theme the other day and now there are no sounds for new messaged received, opening and closing windows, logging in or out, emptying recycle bin...etc. I've tried going into sounds and picking new ones, old ones and nothing works. In sounds where you can "test" a certain sound, nothing plays. It's not the speakers cause music plays just fine. I loaded all the windows media files into windows media player and they work so it's not that. How do I get them to play again?
View 6 Replies View RelatedWhen I right click on the sound icon in the system tray, it brings up the sounds associated with Windows (Vista Home Premium) actions. However, when I click on the Play icon, the sounds don't play. WAV files on my computer are associated with the Windows Media Player (although I've tried the other available sound players too and the same thing happens - no sound. My sound card seems to work fine and I have the latest driver. If I go directly to Windows>Media and play the sounds, they PLAY!!! I've set all WAV files to play with Windows Media Player. Sometimes the Windows logo, when booting up, plays a sound - but most of the time it doesn't.
View 5 Replies View RelatedSometime my system sounds work and most of the time they don't. My Device Manager doesn't show any problems. When I right click on the sound icon in the System Tray and click on Sounds, then try the sounds, most of the time they don't work. I have all the latest digitally signed drivers (HP Pavilion laptop). When I go straight to the Sounds folder and try the sounds, they don't work. I don't even know which app is supposed to play these sounds (it might help if I knew in order to solve the problem). I have no viruses or malware in my system. Not sure - but it seems like the system sounds stop working sometime while the system is booted and has been running for a while. Please could someone offer some other things to check or try? What app is supposed to run these sounds? Are there any other sites that might be able to help (or other Newsgroups)? I depend heavily on these sounds working properly so thi sissue is important to me to solve. If I've left out any relative detail,
View 4 Replies View RelatedI just got a new HP Vista Home Premium computer. My old XP Media Center computer with all my programs and files - I don't have that many pictures and no movies etc. - held about 25GB of stuff (both Defraggler and Norton Ghost indicated that 25GB was the size of the entire contents of the C: drive).
My Vista Home Premium computer, with all my programs and applications transferred over from the XP machine, has drive contents of a whopping 100GB(!) according to Defraggler. However, the Norton Ghost backup file of the C: drive is under 25GB in size. Both the XP and the Vista computer are on NTFS file systems. What can be bloating up this new Vista machine? I've looked around with Power Desk Pro 7 and don't see much. DeCrapifier doesn't identify anything obvious.
I just installed the new update for the Ultimate Extra Sounds Schemes. When I have one of these new schemes selected as my sounds, when I shut down or reboot my pc, I see a brief black screen with red text and something about explorer.exe not respoding or something. It happens with either of these new sound schemes Glass, or Pearl. When I put if back to default, problem goes away. Nice extra MSFT!
View 9 Replies View Related3 days ago my computer started making very quiet beeping sounds, it happens mostly when I use Mozilla Firefox and Windows Explorer. My impression is that the sound is coming from the motherboard. When I restarted in safe mode the sound disappeared,
so after a very long elimination process I discovered that when I change control panel-power options-processor power management settings the frequency of beeping changes as well. Until now I was using balanced settings (min processor state 5% and max processor state 100%), if I choose high performance (min and max processor state are both 100%) the beeping becomes very frequent almost continuous, and if I choose power saver settings (min processor state 5% and max processor state 50%) I don't notice the beeping anymore but of course I don't want to keep using only 50% of my processor. I am using a desktop computer, not a laptop. Except for the annoying sound the computer works normally. I have Windows Vista Ultimate 32-bit SP1.
I have been using Office 2007 for about a year, and this morning something changed. Historically, when I would designate a mail item for permanent deletion (by hitting shift and delete at the same time), a dialog box would pop up asking me if I was sure that I wanted that item to be permanently deleted. When the dialog box appeared, a sound was made simultaneously. (I believe that if I clicked yes to the question in the dialog box, another sound was made.) Today, for no apparent reason, there are no sounds made. I opened Control Panel and selected "sounds" to see if Outlook was among the programs listed where certain actions within a program are accentuated with sounds, but i see that Outlook is not listed. I restored the Sounds from "modified default" to "Windows Default" and re-started Outlook, but the sound was not restored. Does anyone know how to restore my sounds?
View 8 Replies View RelatedSo I am goofy and want my Vista Ultimate to play my own wav files instead of the ones it came with. but they simply don't play at all. I have done everything I know how to get this to work. I go to control panel sounds and the sound tab and have put the .wav files i want to use into the C:/Windows/Media folder and am able to select them through the sound menu... but the test option plays nothing for my wavs and it doesnt do anything when the system is supposed to make said sound...
I even checked all the properties to make sure they were the same the only differance I can see is that the sound files that work are owned by the system and the ones that dont are owned by administraitor. I do know how to change the ownership of files through the properties menu but even in Administraitor mode there is no option for system... I do not however think that it is the cause... is it that vista just doesnt want you using your own sound files?
Installed Service Pack 1 for Vista regular edition and now when I play Halo all the sounds have reverb on them. How do I get rid of this?
View 7 Replies View RelatedToday I installed a program that will let you record any sound coming from your speakers. It's a paid program and it's a reputable program but I noticed something after the reboot. Im not sure it's related or not. When I even move my cursor over a icon on my desktop it gives that windows sounds, like a critical beep. When I click on a topic here in the newsgroup to read, same thing. Clicking on contrl panel incons or any incons up there, same noise.
View 8 Replies View Related