I will be installing Vista Busieness 64bit on a system with Vista Home Premium 32bit currently installed. I want to convert the current install into a virtual machine (using VMware converter) so I can fallback to that environment from time to time after I install Vista 64bit. Is there anything I should be aware of? I am not 100% clear if I am actually allowed to migrate this install into a VM with the current license agreement.
View 4 Replies
I have the following issue and hope that somebody can give me a hint about what might be going on! My system has two raid 1 arrays - one is running on XP Professional SP3 the other one is running on Vista x64 Ultimate SP1. When I start my virtual machines (either from the Virtual PC console or when double-clicking the *.vmc files) than everything is working fine on XP and the virtual machines are booting and running as expected. However, on Vista the following is happening (and I hope somebody has an idea):
1. Starting the Virtual machines from the console leads to an immediate reboot of my host machine (I can't even see any boot screen of the virtual machine - it is like clicking start in the VPC console -- > reboot of host).
Now I tried the following:.........
Is there a way to backup Virtual PC 2007 images. In VMWare, its easy enough to copy the image directory and restart on a new computer. Anyone have some simple pointers?
View 7 Replies View RelatedI have installed Virtual Windows XP mode on Windows 7 RC. When trying to load XP programs on the virtual machine, I often get the warning "The Windows Installer does not permit installation from a Remote Desktop Connection"
View 8 Replies View RelatedRunning Vista Ultimate 64-bit on M6400 notebook with 16GB RAM.
With 16GB RAM does Vista really need any virtual memory?
My quad core, 16GB RAM notebook would be faster without hard drive access due to virtual memory.
Can I turm off virtual memory or set it to some very low value (possibly 0)?
My preference is to use the 16GB RAM and should that be insufficient then I decide which programs to close. I don't want Vista using 4GB, or 6GB RAM, etc., and continually writing/reading to HD which slows things down and does not make full use of the physical RAM present.
What's the advantage of using 64bit on my machine instead of 32bit?
View 9 Replies View RelatedHow do you edit a virtual pc hard drive image so that you can add files onto. So that if you have say MS-DOS 7.1 running on virtual pc and want to add SIMCITY 2000 to its virtual hardrive. Then you could run SIMCITY 2000 from dos on windows vista. And once simcity 2000 is added to the virtual hardrive how do I execute SC2000.exe from dos or dos shell.
View 9 Replies View RelatedAm I correct in assuming that, for Windows ME to run in a Virtual PC 2007 window, the Windows ME virtual disk must be located inside a disk partition that is FAT32? On a test run, I tried to install WinME on a virtual disk in a folder that was in my normal Vista partition (NTFS), and it didn't get far. I tried placing the WinME virtual disk inside an FAT32 partition, and although I didn't finish the installation process, I got that far, with the WinME instalation screen having popped up and ready for installation. One other thing: Is it possible to place the WinME virtual disk inside a logical FAT32 partition? Or must it be a primary partition?
View 8 Replies View RelatedIve just changed from 32bit to the 64bit OS, and I have noticed that I have 2 Program Folders one has x86 next to it. I take it that this is for 32bit programs and the other for 64bit applications. The question I have is most of the programs are in both folders which means taken up valuable harddrive space, is it advisable to delette the 32bit folder.
View 5 Replies View RelatedWhen I browse for a printer on the network I can see the workgroup, I can see the PC with the printer, but I don't see the printer show up under the PC in the Add Printer Wizard dialog. This was easy for me back when there were two machines running XP.
I have installed the x86 printer driver on the Vista machine. Would this be easier if I upgraded the Vista machine to Windows 7?
Computer 1 is my home desktop running Vista Premium SP1. It is on the 'workgroup' workgroup. Computer 2 is my work laptop (on docking station) running XP Pro SP2. It is on a domain called 'amer'. There is an HP LaserJet 2100 connected to the Vista machine. It is shared. This is a wired network with D-Link router. At first I thought it was a sharing issue when I could not print from the XP machine to the printer on the Vista machine. But then I realized it is a network issue because if I try to browse the Vista machine from the XP machine I get the 'no access, you may not have permission', etc. message. To make it work, I :
1. start the XP machine (assuming the Vista machine is already running)
2. wait about 15 minutes for the Vista machine to see that the XP machine is there.
3. Browse to and open the XP machine from the Vista machine
4. Go to the XP machine, open its workgroup (amer) and then open the XP machine
5. Wait a minute or so, then while still on the XP machine, navigate to
Vista machine's workgroup ('workgroup') and open the workgroup. If the Vista machine appears I am good to go. I don't need to browse it, it just needs to appear.........................
Its been about three months since I've given up trying to network my Vista machine with my XP machine, but I thought I would try it again. here are my symptoms again:
*Vista (Ultimate) machine cannot see XP (Home SP2) machine.
*XP machine can see and access the Vista machine.
*Xp machine shows up in the Vista Network Map, but not the Network Folder.
*Both machines can ping each other.
*I can access the XP machine via IP address, I can access the shared folder but not a shared printer.
*IPConfig for Vista shows that NetBIOS over TCP/IP is disabled even though it is enabled in the Network Adaptor Properties dialog. (NetBIOS over TCP/IP always enabled, the middle radio button)
Other information:
*Everything worked as it should once apon a time, then it all went to Hell. It could have been an update, tweaking software, or antivirus setting, but I notcie too late to do anything about it.
*I know it can't be that I don't have the same User/Password on both machines (I tried it anyway but it still didn't work), because it worked awhile back without having the same accounts on both machines.
*I had Bitdefender 2008 on the Vista machine, the Firewall log had entries that the ports 138 and 139 were being refused, despite having the XP machine being on the trusted list (by its IP address). So I uninstalled the Antivirus, but the problem persists.
*The XP machine has Zone Alarm Internet Security.................
i have wasted 54 cd tring to back up my computer. everytime i get to the 17Th cd and put a new cd just to make sue that there is no problem with the cd/s.
i never had this before. the computer well not get done backing up my computer. it just freeze up. then said can not back up your computer. what should i do. i have vista. the computer i have is a t3604 emachines.
Microsoft recommends using systempropertiesprotection for backing up the registry. Presumably, this backs up the registry to the hard drive. I think that it might be a good idea to have an external backup as well (CD-R). But how can one obtain this from systempropertiesprotection?
View 7 Replies View RelatedI have bought a WD external hard drive, and backed up the contents of my family's computers onto it. I was intending to update the back up on a regular basis- will the files get automatically overwritten? I'm assuming so as I can't see how you would remember which files were new.
View 5 Replies View RelatedI have just finished a back-up of my files as of June 30th, It took 5 DVD's to complete using the "Back Up Program" on my Vista Home Premium, 32 bit start menu. Does this sound reasonable? If it became necessary to restore my files following a hard disc problem, would all my spreadsheets, letters, programs, registry, desk top, etc. be restored to the condition they are now? If not, what would likely be lost? As you see, I am not very knowledgeable concerning computer details.
View 8 Replies View RelatedWhat is the easist way to backup the registry? Vista 32 bit
View 4 Replies View RelatedI started using Vista recently, after I bought a laptop with Vista preinstalled. When prompted, I made a Vista recovery disc. So, hopefully, I am protected, if the operating system gets corrupted on my hard drive. Next, I wanted to also back up the rest of my hard drive (data, programs, file structure, etc.) so that if my hard drive got corrupted, I can reinstall Vista using the recovery disc, then reinstall the rest of my data and program files using my hard drive backup copy. To make a hard drive backup copy, I purchased a standalone hard drive with a USB plug. The portable drive is about 50GB bigger than my laptop's hard drive. I then used Vista's Control Panel/System and Maintenance/Backup Your Computer.
This method of backing up my hard drive took ages (several hours) which surprised me, as the entire contents of my hard drive only amounts to 96.5 GB. I later foud out why: Vista had, wile in the process of backing up my hard drive, compressed everything into a lot of roughly-equal-sized zip files. What I am aiming for is a way to reinstall my entire hard drive contents, Vista and all, in a simple, quick way, so that my laptop will be the same as it was before the file corruption occurred.
To achieve this, can I not simply drag-and-drop my laptop's C: drive into the standalone drive? I think that avoiding file compression would also lessen the possibility of data degradation or corruption during the process. I've known image files, in particular, suffer badly from the compression and subsequent decompression. Then, when I want to retore my hard drive, I can simply drag-and-drop the contents of the standalobe drive into "computer" in Vista's file manager, yes?
How do I backup/restore mail rules created by me.
View 9 Replies View RelatedI have a 13Gb image backup which I would like to copy to DVD. Is there a utility which will split this file (and recombine it) into DVD size chunks which I can then copy to disk? Or a DVD burning utility which will do this automatically?
View 9 Replies View RelatedI have recently backed up the registry (Vista 32 bit). Do I need to keep it on the C Drive, or can I move it to a CD-R?
View 7 Replies View RelatedI'm having problems with a client running Windows Vista backup. Their external backup drive to which Vista is backing up data is filling up. Is there any way to tell Vista to "groom" the data, removing older data to keep the drive afloat? Or, is there way to have Vista completely reset the entire backup set on a regular schedule?
View 6 Replies View RelatedI have my desktop set up the way I like it and have my icons grouped in different parts of the screen and in an order that I like. Every so often, something happens like an error or booting into safe mode that sends all my icons to be aligned together starting in the upper left of my screen. Then I have to put them back in order. There appears to be some order in which they're realigned, but the order isn't consistent between the groups. How can I create a backup of my desktop display so that I won't have to move every icon back into place manually? Is there a file somewhere that I can copy back into place when this happens?
View 5 Replies View Relatedhow to backup my E Mails either on an external drive or a CD
View 9 Replies View Relatedit seems I'm close to having to do a complete reformat/system recovery. I have just about everything backed up on externals anyway, so it's not the end of the world. My major concern is my firefox settings/bookmarks. Is there a settings file or files that I can back up, and then, when I re-install firefox on the fresh OS, copy those files to the "new" OS so it automatically knows all my settings and bookmarks?
View 6 Replies View RelatedI'm trying to back up a large program to several discs. In XP this was not a problem. It prompted you for the next disc. However in Vista (I have the Home Edition,) I'm told the disc is too small and to either "retry" or "cancel." I can't believe it doesn't do what XP did...I've already saved the program to a removable hard drive but I'd like to back it up to disc anyway. Am I missing something in the control panel? A setting of some kind? Or doest Vista just NOT do that?
View 4 Replies View RelatedI have a portable USB hard drive. I have it installed and configured, but I can not find how I actually back up my files. The only help I can find on the Windows help site is for Vista.
View 4 Replies View RelatedI'm using Backup & Restore in Vista Home Premium x64 for easy backups. There are however a couple issues with it.First, is it possible to make Vista backup only individual folders?Second, I have Backup & Restore set to making daily incremental backups of all files (that can be selected in the wizard) on my C drive. Thing is, I have folders with applications in the root of C. E.g. C:Prog1, C:Prog2,etc... I had to retrieve backups a while back. You can only guess when all other files where restored except the .exe files n :Prog1, C:Prog2 and so on. After reading around a bit I found out that B&R doesn't backup executable
files. Any way to get around this.
I would like to create a file/files that have my newsgroup settings from Windows Mail, that I can import the next time I have to reinstall Vista. Does Windows Mail make a backup file? I searched the Vista help files but the only thing I saw was the Windows easy transfer wizard---I would like to keep this file in my Documents folder, which I back up to an external drive--Windows won't save the file to the same hard drive like I would prefer. Is there any other way to back up my Windows Mail settings?
I see in Windows Mail, the Tools>Accounts button will give me a new window, which allows me to click Export, which will produce an .iaf file. Is this what I am interested in?
I'm trying to help a friend with Windows Vista copy her e-mail storage to a flash drive for backup. I found the location of the storage folder (which is not easy, it's listed under Tools, Options, Advanced). I tried copying the "Local Folders" folder, which is the master folder for all the e-mails, to the flash drive. It began prompting at each e-mail (all 11,000 of them), saying "if you copy this, it will be without the file properties. Proceed?" Copying all the e-mails without their file properties didn't sound like a good idea, so I stopped.
Then I thought of exporting the e-mails instead of copying them. I selected Local Folders in the e-mail program, File, Export, browse for destination. But the Save As dialog that opens only opened to a subfolder of her named personal folder, not to Computer. It was impossible to navigate the Save As dialog to Computer and thence to the flash drive. What kind of Save As dialog opens to a subfolder and refuses to let you navigate up the hierarchy to where you want to get to?
This is for XP more than for Vista. I have been using Outlook since as far as I can remember but, there are times that I want to ring its neck or tear it apart limb from limb...I guess is better I don't know who the creator is But I digress... Anyways, back to my original thought. I have been having some issues with Outlook (best to use a new thread for this) so I decided to change to Mozilla Thunderbird but it didn't work like I thought it would (again... new thread). Bottom line is ...I have to go back to Outlook 2003. My pet peeve is that, even though I back up my pst files, eveytime I need to do a clean Outlook 2003 install or simple migration of sorts, I loose my custom settings, rules & alerts, etc, Is there an easy way to back up all these custom settings as well so you can migrate Outlook painlessly? I have done the google 'till my eyes drew blood but all I am getting are mixed solutions or me having to install a 3rd party software...Right now I have 3 e-mail accounts being handled by Outlook, my Office Personal, Company's bulk e-mail and Company's g-mail so I use a lot of custom settings.
View 6 Replies View Related
