Svga Versus Vga Display Driver
Feb 7, 2007would getting a generic SVGA driver be better than the VGA, if so where can I find a SVGA monitor?
View 4 Replieswould getting a generic SVGA driver be better than the VGA, if so where can I find a SVGA monitor?
View 4 RepliesI am experiencing pixelization problems. At first it would only occur at boot up or reboot. Now it is happening all the time which can be help somewhat by refresh, changing the desktop picture, and/or logging off then on I have tried, disabling the 128MB DDR ATI Radeon 9800 Pro using device manager. At first it was OK but at low resolution (VGA I think), but when it asked if I wanted to let windows manage the graphics it got garbled again. I have reset resolutions down to 800 x 600 using the graphics card but that doesn't help.
View 2 Replies View RelatedRunning a core2duo is there a benefit to using one or the other WIndows XP pro or Windows xp pro 64 - bit?
View 5 Replies View RelatedWindows Stops Responding and You Receive a "Display Driver Has Stopped Working Normally" Error Message.This is where it started...and I went to the Matrox site trying to get updates etc still having problem. One of my major issues is the fact I don't have/can't afford internet at home and its difficult to bring my pc tower to work. Not sure if it's an update issue, and tried loading updated bios and driver.my computer works for awhile and then either totally locks up to where I have to manually shut off/reboot or it loses display and then jumps to the safe mode display mode and tells me the above message. When rebooting, sometimes it will have to sit for 5-10 minutes before I can get it to turn back on (machine beeps and dies with fans running only).
View 6 Replies View RelatedI have a situation that I am not able to resolve.A friend went into the display settings and disabled the display driver which shut down the video output when Windows XP runs.After the bios does the boot process, you can hear the Windows start up sound but there is no desktop.There is just a blank screen.I have attempted to boot in safe mode and no luck.I have tried to boot to the last good setting.I have also attempted to boot with an XP disk and repair, but there is an administrator password preventing me from going any farther with this option.
View 7 Replies View RelatedReceived a message "Windows Display Driver stopped responding....." after I closed the box, Microsoft asked if I wanted to send an error report, which I did, and immediately responded with a recommend fix/upgrade and the link to the website. My question is this. The graphics driver that it recommended upgrading (Intel 82915G or 82910GL) is not the same Intel graphics chipset that I have installed on the computer (82845G/GL).Which update should I install? The one that Microsoft automatically found and sent to me, or the one that actually matches my machine?
View 3 Replies View RelatedMy computer is going nuts. All of the sudden it everything on the screen went blank then came up in terrible colors and HUGE. It then proceeds to pop up a message that says:Windows Display Driver Stopped Responding..That's the only part of the message I could write down before it rebooted. When it restarts Installation Wizard starts. It asks if it can install the RAID Controller. I do not install it, I also dont know if i have the cd or not it needs.
View 3 Replies View RelatedAlright, whenever I play my computer games, the screen turn all dotty and it is very slow.My display driver is Radeon IGP 345M.
View 4 Replies View RelatedFinding ATI Catalyst 6.3(8.231) Display Driver And Software? You can read about and download it from here. Make sure to read the "Release Notes"
View 7 Replies View RelatedI'm running Win/XP on a Toshiba Laptop, 40MB. Everything is up to date regarding
MS updates. Yesterday I noticed my screen begin to "unstabilize". The images of letters
and graphics started breaking up and eventually I received a msg stating that the NVIDIA graphics NV4_DISP display driver has stopped working normally.
I went to the NVIDIA site but I was not sure what driver to D/L and if that is even what I should do..
Can someone please advise me. I have to use another computer (my wife's) since mine
only works for about 2-4 minutes before it shuts down (actually it seems to go into
safe mode, but the letters eventually fragment and I have to shut down.).
I have this pentium 3 - 700 mhz computer which today I formatted and installed windows xp pro on it. The motherboard on the computer comes with a SIS 5598/6326 display adapter for which I been searching the internet for its WIN XP driver but havent found any except for the other versions of windows are available.What can I do if there is no WIN XP version of this driver?
View 1 Replies View RelatedDoes anyone know where I can find the display driver for this laptop? I've looked everywhere but all the links I follow seem to lead to a driver detective download. Or is there a free driver scanner that could do the job?
View 4 Replies View RelatedWhat happened is I just installed a new Hard Drive and a fresh windows install (XP Pro with Service pack 3). After all was installed it logged into my account (Me) which was my account with Administrator privileges. I did a series of windows updates now when I turn my computer on it goes straight to the Administrator account and not my account (me). So I have to log off or switch accounts from Admin to Me. I just want it to login to Me all the time. So I am not smart enough to figure it out.
View 1 Replies View RelatedI have problems if I try and run the display settings above 800x600. I was wondering if this would be fixed if I upgrade the firmware settings and if so where would I get these upgrades? Whenever I try and run it at a higher display setting all I get is a thing saying "Signal isnt compatible with this display setting".
View 6 Replies View RelatedWhile playing a game I hit some buttons on accident and the display shrunk. Now the monsters are small, and so is everything else outside of the game I have no idea what I did, I checked the Screen Resolution and it seems fine, and I also checked my monitor settings, which is fine.
The monitor started showing graphic distortion. I ordered a new monitor but had the same distortion on it. I updated the ATI drivers but it did not solve the problem. In trying to trouble shoot the problem following directions on the ATI website, I changed all the graphic settings to the lowest and slowest available. This got rid of the distortion but the settings need to go! Now I cannot open the display settings.
View 3 Replies View RelatedMy XP is currently defaulted on it's display settings 640v by 480 pixels and will not allow me to change it. In fact, there is nothing to change it to. I dont know what file I must of deleted, but is there anyway I can download the driver or something to make it so that it can be set on opitions that are higher?
View 7 Replies View RelatedAll my text/font display settings seem to have changed. I downloaded a freeware program today called avi2dvd, to convert avi video files to iso files for burning to DVD. I tried it out, got frustrated with it, and uninstalled it. After I uninstalled it, I went to check my email. That's when I first noticed that all the text in my yahoo email account had changed - it seemed smaller, like it was at a lower resolution.
I clicked on a few more pages and it was the same for all of them - the text was just not as...smooth. Not as readable. And definitely smaller. It's not just a font size thing, I'm not that much of a newbie, I tried enlarging the font and it's definitely a resolution thing, not just a font or size issue. Then I tried out some other programs, and found out that the problem was system-wide. I use a writing program called Final Draft, and the text in that is also less readable.I found one program that hadn't been affected: IE all my web pages display fine in Explorer.
my mom installed a virus the other day on accident. (Some program called Dr. Spy Shreddar, or something like that.) I deleted it, but some stuff was weird with the computer. I tried restarting the system to get the old configuration back, but the virus just installed itself again. I removed it again, using instructions from Systematic Antivirus and now it's really gone. Some of the settings were still weird though. So after hours of searching the help topics on Microsoft I managed to fix 1 & 1/2 of the problems I had/have.
For one of the problems they made me go into the registry and set something to the value of 0 in order to get the desktop tab back in the Display Properties box. (You know when you right click on the desktop and select properties.) That's all fine and dandy, but here's the other 1/2 of my problem: I can't access some of the features in the tab. (I have Windows XP Professional, by the way.) I can't click inside of the background list and it's shaded a sort of brownish beige color. I also can't browse and do anything with the position setting. I can however access the customize desktop and color features
I was installing security cables for the computer stations. when I finished and rebooted the computers(had to disconnect power and other cords to run the security cables) one of them had a display problem.
it seems that the display area has been reduced. the functional area of the screen is maybe 60% of what it should be. in this area it is complete with the full desktop able to be accessed and nothing is missing. but the right 20% of the screen is solid black (cursor stops at the boundary) and the bottom 20% of the screen(that's not black) is displaying a second image of the top 20% of my desktop. (cursor also stops at this boundary.)
I reinstalled XP Pro with SP1 on my computer today. Everything is working well except when my desktop loads the actual display is about an inch to the right on the screen. If I go into properties and change/apply the screen resolution from 800 x 600 then back to 1024 x 768 it realigns and all is well. I would just prefer to not have to do that each time I restart windows.
View 4 Replies View Relatedmy mom installed a virus the other day on accident. (Some program called Dr. Spy Shreddar, or something like that.) I deleted it, but some stuff was weird with the computer. I tried restarting the system to get the old configuration back, but the virus just installed itself again.For one of the problems they made me go into the registry and set something to the value of 0 in order to get the desktop tab back in the Display Properties box. (You know when you right click on the desktop and select properties.) That's all fine and dandy, but here's the other 1/2 of my problem: I can't access some of the features in the tab.
View 8 Replies View RelatedI have a Gateway 7422GX which as a Mobility Radeon 9550. I repaired windows using the cd because I restarted my computer and it was either going to take 7min+ to boot, or just wasn't going to. I got stuck at the windows splash screen. I'm using windows professional. Whenever I try to install any of the drivers, I get the same error message: Setup did not find a driver compatible with your current hardware or operating system. Setup will now exit.
View 10 Replies View RelatedI have this seriously big problem on my computer (well why else would i be here)i have a ACER Aspire L100 which is a VERY good pc.it used to have Media Centre edition as the operating system but it suddenly stopped working. so i was forced to install windows xp home edition.now when i install the sound driver ever time i try and open up a media program such as media player or itunes and turns around and tells me that there is a problem with the sound card and another program must be using it. The graphic driver is the other driver that wont install properly. when i run the installation i get a message that reads
ive tried and run windows update but it doesnt find anything.
Thanks in advance
Peter
I have a strange problem, I must have somehow scrolled a display window in my program out of the screen and left it there. Now the window has cut off 20% of the side of window and there is no way to bring it back into the window.If I mazimize the window size the scroll doesn't show.If I make the window smaller so that the horizontal scroll does show it won't scroll far enough to the left to show the missing section of the window.
View 14 Replies View Relatedinstall a sound driver or audio driver on windows xp, it worked on windows millenium before i upgraded to windows xp, can someone please tell me what i must do to install a sound driver and or audio driver i also have no access to the internet on that computer, this is my spare
View 1 Replies View RelatedSomehow my clever 9-month old managed to change the display on my screenr. He managed to push some keys on the keyboard and now the screen display has rotated 90 degrees. So I have to set my monitor on its side so I can actually see what I'm doing. I can't figure out how to rotate the display back to its
original orientation.
My display on my screen has been rotated 90 degrees to the left (or 270 degrees). How do I make it vertical again ? - rotste it 90 degrees
View 2 Replies View RelatedI have an older IBM 10in screen thinkpad running Win2000. Turned it on for the first time in a while the other day and the windows sign on screen is off the right and it is like I am on dual monitor. Can slide pointer to right and get to one side with startup menu then slide pointer back to left for icons. When put a screen saver on in tile mode, it duplicates it side by side but you have to scroll left to see both. Have gone into display and tried to change things but nothing works. When I go to settings, it shows only one monitor but says display [Multiple monitors} on silicon Motion LynxEM+.
View 3 Replies View Relatedwhen I turn on my pc, the monitor doesn't show anything at all. I have no idea what casue the problem. Even I have the video card replaced, it doesn't solve the problem.
I don't think is the monitor problem as I tested the monitor from other pc and it works perfectly.
I'm running windows Xp and i shut down my computer and restart it like your supposed to and then when i restart my monitor is blank yet i can hear all of the sounds of start up. So i shut it down again and i still come up with a blank screen and now i'm using a external monitor to view my desktop. Now when i look at my laptops monitor i can vaguely see what i'm doing at all and the external monitor is fine. Also my laptop is creating alot of heat.
View 5 Replies View Related