Won't Load Past Logon Screen - Cannot Setup To Type Regedit
Jun 12, 2008
I loaded Keperksy virus programme from PC user disc and the next time I turned my lapptop on it loaded and came up to a logon screen for windows xp. I have never had this screen come up before in the 4 years that I have owned it. I have tried escape, enter, all the passwords that I use and noting has worked. I have tried all the usernames and even the previous persons username and all I can get is the desktop screen with no icons on it, if you know what I mean. I downloaded boot discs and can load to the A: prompt, I can change this to C: and even Windows but the only command that seems to work is Dir. how to get my PC back to normal. I have tried to boot using F8 in safemode but when it loads it goes to the logon screen. It loads Windows for about 10 seconds and then logs out. I have no original discs for using to reload windows xp. It is the Kaspersky programme that has altered something. I cannot get into my PC setup to type regedit at the run command.
View 3 Replies
ADVERTISEMENT
Apr 20, 2005
How can I get past the logon message screen when it is asking for a password
and I have never had a password. I did a Window-Washer and rebooted and it
is saying I need a password to get in.
View 2 Replies
View Related
Mar 18, 2007
MAJOR problem trying to install windows XP pro. After rebooting I keep getting to the same screen the "welcome to setup" screen, where I hit ENTER , F8 at the EULA, then I see the partition list.At this point regardless of if I hit ENTER for the selected partition, or delete and recreate the partition (and reformat to NTFS), it loads files from CD, then reboots and takes me back to the same screen.
View 7 Replies
View Related
May 16, 2007
The PC is now over a year old and has been running fine for about a year.
AMD 3500+939GT4- SLI-G Mobo
2 GB Twinmoss Ram200 Sata HD DVD 6600GT Sli Pixel View Graphics PCIe Super Flower 500 Watt PSU.
Now about 6 months ago, I started to get the Nvidia card sentinal saying the Graphics Card isnt getting enough power and will reduce its performance to prevent any damage. I checked it all out and it appear to be fine so pretty much ignore the issue.
View 4 Replies
View Related
Jun 6, 2010
Turned the computer on today and Windows will not load, gets as far as the black Windows XP page with the loading scroll bar. Nothing happens beyond that. Everything was working fine yesterday and nothing was downloaded or installed to indicate where to start looking. Tried installing 1GB RAM last month to no avail and took it out. Things have been okay since. Have read some posts that suggest using the Windows install CD to repair whatever but I didn't get one with the computer only have the Windows recovery disk.
View 6 Replies
View Related
Dec 8, 2006
Everytime I boot up my computer I get a message that my computer had shut down for a safety reason, power failure, inproper shut down etc, so I am given theses options:
1.Start Normally
2.Start at last working configuration (setting that my cpu last worked properly)
3.Safe mode
3.safe mode with networking
4.safe mode & something else (sorry I forget exactly)
Currently, I have to disable the other computer so I can get online with this one, so I may not be exactly wording the messages given.........
View 4 Replies
View Related
May 23, 2008
My Medion PC running Windows XP loads past the windows loading screen then simply goes black but the computer is still on and the screen is still active. My dual boot of Ubuntu works perfectly as does safe mode. Ive had this issue for a while but it used to turn on after i rebooted it but now it only turns on occasionally. Also I'm almost certain its got nothing to do with my hardware.
View 4 Replies
View Related
Mar 19, 2008
I have XP Entertainment Home Edition. My system boots up to the user profile screen where I can choose between the two profiles If I select either profile a blank desktop appears (no icons/no windows task bar) and freezes Trying to boot into Safe Mode also hangs after choosing a profile. It's a Dell so I don't have the XP cds to try a repair. I do have other computers with different versions of XP installed that are working fine
View 2 Replies
View Related
Aug 22, 2005
I am running XP Home on a network with no other users.
I currently haveto use a password to logon. I dont want to have to do that.
I just want it to turn on and load to the desktop without having to go thru
the logon screen.
View 2 Replies
View Related
Dec 29, 2005
I have just installed a linksys wireless router onto my desktop computer to add a wireless laptop and for some reason, when the User Logon screen comes up. The hand cursor never becomes a cursor for me to type in passowords to user accounts. I went into safe mode and then into control panel and deleted the passwords for each user acct and now I can get into the accounts but how can I add the passwords again and be able to type them in. We have 3 user accounts on this pc and would like to have them password protected.
View 1 Replies
View Related
Feb 17, 2009
My computer was missing a system file after restarting one day. I inserted winxp disk to repair I would boot from it but the setup would wouldn't ever load anything. I reformatted with the Seagate disk and tried a different winxp disk to install same thing, it hangs at asking for third party adapter software. Any ideas?
Winxp, 160gig SATA seagate, 1gig of ram biostar mobo. It all worked fine until I lost that file now I cant even reload windows!
View 1 Replies
View Related
May 22, 2008
Just as the title says.I have 2 accounts on this computer, one limited and one admin (me), and I have the default WINXP logon type (with the screen and click ,etc..)
View 7 Replies
View Related
Dec 7, 2008
i have a samsung model p29 laptop but have a problem when i boot the machine i get to the log on page, input my pass word then it says loading personalized settings then it says logging off saving settings !!! i know i have 2 virus's 1 is a win32 privacy remover (found by kapersky )the other is associated with ad-aware but i can tell what it is as it boots too fast for me to read what it is:(.I have tried to boot in safe mode but it just dose the same as when i boot in normal mode i dont want to reformat the hdd as there are a lot of family pictures that i want to save
View 4 Replies
View Related
Jun 8, 2008
I can't get XP Pro to get past "Setup is starting Windows" ,to allow me to format.Loads all drivers up to that point,then the error in above post.Pressing F6 or F10 to install 3rd party(XFX MB drivers) has no effect,and Alt-F2 ultimately gives error also.S prompt is no joy also.Tried F8 for Safe Boot and no joy.Cleared CMOS several times.All drives are there in CMOS. All RAM (4 Gigs) is detected I raised Memory voltage to 1.9 volts standard for my ram),and raised FSB to 1600 Mhz from 1333 (standard also).Put timings to standard 7-7-7-24T Tried Memory linked/unlinked/Auto/1T/2T I Tried only 1 SATA drive,and 1 Gig of RAM with 1 DVD RW /2 drives and 2 Gig of RAM,I Enabled standard RAID for each and every drive and ultimately disabled them cause I want the XFX 790i ultra motherboard RAID Drivers.
View 6 Replies
View Related
Sep 22, 2004
My computer starts up normally.It always just autologs on since I'm the only one using my windows xp computer. However, before anything can be displayed it immediatley logs off to the logon screen. I click my username and start the login process (i have no password and before even switching to my wallpaper or anything it says stuff like logging out and saving your settings.
I tried booting in safe mode too and the same infinite logon loop occured to, even with the default administrator account. The last thing I remember doing before this happened is I was playing City of Heroes when it crashed forcing me to restart my computer. This happens occasionally in certain programs but I've never had anything like this happen before. I tried unplugging my keyboard, mouse, usb devices, ethernet cable, no luck. Intel Pentium 4 1.7 ghz Geforce 5600 FX 256 mb windows xp home service pack 1, in case any of that matters
View 10 Replies
View Related
Sep 10, 2005
My PC is currently setup with 3 different users with no passwords needed.
How would I change that so a password is needed to logon to XP.
I don't think admin is setup eithre.
View 3 Replies
View Related
Jun 7, 2005
When i boot up the system hangs at the blue 'Windows xp' screen, the 'Windows is starting' is missing and it goes no further, the logon screen does not appear so i can't get in. I have recovery console on and i can get into the drive by booting in from another drive/operating system
View 1 Replies
View Related
May 26, 2010
I can't get past the box that says"Logon User Interface Dll Msgina.dll failed to load. Contact your system administrator to replace the dll or restore the original dll."
Does any body know how to replace the original dll? I tried to run a system recovery on my laptop but I dont know the keys to use.
View 4 Replies
View Related
Jan 15, 2006
He is running xp pro and when we start the computer up this is the message we recieve - User interface failure. The logon user interface dll msgina.dll failed to load. Contact your system administrator to replace the DLL, or restore the original DLL. I found this at Microsoft.com http://support.microsoft.com/kb/836683/ and followed the instructions, but when we go to last known good configuration, we recieve the original message again. I've tried to boot in safe mode, and recieve the same message. I searched the forum and found similar cases, except that he does not have a recovery disc. He doesn't know whether the system restore was enabled.
View 7 Replies
View Related
Feb 17, 2006
I am running xp home edition sp2, here are some details about my motherboard and memory nd stuff off cpu/z Right now that out of the way the probelm is it takes about 20 seconds to logon to my user account and takes 10 seconds for the tasbar to load! i have canceled down some unused services, cleared my startup programs, run adaware and cleanup stuff etc nd nothing has worked!
View 3 Replies
View Related
Jun 28, 2007
so, a few years back i read a magazine that said to change the type of computer in device manager to standard pc because it made the computer run a little better or faster.so now i've got my laptop and i've noticed it getting slower and thought that i would do this... VERY BAD MOVE! i can still boot windows and everything - it meant that i had to let the computer reinstall all of the drivers for my hardware - but i have noticed in the device manager now that there are two instances of 'standard pc', there is also a new section titled 'other devices' with about 15 devices that seem to have no driver for them - some mention 'ISA' so i am guessing that changing to standard pc means that windows thinks my laptop is now a desktop pc with ISA slots? i find that when i put my laptop lid down the thing shuts down, when i press the power button it turns off straight away (doesn't even shut down!). i had had the laptop configured for ages to do nothing when i closed the lid and give me shut down options when i pressed the power button. i look in power options and i can only cinfigure the monitor screen and hard disk power off options - every other option is not available. when i do bring up the shut down options i can no longer choose standby.
i have also realised that i can not turn on my wireless connection - i've tried all sorts to get it to work with no avail! the laptop is an acer ferrari and when i call up the manager app it says that bluetooth and wireless are not present (by the way i can still get the bluetooth button to work - correction - it starts up with the button on but if i turn it off it won't let me turn it on again). the emanager and presentation manager buttons on the laptops casing don't work either (i have to access them via software route).
View 7 Replies
View Related
Sep 22, 2010
i want to install an application on my system, but the setup does not come in a good setup format. That is, when i click the file it normally ask me to select what i want to use to open the file, which is wrong for a setup. Please help me on what to do to my operating system
View 1 Replies
View Related
May 12, 2008
So I think I was affected by the SP3 update. I went out and got another harddrive to reinstall on since the other harddrive wouldn't even boot up. I can format the disc and the setup files load and then the system does the reboot. But after it reboots it ask me if I want to install XP and it takes me through the prompts of which drive I want to partition.
View 13 Replies
View Related
Feb 11, 2009
I?m trying to run a repair on my friends Compaq Presario 1245 but I have a strange problem. Every time I boot into setup, it will load the setup files and then just try to start windows up. The setup program will boot from the CD, load the drivers and whatnot, but instead of going into the actual setup process (where you can install a clean copy, repair etc), it just tries to boot to Windows automatically (Which doesn?t work).I've tried it even with a Windows 2003 CD and the same thing happens. I have went and reset the bios to their factory settings just in case for a session but that doesn't seem to be the problem (the CMOS battery is dead anyways). I was told the CMOS battery being dead might be the problem but its never really been and issue for me before when Ive worked on laptops (with dead CMOS batteries)
View 3 Replies
View Related
Mar 28, 2010
Basically every time I open any browser or any other applications, where you can type. I get this on the typing bar, screen: 000000.And I cannot stop it, if I try to press backspace it just keeps coming forward.I know it is not my keyboard, because I have unplugged my keyboard and it still does it, it might be a virus, but again I have kaspersky 2010 and it has not detected any viruses. My PC is quite old, it a dell, dimension 3100, windows XP.
View 11 Replies
View Related
Oct 28, 2008
its my previously-formatted HP Pavilion dv5201tx! The problem is as the title above. I can go into safe mode. I've used system restore twice. And in Documents and Settings folder I noticed it has:
Administrator
Administrator.computer description name
Administrator.computer description name.000
username1
username2
Is it creating more user folders? At some point Administrator.computer description name.000 wasn't there. Corrupted registry hive? I'm not sure! Restarted many times, used Last known good configuration, and it's still black after the boot screen. Please help!
View 4 Replies
View Related
Dec 21, 2007
I won't get past the Welcome Screen. I click on my Id and just says loading personal preferences. Right before that happened, I working on my comp. and just froze, so I turned it off and then when rebooting that happened. I have windows XP and haven't messed with the configuration settings, the only thing that I did notice was when I was changing my background picture, I guess that's when it froze. I have also tried starting it in safe mode, but the same thing, just freezes when in the welcome screen.
View 9 Replies
View Related
Apr 28, 2008
I have tried repeatedly to download Webroot Window washer ver 6.5 to my wife's computer. For some reason the download arrives with the select language menu vacant. When you click on the dropdown menu, it is also blank. You cannot continue past this screen. My wife has McAfee Virus Scan and Spybot Search and Destroy plus the firewall that Microsoft supplies. Could these interfere with the download? If so, how do I temporarily disable them so I can download Window Washer.As an alternative, can someone suggest another program which will function like Window Washer?
View 2 Replies
View Related
Apr 28, 2007
I am running Windows XP media edition on my Toshiba Qosmio Laptop.Currently when I startup I can get only as far as the windows starting screen with the little timer bar flowing but it never goes any farther. All I can do is power off and then start in safe mode.I have tried system restore to several points in the past to no avail. I think the problem may be to do with display drivers as it started shortly after installing Battlefield 2 (a little too advanced for my machine!!) which comes with some nvidia drivers. I have re-installed the drivers that came with the PC and this hasn't worked.
View 14 Replies
View Related
Jan 14, 2009
When I turn the computer on, it goes straight to the login screen, when I click on my name, it just tells me it is loading personal settings, and then it logs me off, then I'm right back where I was. I cannot even get into the computer.
View 10 Replies
View Related
Apr 30, 2010
I have an HP Pavilion 700 and I cannot get past the HP screen when booting up. What can I do to get to my desktop and if I ran a recovery would I still lose all my pictures? I need my pictures off first and then I can reformat if need be.
View 6 Replies
View Related
