I decided to format my computer because it was going really slow...So i got paragon partition manager and created a logical partition called "backup" and dragged all my important files into that partition. then i used killdisk to format my C: partition. Now i use my recovery disk and it says " All files, including data files on the user partition will be lost and the original factory shipped files will will be recovered to the users partition." Will this delete my backup partition too? If it does, how do i recover windows while keeping my partition with the backup files on it? The files are reallly important...
i have found that my little bro has accidentally formated my hdd and deleted partitions also then he created new partitions and installed XP. now is there any hope or a way that i can recover my previous data ????
is it safe to delete data from my recovery partition which I don't want to regain space on that partition? i want to regain some hundred mbs on this partition to backup my os and other important things - can i do this? or can't my recovery partition be modified?
after doing a system recovery with a backup i found that the backup file is off no use to me anymore. The only problem is i can't delete it and it is taking up a large amount of space. I already tried going into safe mode to delete but it didn't work. i tried changing it from a read only folder but it says the file is either write protected or in use. i believe it may be somehow in use. if anyone knows how to delete this folder.
Is it possible to recover data from an external HD that I accidently deleted the partition and created a new one I just got a "new" computer - it's actualy a hand-me-down that I was trying to do a clean install of Windows XP on. I booted it up with the XP disk in the CD drive, and thought I was telling it to delete the existing partition and create a new one on the C: drive, but I didn't realize that it was also recognizing the external drive, which was already plugged into a USB port (why I even went ahead and plugged it in I don't know - that was stupid mistake It was the first one listed, and I thought it was telling me that there were two partitions on the internal drive, not two drives I also didn't pay attention to the size it was telling me the drive was (stupid mistake #2), I just told it to create a partition with the maximum possible size
the computers im tring to format have 1 6g partition and are running windows xp. all i want to do is get rid of that partition, the computers have no cd drive and i cannot get past the login screen. so somehow i have to format or delete the partition from the startup which i thought would be easy enough but so far i have been unsuccesful.
I have an old customized computer from my grandma and when it boots up it asks me to select a operation system, there are two. How do I delete the operating system I don't want?I don't care if I have to reformat the whole hard drive... I would actually prefer to. And I have tried to delete one, but I cant seem to get rid of one of them.
Before re-installing the XP operating system on my Dell desktop, a backup of the system (using the Windows System Utilities) was saved to an external hard drive. Then Windows XP Media Center Edition 2002 Service Pack 2 was re-installed. The *.bkf on the external hard drive was accidentally deleted. There was a warning that it was too large to go to the Recycle Bin before it was deleted. I want to un-delete and restore this *.bkf or at least get as many of the *.jpg files (digital photos) out of it. Is there some file retrieve program that will deal specifically with .bkf files given that it is so large (many GBs)? One program we tried didn't locate any *.bkf files.
I thought I'd be cool and upgrade my XP home to XP pro. I installed OS successfully thinking that I was upgrading and booted the computer. It starts just fine but where I pick what OS I boot to it has BOTH Pro and Home versions to pick from as well as the recovery console. How do I get rid of the home version without doing a complete backup and reformat of the partition.
I have a Compaq presario v2658au laptop. I wish to upgrade to a new larger HDD.I have lost the single copy of the xp operating system that the laptop allows me to make from the backup partition.I have tried to copy both the active partition and the backup partition using Norton Ghost. Both times it did not allow this.How can i copy either of these partitions or get the laptop allow me to make a fresh copy of xp.
Hi, does anyone know of a method to undo the deletion of a parittion that was deleted using Disk Management in XP? Partition Magic wasn't opening correctly, so I used Disk Management to delete a 1 GB swap (logical partition, about in the middle of the physical disk) I searched around the Disk Management tool bar and didn't see anything about "undo"it deleted instantly. No down time to process...
all located within ONE primary partition at the end of physical drive, there were 3 logical partitions: one swap, two NTFS.The two logical NTFS partitions were physically behind the swap partition on the drive. (One 12 GB NTFS partition immediately behind the swap, and a 30 GB NTFS partition behind that) When the swap was instantly deleted, it also *instantly* deleted the 30 GB partition ( < 1 GB free) It left the 12 GB NTFS partition (also < 1 GB free) alone.
my plan was to format & partition hard disk, re-install windows xp sp2.but needed to back-up my stuff, isn't working though, doesn't matter what software i try and back-up with, first disk burns ok but second disk always say's read error back-up failed. (sorry i cant remember the read error number) can anyone help?
I have an XP boot disc that I created when installing a while back. Part of what is on this, is an image recovery piece. Trouble is, it would not read the image I had, apparently did not support the file that I had.What type of file will Windows read and restore.What software will create the file I need
I work at a computer repair shop and am trying to find an easy way to do something that normally takes me a long time.I want to take in a customers somputer who has multiple user accounts, backup those accounts without backing up the entire registry (entire registry backup would in effect "backup" most problems i am fiing), then do a "destructive recovery (totally reinstalling their OS, and then somehow restore all of their old user accounts and the associated settings, my documents folders, etc.NTbackup will allow me to backup all accounts to an eternal HDD but it wont restore them if they are not on the newly installed OS.
I have an interesting problem regarding SP3. When I install it, my PC won't boot unless into safe mode, however it runs so slow it takes an hour to start up. I was able to uninstall SP3 and my computer went back to normal. Also, I would like to attempt to slipstream an HP recovery partition with SP3. My last attempt wasn't successful, but I haven't tried very hard. I have an extra HDD so I should be able to copy the partition to that and mess with it there while leaving the regular partition intact. Has anyone been successful with something like this in the past?
A friend's HP 713 was badly trashed by trojans (various) making it just possible to get the user data off and ready to use the HP_Recovery process to re-install Windows XP and the standard apps. I started everything going OK and then we encountred an electrical blackout.When power returned and I powered up, the dreaded "hal.dll is missing " came up. I used the windows XP SP1 CD I had received with my HP laptop to successfully re-install XP but I haven't got the correct calls (short-cuts) to activate the HP_RECOVERY and I am not sure that the root directory of HP_RECOVERY is still OK..There are several folders one called MiniNT which has within it a system32 folder.I suspect it is a cutdown windows system that rebuilds the real system.
I got a HP a year or two ago and it doesnt have any recovery CD's but a recovery partition on the hard drive. Everytime I recover my system it recovers the OS with all of the junk trial software. I'm just wondering if there is anyway to extract just XP from that partition so that next time I have to recover I don't have to spend hours uninstalling and deleting all that junk. That partition is filled up with over 6gb of of stuff...XP fits on a cingle CD so you can imagine how much crap I have to put up with.
I run windows XP on a HP Pavillon DV2000 Laptop.I recently tried to configure my partition to dual boot with linux Ubuntu.Everything went well and worked except that now I cant do a system reinstallation using HP's software in XP.He just can't find the recovery partition.It say's the recovery partition can't be found and no software is available to reinstall system.but wether I open Easus partition master or Partition Magic,I see the HP_Recovery partition but no letters is associated to it.
On my laptop I have Windows xp Media center edition and I want to reformat the hard drive and reinstall Windows xp Media center edition. The problem I have is I don't have a disk for it. The Windows xp Media center edition is on the D drive (HP recovery) Normally I seen it on the bootup menu ( hit a key to recover) but it is no longer there. Also if I go to my computer and hit the d drive it tells me I can't get on it because its the recovery partition. What can i do to get to that partition?
I inadvertently resized my windows partition. When I attempted to reboot, I got a hal error. The HP recovery utility then partially ran, but disk 2 is missing from my recovery cd's. because that is not what I wanted to do. I tried booting the recovery console and running FIXMBR, but that didn't work either. I looked at the drive with Knoppix. It shows the HP recovery partition and also shows a partition that is hidden. Looking at the drive on my roommates laptop, the recovery partition is visible, but not seeing the other partition
Have a friend with a really screwed up hard drive; need to reformat C: and do a clean Win XP reinstall. Am not familiar with the way HP sets up their computers with C: and D: partitions, the D: partition being the "recovery" partition. I first thought I could use that to restore the HD to what was there when the computer was purchased in 2005, but it appears that the only items in the recovery partition are the original application programs and drivers -- no Windows OS.
So, my first question is, have I missed/am not seeing that Windows IS on the recovery partition and that running the recovery program will wipe C: clean and reinstall everything INCLUDING Windows XP. . . or will it just reinstall the original applications and drivers, but leave everything else as is?
2nd question: If the recovery partition does not include Windows, will I encounter any problems if I reformat C: to wipe it clean and reinstall XP from a genuine MS Win XP CD, then use the recovery partition to reinstall the original applications and drivers?
i want to restore my computer to its original configuration. i know the in the partition named -: (yeah, its like that) lies the information for it, but the computer on startup will not give me that choice (like pressing f10 to restore)... my question is "how do I restore manually using all that data in there?" any thoughs or comments welcomed
I was running on Windows XP SP2 working fine for me. Last week when I connected to the internet while browsing may be some virus came into it and my Laptop (Acer Aspire 5050) start malfunctioning. I decided to install windows XP SP2 again, while installing it started formatting my hard drive without prompting for it in the mean while it got restarted and I lost my whole data. I again repartitioned it and install windows XP some how.
The way my recovery partition works on my netbook is when it was first used (I didnt not use it first) is it creates an image of the system when all the system has been setup then when ever I have to use the recovery it used that image to just overwirte and replace everything.I have access to the partition where the Recovery is stored and I have my Recovery Disk but as its a netbook I have no Drive, I can copy the disk files onto my Pen drive (if my pen drive is big enough)
I want to know if there is anyway I can change it so I can use the recovery and do it from scratch like when it was first turned on (first use) because there are setting there and other items that I want to change. If I could do it by editing the files in the partition that would be easier but I can try and use the disk if needs be?
I had a ntfs file partition poo on its self. i moved the disk to another computer and it can see the disk but partition magic only sees it as an "other" partition. is there any way to repair it enough to get some irreplaceable files off of it. or is there a recommended program. i plan to wipe it after that and do a clean install
I asked my local rep for a XP mce sp2 cd, as none came with my machine (recovery partition). He informed me that he could, for a nomonal fee, supply me with such a cd but with a different ket No. on it. I then asked the obvious question: If I use the key on the side of my machine, which I'm sure I must, will that cd then, work for me? He said he was'nt sure and would get back to me. I'm just wondering what are your thoughts on this?
let's just say me and my PC haven't been getting along very well lately . In the last 2 weeks I've successfully fought off a nasty CWS infection, subsequently upgraded to XP SP2 and all the latest patches, and now this. I was using the machine yesterday morning, and it was exceedingly sluggish. Task Manager showed that TurboTax which I'd left running wasn't responding. I repeatedly attempted to close TT, and 2 minutes later it finally closed. Instead of rebooting immediately, I went to IE to browse the web. A few minutes later the machine came screeching to a halt. No BSOD, just frozen.
I resigned myself to using the reset button. On the reboot, the machine started to load XP, then reset on its own back to the BIOS splash screen. I attempted to reboot normally, same thing. Last known good configuration, same thing. Safe Mode, same thing. So, XP is hosed. I loaded the System Recovery console and started looking around. Dir reports a problem enumerating directories on C:/. Chkdisk reports there are errors it can't fix.
I'm going to go ahead and appologize if I'm a bit unclear anywhere in this post as I'm not 100% certain how to phrase what happened. Also if this isn't in the proper forum.A few days ago I got the following alerts from avast.3/4/2010 9:22:41 PM 1267755761 SYSTEM 1216 Sign of "Win32:Rootkit-gen [Rtk]" has been found in "C:WINDOWSsystem32driversNpfs.SYS" file. I clicked delete when they popped up and proceeded to attempt to restart my computer in safe mode to run mbam to get rid of an "antivirus" program that installed itself on my computer. When I tried to restart though I kept getting an "Invalid form id" error and had to do a system recovery.
Umm yea I am normally decent with pcs but recently after I let my friend use it for the weekend there are things wrong such as. Speed Slowed, Some AV software saying 146 infections. I dont know how to explain the problem. But When I go to use it now it just ignores my pressing. Im kinda getting pissed since no recovery CDs. It is Windows XP Home Edition says on sticker. Is it possible to boot the D: drive (The recovery partition) with command prompt. Or am I screwed since it just ignores me pressing f10.
I am preparing my computer for doing a full pc recovery process. I have had viruses and spyware in the past and still continuing windows errors. I want to wipe my hard drive and recover my pc back to factory HP state. I do not have any recovery discs for it. The recovery disc creator does not work and my laptop has been discontinued and they don't offer any support for it. So I will be using the recovery console partition HP has put on the computer. All of my important data is backed up to an external hard drive. Is this risky at all? Could the process error at all? I don't know if the partition could have been tampered with from all the malware and cleanups I have done to the computer. I am a little worried if something happens,
