I recently had to install XP on a michine that came with an in built ethernet card. I need to find out what ethernet card it is, so that I can install the relevant drivers to get it to work. I've tried to do some detective work to find out what ethernet card I to find the corresponding drivers. All I can come up with is from the Packard Bell website (the company from which the machine came). The only details I could find for the ethernet connection are something that says: LAN 10/100 (marvell 88E8039)
laptop has got the ZLOB virus and I am trying to get rid of it but I cannot connect to the internet because the drivers for the ethernet card are missing. There is no id on the laptop apart from the COA for XP and Z600 on a sticker underneath it. How can I find out what make it is so I can find the drivers. I don't mind paying for the drivers or a virus remover as long as they work.
Installed an ethernet card in a pc running XP home . Don't have the drivers for it . How do I determine what make card it is and what drivers I need and where to get them ?
I am a computer enthusiast and I assemble my own PCs. I wanted to know how to brand the PC with custom System Manufacturer and System Model settings. I am aware of the OEMINFO.ini file but that only changes information in the Computer properties page when you right-click 'My Computer' and choose properties.But when you use dxdiag,the System Manufacturer and System Model read "To be filled by O.E.M".Could anyone please tell me how to go about changing these settings ? Changing the OEMINFO.ini file does not affect these values.OEM manufacturers like Dell, Sony have changed the settings on their products, so I'm sure it's possible.
ok, i recently ordered verizon online dsl the first area of concern is the fact that the brand new installation cd is scatched beyon the point of working. so i call the number and tell me we are going to it manually. OK that is fine by me. well then they tell that my dial up connection is getting in the way of my ethernet card. how i can check and see if my ethernet card is properlly installed?
Firstly I have a pc which I installed Win XP Prof onto. All worked great. Then took out modem card and replaced with ethernet card. Again no problem. However, when I went to boot the compute up a week or so later it went through the boot process and then just before I would expect to see the Windows logo with blue sky background appear I "sometimes" get a blue screen flash up with a message which you cant read unless you can slow down time and then the PC restarts and goes through the whole procedure again. I did manage to start in Boot logging mode and watch to see where the problem was. It seemed to be something to do with the Display adaptor. I found the appropriate solution on the web and although I now get further on into the boot, it still restarts. When i try to run the logging thing (!) it does not want to play any more and just boots in the normal fashion. I have tried defaulting the BIOS, checking the file system for damaged sectors etc all to no avail.
I bought a NC100U-WM Network card from Walmart and got everything working I think, except that while the box says that it is compatible with XP, the floppy doesn't have anything on it that would correspond to XP ... anyway, it looks like its working ok, all the lights light up - but the connection won't go anywhere except the centurytel diagnostics page.
I hooked earthlink back up and googled this card and seems like there is a lot of trouble with the drivers not being compatible with XP pro.... does anyone know a workaround - or should I take this back to Walmart ... and if so, what do I buy to work with DSL for century-tel - my computer didn't have an ethernet card on it
Am in the process of applying for Predator DSL service in place of my dialup service. One of the questions that is asked is "Does your computer have a 10/100 Ethernet card?" I can't answer that question because I really don't know. I checked for this info on the computer but can't find any info referring to an Ethernet card.
i have 2 Ethernet cards. here is the config desktop:eth0-router-modem-internet eth1-router-self contained network, laptop: wireless-wireless router-router-modem-internet eth1-router-self contained network now how do i tell windows not to use port 80 (or the internet ports at all) on eth1
compaq 4000 seris computer.celeron 1.4 256 of pc 133 ram. 20gig harddrive.Its running windows xp and they use the aol dial up service 8.0 ( they dont like 9.0).Now they said they had some spyware or something on the machine. i told them to run adaware and see if that would do it. Little did i know that they had aboutblank hack. well i *with some help from the nice guys at the boreds here* fixed that but now her aol internet wiill not work. So to fix some of the other things wrong with her pc i was ganna bring it to my house and use my charter broadband internet to use on the machine. Well the eithernet card the pc allready had installed is a SMZ EZ Card 10/100 pci (SMC1211TX).
Windows will not load the driver for this card makeing the use of my net impossible... its the code 31, windows cannot load the drivers for this device. Ive tired everything from unistalling the driver, reinstalling, updateing everything. then when i looked at the driver details it is trying to use a realtek driver for the card? I need some serous help here guys and i really appreciate it. Ive tried all i can think of to get it to work so i dont have to bug you all.
I'm having an Ethernet card to go online and I tried everything to connect my computer to the internet but they all failed. After several attempts with the internet support guy to connect my computer, he finally told me that the ip that shows up in my computer is a wireless router ip that I used somewhere sometime and it is stuck. So, it's preventing the new ip from taking its place. How can remove the stuck ip from my Ethernet card?
The wireless internet isn't working... I don't know what wireless card I have.. I should only have to install the driver, but I can't get online to download it.
I am having one ethernet card in my WindowsXP server,how can I add one more ethernet card and configure it,so that in mean time both the cards should work simultaneous
I just recently re-formatted my Dell Dimension 3000 at work. I didn't have the original system disks and just installed a vanilla copy of XP Home. For some reason it will not read the ethernet port, making it difficult for me to install any new programs, or the obvious (get on the internet).
installed dynex dx-pcigb gigabit pci adapter ethernet card in my emachines t1120 computer as it only had a 56k modum adapter.ran enclosed cd for new card. wont connect to internet using internet explorer. tried unplugging router for 3 mins. and retry no connection.tryed uninstalling drivers and the reinstalling still no connection,on bottom of taskbar on the right side it saysaquiring network address,but it never happens.
I'm running windows xp pro...i'm trying to install an ethernet card and a box comes up asking for the windows cdrom to look for drivers it needs...problem is i don't have my copy of windows xp...is there a place on the computer that i can browse to find what it's looking for...i guess i'm asking if when windows xp pro is installed does it copy everything to the computer in a file somewhere. otherwise i don't know if it would be better just to buy another ethernet card or if i would have the same problem. i do have the floppy that came with the ethernet card but it says the file i need is not on the floppy...?
I just reformatted my comptuer/reinstalled windwos, and when I went to get online, I couldn't. Turns out the drivers to my computer's ethernet card were not installed. Kind of confused me a bit, since the card is exactly the same since we bough the computer about 3 years ago. I'm wondering were to get these drivers, since I cannot connect to the internet, none of the installation cd's drivers work, and the device manager is so vague about what specific hardware it is.
I can't get my ethernet card working. it is a built in card to my mobo and it just will not let me get to it. I have updated the driver already. i can't connect ot the internet cause i have dsl and i have eveything connected thru a router my card is a Realtek RTL8139/810x Family fast ethernet nic
i am using Windows 2000.... Over the last two/three years i have experienced bad ethernet cards. Bright House (her ISP provider) has had to replace the ethernet card in her machine. What would cause this to keep happening?
A friend's Acer laptop, running XP, has a Broadcom Ethernet card which is disabled at boot. I'm told it started this a few weeks back, so I don't know if it's related to a M$ patch. Although I can turn the driver on in the device manager it doesn't want to remember the driver state when rebooted. Last time, when I thought I'd fixed it by disabling unneeded startup programs, I'd stumbled over a program advertising ability to set drivers to be enabled at boot but I don't want to buy a program to solve a simple problem. atm there are just Kaspersky and the Windoh$ firewall plus a few Acer and normal startup programs obvious. How do I set the Ethernet's driver to enabled from boot?..and is it clear what might have triggered this?
recently wiped Toshiba Satellite A25-S307 notebook and installed Windows XP Pro. Now we find that there are no drivers for the internet: no wireless card driver, no ethernet controller driver. Cannot even find out the names of some of the lost drivers! Here is the "Problem Devices" list: Base System Device Ethernet Controller Not Available (this is what it says in the list!)PCI Modem Video Controller
Here are some drivers we know we need but cannot find: realtek rtl8139/810x family fast ethernet NIC Trident Cyberblade XP2 AGP 4x The major issue is no internet connectivity means we cannot use one of the driver scanner software out there. Every utility I find requires me to be able to connect to the internet on the affected machine!
i recently formatted by acer 5583wxmi and unable to find Lan driver for it any where, able to go online thorugh wireless but not through lan as driver is not installed where can i find my lan driver for acer laptop. i have installed linux on one f the partition but unable to enable to the wifi its working fine under xp but nt in linux.
I am running xp pro. I can not get an internet connection through my ethernet card. When I hook up my modem through usb it works fine but unable to utilize my full download speed capabilities. Hooked the modem up via ethernet to laptop and it worked just fine. The only thing I can find wrong that I don't know how to fix or what is causing it is the fact that the physical address of the card comes up as the broadcast address (FF-FF-FF-FF-FF-FF). Very strange.
I have just got a phone plug in my room so I do not have to use my USB adaptor for my wireless broadband as it keeps losing the signal. I now have the router in my room using the Ethernet hole on my new MSI K8T Neo2-F V2.0 Motherboard, but every time I try and download a file it is corrupted. I have tried many different file just in case it was that. This did not work so I tried using my USB adopter and every thing downloads fine again. The driver for it is Realtek rtl8169/8110 family GIGABIT ETHERNET NIC and this is the web site for the motherboard nhttp://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=3318077&CatId=15
i did a system recovery to get rid of serious problems and my files and pictures are gone. i have done this before and it has always saved my stuff. is there anyway i can get this stuff back? please tell me yes, all my pics of my kids birthdays and christmas's were in there.
I am about to purchase a laptop and if there is anything I've learned over the years, it's that these companies like to cram laptops with useless software, most of which expires after a certain amount of time thus making it even more useless. What I would like to do after purchasing the laptop is completely format the hard drive and then install my own copy of Windows along with software that I do use. If anything ever goes wrong however, the originally installed version of Windows along with the manufacturer's software / utilities will most likely be needed for warranty. So my question is about how to make a perfect copy of the hard drive before formatting it. I have Partition Magic which has an option called "Copy Partition" which I imagine is what I am looking for, but I would like to make sure I don't do anything wrong.
Would I install Partition Magic, make a hidden partition that is large enough for the currently installed version of Windows and the extra "bundled" software, and then copy Windows and the software to it? After which I would then format the rest of the hard drive and then install my own version of Windows there. If anything ever goes wrong, I would format the partition I was working with and copy the hidden partition back to it. Is this the correct thing to do, and if so is there anything else I should be aware of before doing this. For example, will the original version of windows still function correctly if I ever did have to restore it? I always hear about people doing this and I assume this is what they do.
Every time I boot up, I get hit with two "Found New Hardware" things, something about an ethernet controller and an SM bus controller. The computer works fine, but I'm getting sick of that stuff popping up. Is there any way to disable it, other than having to hunt down drivers which may or may not fix the problem?
I noticed that under the "services" tab in msconfig, I have a strange entry that has a tick mark showing it to be active. Here it is: xxId_String1.6844F930 _1628_B5CC_5bb94B879762 Manufacturer: Unknown
I recently figured out that some kind of virus is attached to my harddrive that is not picked up by any detection program. The files end in .exe and when using task manager, I delete the file and it generates a new file name with the same extention repeatedly. The CPU usage stays at 100% making it impossible for me to navigate the internet and play on line games. I did a file search, deleted the known files and rechecked task manager. They were still there. If I sit and delete them each time I turn on my computer it takes me considerable amount of time and even then I may not get them all. I don't know what else to try to get my computer running better without a total reboot
I have a Maxtor internal 300gb drive that I've mounted in an external casing. The other day I knocked it over and ever since then when I turn it on it makes some kind of warning sound three times. The computer doesn't detect it anymore and I can't access any of the information on it
