i have a problem with printing from my Vista system to a XP Machine.
My printer [hp deskjet 940c usb conneted] is installed on the XP Machine witch hangs on the local network. When i instal the printer trough the network on my Vista system it doen't
work. I can complete the instal but when i try to print nothing is happening?
Its been about three months since I've given up trying to network my Vista machine with my XP machine, but I thought I would try it again. here are my symptoms again:
*Vista (Ultimate) machine cannot see XP (Home SP2) machine.
*XP machine can see and access the Vista machine.
*Xp machine shows up in the Vista Network Map, but not the Network Folder.
*Both machines can ping each other.
*I can access the XP machine via IP address, I can access the shared folder but not a shared printer.
*IPConfig for Vista shows that NetBIOS over TCP/IP is disabled even though it is enabled in the Network Adaptor Properties dialog. (NetBIOS over TCP/IP always enabled, the middle radio button)
Other information:
*Everything worked as it should once apon a time, then it all went to Hell. It could have been an update, tweaking software, or antivirus setting, but I notcie too late to do anything about it.
*I know it can't be that I don't have the same User/Password on both machines (I tried it anyway but it still didn't work), because it worked awhile back without having the same accounts on both machines.
*I had Bitdefender 2008 on the Vista machine, the Firewall log had entries that the ports 138 and 139 were being refused, despite having the XP machine being on the trusted list (by its IP address). So I uninstalled the Antivirus, but the problem persists.
*The XP machine has Zone Alarm Internet Security.................
I have 3 ip's from my cable provider. I use a switch to connect to internet. I have 3 PC's 2 XP Pro One vista Ult. My two xp machines see each other and share fine but I can not get my Vista machine to see the XP machines. I have done all the proper updates etc...I can ping the xp boxes etc.
View 5 Replies View RelatedComputer 1 is my home desktop running Vista Premium SP1. It is on the 'workgroup' workgroup. Computer 2 is my work laptop (on docking station) running XP Pro SP2. It is on a domain called 'amer'. There is an HP LaserJet 2100 connected to the Vista machine. It is shared. This is a wired network with D-Link router. At first I thought it was a sharing issue when I could not print from the XP machine to the printer on the Vista machine. But then I realized it is a network issue because if I try to browse the Vista machine from the XP machine I get the 'no access, you may not have permission', etc. message. To make it work, I :
1. start the XP machine (assuming the Vista machine is already running)
2. wait about 15 minutes for the Vista machine to see that the XP machine is there.
3. Browse to and open the XP machine from the Vista machine
4. Go to the XP machine, open its workgroup (amer) and then open the XP machine
5. Wait a minute or so, then while still on the XP machine, navigate to
Vista machine's workgroup ('workgroup') and open the workgroup. If the Vista machine appears I am good to go. I don't need to browse it, it just needs to appear.........................
i run a wirless net work with 2 XP computers and 1 vista computers I can see every one on my network map on my vista computer but not in the network section. My printer is slaved off of my desktop XP and my XP laptop can print to it. However I can't get my Vista lap top to access the hard drive of either computer or the printer. I have install the patch on both xp computers and the printer is vista compatable. network discovery is turned on on my vista computer.
View 5 Replies View RelatedI have an annoying problem that might be a Vista problem. I am using a D-Link router with a built-in printerserver and a USB cable from the server to a HP Deskjet printer (I have two, one 1500-series, one 2300, both having the same problem). Ok. I install the printer via a TCP/IP port, no problem. I print a test page, it starts ok, but stops and hangs 2-3 lines from the end, and the print queu hangs. I have contacted HP, no help, and Microsoft, no help. No error messages. Has anyone heard of this, I have found nothing in different fora? In addition: I also have a PC using XP, use the same print server and printer without any problems
View 6 Replies View RelatedI have a Canon multifunction machine hooked up to an XP computer. I can print to it with two other XP machines and a Windows 7 machine. But when I try to install the Canon Vista x64 driver on the Vista machine, it looks for a printer attached to the computer in order to complete the driver installation and it will NOT find the networked printer. So, the driver install stops. I have tried hooking the printer up to the Vista machine and the driver install completes. But, when I go back in and try to reattach the printer to the XP machine and find the drivers, the Vista machine won't find the damned drivers. Geez, Vista sucks. (But at least 7 is great)
View 5 Replies View RelatedMy home network consists of a DSL Modem, Wireless Router, 5 computers (One Computer is a notebook with Vista Home Basic), and a HP840C printer, which is connected as a network printer. Everything works fine except the one notebook with Vista Home Basic. An Acer aspire with preinstalled OS. Microsoft says that Acer is the OEM and responsible for the Vista Home Basic OS. Acer suggests updating driver. HP says the driver is OK. All the computers see the network and can communicate and access the internet just fine. My only problem is printing with the Vista. That computer will print ok after I install printer and driver, but after I shut the computer off and restart, I can't print. The print jobs get stuck in the print queue and nothing happens. The print jobs remain in the queue until I cancel them. If I connect the printer directly to the notebook's USB port it works fine. The computers with win98se OS and with XP OS have no problem.
View 4 Replies View RelatedI replaced the XP Home desktop machine (died) that hosts our laser printer. The new box is Windows Vista. After the usual pain of working through issues, it mostly is satisfactory. Two problems remain with network printing. 1) If the host machine (Vista) has fallen into an idle state (I haven't tweaked standard settings), my XP machine is unable to print to the printer on the Vista system. I have to go and move the mouse to wake it up. XP as a host never had this problem.
2) If either computer is rebooted for any reason, I lose access to the network printer. I have to delete it and add it again. I assume this has to do with the inability to retain the account/password to access the Vista system. I'd really like a fix for these annoyances.
My XP desktop and my Vista laptop are on the same network. I share and print with my laptop wirelessly with no problem, but I was wondering; when my desktop is turned off, I can't print from my laptop. The printer goes offline. Is there any way that I can print on my laptop without having to turn on my desktop PC too?
View 9 Replies View RelatedI originally posted this 6-24 on only the Vista Printer_fax_scan NG with no response. Multiposted now to broaden the range of people seeing the post. Really need assistance. TIA.
I have a laptop (new HP) with Vista Home Premium SP1 preinstalled, 3 GB RAM,250GB HDD, AMD Turion 64 processor. Using Zone Alarm free as firewall and AVG 8 free as antivirus. Know that firewall is not issue since have full access to printers (can ping the network connected printers) and all other networked computers without problem. I understand that AVG has had a printing issue in the past but I totally turned off AVG by uninstalling itand this did not clear the issue with printing.
Out of the box I have connected the new laptop to the following printers using the latest drivers available from the manufacturers or using Vista's built in if the drivers aren't available from manufacturer's web site.
The following are connected through the home network via wireless and work flawlessly with 3 laptops running XP Pro (2) and XP Home (1).HP 2200DN - B & W Laser (network with Cat5e cable through WAP/Switch) OKIDATA 5150 - Color laser (network with Cat5e cable through WAP/Switch)Epson 1280 (connected through a Sony XP computer share) Epson R260 (also connected through the Sony XP computer)
The last printer is a Canon BJC80 which is connected via a USB to Parallel printer cable (Belkin) which works great with no delay on any of the laptops running XP.
Strange behaviour, Vista 64-XP 32 network using Netgear Router. At Vista start up when XP is already running I am unable to see the XP computer from the Vista computer, even though the XP is seen on the Vista Network Map.
When XP is started after Vista computer is up then all is normal and correct. At all times the XP computer can see and access the Vista computer, the problem appears only when Vista is booted after the XP bootup.
We have our network setup so that we can see and access all the machines in the home network even including two game counsels but we cannot see the one machine in the house that runs on Windows XP. It is the only one that is hardwired to the router. All the machines are visible in the workgroup on the XP machine but is not seen on any of the Vista machines. When I doubleclick the other machines in the workgroup from the one running Windows XP the user name and password key appears but one of the other Vista machines says "The network path was not found." That probably has to do with the firewall correct? What I'm trying to get accomplished here is to be able to see the XP machine on all the other computers and be able to access it from the Vista machines. What is the next step to try and get this resolved?
View 4 Replies View RelatedWe have XP computers and an external hard drive on a network, all working fine. Just got a new Vista computer right out of the box and I can not get it to do anything with the network and none of the other computers can see it either. There are no fancy setups, just a small business network. There isnt even an internet connection we need to deal with. With Vista, all i can see is an "unidentified network" as being seen but it doesnt seem to do anything with it.
View 4 Replies View Relatedhow to network two Vista machines using their respective machine names? I'm only able to access shared folders using IP addresses. - The two machines are a laptop running Vista Business x64 and a desktop running Vista Home Premium x64. - Both machines have File Sharing, Network Discovery, and Password Protected Sharing turned on. - They are on the same workgroup (no domain). - I am able to see the machines in Network Explorer, but if I double-click on them, all I see is the printer (not the shared folders) or I get an error message telling me the machine is inaccessible. Both machines have been assigned a static IP address by the router.
............
I do alot of file copy and move between HDD and external and network machine. Everytime I want to paste a file, I have to drag the name column in explorer left to give room on right then move the last column left also to touch screen and paste. On XP I can touch anywhere. I can save layout and selected views of folder but not the thickness of the columns.
View 4 Replies View RelatedI have 2 computers,1printer, xbox360,and ps2. Comp1 running vista and comp2 running winxp sp3. I also have a 5 port ethernet hub. Last week I switched from DSL to Cable 20mb. With the dsl router all I had to do to allow both machines on line at same time was to just hook them up to the hub. No modifications needed. My problem is that the new cable modem (motorola) will only allow One machine on at a time. To switch machines I must reset the modem and re asign ip each time I switch machines. My ultimate goal in the end is to have all 4 machines be able to access the internet and each other. Can I accomplish this with the 5 port HUB, or do I need to buy a router. (wireless is out of the question).
after weeks of fighting, troubleshooting, debugging, deleting, reloading, uninstalling, installing etc etc etc. I have finally come to the conclusion, that being able to print, is simply no longer a feature with windows operating system. Unless someone can tell me a fix that no one has discovered yet. I refuse to believe that the fix to our printing problems, is throw out the PC and get a new one. If thats the case i'm sure that there will be many people like myself who make the leap to MAC!
View 6 Replies View Relatedi have Vista64 and Windows Mail. Yesterday i installed IE8 and all the office 2007 patches (don't know if relevant). Now i am having problems printing emails. I get a windows with a script error (i have a German windows, so i try to translate the error to english):
Title: Internet Explorer Scripterror
Line 291
Character ( Column ?) 1
Error: Interface not registered
Code 0
No i can stop the script or continue, but nothing happens. I don't get a print dialog nor a print out.
Problem is network bandwidth as measured by the speed test(s) will decrease over time without any changes being made -- it does not matter what time of day either. It is a Vista PC running SP2 and hard wired to a Linksys router (Wireless-G model) and I am a Comcast customer with 30mbps service. Maybe I should mention this PC sits idle for most of the day before the family comes home from school. All of the XP systems in the house do NOT have this problem.
As you can see over the course of 5 days the download speed drops into the 2-3 mbps range (and the upload speeds are greater than the download speeds !! ) The 12mbps measurement was taken after the reboot. The only fix I have found is rebooting the machine --- then performance is as expected for a day or so before it starts to drop again.
I'm using Vista Home Premium and Windows Update tells me I'm up to date.
Every so often the Network icon in the System Tray tells me that it is not connected to a Network (by displaying a red X) though I can clearly see that I am.
Have HP Pavioin with VISTA, one physical drive (C with four partitions on it.
C: is the one with VISTA
D: recovery
E and F - logical partitions for data storage.
Want to install XP into one of the existong partitions. However when the installation process come to the screen to select a partition it shows no partition at all. Instead it shows four things which look like drive placeholders, each saying that there is no drive in it.
Can the MRC be installed on a Vista machine?
View 9 Replies View RelatedJust installed Vista Home Premium x64 on my backup machine and all went well. The next day I installed Nero BackItUp Burn on the same machine and it said at the outset it needed to install Microsoft Visual C++ 2005 Redistributable to continue so I clicked O.K. and the program went in and worked just fine. No problems with Vista so I went on to install the 51 updates, SP1 and SP2 and all was still fine. Went into Control Panel to Programs and Features to view the list and found two instances of Microsoft Visual C++ 2005 Redistributable one on the day Vista was installed, and one the next when Nero BackItUp was installed. My question is do I need both of these files as they appear to be the same? I checked my primary machine same OS and it only has one instance of this file.
View 4 Replies View RelatedMy wife's desktop machine is a HP a1730n running Vista Home Premium. After
putting it in standby, after a short while, it comes back up to operation.
Most of the time it does this but sometimes, it will go all night staying in
standby. I asked this group about this and got the advice to go to advanced
settings in Power Options and change the multimedia setting "when showing
multimedia" to "allow the computer to sleep". This seemed to fix it for a
short while and then it reverted back to not staying in standby. I am
looking for some more advanced wisdom on this problem and hope for a
solution!
I cant seem to boot my Vista PC AFTER installing SP2 last night. I had my PC on Automatic Updates and it asked me to restart my PC. Instead i shutdown and went to bed. i didnt shut down the power supply because i figured it might do the install process when i shut down.
This morning all i get is a black blinking screen with an error message
*!! 0xc0190036 !! 4081/75104 (ServiceModelEvents.dll)"*
I have a HP Pavillion M8150N with a quad core 2.4, (2)320 drives, upgraded to 4gbram (that was a waste) ... and ... its a great machine. I bought it 18 months ago and it fixed every problem I had with my old celeron 1.7 machine. I bought a project pavillion M9040N desktop box with no hard drives. I bought an HP Restore Disc and moved my (1) unused 320 SATA drive from my 8150 to the other machine ... and expected to just restore vista and have a backup machine.
It wasn't quite that easy. After (20) tries, I <powered on>, <hit F10>, entered the setup program and made the HD the first device, made the CD the 3rd device, made the HD the first boot device, and set it to display the parameters as it loaded. I dont know if I said that right.....
I have been trying to install Vista for days now on my new gaming machine but it just won't work. I have a Gigabyte GA-P35-DS3R Rev 2.1 mobo, Gigabyte 8800GT graphics card, 2 Seagate Barracuda 7200.10 320GB drives in RAID 0 and 4GB of TEAM Xtreem Dark PC2-6400 CL4 ram. I have been into the BIOS and enabled RAID and setup a RAID array in RAID BIOS. I have also downloaded the correct RAID driver from the Gigabyte website and I load it when windows prompts me. Here is what's happening.
Everything good during windows install until it gets to completing installation part. Computer restarts as it says and then continues to install windows. Screen goes black and I lose power to mouse, keyboard and all usb ports. If it is my RAID array being incorrectly setup what would it be that I have done wrong? The BIOS seems very simple so I don't quite know how I would have made a mistake. The only thing I can think of is the stripe size part which I left at 128KB.
I have 4GB of ram in 4x1GB sticks which came in pairs. I put one pair in one colour slot and the other pair in the other colour slot. Could this be an issue? I haven't done anything with the ram in the BIOS. In the BIOS do I need SATA AHCI Mode enabled? It's currently disabled. I put my drives in the yellow SATAII0 and SATAII1 ports and my cd drive in the SATAII2 port. Is this correct?
My friend and I have been going back and forth about his computer for a while. When Vista is installed it runs fine. Its not until we add the ATI vista 64 drivers does the machine slow down to a crawl. Originally this was with an x1600xt so we upgraded to the hd2600xt. Same issue. Now comes the weird part. So we got our hands on a single core amd 64 3200+ cpu and put it in. Now the machine runs fine. Why would using a dual core processor slow the machine down significantly. He has set up a dual boot with xp 64 and it runs fine with the x2 processor.
View 5 Replies View RelatedI have 2 XP machines and 1 Vista machine. The Vista machine can access the XP machines (using a variety of methods), but the XP machines cannot access the Vista machine (in any way/shape/form). That includes "ping", file sharing, an HTTP server, anything. All computers are in the same workgroup and subnet.
View 4 Replies View RelatedI have a strange problem. I am running Vista Ultimate 32 bit dual boot with linux in a Toshiba Laptop. When computer successfully starts there is no problem in any OS. But the problem is to start vista. After working at night I turn off the machine and in the morning when I start, the vista roller icon just rolls, it can't proceed, sometimes it restarts saying that unmountable boot volume. But if I do a hard shutdown (by power button) and start again then machine starts as normally as if there is no problem at all and run all day smoothly (can stop and start multiple times). So it is the problem of starting machine first after several hours of last shutdown. And it is not a one-of problem, it is happening last several days.
Another point, when computer starts successfully it makes a click sound during the vista roller animation and then it starts, no click sound means it can't start. I have installed SP1 recently, the problem occurred even before that. There is another big problem is that I can't go back to XP as no XP (pro, pro+sp1, pro+sp2, pro+sp3, 64bit) can't be installed in my machine as none of them can find a hard drive although the machine came with XP preinstalled.