Cannot Find "magic.exe R"
Aug 14, 2006
I've looked at some sites, and I'm still not entirely sure what it is. But whatever it is, I apparently don't have it. Everytime I start Windows I get an error that roughly says "Windows cannot find magic.exe." along with the obligatory "try searching for it" stuff. Out of curiosity, I did search, and still got nothing.
I've used several programs to check what runs on start up, and "SystemTime - magic.exe r" (the "r" puzzles me) is set to run once. I've disabled it, deleted it, even edited it completely to try and get it to stop, but it keeps coming back. Could anyone fill me in on what's going on? I suppose the only useful information I can give is that I'm running Windows XP SP2.
View 14 Replies
ADVERTISEMENT
Feb 19, 2009
A computer that i Am working on for a friend of mine. He doesn't have his windows XP cd and doesn't have the sticker on his computer but I know its legal. I used a Magic Jellybean to pull the key off and reinstalled windows.I've tried 4 different CD but it still won't take the key. If I call Microsoft will they tell me what version of XP Pro, SP1, SP1a, SP2 that I need to install and if now what do I do.
View 9 Replies
View Related
Mar 26, 2005
I have MS windows XP and upon booting up I get a box that says. "The Executable files in Port Magic are corrupted Please re-install
View 1 Replies
View Related
Oct 22, 2007
I was just using my PC this weekend and i tried to combine the 3 partitions in my master/primary hdd with my parition magic 8.0. After partition magic was done on its job, pc rebooted and i cant load xp anymore. have tried removing small battery, reinstalling with recovery CD and still wont load xp. i was getting diffrent things on the screen. first was that my pc hung on me when "booting to CD:" came, did something and next i got was mbr error 2, then i got disk boot failure after playing around with the PC.by the way my pc had acronis too. i figure it has something to do with it. i tried my recovery cd 3 tiems and after finishing the reinstall i still cant boot. i tried to use an xp boot disk and found that all my files are still intact and havent been reformatted.
View 6 Replies
View Related
Sep 25, 2005
does anyone know what will solve this annoying error that frequently disrupts the bootup of windows XP PRo? You can run Chkdsk from savemode and this solves temporarely the problem but time and again after shutdown this error reappears. Somewhere during shutdown it seems that the filetable(MTR?)is corrupted Partition Improperly Unmounted Error 1516 is the message.
View 7 Replies
View Related
Dec 25, 2004
I bought a Seagate 169GB Barracuda Hard drive and set about partitioning it with Partition Magic. Initially I was being advised via phone by a friend in a neighbouring country. I put the Seagate as the Master and my previous Master as the slave. (a Maxtor 30 gb hard drive partitioned into 3. IE ..2 x 4GB and one 22gb partitions.......these were configured C (4gb) had the OS Win 98 SE on it ...E (4GB) was a back up? and F (22gb) was for video files mp3,s etc) I put Partition Magic on C and proceeded to follow directions. To cut a long story short. I got the Seagate successfully formatted.
BUT
I have done something wrong. What happened was the E and F partitions on the Maxtor combined and showed up as unallocated space on Partition magic and Free Space on XP,s Disk management...Naturally I removed it till I got some advice on what to do.... I have since tryed three disk recovery programs and had a certain amount of success with one program .....I note however that from memory all the recovered files /folders are from the 22gb partition and none from the 4gb partition that combined with it.... I still have some options to try but as a beginner I thought it best to see if anybody in the forum with experience in this field could give me their advice so that I can hopefully recover as much as I can..
View 14 Replies
View Related
Feb 2, 2006
Cannot get Partition Magic * to installon my Windows XP computer.
View 12 Replies
View Related
Aug 22, 2005
I installed PM 8.05 and used it to resize C drive (WinXP OS is there).I used the auto function to take a 1Gig amount each from drives D, E and F (about 25+ plus Gig free on each of these on a Seagate 120Gig HDD) to add to the 1Gig of free space on the C drive. The PM process seemed to go OK (went into DOS(?) and went through 7 steps to resize, etc) as there were no error messages. It said at the start it was going to do FAT 32 which is what I had the drives set up as. At the end PM said it was going to reboot and then the fan was hit. The boot up stopped at the "DMI Verifying Pool Data" message and the little line cursor just sat there blinking.
View 12 Replies
View Related
Apr 5, 2008
I was partitioning my C drive of windows using partition magic so that to install Linux. my laptop(hp pavilion dv5000) had only 1 partition so I tried this stupid thing. Unfortunately power went off during partition, and now I m not able to install windows XP neither from recovery disc or from regular xp cd. Some linux (suse, fedora) and windows vista are installing fine. But I need XP disparately. What to do.
View 14 Replies
View Related
Aug 18, 2006
i have a acer t135 sempy 3300 w/ xp home,Ive tried to convert partition to ntfs its set as this 72.6 fat 32 on (c: ---and 73.4 ntfs on (d: i had a copy of partition magic from a guy at work but when i tried it i wiped hd and had to use acer restore discs
View 6 Replies
View Related
Mar 25, 2007
I'm receiving a windows -no disk error message that won't stop. I've recently installed System mechanic 7 and network magic
View 1 Replies
View Related
Sep 29, 2007
I am having a problem with my printer after installing network magic. Everytime I send a document from the main pc to the printer connected directly to it, I get a stop screen and a reboot. When it comes back I do the Microsoft error report and it says there is a problem with a driver.
View 2 Replies
View Related
Feb 22, 2006
i have a major problem. I used Partition Magic 8 last night and the program crashed halfwayn through. Now i am getting a blue screen on startup probably because of damaged sectors. I am unable to start xp to run a chkdsk or to install any partition doctor type tools I then decided to re-install my Xp. But during the start stages before installation an error comes up saying there is no hardrive on your computer. please make sure it is switched on or presesnt(or something like that)
View 1 Replies
View Related
Sep 9, 2007
Windows XP .I am trying desparately to enlarge my c drive, which is partitioned from a large drive also containing f (programs) and g (data) drives. I need to enlarge the c drive to allow proper cmptr operation.i used Partition magic , which seemed to work up until the point where it rebooted and gave me error 58 "unable to write to the boot sector. Virus protection software may be running. "I have disabled Norton Anti virus, and Spyware Dr (complete shutdown). Still no success.How do i disable virus protection in the boot.
View 6 Replies
View Related
Jun 1, 2006
i was attempting to resize my HD using partition magic i did not backup prior During the process my computer lost power. Upon rebooting i receive the following blue screen error message: a problem has been detected and windows has been shut down to prevent damage to our computer if this is the first time you've seen this stop error screen, restart your computer. if this screen appears again, follow these steps:
disable or uninstall any anti-virus, disk defragmentatio or backu utils. check your HD config, and check for any updated drivers run CHKDSK /F to check for HD corruption, and then restart your computer.
View 4 Replies
View Related
Jun 2, 2006
Recently i was attempting to resize my HD using partition magic(i did not backup prior During the process my computer lost power. Upon rebooting i receive the following blue screen error message: a problem has been detected and windows has been shut down to prevent damage to our computer if this is the first time you've seen this stop error screen, restart your computer. if this screen appears again, follow these steps:
disable or uninstall any anti-virus, disk defragmentatio or backu utils. check your HD config, and check for any updated drivers run CHKDSK /F to check for HD corruption, and then restart your computer.
View 4 Replies
View Related
Jul 11, 2009
It started when i use Partition Magic.
there was a notification error said that Partition Magic can't read my Hard Drive, because of 'drive wrong naming' (i forgot the exact word) then came up an option 'do you want to fix it?' YES/NO - I chose YES
but after that, I can't go into to windows again (Vista64) it stuck on loading process forever
- Hard Drive are detected on BIOS
- When I use another 'health' HD with this 'broken' one, then the 'health' HD won't boot either, but it will normally boot again if I unplugged the 'broken' HD
- When booting via Windows Installation Disk (tried to re-install Windows), it stuck again on windows loading
View 1 Replies
View Related
May 13, 2009
no questions. I only need the driver for sound card of My Dell latitude note book. The audio driver i am looking for is neo magic 2360.
View 1 Replies
View Related
Aug 28, 2005
recently we had power failure and when I turned my computer back on, my bios came up.I tryed to exit out but some how disconnected or turned off my second hard drive and can not get it to go in the active state again, how do I check for the missing letter E that the drive is on orfind access to this drive
View 1 Replies
View Related
Mar 15, 2008
I have a gateway 6520 gz laptop with IE6 and XPHE, I 'm on a network with two computers and use NETWORK MAGIC for the network, when I turn the laptop on it wants to display {the page cannot be displayed} instead of going online! Then NETWORK MAGIC pops-up and says {YOU ARE NOW CONNECTED} then I have to manually turn on IE6 button to go online, almost like the page {the page cannot be displayed} wants to come up first instead of the connection?
View 14 Replies
View Related
Jul 25, 2005
My existing C: drive. First I was getting the "Error 983" error. Then I un-installed SP2 which was causing a gang of problems, freezing programs for a couple mins mostly. After I got it uninstalled I did a disk defrag, then a chkdsk /f. Now I have partitioned the drive using PM8 again and this time after the reboot it is telling me it is completed but once Windows XP reboots there is no new partition.
Im trying to install Suse Linux 9.0. But I really want to have 2 new partitions, one for Suse, and the other as a back up.
View 5 Replies
View Related
May 1, 2005
I had perfectly working PC with XP Pro installed on a 160Gb Maxtor HDD.For no reason I error checked the hard drive, which the system did after rebooting, at the end of the test the system rebooted and announced that there was a error on the boot and boot.ini.Useing XP Emergency (on disk) I tried fixmbr which did nothing then I tried Fixboot. XP found the drive identified it as FAT and said that it was successfully fixed.The drive was FAT and is now unusable.Partition Magic sees it as a FAT drive as does XP when I switched the HDD into another machine.
View 4 Replies
View Related
Feb 16, 2005
How do you find the IP address on a computer and how do you keep it safe from others accessing this information on your computer?
View 10 Replies
View Related
Sep 8, 2005
I've just resized a partition on my main physical drive, and the OS sees the adjacent partition as unfromatted.
I'm using Partition magic pro 7 and WinXp pro.
The partition I resized is the primary OS partition which is formatted as NTFS, the adjacent partition is FAT32. How can I get XP to recognise the FAT32 partition again?
View 2 Replies
View Related
Sep 16, 2005
when i open Partition Magic 8 i see my Maxtor 6Y120P0 drive in a yellow color and the file system marked as "other": but my Windows 2000 Disk Management shows healty:
under windows i can read and write to the partition, so what is wrong? what does Partition Magic wants?
View 1 Replies
View Related
Dec 19, 2007
Is there a way to check in XP?
View 8 Replies
View Related
Oct 13, 2007
I removed Norton and downloaded Avira Free and ran a scan. It found two files in Doc.and settings that are now in Quarantine. They are I think FP's. One was IEhome.vbs and the other is IEenablecookie.vbs. I tried Googleing them but didn't find anything. Are they OK?
View 1 Replies
View Related
Jul 16, 2005
In Windows Explorer, where do find my Cookies
View 5 Replies
View Related
Feb 5, 2009
i cannot find my recycle bin
View 6 Replies
View Related
Sep 13, 2005
where i can find one? The comp that needs it has no floopy.
View 7 Replies
View Related
Oct 27, 2006
I am having trouble opening certain software, keep getting the message "cannot find shell.dll" I've tried to download this file off the internet but it doesn't seem to work. The programs I have trouble with are quickbooks and corel.
View 3 Replies
View Related
