Alright i have a gateway laptop not too old at all. Running Vista home Prem. The back story is it froze and i hard reset it, upon restart it started to freeze on the green bar screen and wouldn't go past. Using a recovery partiton on the harddrive placed on there by gateway i attempted 3 times to restore the laptop to factory state, i got as far as the vista initial setup and it wouldnt go back to the desktop. Again it crashed doing the same green bar issues. Finally using a disc i found i deleted the partition and reinstalled vista, leaving the recovery section alone again. But it ran fine i thought i was in the good, so i started to try to get the drivers back, i installed the drivers for the webcam, touchpad, and video card. All were retrieved from the gateway support website. It crashed again the same green bar screen and not going past it. Now the issue, using F8 to get to the advanced boot screen none of the options do anything but send me back to the green bar starting the wait for nothing to happen again. i Also attempted to do a factory state repair with that recovery partition, but it sends me to the green bar. Same thing occurs wif i attempt to use the disc to just install vista, it prompts to press any key to load from cd/dvd i do so it says windows loading files loads for a good 3 mins, then just sends me to the green bar again. Also i cannot access the command prompt or i would attempt to delete the partition again. I cant figure out whats wrong and i know as far as ive gone would exceed what geek squad or most the the random computer repair shops could do. And seeing how its refusing to load a recovery from the vista cd/dvd i doubt anyone could get anywhere with it.
I haven't been able to start Windows past the green loading bar. The first couple of days when I tried to turn on the computer it would take me to an 'Error Start Up' screen where I would try to restart using safe mode or something.
Now though, it does the blue HP screen, then goes black with a grey loading bar that says "Loading Files" and then from there it goes to the green loading bar. This has happened to me once before, although, it was fixed in just a couple of days. I removed the main power cord and left it out for a day and when I tried again, it worked. I've tried doing that now, but no such luck......
I turned off my computer yesterday then turned it on again and switched it off again using the power switch repeatedly yesterday in a span of a few mins. I then went out for a day and when i came back home and tried to boot my computer again vista wouldnt load the login screen. I changed my loading screen and it gets past that alright but when it gets to the logon screen everything just turns black?
Everytime i enter to my user, the explorer.ese doesn't load but the document file loads. To enter to the user i use the task bar (i ctrl alt delet) then i nw task the explorer. This started happing after I was virused. i was able of removing the virus but i can't fix my computer. I think maybe on of the seeting was deleted from the system 32. I tried a lot of stuff but i counldn't fix th problem. I even tried creating a bat file that starts the explorer everytime but i failled, cause it will start when the account starts not before.
Starting today I tried to turn on my pc and I get the startup repair screen. It does a quick scan and says "windows cannot repair this computer automatically". It gives me the option to send the info to Microsoft or don't send, I tried both and both take to an option to finish or cancel. Finish shuts down the pc and cancel restarts. This seems like a never ending cycle, I cannot get to the desktop to use my computer.
My girlfriend said she would notice microsoft office would uninstall randomly which has never happened before, and we also keep our pc on at night and she said it recently started turning off itself. She thinks it may have started when we started putting music onto our mytouch phones with the usb wire and we charge our phones while it stays connected to the of. I'm not sure what to do. Also Im not sure of which uptdates were installed since they are automatically done.Here is a list of the problem details it gives m after the short startup repair:
I just put some more memory in my computer and now cant get past boot bios screen as I cant use keyboard to go past but I am guessing as usb is not active at this point keyboard or mouse does not work
I had used my laptop(link below) just fine in the am then when I try to sign-in in the pm it won't go past the login screen and will auto restart and again to the login screen so it becomes a vicious cycle. I have tried starting in safe mode then system restore, no luck, back to safe mode and got this error: The Recycle Bin on drive c: is corrupt or invalid. Do you want to empty ..., then tried: load thelast known good configuration, again no good.
My pc wont boot up past the loading bar. the bar scrolls through twice then it stops in the middle for about 2 secs then it scrolls twice or so more and then disapears and nothing else happens. just a black screen. I can boot into safe mode, I have restored the system to yesterday before I installed new graphics card drivers and I have uninstalled the last program I installed.
I have an HP dv6000. I was using the computer today and it was fine and I did not download anything today. When I went to turn it on tonight it goes to the HP screen where in the bottom right hand corner I can pressesc for boot order settings for F10 for setup. Than it shuts off and does the same thing again. I try to press F8 but it's like it wont allow it, I can press F10 to get into setup but when I press F8 there is a loud beep. It seems like there is a light ticking coming from the bottom part of the lap top, about every 5 seconds i hear a light tick. I tried to reset to the default settings. take the battery out, and all of that.
There has been a lot of news about a new technique to extend the activation period of Windows Vista past 180 days. It all started when Brian Livingston posted a story on his site, WindowsSecrets.com, about a registry key that can be modified to allow the slmgr -rearm command to be run more than three times. This allows you to use Windows Vista without having to activate it for longer than 180 days. Activation has always been more of burden for licensed Windows users than an effective deterrent for piracy. There are already many cracks for Windows Vista that bypass activation completely. The end result is a bad experience for those that legally buy the product.
For me, this is an issue that I am always fighting with. I am constantly building, installing and re-configuring my two computers with multiple vista virtual machines. I don't want to deal with the burden of having to activate my legal copies of Windows Vista every time since none of my workstations seem to last for more than a few months before I reinstall. If I actually activated my Vista Ultimate licenses every time I reinstall I would already have to use the slow phone based system where you have to type in that super long code. Sorry Microsoft, that is a horrible experience that I'm trying to avoid.
Using Brian's registry key and the old 180 day trick, it is possible to setup Task Scheduler to automate these changes to extend the period before you need to activate beyond 180 days. Follow these steps to automate the registry change and activation reset using Task Scheduler:
Click on the Start Button, type in Task Manager and hit Enter....
I downloaded my video from my camera and tried to view it through media centre and media player but it came out in the green negative. Our windows is vista 32 bit. Tried to download updates but came up with messages of not enough space - due to wrong download - was for xp. Then did the update for vista and said it wasnt applicable for the computer. Can you help me please. The computer always did it as it is only a few months old and the graphics card is an Asus EAH4650 and we have done all the updates for it just recently.
A few days ago my display settings would not save and each time I restarted my computer they were different. I thought it would not get any worse however now when i start my computer the screen goes black just after the green loading bar. The computer is still on because it makes hard drive noises and my quickplay buttons are blue but the computer does not respond. It starts in safemode but it won't start normally. I have Vista Home Premium 32 Bit with Service Pack 1. Any help would be greatly appreciated to get rid of this black screen.
Wondering if anyone has a suggestion. When importing a DVR-MS file recorded using Windows Media Center into Windows Movie Maker, in order to convert it to a more compact WMV file, a green screen shows up in the preview pane on the right-hand side. The audio works -- but only green shows.
It's strange because the DVR-MS file plays fine within Windows Media Center.
System is a Dell XPS 410 running an ATI Radeon x1600 pro with the latest Certified driver from Windows Update (8.391.0.0 dated 6/26/2007).
There is a later driver available from ATI, 8.9, but before taking the risk up upgrading the driver, wonder if there's another setting that may be causing the green screen?
I have a compaq presario SR5310F w/ vista home premium 32 bit 08 model. Was working perfectly for two days after being stored 18 months. suddenly it now boots up to a green tint screen with faint, hardly readable characters.
The little blue circle start button, i want to change the color of that to green instead of blue, and the taskbar i want to change to a silver, like how it was in the XP Theme "Silver", i've read elsewhere that there is no XP Theme which i dont want, i just want to change the colors to green and silver, not blue and black, is there anyway i can do this?
I'll admit it. First of all the specs: Gateway GM5664 desktop computer running Vista Home Premium 32bit. AMD Phenom 9600 quad core processor BluRay/HDDVD player ATI Radeon HD 3650 1gb graphics card (which I just upgraded to.) 46" Samsung 1080p LCD HDTV (yeah, I know, using a TV as a monitor, maybe that's the issue.) Resolution is set at 1920x1080 I have updated the drivers to ATI's newest available. My display issues are as follows. Basically, my display seems to be pixellated on the login screen. At the vista login screen I can see blocks where it transitions from blue to green. The display doesn't look very "crisp" or "clear" like it does on my IBM laptop (set at 1400x1050) with a 64mb graphics card. Say in Firefox along my bookmarks toolbar, there is some haloing around the text. Also, some text seems blocky instead of smooth, even though cleartype is enabled.
I have a mobile intel r 965 express chipset family When ever i start the game the video playes perfectly and then the start menu comes up but there are no buttons and the picture is green, what do i do?
Vista 64 installed fine however it will give a bsod when booting. The strange thing is it happens at the exact same spot every time. While booting the first low res green bar appears the slides left to right. THen the screen goes black. Instead of displaying the vista logo in the middle I see a bsod flash up and the system reboots. After a few goes it will boot properly and then run fine for hours. I've tried 2 different sets of RAM and both do the same thing. If I go down to 2gb it seems to be fine. I've seen the other thread, but its over 60 pages long!
The windows explorer green progress bar has become a real big drag on my system. I have the ultimate on destops and a laptop. I have been using the laptop mostly and the folder exploring has alomost become a nightmare. The laptop has enough power (2Hz Intel CPU and 2G memory) and I definetely don't think that is an issue here. Every clik on a folder triggers whatever is indicated by the progress bar. It is almost like a search. If I were click on one immediately following by another one and so on, the bar starts up all over again. I have turned off indexing and I don't remember something else. It is like OCD, because everytime vista seems to take slowest possible route to the destination.
I've recently got attacked by some sort of virus malware and my AVG instantly asked me to reboot. After I rebooted and loaded the green loading bar, my entire screen turned black without the windows badge.When I clicked on the restart button, I'm able to get inside safe mode, network and command prompt but not start windows normally.. I've also tried chkdsk command but it showed 0 bad file.
my husband's computer won't boot at all. The green light comes on but the hard drive just beeps. It looks at the cd drive but that is it. Is there anything I can do to fix this. I don't have any recovery disks.
my problem being stuck at the blue/green screen while making a new fresh install.) Well I first signed up because I have was having install problems. When it got to the blue/green screen it wouldnt do anything. But what do u know.. right when I was typing this it starts to load and Im now on my way installing windows vista 64 bit! (cause I just recently bought 8gb of memory) Well... I guess I would explain my story since Im a newbie... and something for you guys to read.. Well my computer really needed a new HDD because for some reason my old one would always get curupted after like so many months... about 2-3 months? I was wow **** this. I wasnt sure why it was doing this. But my computer was only on a surge so I think maybe a couple power outages ****ed it up. (I already fixed that problem though, just bought a battery from newegg.com, when I bought more things, like my new hdd, memory, mouse and mouse pad.)
so finally my memory and windows vista x64 bit dvd came into the mail. As soon as I got em... I installed the memory then I wanted to upgrade my version of windows xp 32bit (I must say a really good OS at the moment, till when windows 7 comes out) So I tried just throwing in the cd and found out I couldnt upgrade that way. Because I got an error that said "somethin, cant remember the full message but bascially because I couldnt run 64bit dvd when I have 32bit" so no biggie right? Then I was like ok well I can just install it by booting up. I got passed the part that said "Now loading windows vista files" alright not bad... so far so good. But damn I was wrong when I got to the blue/green background. I noticed the dvd wasn't spinning my computer was just sitting there. It was frozen though since I could still move the mouse. So I was like oh man... cmon vista... Well I waited a little bit not to much though cause I think it should just pop up and start working. It wasnt doing that so I knew something was wrong......
HP Laptop running Ultimate....Everything was fine yesterday - attempted to load a .cue file with MagicISO and computer froze.. no biggie went to restart - got the loading shot (green night rider bar) and then black screen of death. Restart - tried all safe modes but will not pass crcdisk.sys..... Attemoted to start from dvd - finally got that working - Go in to repair mode - it finds Vista on by C: parition - scans for problems but can't fix them.. Try system restore - says there are none - which isn't true...tried the command prompt and did bootrec /fixmbr and /fixboot still no change..... I even attempted to do a clean upgrade over the old one, but of course the upgrade option is grayed out...
Last night my pc was running fine and just before I went for some shut eye put my pc into sleep mode today I woke my pc only for it not to allow me to log on, mouse movement only nothing was clickable so after a short while I decided to reset upon boot I got the green loading bar but then a black screen after about 20 mins I gave up and tried a restore last good config.... Yeah nice one it bsod on me At 55% chkdsk and now I get a windows boot manager error file: ootcd
I tried Bootrec /RebuildBcd but it brings back an error that it can not create the new file as the file already exists. I'm not having much luck with the recovery disk for repair options as it can't seem to find the OS and brings back errors of can not recover everything seems on a go slow and ubuntu can't find my c drive even tried spin right and that can't recover a bad sector I'm at a loss as to what to do befor the fresh install option I'm on my last option to try use a back up store disk
I got Vista 32 bit installed on my laptop. I work from Internet And need a good firewall and security suite which can protect my computer from trojen and malewars and hackers. Currently i am using kaspersky as my internet security and in past i have used Norton Security suite, In Both I have noticed getting too much of hacking attempts 3/hr.
Once vista boots from the cd it goes to a windows is setting up files,then goes to a black screen where there is a lilttle green bar moving. Now right after that it goes to a blueish screen where there is just the mouse cursor on the screen and just stays there? This is on all new hardware. Also this is a sata hard drive,
Just trying to startup my laptop but all it is doing is showing the green bar going forward and nothing else happens, I can boot into safe mode ok and have also tried last known good config and booted from the Vista disk to do a restore, but still doesn't work. I have also gone into msconfig and disable all non microsoft services and everything in startup.
Since getting the new machine, I have had continuing problems with keeping my extra dvd drive and HDDs operating (Code 43). After getting that solved I started experiencing problems with the HDDs not starting (Code 10). The dvd drive is always recognized, starts fine and stays running. Now my HDDs either will not start or aren't recognized. On the HDDs that don't start, I get a Code 10 error.....with a little more diagnostics I get an error message that Windows can load the driver software, but the software encounters a problem when trying to run. The driver is a Windows driver 6.0.6001.18000, not a third party driver.
I have extensively verified that ALL my hardware is Vista 64 bit compatible, is operating properly, all my drivers are up to date, all cables are tight, etc. In short, I have proven that this is not a hardware failure. I have even had one dvd and one HDD connected (on different Oxford boards) and operating correctly, but after an overnight reboot, the HDDs cannot be started because of the driver software problem.
The drive manufacturer, Western Digital, refuses to support EIDE drives connected via bridsgeboards to Firewire. The computer manufactuerer (HP) is equally clueless and their Tech Support doesn't even seem to understand the problem. They cop-out by saying it's a Microsft problem. And because Vista is pre-loaded, I don't have OEM disks to try a clean install....I can only do a System Restore.
When I start my laptop up, just normally, I log in. I have that thing where I have to log in using a username and password, something that I downloaded and put into my registry. Anyway, all the time, when I log in, it takes forever to load up, it just stays as welcome and doesnt load. I left it for half an hour and it still hadnt loaded! So, I turned it off and on again, and it worked. But, a couple of times, I had to turn it off and on about 5 times ,and when it didnt load, I had to start it again in safe mode. THEN it worked. But, I hate safe mode!
