The IP address of your computer can be set from the command prompt by running the following commands at an administrative level prompt:
netsh interface ip set address name="Local Area Connection" static 123.123.123.123 255.255.255.0 123.123.123.1 1
Local Area Connection is the name of the adapter you want to modify. In single NIC systems it is normally called Local Area Connection....
I am writing to this Forum in desperation because I cannot find any way to get in touch by email with Windows Live OneCare even though I am a paid subscriber. I have NOT had a good experience of MS tech support. After 18 months of endless problems with Windows VISTA Ultimate Edition V 6001 I now wish to reformat my computer and get RID of it altogether, replacing it with System 7 for which I have a serial number and a beta download from the recent Microsoft online download offer.
As VISTA seems to have eleminated DOS altogether and the old FDisk command doesn't work from a command line start, I have tried to reformat from my OEM Vista Ultimate Edition re-installation DVD which I am certain used to offer me reformat and partitioin delete as the first options but that no longer seems to offer me any reformat option at all and not only instists only on re-installing VISTA (which I no longer want) but leaves the old installation in a directory renamed "WindowsOld" which VISTA will then not allow me to delete....
I'm having trouble with the REN command with wild cards as used from the command prompt. For example, in the REN command help, it says: "For example, if you had files that are named smitha.doc, smithb.doc, and smithc.doc, you could use the ren smith*.doc smythe*.doc command. All file names automatically show the new spelling, and are renamed smythea.doc, smytheb.doc, and smythec.doc.".........
View 5 Replies View RelatedI have a Linksys wireless router, but I don't know how to find the IP address to configure it. I've had it for a few years now and can't find the documentation, but I changed the IP address from the standard one they always use. How can I find what it is?
View 6 Replies View RelatedI'm after a program that will log exactly what my computer is doing and how, so if i open a program it will show me "start devmgmt.msc" for when device manager is opened, or something like that, as I am into doing my little batch files (as we all do ) - Does anyone know if a piece of software exists?
View 5 Replies View RelatedI'm looking for a native x64 command line tool that can display the amount of free RAM. It has to be a true x64 tool. Does anyone know one? My google searches brought up nothing.
Edit: I finally found what I was looking for. RamStatus is the tool that helped me out.
What can I put in Windows Explorer's command line to enable me to view all of my hard drives when it initially opens?
View 9 Replies View RelatedI use a program called "Texmod" for a number of games to modify their textures. One game I am recently playing, however, requires that a command line switch be used to run the game client exe directly. Texmod doesn't support command line switching through it's own, so the game client refuses to work. Is there anyway (via Windows options or a third-party application) I can embed/hardcode the command line switch into the exe permanatly, so if the exe is ran, it'll always force load the command line switch?
View 6 Replies View RelatedI've read the Help file in BGInfo - but can't figure out how to use Command Line Parameters. When I click on my startup icon, I would like to invoke certain parameters. The line I came up with is: "C:Program FilesBGInfoBgInfoBginfo.exe /timer:99 /popup /taskbar /rtf:C:DATABGINFO /nolicprompt" Obviously, this is wrong. My Target line reads: "C:Program FilesBGInfoBgInfoBginfo.exe". My Start in line reads: "C:Program FilesBGInfoBgInfo"
what, exactly, should go in each line. I would also like to add lines of information to BGInfo - but that question will come after I get the above working.
I bought an Acer Aspire 6530 last week. I noticed whenever I go to the GUI disk defragmenter (My Computer>Right click C:>Properties>Tools>Degfragmentation) that it ALWAYS says I need to defrag the drive even after I did did one. But when I do the command line defrag (Start>All Programs>Accessories, says I don't need to. This happens everytime even after I run the defragmenter. So why does
the GUI one says I need to while the command line one says I dont. Isnt the GUI and Command Line one basically the same?
I messed with the ownership and permission settings of my windows directory and now, even the system doesnt have permission to access the files...so vista doesnt start up... is there a way to open command prompt without starting up vista and use the icacls command to restore the permissions?Also, if i use my vista boot cd and repair my vista installation, will it delete my files?
View 4 Replies View RelatedIs there a way to set UAC to capture or log the entire command line of a program including all switches that is requesting elevation? I have an unknown potentially suspicious program that is requesting elevation and I am unable to see the entire command line or path to the binary to investigate it. To be safe, I have declined running the program, and briefly examined the Windows event logs but have not been able to find the details I am looking for.
As a temporary work-around, I am going to connect via remote desktop to take a screenshot of the UAC prompt, but this only gives me part of the command since the display dialog cuts of the text.
Internet Explorer has a few useful and cool command line arguments that may help you depending on how you use your computer:
Start IE7 and go to a specific website ....
Since there are no Windows 7 newsgroups I hope my post is appropriate here. If not, please let me know where I should post Win7 questions. I have a new Dell netbook running Windows 7 Starter Edition. I need to configure a hard wired network connection using a static IP address and I can not find where to do so. What I am looking for is the equivalent of Control Panel | Network Connections in XP.
View 6 Replies View RelatedView Details:
Problem signature
Problem Event Name: MpTelemetry
Problem Signature 01: 8024402c
Problem Signature 02: EndSearch
Problem Signature 03: Search
Problem Signature 04: 1.1.1505.0
Problem Signature 05: MpSigDwn.dll
Problem Signature 06: 1.1.1505.0
Problem Signature 07: Windows Defender
OS Version: 6.0.6000.2.0.0.768.2
Locale ID: 7177
I tried the following fix:
1. Open Internet Explorer.
2. On the Tools menu, click Internet Options.
3. Click the Connections tab, click LAN Settings, and then click Advance.
4. Delete any entry in the Exceptions section.
5. Quit Internet Explorer.
6. Click Start, click Run, type cmd, and then click OK.
7. Type the following commands. Press ENTER after each command.
o proxycfg -d
o net stop wuauserv
o net start wuauserv
[No's 5 through 7 - Where is 'Run'?]
but came unstuck as follows: On clicking LAN settings - advanced is greyed out. I tried ticking the Use a proxy server ... and clicked advanced but was then asked for settings.........
When I enter the first letters of an email recipient's name, a selection of possible recipients appears in a box beneath the To: line. I appreciate this feature, but I would like to eliminate one of these alternative recipients, which is not even in my contacts list. How do I eliminate this unwanted recipient's address? Perhaps this box that ppears is simply a history of sent/received emails beginning with that particular letter -- if so, how do I edit this history?
View 7 Replies View RelatedOur company has a 16bit command line application that works fine under XP and was working fine under Vista until, we believe, service pack 1 was installed. The program works initially to accept keyboard input but seems to ignore any keyboard input after a few minutes of the PC being left with no activity. We have tested this on Windows Vista and Windows 7 and have exactly the same issue. We have created a very basic program that would allow you to type characters and exit when Enter is pressed. I have narrowed the time delay before the program freezes down to about 4 minutes of inactivity. This will cause the program to not respond to any key presses on the keyboard and has to be closed by clicking on the x in the top right corner.
I am wondering if anyone else is having this issue and also if there is a fix for this? (Perhaps a registry key timeout setting?) Below is a copy of the source code we used for our simple program. The program is written in Microsoft C version 5. We are using an Int 16h Function 00h BIOS call to read the keyboard character.
I've been getting this error message when I try to open certain control panel functions from the RUN command line or through the MMC console itself. Other functions like performance information, user accounts and parental controls don't respond when clicked. Windows update might flash up the beginnings of a window for a split second but wont load. I've got the update icon on my task bar saying it cant update. Other than some key function being inaccessible the PC runs fine (apart form Firefox has started crashing out every now again) I can install software ok.
I've run the SVG /scannow thing and it found no problem Its my home PC sp I am setup as administrator. This problem is effecting another vanilla admin account AND the hidden Admin account. I've virus scanned in safe mode. System restore went through the motions but after it had restarted the PC it said it couldn't actually restore........
Can anyone explain this: 3219. The screenshot shows the folder view (in Windows Explorer), and a directory listing (in a Command Line window). Why is the Explorer window showing different filenames than the command line window? It's not so much of an issue, as I'm currently completing a scheduled backup of this drive using Nero Burning ROM, and will be formatting it soon.
View 5 Replies View RelatedI've been trying to figure out how to make a command prompt run a command line as soon as the box comes up.
I need this to happen all from one command line. A command prompt needs to open with "echo hi" being ran as a command line.
Been trying for hours to use Xbox 360 to access music and other files on my compuer, using both Drive address and network address. ALL files can be seen successfully on WMC on the Vista computer but nothing on the Xbox 360 -- except some photos on my son's XP machine (that worked easily).Could really use a simple solution to this please!
View 5 Replies View RelatedAll of a sudden when I try to open attachments I get "The Command Failed To Execute" I hate Vista it gets worse and worse. They must have expected big problems as they uped their charges for help and when it crashes it now says do you want to return to your orginial site?
View 9 Replies View Relatedin Window XP, i used to be able to select full address to be displayed in the address bar. But for Window Vista, I could not find the way to do it. e.g. instead of showing D:Document, i want to show \sapsgsmapsnap01document. I want to send the link to my colleague to access directly to destination folder.
View 9 Replies View RelatedWhenever i create a new email by click "To" to open up my address book for selecting any email address, or when i use "reply all" and want to add in some more email address from the address book, the computer start to run and till it stuck, so the only choice for me is to end this task and type email address instead of selecting email address from address book.
i thought that this is because i got too many email address, thus i deleted most of it and now only got 700 email address inside my address book, i just can not understand that when outlook express can take more than 3000 email address book, but windows mail can not take about 700 email address book. And somemore, this email address book is just useless for me, because whenever i want to use the address book, the windows mail is going to hang... and the only choice is to go to task manager, end this task and restart my windows mail.
I am trying to configure a new paper size for my printer and it was very easy with XP, but when I try to do it in Vista all the properties appear disabled. (Printers->Printer Server Properties). With XP I can configure a new form, give it a name, write new sizes and save, but Vista do not let me do it.
View 4 Replies View RelatedNeed directions to remove a former friend's email address from my address bar. Whenever I create a message to someone with an address starting with the same first letter, his email address also shows up.
View 5 Replies View RelatedI am unable to configure the windows mail.When I go to the tool menu and go
to add an account the pop up window asks for the incomming and outgoing e
mail server Which am not sure what to type.
After a couple weeks of pulling my hair out and threatening to go find that hammer, I found this site and the 200+ Tutorials. Below are the steps I took to get to a stable, working Vista Home Premium 32 bit. There is no new information here. Everything came from the tutorials and threads I read here before starting.
1. I made a backup of everything I wanted to save. Fortunately, most of my files were already on DVD’s from the old computer. I burned my Anti Virus, Anti Spyware and all the device driver updates I had downloaded during the ‘Insanity Times’. I also downloaded several of the Tutorials so that I could access to them without an Internet connection. I then unplugged my Internet connection. I used the recovery feature to reset the computer to its original factory installation.
2. After reboot, I did steps one and two from here: Speed Up the Performance of Vista
3. I next installed my Anti Virus & Anti Spyware. When setting up the AV, I set real time protection on and email scanning off. The Anti Spyware doesn’t load at start up as I let Windows Defender do the real time scanning. When installing programs I right click and choose ‘Run as Administrator’ rather than just clicking on the setup file. Some suggestions for anti virus and anti spyware here: Free Software List for Vista
4. I then rebooted. While the computer was shutting down to reboot, I plugged the Internet connection back in......................
Just got a new laptop and trying to get my invoicing program up and running again. The computer keeps telling me that it could not configure pdf driver(Error: -8). Is this a Vista issue or other and if other, could someone please point me in the right direction?
View 8 Replies View RelatedHow do I configure Live Mail to work ? I don't see any options to change.
View 7 Replies View RelatedIs there a way to grant an applicatoin the right to execute now and forever more? An app that I use 3,4,10,15 times a day triggers an UAC prompt. I understand that the app should be written in a different manner so that it does not need Admin rights. Until it is re-written, I do not want to be prompted __EVERY__ time i launch it. Is this possible?
Since I think I already know the answer (but I am wrong far more than I would like to admit which is why i am posting), Why not? and to answer the first 3 arguments against:
1) I don't care that the app should be written differently. It is not written differently now, and I need to run it now.
2) It's not really a security hole to whitelist an app(s) - UAC is still running. Firewall is still running. User is still a least priveledge account, etc.
3) i haven't thought far enough to have 3 counter arguments.
Can someone explain to MS the value in grannular configuration? 'Configure UAC' should have a few more options than Turn On / Off.