Isolate Swap File?
Dec 31, 2005I read a tip in PCworld about virtual memory that said if I could isolate my swap file, virtual memory would/could work faster. OK, I've got room, so how do I do that? Isolate.
View 2 Replies
ADVERTISEMENT
Optimal Swap File?
Sep 5, 2006How to configure optimal swap file with 2 GB RAM - dual chanell? I have 2 systems and think that 1 GB RAM work better than 2 GB, especialy with overklock!?
View 3 Replies View RelatedVirtual Memory Swap File
May 29, 2007I've set up a 2 GB logical drive in my extended partition which I have dedicated to the Windows virtual memory swap file ("pagefile.sys"). I went into the "Performance Options" panel, clicked "Change. " within the "Virtual Memory" section, then set the size of the swap file for the logical drive. I then tried to set the size of the swap file on drive C: to zero.
View 6 Replies View RelatedSwap File - Screen Is Black Jack
Feb 11, 2007This machiene has Fedora core 6 currently loaded on the ATA133 150 gb segate drive with an AMD 3200+ 2.2ghz and 1.25 gig of ram along side a Geforce 5900xt all riding on the a7n8x nforce 2 chipset. This is a kick butt system however Vista does not support my hardware and linux is not using my swap file correctly.I put in the legal copy of windows xp sp2 and boot my pc asks me to press any key to boot from cd and upon completion the screen reads Setup is inspecting your hardware configuration. then the screen is black jack and there aint no going back I've left it up for hours. Tried booting using the BARTS ultimate boot cd, same thing. Tried a floppy boot disk and I get a similar issue. Even when trying to boot from a USB I have trouble. But Fedora core still comes up fine and I can boot into that setup.
View 1 Replies View RelatedSwap From One HD To Another
Oct 27, 2009I want to move all the files i want to keep from the C drive to the F drive. Can i just cut/paste everything (including the windows folder) to the F drive or will this cause problems?
View 3 Replies View RelatedSwap OSs Between PCs
Dec 28, 2007I've got 2 PCs, one running XP Home, and the other running XP MCE. I'm planning on swapping the roles of these PCs, and am wondering if I'm going to run into activation problems once I'm done formatting/reinstalling windows on each of these machines.Think I'll end up having to contact MS? Will they let me do this without having to purchase new keys?
View 5 Replies View RelatedSwap OS Between Two Computers
Jan 26, 2008My daughter has XP Pro on her laptop and I have XP Home on my laptop. Both are legal and registered but we'd like to swap the operating systems. Hers is a smaller, slower and older machine then mine so there shouldn't be any hardware problems or capacity issues.
View 7 Replies View RelatedCan Swap Licences Between 2 Pcs?
Dec 17, 2008I have xp pro on my laptop and xp home on my computer. however, in order to use the windows remote acess service my host computer (home) must have xp pro. Is there any way to swap the two licenses without wiping my computers and reinstalling?(Some of you will doubtlessly mention other remote access programs such as LogMeIn, etc. I've considered those but they are not my first choice, which is why I am wanting to go down this avenue before I default to a 3rd party client such as logmein)I've considered asking Microsoft but they charge up the a sshole.
View 1 Replies View RelatedSwap Out A Hard Drive With OS
Jan 9, 2007I am running XP pro on my CPU 2 drives C: & D: C his 30 gigs and has the operating system with all my program files. i am down to 600MB of space and it is making my pc sluggish. i have tried to move and delete any files i do not need but i am still very low on HD space.My D: drive is 80 gigs and has plenty of free HD space.can i switch my files from C over to D including the OS? In other words can i just copy everything over from c to d and make my D drive my boot drive with out having to reinstall my XP os?
View 5 Replies View RelatedHow To Swap Drive Numbers?
Apr 12, 2007I have two LaCie drives one is allocated as drive F and the other as drive G.I want to swap them so that drive F becomes drive G and vice versa - can I do this?
View 3 Replies View RelatedSwap Space Usage
Oct 17, 2007I'm not sure if this is the right place for this question because it's not exactly a problem, but why is my system using 250 odd mb of swap file space when it's only using 67% of physical ram? I think I must have misunderstood the way it works because I thought that swap space was used when you 'run out' of physical ram, and that it was undesirable because it is alot less efficient using the hard drive for memory.
View 3 Replies View RelatedFail On Mobo Swap
Feb 4, 2008I recently had motherboard problems with my computer.Swapped the motherboard for one given to me off a forum.The problem now is that on boot I get past the windows splash and get the BSOD.The error code was just a hex code for which google was not my friend.I could boot in safe mode (without cmd prompt or networking only), but I could not work out what the problem was.I have compounded the issue by using the XP install disc to perform a repair.All that has done is made it so i cannot boot in safe mode at all now due to the setup restriction with safe mode.I believe this is all to do with motherboard drivers that I need to fix.I probably need help in canceling the repair, and how to clean out the existing drivers.I have in the meantime installed Ubuntu to allow access to attempt repair.I would prefer not to have to do a full reinstallation if could be avoided.
View 1 Replies View RelatedSwap User Registry?
Jul 17, 2008I have just reinstalled Windows XP Pro on my PC and need to find a way to get my programs from a user that is no longer recognized by windows to work with my new user. The first thing I thought to do was copy the registry from the old user and replace the new one's with it, but I'm not sure if that would work, or how to do it.
View 2 Replies View RelatedSwap Compaq To Hp Pavilion
Jun 22, 2010i just want to ask how much if i swap my compaq to hp pavilion
View 1 Replies View RelatedMotherboard Swap On System
Aug 31, 2005My main XP Pro machine failed last night, with symptomology consistent with an actual failure of the motherboard. I'm going to try and attack it methodically tonight, but realistically I think the board will be "pining for the fjords.".I would like to take the primary disk from that machine, and cable it into the
old backup desktop machine in place of that machine's primary hard drive while I figure out what to do. That way I won't have to spend major amounts of time getting the Outlook .pst file moved and configured, not to mention all the other relatively important stuff sitting on that main machine.When I've done that in the past, that has always required a reinstall of Windows because the motherboards are totally different architectures and obviously take a different set of drivers and dlls and what have you.But I have a hunch this is not necessary if one knows the right tricks or perhaps how to run the mysterious Repair console.
Can anyone talk me through what I need to do in order to stick a hard drive with a good, running XP Pro installation onto a foreign machine? A second question: I run a small network at home cable modem into SMC .Barricade 4 port hub. The failing machine connects to the hub, as does a wireless router. I've found that when my primary machine is turned off (or in the case of this failure, is dead) that none of my networking works wired or wireless. I had to cable the backup desktop machine directly into the cable modem in order to have any connectivity. Just wired into the hub it waits forever for an IP address. I just don't understand what the main machine has to do with the networking process thought that was the job of the hub.
Swap Memory / How Much Is Needed?
Aug 18, 2009I've recently switched from Linux because it overheated my laptop. I installed Win XP SP 3. I partitioned my hdd in only 2 primary partitions, c and d. I don't know how to create the swap memory, as I did at Linux installation (at the first partioning). It appears that Windows did it already, because at Virtual Memory it says: minimum 2024 and maximum 4096 if I remember well, and allocated curently it is 2024MB. I don't know if it is ok, I didn't touch anything here. My RAM is 4 GB in Bios, but windows recognizes only 3 GB.
View 4 Replies View RelatedChange O/S From Win 2K Pro To Home - Swap Over The Drives
Nov 15, 2008I have a a home built system running win2kpro on a twin 80 gig HDD's C & D, D is only used for backups, Can I swap over the drives Re-format D and install XP home on it then do a file transfer of all relevant data and program files from the original primary drive, once done and up and running satisfactory I aim to re-format and use it as before as a backup disk.
View 9 Replies View RelatedSp3 HDD Swap - Remove The Old EIDE Drive And Boot
May 22, 2008I've purchased a WD 500gb SATA HDD to replace the near-full WD 80gb EIDE drive. My motherboard supports SATA and using XP's disk manager I've partitioned the new drive as E: and all is well with XP recognizing both drives. I've used Ghost 9.0 to export all of the data and files to the new drive, as well as making backup image files on DVD disks. The problem is when I remove the old EIDE drive and try to boot, XP hangs up and gives me the "blue screen of death". If I put the old drive back in, life's good again. I'm assuming that XP is hanging up because my SATA drive is still labeled E:, and XP's disk manager won't let me change E: to C:, or at least I can't figure out how to do it. I've got two questions: Has anyone used Ghost to export data from one disk to another disk, and is it OK to assume the transfer got all of the files required to make a boot disk? And, is there a work-around of some sort to make XP recognize my SATA drive as C: and boot from it?
View 9 Replies View RelatedHow To Install Primary Hard Drive Boot Swap And Compatible Partition?
Mar 20, 2007I installed gentoo on my primary hard drive and have boot, swap and root partitions on it and they take up the whole drive. I want to install windows on the secondary hard disk but it is saying it needs a compatible partition on the primary drive but it is already full!
View 8 Replies View RelatedOutlook Pst File Corrupt / Errors Have Been Detected In The File File Path
Oct 7, 2009when I start my ms outlook 2007 I get this error. "Errors have been detected in the file 'file_path'. Quit all mail-enabled applications, and then use the Inbox Repair Tool." I tried to scan with scanpst.exe but it went in vain.I tried it with other applications it worked fine.But,the problem is they all are demo versions and I gets back only 5 to 6 mails for more mails i have to buy that applications. Do we have any free tool that can fix my problem or any other way to fix this.
View 2 Replies View RelatedFile Protection Shows Replace File With Unrecognized File
Sep 15, 2007Running Disk Cleanup, when this Windows File Protection comes up saying a system file has been replaced with a unrecognized one. It wants me to put in my Operating System CD, but I don't have one. I bought this computer and the required files are already on the computer. So what should I do?
View 7 Replies View RelatedDouble Clicking The Actual File - "windows Cannot Find File File Name.exe"
Sep 19, 2005When double clicking the actual file, Windows reports "windows cannot find file ... <file name.exe>"
This is only SOME exe's. Particularly, older programs. Word, excel, WordPerfect all work. Older apps don't.
I've tried the exe fixes on dougknox.com site and kelly's corner XP fix.
Blue Screen: Registry File Failure; Can't Copy Corrupted File To Tmp Directory
May 29, 2006I'm in the process of repair/recovery of my machine (Dell Inspiron 8500 with Windows XP Home, Service Pack 2). I'm following exactly the instructions in:
http://attachments.techguy.org/attac...chmentid=62075, but a problem has developed. The "software" file (which is the file that the original blue screen error message says is "corrupt, absent or not writable") will not copy to the new tmp directory to create the backup. My understanding from the article is that this backup file (software.bak) will later be used to restore correct settings for various software applications. Since I can't copy it, it appears that I am screwed,
File Opens With Wrong Program - Bad File Icon In Explorer View
Aug 3, 2007I recently had to do a system restore and now my .jpg and jpeg files have a bad file icon. They still do open with the windows pic program as I want them to - but only on the admin accout, I usually surf and play and do everything else with a user account, and even if I reset everything under folder options for the file associacions it somehow doesn't apply to the other account.
windows tells me in the file association menu that I changed the file association's properties and can set them back to standart "photo suite 6" - a program that I uninstalled ages ago
Start Safe Mode Cannot Delete File - Source File Not Found
Mar 20, 2007I read the advice to start in safe mode to delete files that gave the errror message cannot delet file - source file not found. They wouldn't delete in Safe Mode either. I am trying to delete mp3 from my c drive because I have an external disk where I have my music library. I can delete them one at a time without getting the error message but not a bunch of them. Some of them I have been able to delete in a bunch.
View 14 Replies View RelatedPC Wont Boot Up Error Message:missing File Repair The File Using The Install Disc?
May 7, 2006PC wont boot up any more , it says there could be a currupt or missing file , it says its config system and says it might be able to repair the file using the install disc. i have a System Recovery CD-ROM
View 1 Replies View RelatedCannot Delete File: Cannot Read From The Source File Or Disk In Recycle Bin
Sep 1, 2010I have files in my recycle bin. My recycle bin shows nothing when I open the folder but there is 6 items in the folder. I have tried to delete them through C: ecycler but when I try that I get an error on the bottom of my screen that says The file or directory is corrupted and unreadable.
View 2 Replies View RelatedCannot Delete File: File System Error(1148), WIN2K
Apr 16, 2005I have a user with a home driectory that has created a folder with mutliple folders within it. I am not sure how far the direcroty goes, but I have counted to at least 26 directories deep. I cannot delete the parent folder in either explorer, or from the prompt. At the prompt I have tried RD foldername and it says, "Folder not empty". Tried del foldername*.* with no error and still cannot delete it.
View 6 Replies View Related:cannt Delete File: Cannot Find Source File Or Disk
Mar 20, 2010I am running windows xp sp3. I tried to uninstall Frost Wire, via add or remove programs. I noticed that after it supposedly uninstalled from the a or r file the shortcut was still listed on my desktop. So I searched for F W and found a few references that popped up after my search. When I right clicked on them and tried to delete, that is when I received the above error message
View 2 Replies View RelatedBatch File To Copy Single File To Multiple Places
Apr 20, 2010What I want to do is create a .bat that will copy a file to several locations(all within the same folder, however with different names).
I have a folder that contains the master copy of my db and I want to run the batch file to update the users db files. The reason being is they each use thier own front end.
Saved Wrong File, Closed Program Without Saving Right File ?
Apr 22, 2005I was doing some detailed drawings in photoshop, and I also had a generic photo up in photoshop as well. I went to save my drawings, but apparently accidentally saved the photo under the drawins name and then closed the program. This morning I discovered the bad news. Is there a way to get that drawing back? I do not know if it was ever saved before.
View 1 Replies View Related