'Configure UAC', MS The Value In Grannular Configuration?
Mar 23, 2008
Is there a way to grant an applicatoin the right to execute now and forever more? An app that I use 3,4,10,15 times a day triggers an UAC prompt. I understand that the app should be written in a different manner so that it does not need Admin rights. Until it is re-written, I do not want to be prompted __EVERY__ time i launch it. Is this possible?
Since I think I already know the answer (but I am wrong far more than I would like to admit which is why i am posting), Why not? and to answer the first 3 arguments against:
1) I don't care that the app should be written differently. It is not written differently now, and I need to run it now.
2) It's not really a security hole to whitelist an app(s) - UAC is still running. Firewall is still running. User is still a least priveledge account, etc.
3) i haven't thought far enough to have 3 counter arguments.
Can someone explain to MS the value in grannular configuration? 'Configure UAC' should have a few more options than Turn On / Off.
I am trying to configure a new paper size for my printer and it was very easy with XP, but when I try to do it in Vista all the properties appear disabled. (Printers->Printer Server Properties). With XP I can configure a new form, give it a name, write new sizes and save, but Vista do not let me do it.
I am unable to configure the windows mail.When I go to the tool menu and go to add an account the pop up window asks for the incomming and outgoing e mail server Which am not sure what to type.
After a couple weeks of pulling my hair out and threatening to go find that hammer, I found this site and the 200+ Tutorials. Below are the steps I took to get to a stable, working Vista Home Premium 32 bit. There is no new information here. Everything came from the tutorials and threads I read here before starting.
1. I made a backup of everything I wanted to save. Fortunately, most of my files were already on DVD’s from the old computer. I burned my Anti Virus, Anti Spyware and all the device driver updates I had downloaded during the ‘Insanity Times’. I also downloaded several of the Tutorials so that I could access to them without an Internet connection. I then unplugged my Internet connection. I used the recovery feature to reset the computer to its original factory installation.
2. After reboot, I did steps one and two from here: Speed Up the Performance of Vista
3. I next installed my Anti Virus & Anti Spyware. When setting up the AV, I set real time protection on and email scanning off. The Anti Spyware doesn’t load at start up as I let Windows Defender do the real time scanning. When installing programs I right click and choose ‘Run as Administrator’ rather than just clicking on the setup file. Some suggestions for anti virus and anti spyware here: Free Software List for Vista
4. I then rebooted. While the computer was shutting down to reboot, I plugged the Internet connection back in......................
Just got a new laptop and trying to get my invoicing program up and running again. The computer keeps telling me that it could not configure pdf driver(Error: -8). Is this a Vista issue or other and if other, could someone please point me in the right direction?
I can not configure windows mail. This is what I receive when I try to send mail. The connection to the server has failed. Subject 'lost code', Account: 'pop.tds.net', Server: 'smtp.tds.net', Protocol: SMTP, Port: 15, Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E. Do you kind folks need any additional info?
I have a Linksys wireless router, but I don't know how to find the IP address to configure it. I've had it for a few years now and can't find the documentation, but I changed the IP address from the standard one they always use. How can I find what it is?
I recently bought an HP HDX9000 laptop and it came with vista home premium edition. I installed Office 2007 Enterprise Edition and everything was working fine until Microsoft Update did something and now EVERY TIME i open ANY Office program it loads a window with a progress bar that reads "Please wait while windows configures Microsoft Office Enterprise 2007" that takes FOREVER to load!
I'm just finishing to configure my Media Center user on the Ultimate x64, now i wanted to know how to configure the Media Center for him allready atart in the "Only Media" mode!
I am trying to install vista on my computer but i get that error. My installation process hasnt been smooth so far! What happens is that when i install vista (from usb) It restarts the first time, then it displays the message "vista is starting up for the first time or something" then I go to the next stage but there I get the error in my title. In my bios (DELL) i have only one option to change the harddrive from ATA to AHCI (or vice versa) and that is it and I have tried both options & same error.
i tried a clean install of windows vista ultimate on my vista home premium laptop. i deleted the old partitions and set it to install everything goes fine until "completing installation" when it says windows cant configure some softwar. so now i have no backup or restore points and i have no operating system.
Im looking for information regarding the best way to configure a dual boot system using Vista Ultimate and XpPro. What is the best way to set up the two 320gig 7200rpm HHD's? Should both hard drive areas be combined and then partitioned or would you recommend one operating system per drive? OS are Vistax64 and XpPro.
This is a question about both xp and vista to a lesser extent. I can't find the proper english group for xp netowrking in the newsgroup list so I am posting here. I have 6 workstaions. a mix of xp and vista. I am hoping that I can configure the vista machines in the same way I am doing xp. This is a workgroup environment not a AD. Let us say the 6 workstations are
1) alice (xp) 2) john (xp).....
Lets look at alice. What I have done is to create 5 user accounts (limited) on alice called john, mary, jack, roger and morgan. I have set their password all to network. ****QUESTION****: In order to share a folder(s) to these other 5 workstaions do I have to manually set up each user on the alice machine or is there a way to see these users of the other machines listed in the share permissons and just select them without having to set up physical accounts for them on the alice machine....
I have a Vista laptop and a new Vista desktop (replacement for a dinosaur). I am going to continue to reuse my current desktop monitor. Question: Can I configure my Vista laptop screen to act as a monitor for the new desktop (just to set it up)?
I have a new system with the new Core i7 920 CPU (don't know if this matters :p) and with 6 GB DDR3 RAM (1333Mhz 6x1BG) running Vista Business SP1 x64. I intend to disable the pagefile completely and to use a dedicated USB Flash Drive for ReadyBoost.
- What size should this USB Flash Drive have? -I read somewhere that it should be a 2.5:1 ratio (in my case 15GB then) for high-end systems. Is that right? - Do I have to configure the device on every Windows Boot again, so ReadyBoost is going to use it?
I am trying to configure Vista to perform daily backups. It does a full backup then incremental backups. Is there a way to configure full backups daily?
I have done this many times with XP Pro. Two entirely different hard drives. Make a dynamic file by file copy of C to D, then configure the boot menu to boot to either one. So, if C should die, boot to identical D. Has saved me and business clents many times. But alas, whatever is used as bootini in Vista seems a bit more difficult. If I have two identical hard drives with the same vista OS, how do I configure the bootini menu to boot to either one?
My HP computer came with XP and an FM tuner. I was able to use media center to listen to over-the-air local FM stations with a "T" shaped antenna connected to the computer's FM connector. I have since upgraded to Vista Home Premium and more recently to Windows 7 Home Premium. I have been unable to configure Windows Media Center with either of these OSs to recognize the FM tuner. The 'Device Drivers' window shows I have the latest version of a "Hauppauge winTV HVR-1800(Model 78xxx, Combo ATSC/QAM)" sound driver. Am I doing something wrong? Or missing something? Is there ANY other program (or driver) that will connect to this tuner?
needs to use a 120 dpi configuration but i really dislike it, i need more space in the screen. Need any way i can have 2 dpi configurations on the same computer one for his user account and one for mine.
I just configured Vista's Windows mail to hook up with my gmail account via IMAP. I have my emails stored in a folder structure (gmail calls them "labels"), which was recreated and all the emails downloaded. So far, so good. But then WinMail downloaded all 1700 emails again in the All Mail folder. I bought a small SDD drive for my new machine and do not want all the emails stored locally twice. How do I configure WinMail to synchronize my folders, but not the All Mail folder, and then I can delete the All Mail folder? Or are there any other options I can use?
I subscribed to several newsgroups and retrieved the posts locally. It seems Windows Mail onlly retrieves part of the newsgroup posts. I cannot seem to find where I may configure to make it display all the posts which I can see via Web page. For example, I cannot see posts earlier than August, 2008.
My pc was configured in raid5 but I lost all the data. Since then I decided to go back to the classic drive C,D,E each by themselves. The point is that things are going slow / sometimes I try to access drive D with music and there is a significant latency in the hdd response. I can even hear the sleepy drive waking up. I might want to aim to high but here is what I dream to do.
1. I want to go back to a raid configuration in which all those hdd(i have 3x 500 sata) to work hard for me. 2. Find a way to add the fourth one in which to save important data. I case of crash to reinstall vista and all the soft without losing all my projects. I am doing video editing.
My motherboard has a sata external connector. What would you guys do with this configuration in order to set up a raid. Don t tell me trash it 'cause i won t. I paid more than 4000 bucks last year. Today might value less than 2000 ( hurts so bad). This is another reason I want to squeeze as much as possible from what I have.......
I am having trouble with the email configuration. I have a wireless connection with a signal booster (ssid: free the net). I don't have an ISP as I don't need one to access the internet.
How can Vista (no router) be configured not to use TCP/IP as transport protocol for NetBIOS, SMB and RPC, thus leaving TCP/UDP ports 135,137-139 and 445 closed.The best to my understanding is that Seconfig works with WinXP only.
Since there are no Windows 7 newsgroups I hope my post is appropriate here. If not, please let me know where I should post Win7 questions. I have a new Dell netbook running Windows 7 Starter Edition. I need to configure a hard wired network connection using a static IP address and I can not find where to do so. What I am looking for is the equivalent of Control Panel | Network Connections in XP.
This message is in regards to the Wireless Zero Configuration not being fixed in SP1. This is a serious issue for multiplayer gaming enthusiasts who play wirelessly. This system causes a lag spike in games that lasts between 1-3 seconds and reoccurs EVERY 60 SECONDS. This is unacceptable! This makes playing games over a wireless connection completely unbearable!
The problem goes like this. Every 60 seconds, via Wlan autoconfig (WZC), my computer (and ANY computer using Vista and wireless connection) attempts to find the best connection. During this time period, if you're doing something intensive with your connection such as playing a game, the connection spikes and causes an intermission between your game and the server you're playing on because your connection is being temporarily interrupted. There are no options to stop WZC from doing this. Manually disabling Wlan autoconfig causes you to be shut out from connecting to the internet at all........
i'm having problems starting up my windows vista.. when i turn my laptop on there's a screen that comes up showing "configuration updates: stage 3 of 3 - 0% complete" and after a couple of seconds my computer shuts down, restarts and does the process all over continuously with no option of cancelling this process....
With Windows XP, when you ran msconfig, and rebooted, you got that box with the message about how your settings have changed, and at the bottom there was a checkbox that said something to the extent of "Do not show this message at startup".
With Vista, when you run msconfig and reboot, Windows Defender comes up and gives you a message something to the extent of "Some programs have been blocked, click here to see which programs or choose to unblock them".
But now there's no easy, evident way to not make that message seen at startup.
