Its been about three months since I've given up trying to network my Vista machine with my XP machine, but I thought I would try it again. here are my symptoms again:
*Vista (Ultimate) machine cannot see XP (Home SP2) machine.
*XP machine can see and access the Vista machine.
*Xp machine shows up in the Vista Network Map, but not the Network Folder.
*Both machines can ping each other.
*I can access the XP machine via IP address, I can access the shared folder but not a shared printer.
*IPConfig for Vista shows that NetBIOS over TCP/IP is disabled even though it is enabled in the Network Adaptor Properties dialog. (NetBIOS over TCP/IP always enabled, the middle radio button)
Other information:
*Everything worked as it should once apon a time, then it all went to Hell. It could have been an update, tweaking software, or antivirus setting, but I notcie too late to do anything about it.
*I know it can't be that I don't have the same User/Password on both machines (I tried it anyway but it still didn't work), because it worked awhile back without having the same accounts on both machines.
*I had Bitdefender 2008 on the Vista machine, the Firewall log had entries that the ports 138 and 139 were being refused, despite having the XP machine being on the trusted list (by its IP address). So I uninstalled the Antivirus, but the problem persists.
*The XP machine has Zone Alarm Internet Security.................
Computer 1 is my home desktop running Vista Premium SP1. It is on the 'workgroup' workgroup. Computer 2 is my work laptop (on docking station) running XP Pro SP2. It is on a domain called 'amer'. There is an HP LaserJet 2100 connected to the Vista machine. It is shared. This is a wired network with D-Link router. At first I thought it was a sharing issue when I could not print from the XP machine to the printer on the Vista machine. But then I realized it is a network issue because if I try to browse the Vista machine from the XP machine I get the 'no access, you may not have permission', etc. message. To make it work, I :
1. start the XP machine (assuming the Vista machine is already running) 2. wait about 15 minutes for the Vista machine to see that the XP machine is there. 3. Browse to and open the XP machine from the Vista machine 4. Go to the XP machine, open its workgroup (amer) and then open the XP machine 5. Wait a minute or so, then while still on the XP machine, navigate to Vista machine's workgroup ('workgroup') and open the workgroup. If the Vista machine appears I am good to go. I don't need to browse it, it just needs to appear.........................
I have 3 ip's from my cable provider. I use a switch to connect to internet. I have 3 PC's 2 XP Pro One vista Ult. My two xp machines see each other and share fine but I can not get my Vista machine to see the XP machines. I have done all the proper updates etc...I can ping the xp boxes etc.
i have a problem with printing from my Vista system to a XP Machine.
My printer [hp deskjet 940c usb conneted] is installed on the XP Machine witch hangs on the local network. When i instal the printer trough the network on my Vista system it doen't work. I can complete the instal but when i try to print nothing is happening?
When I browse for a printer on the network I can see the workgroup, I can see the PC with the printer, but I don't see the printer show up under the PC in the Add Printer Wizard dialog. This was easy for me back when there were two machines running XP.
I have installed the x86 printer driver on the Vista machine. Would this be easier if I upgraded the Vista machine to Windows 7?
Strange behaviour, Vista 64-XP 32 network using Netgear Router. At Vista start up when XP is already running I am unable to see the XP computer from the Vista computer, even though the XP is seen on the Vista Network Map. When XP is started after Vista computer is up then all is normal and correct. At all times the XP computer can see and access the Vista computer, the problem appears only when Vista is booted after the XP bootup.
We have our network setup so that we can see and access all the machines in the home network even including two game counsels but we cannot see the one machine in the house that runs on Windows XP. It is the only one that is hardwired to the router. All the machines are visible in the workgroup on the XP machine but is not seen on any of the Vista machines. When I doubleclick the other machines in the workgroup from the one running Windows XP the user name and password key appears but one of the other Vista machines says "The network path was not found." That probably has to do with the firewall correct? What I'm trying to get accomplished here is to be able to see the XP machine on all the other computers and be able to access it from the Vista machines. What is the next step to try and get this resolved?
We have XP computers and an external hard drive on a network, all working fine. Just got a new Vista computer right out of the box and I can not get it to do anything with the network and none of the other computers can see it either. There are no fancy setups, just a small business network. There isnt even an internet connection we need to deal with. With Vista, all i can see is an "unidentified network" as being seen but it doesnt seem to do anything with it.
how to network two Vista machines using their respective machine names? I'm only able to access shared folders using IP addresses. - The two machines are a laptop running Vista Business x64 and a desktop running Vista Home Premium x64. - Both machines have File Sharing, Network Discovery, and Password Protected Sharing turned on. - They are on the same workgroup (no domain). - I am able to see the machines in Network Explorer, but if I double-click on them, all I see is the printer (not the shared folders) or I get an error message telling me the machine is inaccessible. Both machines have been assigned a static IP address by the router. ............
I do alot of file copy and move between HDD and external and network machine. Everytime I want to paste a file, I have to drag the name column in explorer left to give room on right then move the last column left also to touch screen and paste. On XP I can touch anywhere. I can save layout and selected views of folder but not the thickness of the columns.
I have 2 computers,1printer, xbox360,and ps2. Comp1 running vista and comp2 running winxp sp3. I also have a 5 port ethernet hub. Last week I switched from DSL to Cable 20mb. With the dsl router all I had to do to allow both machines on line at same time was to just hook them up to the hub. No modifications needed. My problem is that the new cable modem (motorola) will only allow One machine on at a time. To switch machines I must reset the modem and re asign ip each time I switch machines. My ultimate goal in the end is to have all 4 machines be able to access the internet and each other. Can I accomplish this with the 5 port HUB, or do I need to buy a router. (wireless is out of the question).
Have HP Pavioin with VISTA, one physical drive (C with four partitions on it.
C: is the one with VISTA
D: recovery
E and F - logical partitions for data storage.
Want to install XP into one of the existong partitions. However when the installation process come to the screen to select a partition it shows no partition at all. Instead it shows four things which look like drive placeholders, each saying that there is no drive in it.
Just installed Vista Home Premium x64 on my backup machine and all went well. The next day I installed Nero BackItUp Burn on the same machine and it said at the outset it needed to install Microsoft Visual C++ 2005 Redistributable to continue so I clicked O.K. and the program went in and worked just fine. No problems with Vista so I went on to install the 51 updates, SP1 and SP2 and all was still fine. Went into Control Panel to Programs and Features to view the list and found two instances of Microsoft Visual C++ 2005 Redistributable one on the day Vista was installed, and one the next when Nero BackItUp was installed. My question is do I need both of these files as they appear to be the same? I checked my primary machine same OS and it only has one instance of this file.
Problem is network bandwidth as measured by the speed test(s) will decrease over time without any changes being made -- it does not matter what time of day either. It is a Vista PC running SP2 and hard wired to a Linksys router (Wireless-G model) and I am a Comcast customer with 30mbps service. Maybe I should mention this PC sits idle for most of the day before the family comes home from school. All of the XP systems in the house do NOT have this problem.
As you can see over the course of 5 days the download speed drops into the 2-3 mbps range (and the upload speeds are greater than the download speeds !! ) The 12mbps measurement was taken after the reboot. The only fix I have found is rebooting the machine --- then performance is as expected for a day or so before it starts to drop again.
My wife's desktop machine is a HP a1730n running Vista Home Premium. After putting it in standby, after a short while, it comes back up to operation. Most of the time it does this but sometimes, it will go all night staying in standby. I asked this group about this and got the advice to go to advanced settings in Power Options and change the multimedia setting "when showing multimedia" to "allow the computer to sleep". This seemed to fix it for a short while and then it reverted back to not staying in standby. I am looking for some more advanced wisdom on this problem and hope for a solution!
I cant seem to boot my Vista PC AFTER installing SP2 last night. I had my PC on Automatic Updates and it asked me to restart my PC. Instead i shutdown and went to bed. i didnt shut down the power supply because i figured it might do the install process when i shut down.
This morning all i get is a black blinking screen with an error message
I have a HP Pavillion M8150N with a quad core 2.4, (2)320 drives, upgraded to 4gbram (that was a waste) ... and ... its a great machine. I bought it 18 months ago and it fixed every problem I had with my old celeron 1.7 machine. I bought a project pavillion M9040N desktop box with no hard drives. I bought an HP Restore Disc and moved my (1) unused 320 SATA drive from my 8150 to the other machine ... and expected to just restore vista and have a backup machine.
It wasn't quite that easy. After (20) tries, I <powered on>, <hit F10>, entered the setup program and made the HD the first device, made the CD the 3rd device, made the HD the first boot device, and set it to display the parameters as it loaded. I dont know if I said that right.....
I have been trying to install Vista for days now on my new gaming machine but it just won't work. I have a Gigabyte GA-P35-DS3R Rev 2.1 mobo, Gigabyte 8800GT graphics card, 2 Seagate Barracuda 7200.10 320GB drives in RAID 0 and 4GB of TEAM Xtreem Dark PC2-6400 CL4 ram. I have been into the BIOS and enabled RAID and setup a RAID array in RAID BIOS. I have also downloaded the correct RAID driver from the Gigabyte website and I load it when windows prompts me. Here is what's happening.
Everything good during windows install until it gets to completing installation part. Computer restarts as it says and then continues to install windows. Screen goes black and I lose power to mouse, keyboard and all usb ports. If it is my RAID array being incorrectly setup what would it be that I have done wrong? The BIOS seems very simple so I don't quite know how I would have made a mistake. The only thing I can think of is the stripe size part which I left at 128KB.
I have 4GB of ram in 4x1GB sticks which came in pairs. I put one pair in one colour slot and the other pair in the other colour slot. Could this be an issue? I haven't done anything with the ram in the BIOS. In the BIOS do I need SATA AHCI Mode enabled? It's currently disabled. I put my drives in the yellow SATAII0 and SATAII1 ports and my cd drive in the SATAII2 port. Is this correct?
My friend and I have been going back and forth about his computer for a while. When Vista is installed it runs fine. Its not until we add the ATI vista 64 drivers does the machine slow down to a crawl. Originally this was with an x1600xt so we upgraded to the hd2600xt. Same issue. Now comes the weird part. So we got our hands on a single core amd 64 3200+ cpu and put it in. Now the machine runs fine. Why would using a dual core processor slow the machine down significantly. He has set up a dual boot with xp 64 and it runs fine with the x2 processor.
I have 2 XP machines and 1 Vista machine. The Vista machine can access the XP machines (using a variety of methods), but the XP machines cannot access the Vista machine (in any way/shape/form). That includes "ping", file sharing, an HTTP server, anything. All computers are in the same workgroup and subnet.
I have a strange problem. I am running Vista Ultimate 32 bit dual boot with linux in a Toshiba Laptop. When computer successfully starts there is no problem in any OS. But the problem is to start vista. After working at night I turn off the machine and in the morning when I start, the vista roller icon just rolls, it can't proceed, sometimes it restarts saying that unmountable boot volume. But if I do a hard shutdown (by power button) and start again then machine starts as normally as if there is no problem at all and run all day smoothly (can stop and start multiple times). So it is the problem of starting machine first after several hours of last shutdown. And it is not a one-of problem, it is happening last several days.
Another point, when computer starts successfully it makes a click sound during the vista roller animation and then it starts, no click sound means it can't start. I have installed SP1 recently, the problem occurred even before that. There is another big problem is that I can't go back to XP as no XP (pro, pro+sp1, pro+sp2, pro+sp3, 64bit) can't be installed in my machine as none of them can find a hard drive although the machine came with XP preinstalled.
I am running Windows Vista Home basic on an E Machine. I am new to computers and don't know very much. I need an instruction book. For instance: I am trying to learn about screen shots. One web site said click on PrtScrn and it would put the imange on the clip board. I go to msprint and there are two files listed (I clicked twice) I want to delete them and start over. I need a book that gives me smiple directions about things like that.
I have 4 PC's running Win XP and use Windows 98 Backup to transfer files and keep things in sync. One of the computers is at a remote location during the summer so I can't use a network to transfer files. All computers have identical file structures and I've found that using Win 98 backup works great since it allows data compression and I simply have to make a backup, transfer the .qic file to a CD and then do a restore. The XP backup software does not allow data compression unless you are backing up to a tape drive.
To get Win 98 backup to work on XP I carefully transfer the appropriate files that are used by Win 98 backup to the c:windowssystem32 directory and, most importantly, I set program compatibility for Windows 98. I am faced with replacing my old laptop with a new one and it seems that it will be difficult to buy one with Win XP. So my question is: Is it possible that Windows 98 backup will work on a Vista machine? Does Vista have program compatibility mode that can be set like XP has?
The installation of SmartSecurity caused my VISTA machine to core! I cannot boot up in windows! I can boot up in safe mode alone and safe mode with network connections, which is how I am getting this email to you. What do I do now? There is nothing listed as being installed on add/ remove programs, but there is a Start-Programs->Eset->EsetSmart Security with a few things listed. When I tried to uninstall to see if I could get a fresh install going- it said I could only uninstall apps that are installed. I don't know what to do!!
Got a problem browsing Internet from Vista Ultimate x64 machine. Symptoms:
- Can browse for about 10 secs before it stops working - Can still ping stuff - Laptop on same network works perfect - ISP bill is paid
What I done so far: - Reset router and stripped it right down to no additional services/security running - Reset winsock - Removed/disabled all firewall software on the system What I am trying now: - Gonna run SpyBot - Gonna run Winsockfix (still think that's where the issue is) What to do next?
I have a PC that had XP pro installed 1st. Then I installed Vista using the dual boot option on the vista DVD. Everything went well and it all worked fine. I've been happily using Vista for months now, and I've not used XP for some time. But now I need to use it, and it won't boot up.
It gets as far as the log in screen. But the keyboard and mouse don't work. (they do during boot up as I can use the keyboard to choose the OS). Same thing in safe mode. How can I repair the XP installation (or do a new one from scratch), with out messing up the Vista installation and keeping the dual boot option.
A friend found out that I have a Vista computer so he brought me his wife's computer to find out why it is so slow. I have no problems with mine but this Vista Home Basic PC is ungodly slow. Just to open an Explorer window takes over 90 seconds. I scheduled a checkdisk and ran it on the next reboot. I defragged and ran the disk cleanup wizard. I downloaded and reinstalled the ATI video drivers after seeing an eror message about ATI. It is slightly faster but not enough to make any difference to the user. Where do I find the diagnostics, or logs or something that can tell me what is slowing it down so that I can fix it? I couldn't find a diagnostic on the eMachine site. My last option will be to reformat and start over but I'd rather not do that if there is a way to fix it instead. It's an eMachine with only 512 MB RAM, but it did run much faster when new. Intel Pentium 3.0 GHz, 160 GB HDD. Also the wireless card is very slow, but the wired connection is pretty fast for downloading.
I have a laptop running Vista, my desktop is running XP, i want to be able to access files and the printer which is connected to the Xp machine on my vista laptop, but they cannot see each other. I have the file and printer sharing stuff turned on on the laptop. Also I am running AVG on both systems and I have the Windows firewall enabled on both. Both are connected to a D-link router, DESktop is wired, laptop is wireless. Also a friend of mine came over and has the same laptop as me except he is running XP on his and he had no problem seeing my desktop, or accessing its files.
Just for the record I downloaded SP1 and ran it on my Vista Home Premium machine. Went away and had a cuppa. Came back and it was all done and dusted. No problems, no issues, no disasters, no glitches, no crashes, no blue screens, no screaming or gnashing of teeth. What HAVE I done wrong?
