compaq 4000 seris computer.celeron 1.4 256 of pc 133 ram. 20gig harddrive.Its running windows xp and they use the aol dial up service 8.0 ( they dont like 9.0).Now they said they had some spyware or something on the machine. i told them to run adaware and see if that would do it. Little did i know that they had aboutblank hack. well i *with some help from the nice guys at the boreds here* fixed that but now her aol internet wiill not work. So to fix some of the other things wrong with her pc i was ganna bring it to my house and use my charter broadband internet to use on the machine. Well the eithernet card the pc allready had installed is a SMZ EZ Card 10/100 pci (SMC1211TX).
Windows will not load the driver for this card makeing the use of my net impossible... its the code 31, windows cannot load the drivers for this device. Ive tired everything from unistalling the driver, reinstalling, updateing everything. then when i looked at the driver details it is trying to use a realtek driver for the card? I need some serous help here guys and i really appreciate it. Ive tried all i can think of to get it to work so i dont have to bug you all.
laptop has got the ZLOB virus and I am trying to get rid of it but I cannot connect to the internet because the drivers for the ethernet card are missing. There is no id on the laptop apart from the COA for XP and Z600 on a sticker underneath it. How can I find out what make it is so I can find the drivers. I don't mind paying for the drivers or a virus remover as long as they work.
Installed an ethernet card in a pc running XP home . Don't have the drivers for it . How do I determine what make card it is and what drivers I need and where to get them ?
recently wiped Toshiba Satellite A25-S307 notebook and installed Windows XP Pro. Now we find that there are no drivers for the internet: no wireless card driver, no ethernet controller driver. Cannot even find out the names of some of the lost drivers! Here is the "Problem Devices" list: Base System Device Ethernet Controller Not Available (this is what it says in the list!)PCI Modem Video Controller
Here are some drivers we know we need but cannot find: realtek rtl8139/810x family fast ethernet NIC Trident Cyberblade XP2 AGP 4x The major issue is no internet connectivity means we cannot use one of the driver scanner software out there. Every utility I find requires me to be able to connect to the internet on the affected machine!
ok, i recently ordered verizon online dsl the first area of concern is the fact that the brand new installation cd is scatched beyon the point of working. so i call the number and tell me we are going to it manually. OK that is fine by me. well then they tell that my dial up connection is getting in the way of my ethernet card. how i can check and see if my ethernet card is properlly installed?
Firstly I have a pc which I installed Win XP Prof onto. All worked great. Then took out modem card and replaced with ethernet card. Again no problem. However, when I went to boot the compute up a week or so later it went through the boot process and then just before I would expect to see the Windows logo with blue sky background appear I "sometimes" get a blue screen flash up with a message which you cant read unless you can slow down time and then the PC restarts and goes through the whole procedure again. I did manage to start in Boot logging mode and watch to see where the problem was. It seemed to be something to do with the Display adaptor. I found the appropriate solution on the web and although I now get further on into the boot, it still restarts. When i try to run the logging thing (!) it does not want to play any more and just boots in the normal fashion. I have tried defaulting the BIOS, checking the file system for damaged sectors etc all to no avail.
I bought a NC100U-WM Network card from Walmart and got everything working I think, except that while the box says that it is compatible with XP, the floppy doesn't have anything on it that would correspond to XP ... anyway, it looks like its working ok, all the lights light up - but the connection won't go anywhere except the centurytel diagnostics page.
I hooked earthlink back up and googled this card and seems like there is a lot of trouble with the drivers not being compatible with XP pro.... does anyone know a workaround - or should I take this back to Walmart ... and if so, what do I buy to work with DSL for century-tel - my computer didn't have an ethernet card on it
Am in the process of applying for Predator DSL service in place of my dialup service. One of the questions that is asked is "Does your computer have a 10/100 Ethernet card?" I can't answer that question because I really don't know. I checked for this info on the computer but can't find any info referring to an Ethernet card.
While I was deployed my wife inserted an Mini SD card in to the card reader built into the computer. When she removed the card windows locked up, as soon as she reinserted the card windows worked fine. She removed the mini SD card from the adapter to use in her phone, and windows still worked fine, but as soon as she removed the Mini SD adapter from the card reader windows locked up and the windows would hang during start-up with out the adapter. Reinserting the adapter cured the freeze and hang, but windows ran very slow.I removed and reinstalled the card reader drivers and was able to remove the adapter, but windows still hangs on start-up with out the adapter placed in the slot.
Whenever i install drivers on my pc, (i've tried graphics card drivers and wireless network card drivers) my pc stops working. When i installed the graphics card drivers, i tried testing the graphics on a game (counter-strike) but as soon as i got into the game, the pc flashes a blue screen, and reboots. I cant see what the blue screen says because it flashes on and off again to quick for me to read it. I decided to uninstall the graphics card drivers, and the game worked perfectly, but the graphics were REALLY bad. So i thought i might need to update some other drivers, so i tried to install my wireless network card, but when i finished installing the drivers when i had to restart my computer, it flashed the BSOD.... AGAIN! I need help urgently as im going to a LAN gaming comp called "rezidue" and its on in 2 weeks, i need my pc fixed by then! All these problems started when i upgraded my CPU. Everything was running smooth, and i was happily playing along on my computer, when i was asked what my FPS was in counter-strike, and i was all "mine are 65!" and there like "wow that sucks, mines 130" so i set out on my epic quest to get better FPS then everyone else and MAN THAT WAS A MISTAKE. I upgraded from my celeron 2.8ghz cpu to a P4 3.0ghz HT cpu, and thats when things started messing up on me. My entire system is as follows (incase it can help someone help me) P4 3.0ghz HT CPU, Microstar P4 motherboard, 128mb Nvidia Geforce mx4000 AGP x8 graphics card, 256MB ddr ram (recently brought new 1GB ddr ram off ebay just for rezidue! should be here soon!) TP-LINK 54mbps wireless network card) And last but not least
i have 2 Ethernet cards. here is the config desktop:eth0-router-modem-internet eth1-router-self contained network, laptop: wireless-wireless router-router-modem-internet eth1-router-self contained network now how do i tell windows not to use port 80 (or the internet ports at all) on eth1
I'm having an Ethernet card to go online and I tried everything to connect my computer to the internet but they all failed. After several attempts with the internet support guy to connect my computer, he finally told me that the ip that shows up in my computer is a wireless router ip that I used somewhere sometime and it is stuck. So, it's preventing the new ip from taking its place. How can remove the stuck ip from my Ethernet card?
I recently had to install XP on a michine that came with an in built ethernet card. I need to find out what ethernet card it is, so that I can install the relevant drivers to get it to work. I've tried to do some detective work to find out what ethernet card I to find the corresponding drivers. All I can come up with is from the Packard Bell website (the company from which the machine came). The only details I could find for the ethernet connection are something that says: LAN 10/100 (marvell 88E8039)
I am having one ethernet card in my WindowsXP server,how can I add one more ethernet card and configure it,so that in mean time both the cards should work simultaneous
I just recently re-formatted my Dell Dimension 3000 at work. I didn't have the original system disks and just installed a vanilla copy of XP Home. For some reason it will not read the ethernet port, making it difficult for me to install any new programs, or the obvious (get on the internet).
installed dynex dx-pcigb gigabit pci adapter ethernet card in my emachines t1120 computer as it only had a 56k modum adapter.ran enclosed cd for new card. wont connect to internet using internet explorer. tried unplugging router for 3 mins. and retry no connection.tryed uninstalling drivers and the reinstalling still no connection,on bottom of taskbar on the right side it saysaquiring network address,but it never happens.
I'm running windows xp pro...i'm trying to install an ethernet card and a box comes up asking for the windows cdrom to look for drivers it needs...problem is i don't have my copy of windows xp...is there a place on the computer that i can browse to find what it's looking for...i guess i'm asking if when windows xp pro is installed does it copy everything to the computer in a file somewhere. otherwise i don't know if it would be better just to buy another ethernet card or if i would have the same problem. i do have the floppy that came with the ethernet card but it says the file i need is not on the floppy...?
I just reformatted my comptuer/reinstalled windwos, and when I went to get online, I couldn't. Turns out the drivers to my computer's ethernet card were not installed. Kind of confused me a bit, since the card is exactly the same since we bough the computer about 3 years ago. I'm wondering were to get these drivers, since I cannot connect to the internet, none of the installation cd's drivers work, and the device manager is so vague about what specific hardware it is.
I installed windows xp pro on a computer, and it did not include the drivers for the ethernet port, therefore i cannot connect to the internet. ive been using a rewritable disk to transfer files, so can anyone post a link on how to get them?
I can't get my ethernet card working. it is a built in card to my mobo and it just will not let me get to it. I have updated the driver already. i can't connect ot the internet cause i have dsl and i have eveything connected thru a router my card is a Realtek RTL8139/810x Family fast ethernet nic
i am using Windows 2000.... Over the last two/three years i have experienced bad ethernet cards. Bright House (her ISP provider) has had to replace the ethernet card in her machine. What would cause this to keep happening?
A friend's Acer laptop, running XP, has a Broadcom Ethernet card which is disabled at boot. I'm told it started this a few weeks back, so I don't know if it's related to a M$ patch. Although I can turn the driver on in the device manager it doesn't want to remember the driver state when rebooted. Last time, when I thought I'd fixed it by disabling unneeded startup programs, I'd stumbled over a program advertising ability to set drivers to be enabled at boot but I don't want to buy a program to solve a simple problem. atm there are just Kaspersky and the Windoh$ firewall plus a few Acer and normal startup programs obvious. How do I set the Ethernet's driver to enabled from boot?..and is it clear what might have triggered this?
I've just reinstalled windows xp media center edition on my mams toshiba satalite a50 laptop but i cant get onto the internet using ethernet because i can't find the drivers well i goto install my bt home hub and it says i can only connect to the internet by using the usb wire and doesnt give me a option to use the internet throught the ethernet wire. so i install the usb drivers for the homehub and connect to the hub using usb then i went onto the toshiba website and downloaded the drivers so i could try and get my ethernet connection working but nothing seems to get it working plus my wireless connection doesnt work ther isnt anything on my computer that gives me a option to connect to the wireless network.
ethernet controller i dont know how to upgrade/install the right drivers, i know thatr my motherboard is the ASUS A7V8X ... but i'm having problems finding the right drivers
I've installed Windows 2000 Pro on a laptop computer from Fujitsu Siemens (from year 2000). I am using a Swedish version, so I guess it won't help if I repeat the error-message I get when I am trying to hibernate the computer. However, when I choose to hibernate, the screen flickers and then throws a error-message saying that the system is unable to hibernate because of a driver named "Intel 8255x-based PCI Ethernet Adapter (10/100)". I've been trying to change this driver to other versions and different alternative drivers, but I haven't succeeded. Another strange thing is that after a reboot I am able to hibernate, but right after that if I try to hibernate again I'll get that message.
I just downgraded from Vista/Win7 to XP. In Control Panel/system/hardware/device manger. It's showing no ethernet drivers. in network connections, nothing. How do I fix this so I can go online? Posted via Mobile Device
i recently formatted by acer 5583wxmi and unable to find Lan driver for it any where, able to go online thorugh wireless but not through lan as driver is not installed where can i find my lan driver for acer laptop. i have installed linux on one f the partition but unable to enable to the wifi its working fine under xp but nt in linux.
i just installed xp pro on my gatway 450rog all is working well but in the other device there are 5 things with yellow ? on them not the netork card that is fine but the ethernet controller,modem, how do i fix this i can not get it to conect to the internet to update thses
Reformatted sons computer and re installed Windows xp. Cannot connect to internet because there are no ethernet controllers, or video, and audio. This I expected and thought all I had to do was download drivers for the MS-7050. I have been at it 6 hrs now and cannot find them! I know I found before but cannot quite remember what I found. Am I looking for the wrong thing to get the controllers etc working? Its a HP dx5150, AMD 64 Athlon. Motherboard is MS-7050 Ver 1.3
