Downloaded Vista Inspirat Could Not Access My Desktop
Jun 17, 2006
downloaded Vista Inspirat, a desktop theme for windows xp, I believe it was a 32 bit program, after the exe unpacked all of the files and I restarted, i could not access my desktop. Luckily i could open task manager, and i removed inspirat via uninstall.exe in its file folder, and restarted my pc.
After restarting the Vista Inspirat wallpaper was still up, and I still could not access my desktop, or startmenu. I think maybe its a registry problem
downloaded XP update for my Dell 700M last week & since then (after restart), can't go online through my wireless router connection wireless card is OK (Dell) & connection strength is excellent but can't connect thru any of my browsers Explorer, Netscape, Firefox or AOL
I downloaded ZoneAlarm and Spybot S&D. Things worked ok until I got a little tired of all the ZA balloons popping up and went in to try to lessen the frequency of them. Afterwards, I got to where I couldn't access things that I had before the attempted change. I used "system restore" back to "pre-installation of ZA and Spybot". Things seem to be normal but I feel that I do need (i am told) of the protection that the two downloads offer. Now when I try to download ZA and Spybot and try to install from my desktop, a window appears saying that the install is corrupt.
How can I get a good install of each of these? If I can get them back, I'll just click the balloons off my screen, no matter how many times they appear. I do have a lot of posts prior to this one ( Re: Spyware Infection[in this section-3 to 4 days ago]). I am VERY computer challanged (as a few Moderators here know by now) so instructions need to be simple.
My frined i haveing some problems with her laptop witch is running windows vista. is there anyways possible to remotly access her vista? i've been up all night trying to reseach it and im not finding anything that is work. the reson i dont just go to her house is because she is a good 500 miles away.
For Some odd reason, After I downloaded an AVG free update I lost my desktop. All the profiles on my computer only show the background when you open them. All programs still operate correctly. I can open the task manager and run programs from it, but all the icons and the start bar are gone. I am not able to open any display controls, nor can I right click and get any options. I am not even able to pull up the control panel.
I downloaded a bios update from Dell. After using it, I can not delet it from my desktop. I get a message that says, " Close any programs that might be using this program and try again". This has happened to me one other time. The way I got rid of it that time was using "system restore". I would rather not do that this time.
I purchased the following system from Costco and was glad I was able to purchase the system complete without having to add components after the sale. I have tried and tried to get used to Vista (6 months) but as I am disabled and my brain doesn't always compute efficiently, I've had difficulties. Mostly with getting things recognized on the small network in my home. My other computers run XP and I wonder if there is not some conflict with the different operating systems trying to access the same files and printers? Finally I just decided to go back to XP..
I brought her computer home to use for my school work. Someone signed into the Administrative / Owner name and somehow locked it. We don't have one of those password reset disk that the Windows website says. I have a disk that says "Microsoft Windows XP Home Edition System Recovery CD/DVD" I was told if I reinstalled Windows on the computer that it would erase the entire harddrive. There are alot of pictures on the computer, not to mention Microsoft Office, that I don't want to lose. My mom passed away suddenly and while I know her other passwords, this one is different which leads me to believe one of my younger cousins was messing with her computer and did something they didn't mean.Is there anyway possible to reset the password and use the computer without losing all the pictures on it?
I actually wanted to pimp my windows XP desktop screen and I went ahead and browsed some website and downloaded some themes, I installed all the themes in my computer and found that there was a virus attack, installing all the themes and I need to format my hard drive. Sometimes I think of keeping the same old screen but its really boring and after seeing all the dock setting and the latest flashing icons XP seem to be a bit sad
I'm trying to make a dual boot system Vista/XP with my HP Media Center purchased in 2007 with Vista pre-installed. Inside Vista I created the partition for XP (disk D and rebooted with the 'XP Pro SP2' inside. After selecting its correct partition for installing it copies all files on hard disk and it reboots in order to start its installation, upon rebooting and starting first time from hard disk, it says that there is an error in the system and stops. If I install only XP on the system it works correctly even though some newest hardware is not recognized. I had already made a dual boot two years ago with a 2007 XP Student Edition and it smoothly. If it is due to the XP version being too old that maybe cannot deal with the boot record created by Vista Or perhaps such an old XP cannot recognize a boot hard disk that is not C:? Is there a way to bypass this point (perhaps fixing the boot record) in order to continue correctly the installation? Thank you, Al
I originally had Vista Business edition on my laptop and decided to dual boot with XP. So far I created a partition on the same drive (C: ) as Vista and installed XP on it. how do I choose between Vista and XP when my computer boots up? When I turn on my computer it boots straight into XP and doesn't show that menu where it gives me a choice of which OS I want to boot
Is it possible to have a Vista based system and then load XP on the same system and switch between the two. I know mac's have something similar to this but i have an HP dv7 pavilion notebook with an AMD Turion x2 Dual-core mobile RM-70 2ghz processor, 4 gb of ram, ATI Radeon HD 3200 graphics chip set, and 156GB of free harddrive space
just ordered a new pc that is on its way pre loaded with WIN XP PRO SP2. It also come with a free VISTA BUSSINES upgrade. I want to set up a dual boot system when i get my VISTA disk. should i use partition magic and set up a new partition for vista or is there a better way of doing this
I initially started with XP and created a separate partition for Vista, installing Vista on the other partition, Vista sees the (XP) Earlier version of windows. When I choose XP, I get the following error: NTOSKRNL.EXE is missing or corrupt. If I repair the XP with fixmbr - I end up screwing up Vista. Then when I repair Vista, it end's screwing up XP
does ne1 know if vista can dual boot with xp no problems yet only wonderin cuz we are very close to vista, and i want it. i cannot use my dorm room internet with vista cuz of bs security shit.
I was dual booting XP and Vista but didn't want Vista anymore. So I got rid of Vista, and that's all said and done now. Problem is, the boot loader is still coming up telling me to choose between "Earlier Version of Windows" and "Windows Vista". How to I get rid of it without using Vista's boot manager?
I'm currently running Vista on a raid 0 array, and want to dual with XP. I have two partitions, one with vista and the other that I tried installing XP on. After it finishes the initial installation and restarts it says to press any key to boot from the CD. I wait without pressing anything and than it says that there was an error reading the disk. If I remember correctly, after it restarts it goes strait into windows setup. This happens every time I try restarting, but I can get back into vista by putting the hard drive to boot first. In vista I can see the other partition where XP was installed, and inside is just a folder titled WINDOWS and it seems like all the windows files are in there
my brother in law runs xp. he asked me to help with the following problem but ive never seen anything like it. all of the shortcuts on his desktop have changed from having an icon and a link appropriate to the shortcut, eg IE explorer, Word, Skpe etc, to an icon for Kodak Easyshare. when you click on any of the icons the shortcut takes you to Kodak Easyshare. You can still access the programs by going to All programs and clicking on the program, you just cant acess them from the desktop. If you go to All Programs, select a program and right click to create a shortcut, it creates a Kodak EasyShare icon which when clicked takes you to Kodak again. Can't figure this out.
My desktop runs Win XP Pro. All drives are shared I got a new laptop that has Win XP Home. Both are connected to my network and I can see each machine on the other. I want to access files stored on the desktop to install software, but I get an error message on the laptop that I don't have the necessary ''Permissions''. How do I correct this?
i have my home computer set up so that i can use remote desktop to access my work PC.however, i am having difficulty doing the reverse: connecting from work to home.my work pc is part of a domain and thus was easier to configure...my home computer is not part of a domain.so, what information do i need to connect to my pc? do i use the IP address of the machine i want to connect to? don't know if this is helpful info or not, but my pc is connected to a wireless router (linksys wrt54g). both machines run winXP pro.
It had Windows vista in it and she had someone put Windows XP in it. It now has a virus and my friend wants Vista put back in it. I have a cd here that says TOSHIBA recovery and applications / drivers, Satellite A130/ A135 series, Windows Vista Home Basic 32-bit. I put this cd in the rom and restarted. it did nothing. just loaded XP up again.
So I have no taskbar nor icons on the desktop. Except that all works very well... I have access to the programs and all my documents via the taskmanager. I've been told, by the technicians at the shop where I had bought this pc, that they have heard of such cases often recently, but they didn't try to understand why, they just formatted the hd and reinstalled windows. I am wondering if there's a way to repair this. I've read on some forums that osme adware called "sysu.exe" , "ddm", causes such a problem, bu I haven't those apparently. Otherwise norton , and spybot s&d don't detect anything that might cause this either...
When I try to access my desktop from my laptop and desktop to laptop, I keep getting a message that says that I do not have access permissions to network resources. I set up my network, enabled file/printer sharing, and configured firewalls to allow the network. My network has been working fine for about a year now until just recently. (I didn't install anything new, and I keep both computers updated everyday.)
I just started having this problem. My computer boots up fine, but when I try to access any desktop icon, or any feature from the start button, I get the message, windows explorer has encountered a problem... then I get Dr Watson has encountered a problem, then the only thing I can do is reboot. The strange thing is, that I can access AOL by clicking on the icon in the taskbar, also Mcafee and others. The only things that work are the taskbar icons. I ran all the appropriate virus checks, spy checks, with no problem.
I have done some reading up on the internet, but I am still slightly confused about the full capabilities of a Virtual Private Network (VPN).I set my home desktop up to be a VPN server and connect my laptop to the VPN. Now, can I access my home network through any internet connection? Also, I use TightVNC for a remote desk connection. When I am connected to the VPN through any random internet connection, can I use this to remote access my desktop?
I was having problems with my XP 2005 Media Edition desktop freezing while watching TV so I uninstalled the ATI Radeon Connect3D 9600 256mb video card. It restarted no problem. I lowered the resolution to 800x600, no problem. I turned on the media center and let it sit for a bit. It froze. Now on start up I get the following: Windows could not start because the following file is missing or corrupt WINDOWSSYSTEM32CONFIGSYSTEM
one of my computers crashed, but the main harddrive could be saved.I installed the harddrive into a different computer where it is now a slave drive.before the computer crashed i had a file on the desktop where i placed alot of large files. now, when i try to access documents and settings from the new computer the folder that is the username that would contain the desktop files, i get the error message access denied, not accessable.i can access the desktop files for "all users", and another user folder i created for a friend of mine. but i cannot access the desktop files that i created for my user account. i am certain that the file that contains the files i want is on the desktop.
i recently had a couple of trojans on my computer. they started to make my computer crash alot and they changed my background to a huge warning sign..it had said warning your computer is infested with many trojans malware and adware. i ran alot of scans and now i am very sure that its all cleaned up. But when i try to access my taskmanager i cannot. i have read another thread wich told me to type in taskmngr.exe or something like that the run thing but it just said task manager has been disabled by admin. how to reenable it and i am the admin. also when i try to change my background via right click>properties>desktop where i should be able to scroll through the backgrounds is all locked up and disabled.
