I can't get my ethernet card working. it is a built in card to my mobo and it just will not let me get to it. I have updated the driver already. i can't connect ot the internet cause i have dsl and i have eveything connected thru a router my card is a Realtek RTL8139/810x Family fast ethernet nic
installed dynex dx-pcigb gigabit pci adapter ethernet card in my emachines t1120 computer as it only had a 56k modum adapter.ran enclosed cd for new card. wont connect to internet using internet explorer. tried unplugging router for 3 mins. and retry no connection.tryed uninstalling drivers and the reinstalling still no connection,on bottom of taskbar on the right side it saysaquiring network address,but it never happens.
I just reformatted my comptuer/reinstalled windwos, and when I went to get online, I couldn't. Turns out the drivers to my computer's ethernet card were not installed. Kind of confused me a bit, since the card is exactly the same since we bough the computer about 3 years ago. I'm wondering were to get these drivers, since I cannot connect to the internet, none of the installation cd's drivers work, and the device manager is so vague about what specific hardware it is.
View 8 Replies View Relatedok, i recently ordered verizon online dsl the first area of concern is the fact that the brand new installation cd is scatched beyon the point of working. so i call the number and tell me we are going to it manually. OK that is fine by me. well then they tell that my dial up connection is getting in the way of my ethernet card. how i can check and see if my ethernet card is properlly installed?
View 8 Replies View RelatedI have an Emachines T3642 computer that originally came with Vista. I just down graded to XP Home edition using a windows software disk from an old laptop that is no longer working.Every thing went fine accept now my the computer is not acknowledging my ethernet connection and I am unable to get online. The ethernet cable light so I know it is working.
View 6 Replies View RelatedI have G speedbooster router and setup MAC address and WPA with password. My laptop can access fine. I have emachines t2882 with xp and USB wireless g speedbooster adapter. I can access internet when plugging in computer lan to lan on router. When using wireless usb, I key in code and says I am connected and green lights show, but when pulling up explorer, it says no connected? Device manager shows device is working properly.I tried setting up automatically assign IP's on the computer and got same result, and put in specific IP I have assigned from the router to this computer with same results as well.Again, looks like I am connected, but explorer does not seem to recognize I am connected.
View 3 Replies View RelatedFirstly I have a pc which I installed Win XP Prof onto. All worked great. Then took out modem card and replaced with ethernet card. Again no problem. However, when I went to boot the compute up a week or so later it went through the boot process and then just before I would expect to see the Windows logo with blue sky background appear I "sometimes" get a blue screen flash up with a message which you cant read unless you can slow down time and then the PC restarts and goes through the whole procedure again.
I did manage to start in Boot logging mode and watch to see where the problem was. It seemed to be something to do with the Display adaptor. I found the appropriate solution on the web and although I now get further on into the boot, it still restarts. When i try to run the logging thing (!) it does not want to play any more and just boots in the normal fashion. I have tried defaulting the BIOS, checking the file system for damaged sectors etc all to no avail.
I have just got a phone plug in my room so I do not have to use my USB adaptor for my wireless broadband as it keeps losing the signal. I now have the router in my room using the Ethernet hole on my new MSI K8T Neo2-F V2.0 Motherboard, but every time I try and download a file it is corrupted. I have tried many different file just in case it was that. This did not work so I tried using my USB adopter and every thing downloads fine again. The driver for it is Realtek rtl8169/8110 family GIGABIT ETHERNET NIC and this is the web site for the motherboard nhttp://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=3318077&CatId=15
laptop has got the ZLOB virus and I am trying to get rid of it but I cannot connect to the internet because the drivers for the ethernet card are missing. There is no id on the laptop apart from the COA for XP and Z600 on a sticker underneath it. How can I find out what make it is so I can find the drivers. I don't mind paying for the drivers or a virus remover as long as they work.
View 4 Replies View Relatedthe dial up worked fine until i took my computer to the high speed net at work. when i got the computer back i hooked it back up and dialed up it connected then i tried to view my webpage. it said page cant be displayed. my downloader was disconnected to. i had all the signs i was not connected to the internet but i was.
View 14 Replies View RelatedI bought a NC100U-WM Network card from Walmart and got everything working I think, except that while the box says that it is compatible with XP, the floppy doesn't have anything on it that would correspond to XP ... anyway, it looks like its working ok, all the lights light up - but the connection won't go anywhere except the centurytel diagnostics page.
I hooked earthlink back up and googled this card and seems like there is a lot of trouble with the drivers not being compatible with XP pro.... does anyone know a workaround - or should I take this back to Walmart ... and if so, what do I buy to work with DSL for century-tel - my computer didn't have an ethernet card on it
Am in the process of applying for Predator DSL service in place of my dialup service. One of the questions that is asked is "Does your computer have a
10/100 Ethernet card?" I can't answer that question because I really don't know. I checked for this info on the computer but can't find any info referring to an Ethernet card.
Computer is connected on a router, internet work fine. i just got a second computer today i formated it and installed windows XP pro on it all went fine, i installed lan video card, but when i try to connect its show an error page, the connection say i am connected and all.
View 10 Replies View Relatedi have 2 Ethernet cards. here is the config desktop:eth0-router-modem-internet eth1-router-self contained network, laptop: wireless-wireless router-router-modem-internet eth1-router-self contained network now how do i tell windows not to use port 80 (or the internet ports at all) on eth1
View 2 Replies View Relatedcompaq 4000 seris computer.celeron 1.4 256 of pc 133 ram. 20gig harddrive.Its running windows xp and they use the aol dial up service 8.0 ( they dont like 9.0).Now they said they had some spyware or something on the machine. i told them to run adaware and see if that would do it. Little did i know that they had aboutblank hack. well i *with some help from the nice guys at the boreds here* fixed that but now her aol internet wiill not work. So to fix some of the other things wrong with her pc i was ganna bring it to my house and use my charter broadband internet to use on the machine. Well the eithernet card the pc allready had installed is a SMZ EZ Card 10/100 pci (SMC1211TX).
Windows will not load the driver for this card makeing the use of my net impossible... its the code 31, windows cannot load the drivers for this device. Ive tired everything from unistalling the driver, reinstalling, updateing everything. then when i looked at the driver details it is trying to use a realtek driver for the card? I need some serous help here guys and i really appreciate it. Ive tried all i can think of to get it to work so i dont have to bug you all.
I'm having an Ethernet card to go online and I tried everything to connect my computer to the internet but they all failed. After several attempts with the internet support guy to connect my computer, he finally told me that the ip that shows up in my computer is a wireless router ip that I used somewhere sometime and it is stuck. So, it's preventing the new ip from taking its place. How can remove the stuck ip from my Ethernet card?
View 13 Replies View RelatedI recently had to install XP on a michine that came with an in built ethernet card. I need to find out what ethernet card it is, so that I can install the relevant drivers to get it to work. I've tried to do some detective work to find out what ethernet card I to find the corresponding drivers. All I can come up with is from the Packard Bell website (the company from which the machine came). The only details I could find for the ethernet connection are something that says: LAN 10/100 (marvell 88E8039)
View 8 Replies View RelatedI am having one ethernet card in my WindowsXP server,how can I add one more ethernet card and configure it,so that in mean time both the cards should work simultaneous
View 4 Replies View RelatedI just recently re-formatted my Dell Dimension 3000 at work. I didn't have the original system disks and just installed a vanilla copy of XP Home. For some reason it will not read the ethernet port, making it difficult for me to install any new programs, or the obvious (get on the internet).
View 3 Replies View RelatedI'm running windows xp pro...i'm trying to install an ethernet card and a box comes up asking for the windows cdrom to look for drivers it needs...problem is i don't have my copy of windows xp...is there a place on the computer that i can browse to find what it's looking for...i guess i'm asking if when windows xp pro is installed does it copy everything to the computer in a file somewhere. otherwise i don't know if it would be better just to buy another ethernet card or if i would have the same problem. i do have the floppy that came with the ethernet card but it says the file i need is not on the floppy...?
View 13 Replies View Relatedthis has been bothering me for weeks and not a single thing I've tried has solved it. It's really a problem now, because I can't just not back my stuff up forever, I have to get this sorted out.I have a PC that I keep all my stuff on, run uTorrent on, my media center application, etc. It's got 8 HDDs. Half for storage, half for backup. 5TB overall (well less...but you know). I have an application that runs once a day to sync the drives with their counterparts. Everything was fine, until I got a new motherboard and CPU for the system.Now.....whenever I run my backups, this message will appear. Either very rapidly, or at some point during. The whole system will slow to a near halt (it can take 30 seconds for the mouse to register movement), and the only course of action is to turn the system off and on again. It's because of this Delayed Write Failed error (it pops up, sometimes immediately....and sometimes if you let the system keep running).
I've looked online for solutions. Some of them say to disable delayed write in the HDD properties. I've done that for most drives (the drives connected to the system via a PCI-E controller card have that tick box option greyed out. Nothing I've tried has made a blind bit of difference.
Installed an ethernet card in a pc running XP home . Don't have the drivers for it . How do I determine what make card it is and what drivers I need and where to get them ?
View 10 Replies View Relatedi am using Windows 2000.... Over the last two/three years i have experienced bad ethernet cards. Bright House (her ISP provider) has had to replace the ethernet card in her machine. What would cause this to keep happening?
View 7 Replies View RelatedI dont know where the ethernet card is is it the one where the phone line go's or not i have a dell
View 14 Replies View RelatedA friend's Acer laptop, running XP, has a Broadcom Ethernet card which is disabled at boot. I'm told it started this a few weeks back, so I don't know if it's related to a M$ patch. Although I can turn the driver on in the device manager it doesn't want to remember the driver state when rebooted. Last time, when I thought I'd fixed it by disabling unneeded startup programs, I'd stumbled over a program advertising ability to set drivers to be enabled at boot but I don't want to buy a program to solve a simple problem. atm there are just Kaspersky and the Windoh$ firewall plus a few Acer and normal startup programs obvious. How do I set the Ethernet's driver to enabled from boot?..and is it clear what might have triggered this?
View 5 Replies View Relatedrecently wiped Toshiba Satellite A25-S307 notebook and installed Windows XP Pro. Now we find that there are no drivers for the internet: no wireless card driver, no ethernet controller driver. Cannot even find out the names of some of the lost drivers! Here is the "Problem Devices" list: Base System Device Ethernet Controller Not Available (this is what it says in the list!)PCI Modem Video Controller
Here are some drivers we know we need but cannot find: realtek rtl8139/810x family fast ethernet NIC Trident Cyberblade XP2 AGP 4x The major issue is no internet connectivity means we cannot use one of the driver scanner software out there. Every utility I find requires me to be able to connect to the internet on the affected machine!
i recently formatted by acer 5583wxmi and unable to find Lan driver for it any where, able to go online thorugh wireless but not through lan as driver is not installed where can i find my lan driver for acer laptop. i have installed linux on one f the partition but unable to enable to the wifi its working fine under xp but nt in linux.
I have this problem at my work computer, on that one we run Windows XP. Verizon DSL for the last 2 days I have not been able to stay connected to the internet for more than 5 or 6 minutes. then I hafto reboot ran the virus thing the adware thing and the spyware thing but no improvement contacted Verizon to check my line but they said everything looked ok
View 2 Replies View RelatedMy Old computer is not connected to the internet and is running XP home with NO Service packs. I want to install SP2 but I cannot use windows update because it is not connected to the internet. I have installed a uxtheme patch so would that make problems when upgrading? Somewhere there must be a file that I can download, burn to CD or thumb drive, transfer and Install.I have found this but it says it is a Network Installation Package for IT Professionals and Developers,
View 8 Replies View RelatedI have two computers kitchen computer is hooked up to dsl modem, I have a router in the computer in bedroom.I can only connect to the internet thru the computer in the kitchen, the one in the bedroom says that it can not connect to the server.all the wires are connected correctly, but still nothing
View 2 Replies View RelatedWhenever i login and try to open Internet explorer or any internet browser on Windows XP, it gives me a message saying that the page could not be displayed. However, i am clearly connected to the internet as i can access it from Linux on the same computer and i can play on Xbox Live. Also, when i try to access the internet in safe mode with networking enabled, it still says that the page could not be displayed. Is there any way i can fix this without reinstalling windows because my computer did not include an XP disc when i bought it.
View 10 Replies View Related