Sp3 HDD Swap - Remove The Old EIDE Drive And Boot
May 22, 2008
I've purchased a WD 500gb SATA HDD to replace the near-full WD 80gb EIDE drive. My motherboard supports SATA and using XP's disk manager I've partitioned the new drive as E: and all is well with XP recognizing both drives. I've used Ghost 9.0 to export all of the data and files to the new drive, as well as making backup image files on DVD disks. The problem is when I remove the old EIDE drive and try to boot, XP hangs up and gives me the "blue screen of death". If I put the old drive back in, life's good again. I'm assuming that XP is hanging up because my SATA drive is still labeled E:, and XP's disk manager won't let me change E: to C:, or at least I can't figure out how to do it. I've got two questions: Has anyone used Ghost to export data from one disk to another disk, and is it OK to assume the transfer got all of the files required to make a boot disk? And, is there a work-around of some sort to make XP recognize my SATA drive as C: and boot from it?
View 9 Replies
ADVERTISEMENT
Mar 20, 2007
I installed gentoo on my primary hard drive and have boot, swap and root partitions on it and they take up the whole drive. I want to install windows on the secondary hard disk but it is saying it needs a compatible partition on the primary drive but it is already full!
View 8 Replies
View Related
Jan 9, 2007
I am running XP pro on my CPU 2 drives C: & D: C his 30 gigs and has the operating system with all my program files. i am down to 600MB of space and it is making my pc sluggish. i have tried to move and delete any files i do not need but i am still very low on HD space.My D: drive is 80 gigs and has plenty of free HD space.can i switch my files from C over to D including the OS? In other words can i just copy everything over from c to d and make my D drive my boot drive with out having to reinstall my XP os?
View 5 Replies
View Related
Apr 12, 2007
I have two LaCie drives one is allocated as drive F and the other as drive G.I want to swap them so that drive F becomes drive G and vice versa - can I do this?
View 3 Replies
View Related
Oct 8, 2008
I recently installed a new hard drive into a friends computer and installed XP Home.
I ran all the updates and service packs.
I left later that day and let him install all his applications.
I got a call tonight from him saying he really screwed up and doesn't know what to do.
I had to follow his thinking over the phone so I hope I get this all correct.
He had trouble loading the drivers for his HP printer. He would get an error saying that a C: empHP_WebRelease folder was missing. He did manage to figure out that for some reason when I installed XP it called the Boot drive "I" instead of "C"
View 1 Replies
View Related
Sep 19, 2007
I have an old HD From a system that I got rid of. I want to put it into a friends system to see if I can retrieve the files off of it and put it onto my external HD. The hard drive was the boot disk and the computer I am installing it on has it's own boot disk. If I boot up with two boot disks will there be a problem? Is there anything I need to take into account before doing this? I am planning on installing the old HD onto an ATA cable that I unplugged from the DVD drive. The HD that is in this system is not on an ATA cable, I'm not sure what it is connected to, just a small plug with a blue cable going to the mother board.
View 3 Replies
View Related
Oct 27, 2009
I want to move all the files i want to keep from the C drive to the F drive. Can i just cut/paste everything (including the windows folder) to the F drive or will this cause problems?
View 3 Replies
View Related
Dec 28, 2007
I've got 2 PCs, one running XP Home, and the other running XP MCE. I'm planning on swapping the roles of these PCs, and am wondering if I'm going to run into activation problems once I'm done formatting/reinstalling windows on each of these machines.Think I'll end up having to contact MS? Will they let me do this without having to purchase new keys?
View 5 Replies
View Related
Jan 26, 2008
My daughter has XP Pro on her laptop and I have XP Home on my laptop. Both are legal and registered but we'd like to swap the operating systems. Hers is a smaller, slower and older machine then mine so there shouldn't be any hardware problems or capacity issues.
View 7 Replies
View Related
Dec 17, 2008
I have xp pro on my laptop and xp home on my computer. however, in order to use the windows remote acess service my host computer (home) must have xp pro. Is there any way to swap the two licenses without wiping my computers and reinstalling?(Some of you will doubtlessly mention other remote access programs such as LogMeIn, etc. I've considered those but they are not my first choice, which is why I am wanting to go down this avenue before I default to a 3rd party client such as logmein)I've considered asking Microsoft but they charge up the a sshole.
View 1 Replies
View Related
Dec 31, 2005
I read a tip in PCworld about virtual memory that said if I could isolate my swap file, virtual memory would/could work faster. OK, I've got room, so how do I do that? Isolate.
View 2 Replies
View Related
Oct 17, 2007
I'm not sure if this is the right place for this question because it's not exactly a problem, but why is my system using 250 odd mb of swap file space when it's only using 67% of physical ram? I think I must have misunderstood the way it works because I thought that swap space was used when you 'run out' of physical ram, and that it was undesirable because it is alot less efficient using the hard drive for memory.
View 3 Replies
View Related
Feb 4, 2008
I recently had motherboard problems with my computer.Swapped the motherboard for one given to me off a forum.The problem now is that on boot I get past the windows splash and get the BSOD.The error code was just a hex code for which google was not my friend.I could boot in safe mode (without cmd prompt or networking only), but I could not work out what the problem was.I have compounded the issue by using the XP install disc to perform a repair.All that has done is made it so i cannot boot in safe mode at all now due to the setup restriction with safe mode.I believe this is all to do with motherboard drivers that I need to fix.I probably need help in canceling the repair, and how to clean out the existing drivers.I have in the meantime installed Ubuntu to allow access to attempt repair.I would prefer not to have to do a full reinstallation if could be avoided.
View 1 Replies
View Related
Jul 17, 2008
I have just reinstalled Windows XP Pro on my PC and need to find a way to get my programs from a user that is no longer recognized by windows to work with my new user. The first thing I thought to do was copy the registry from the old user and replace the new one's with it, but I'm not sure if that would work, or how to do it.
View 2 Replies
View Related
Sep 5, 2006
How to configure optimal swap file with 2 GB RAM - dual chanell? I have 2 systems and think that 1 GB RAM work better than 2 GB, especialy with overklock!?
View 3 Replies
View Related
Jun 22, 2010
i just want to ask how much if i swap my compaq to hp pavilion
View 1 Replies
View Related
Aug 31, 2005
My main XP Pro machine failed last night, with symptomology consistent with an actual failure of the motherboard. I'm going to try and attack it methodically tonight, but realistically I think the board will be "pining for the fjords.".I would like to take the primary disk from that machine, and cable it into the
old backup desktop machine in place of that machine's primary hard drive while I figure out what to do. That way I won't have to spend major amounts of time getting the Outlook .pst file moved and configured, not to mention all the other relatively important stuff sitting on that main machine.When I've done that in the past, that has always required a reinstall of Windows because the motherboards are totally different architectures and obviously take a different set of drivers and dlls and what have you.But I have a hunch this is not necessary if one knows the right tricks or perhaps how to run the mysterious Repair console.
Can anyone talk me through what I need to do in order to stick a hard drive with a good, running XP Pro installation onto a foreign machine? A second question: I run a small network at home cable modem into SMC .Barricade 4 port hub. The failing machine connects to the hub, as does a wireless router. I've found that when my primary machine is turned off (or in the case of this failure, is dead) that none of my networking works wired or wireless. I had to cable the backup desktop machine directly into the cable modem in order to have any connectivity. Just wired into the hub it waits forever for an IP address. I just don't understand what the main machine has to do with the networking process thought that was the job of the hub.
View 11 Replies
View Related
Aug 18, 2009
I've recently switched from Linux because it overheated my laptop. I installed Win XP SP 3. I partitioned my hdd in only 2 primary partitions, c and d. I don't know how to create the swap memory, as I did at Linux installation (at the first partioning). It appears that Windows did it already, because at Virtual Memory it says: minimum 2024 and maximum 4096 if I remember well, and allocated curently it is 2024MB. I don't know if it is ok, I didn't touch anything here. My RAM is 4 GB in Bios, but windows recognizes only 3 GB.
View 4 Replies
View Related
Nov 15, 2008
I have a a home built system running win2kpro on a twin 80 gig HDD's C & D, D is only used for backups, Can I swap over the drives Re-format D and install XP home on it then do a file transfer of all relevant data and program files from the original primary drive, once done and up and running satisfactory I aim to re-format and use it as before as a backup disk.
View 9 Replies
View Related
May 29, 2007
I've set up a 2 GB logical drive in my extended partition which I have dedicated to the Windows virtual memory swap file ("pagefile.sys"). I went into the "Performance Options" panel, clicked "Change. " within the "Virtual Memory" section, then set the size of the swap file for the logical drive. I then tried to set the size of the swap file on drive C: to zero.
View 6 Replies
View Related
Feb 11, 2007
This machiene has Fedora core 6 currently loaded on the ATA133 150 gb segate drive with an AMD 3200+ 2.2ghz and 1.25 gig of ram along side a Geforce 5900xt all riding on the a7n8x nforce 2 chipset. This is a kick butt system however Vista does not support my hardware and linux is not using my swap file correctly.I put in the legal copy of windows xp sp2 and boot my pc asks me to press any key to boot from cd and upon completion the screen reads Setup is inspecting your hardware configuration. then the screen is black jack and there aint no going back I've left it up for hours. Tried booting using the BARTS ultimate boot cd, same thing. Tried a floppy boot disk and I get a similar issue. Even when trying to boot from a USB I have trouble. But Fedora core still comes up fine and I can boot into that setup.
View 1 Replies
View Related
Sep 22, 2010
I am try to two partition drive C and drive D in my computer but only one c or d instoling. i have 4000mb hardrive,please tell me how can i instol partition in my window xp professional.
View 1 Replies
View Related
May 13, 2005
Right now when I boot my screen I have like 4 different options for what OS I want. There Windows XP (which I usually click), a Skeleton Boot (some boot screen program I was screwing with), another Windows XP (haven't used it, maybe a previous installation?), and some other windows option that my computer first came with.
Anyways, I know that I only use the first one so is there a way to eliminate the other 3 from the menu? Ideally I would like to not even see the menu when I boot the computer, I'd like it to just go through to windows. I thought I remembered seeing a control panel or some settings for that area somewhere but I can't remember where.
View 6 Replies
View Related
Mar 8, 2006
I have a dual boot system (2 hard drives) booting Suse and XP and boot up through Suse's built in boot manager which gives me the option of booting to Windows or Linux. But since I barely ever use Linux I want to delete it off the 2nd drive so I can use it for a storage drive, so I'm wondering how to replace the Windows Master Boot Record so I can just boot into my XP drive. I'm scared that once I delete/reformat the contents of the 2nd hard drive (I'll probably use Partition Magic to do this through my XP drive) that I won't be able to boot XP up anymore. So before I do anything I want to just be able to boot into XP and bypass the linux drive before I delete it to make sure everything is ok.
View 2 Replies
View Related
Nov 5, 2007
I have a HP ze5568cl laptop (Windows XP SP2). For a few years we've had trouble with the power connector. We've just wiggled the power cable to keep it connected and lived with the problem. It also gets very hot and the fan runs constantly. Yesterday when I powered it on there was no power, absolutely nothing. My husband has some electronic knowledge so we took the laptop apart and he soldered the loose part of the power connector. While he was doing that I cleaned the fan (couldn't believe how much dust was in there.When we plugged in the power cable the orange light came on so we were excited. When we powered it on all the keyboard lights lit up so we thought we had fixed the problem but.that's all it did. It went no further except that the fan kicked on.There is a clicking noise coming from the cd drive about every second with the green light flashing. I suppose it is checking to see if there is a bootable cd in the cd drive. I have attempted to change the boot order by holding F1, then F2 but it still continues to try to read the cd drive. I can't get to the screen that will allow me to change the boot order.
I also put the OS disk in the cd drive, hoping that it would start with the disk but it just clicks. Hubby removed the cover of the cd drive and I could see that the cd is spinning.There were no problems with this laptop prior to the power problem. It was really working very well especially considering the age of it.
The information in my sig is not for the computer with the problem. It's actually for an old computer which my son now has at college.
View 11 Replies
View Related
Apr 5, 2005
Is there a way to remove the COMPAQ screen that comes up when I boot up the PC? I dont want to see that anymore.
View 3 Replies
View Related
Jul 2, 2006
Installed Win XP in a hard disk and installed vista in another But I didn't like Windows Vista and just formatted the Hard Disk But now when I turn the PC on, the Dual Boot screen continues to appear How I make it disappear and make my PC only start with Windows XP?
View 6 Replies
View Related
Sep 30, 2010
I have been given the above laptop to see if I can do anything with it as there are problems. My problem at the moment is where is the hard drive and how to I remove it to replace?
View 10 Replies
View Related
Jan 22, 2006
I bought a computer for my wife and kids. Well months go by and my wife tries to install something and notices that the MAIN drive is H: not C:
I figured that it was weird but no big deal. Well I purchased a printer for her and while trying to install the software it was giving me a "Windows - No Disk in Drive" error.
I did some research and spoke to HP tech support and they suggested that I search the web for a way to change the drive letters from H: (current hard drive) to C: (supposed to be default drive)
View 14 Replies
View Related
Aug 30, 2008
I had a drive that was beginnning to squeal and i figured I could disable my drives one at a time to see which one was squealing. Of course, disabling the drives through the control panel doesn't actually keep them from spinning, so the whole thing was an exercise in boneheaded stupidity. Anyway, as soon as I disabled the c: drive the screen went blank (of course), and now when i try to reboot it complains about a non-system drive and asks me to insert a system disk. did I mention that this is a home-built system and it doesn't have a floppy, so i can't boot off the floppy? I tried booting off the XP install CD, but it won't except that either (this seems odd to me).
View 1 Replies
View Related
May 25, 2004
I installed a Serial ATA hard drive. Booted from floppy,partitioned and formatted 120mb HD,with 2 partitions.
Connected my old IDE drive and booted from Norton Ghostdisc, cloned my old drive to the new one. Removed all drives and USB card readers except the new SATA drive. Windows will not fully boot, it halts at the blue Windows intro screen. Restarted Windows, and scandisk ran, but indicated drive letter "H" not "C", so I guess the windows installation is still looking in the original place for it's files, ie. the "C" drive, that's why it won't boot. You cannot change the "System" drive letter from "Computer Management" within XP, and I cannot get into Windows anyway. Is there a "work around" for this, other than a clean install? Even then, is it still going to be drive "H"? And that means another Windows activation. How many goes do you get for activation? I tried a windows repair installation, and reactivation (wasted). Windows then worked, sort of. Lots of things were missing and programs unuseable,as they were looking for their files on "C": so I went back to square 1, put my old drive back in for the moment
View 2 Replies
View Related
