my windows xp pro continually boots up with a blue screen which shows the following ***stop:0x00000024 (0x001901fd , 0x81f37828 0xc0000032 , 0x00000000) i have tried rebooting in all the methods offered by windows , using the f8 key to no avail i cannot access my computer and i am at my wits end , could someone please offer me a solution to this problem , i have rebooted using f2 to enter the bios but nothing seems wrong here.
I have a dell inspiron 6400 notebook and i have windows xp home edition installed. i am getting the blue screen error message sometime after my computer starts. and then automatically my computer restarts. however, my computer works normally in safe mode.what should i do to make my computer work correctly and i dont want to spend any money as i just bought it a few months ago.
I have a friend who has a Dell Dimension 2400. She had a blue screen error with the following parameters 0x00000050 (0xfa3bedeb, 0x00000000, 0xfa3beded, 0x00000000). She was able to reboot at the time of the error but now she's getting a black screen and can not do anything at all.
getting a BSOD every day, sometimes two or three times a day. And when it happens, atleast once in that say the computer won't turn back on. It'll BSOD and then when he goes to boot it back up, it'll load the Bios screen and turn itself back off, with no warning. Here's the line of code he gave me:BCCode : 10000050 BCP1 : B3D25FFC BCP2 : 00000000 BCP3 :BD11FD61BCP4 : 00000000 OSVer : 5_1_2600 SP : 3_0 Product : 256_1file names: C:DOCUME~1USERLOCALS ~1Temp WERb815.dir00Mini071110-01.dmpC:DOCUME~1USERLOCALS~1TempWERb815.dir00sysdata.xml
So after having an extremely long battle with my computer repeatedly restarting and restarting and restarting I got the BLUE error screen. I copied down the errors on a piece of paper and they are: STOP: 0x0000008E (0x00000005, 0x0004210B, 0xB004EC8C, 0x00000000).
I tried google'ing these codes but wasn't able to figure out what they were trying to say. I'm not sure what to do at this point Some background information. For a while now everytime I turn on my computer it will continually restart at different intervals until all of a sudden it just sticks and stays on and at that point it will work for hours on hours. However the restarting issue occurs EVERY time I start the computer. It usually stops restarting itself and works fine after about 10 minutes.
I ran MemTest86+ and found no errors. I switched out my PSU with a more powerful one (though my cousin thinks that one may be bad as well) but I don't have any extras and don't have a power supply tester laying around... I'm not sure how to check if it is my OS or possibly my board... I also don't have any extra parts
Computer keeps crashing and giving me this error. does anyone know what it means? A problem has been detected and windows has been shut down to prevent further damage to your computer. DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time your seeing this error, restart the computer. If it appears again, follow these steps. Check new hardware or software is properly installed. If this is a new installation, ask the hardware and software manufactuer for any windows updates. If problem continues, disable or remove newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safemode to remove or disable components, restart, press f8 to select advanced startup options, then safe mode. TECHNICAL INFO *** STOP: 0X000000D1 ( 0X0000000A, 0X00000002, 0X00000000, 0XA9BF66EB) *** ipnat.sys - address a9bf663b base at a9bf000, datestamp 415b3714 Begining dump of physical memory Physical memory dumb complete Contact your system administration or tech support group for further assistance. Then another time it crashed it game me the same top message, but a differn't technical info string...which is: *** STOP: 0X000000D1 ( 0X4D0FC400, 0X00000002, 0X00000000X 0X4D0FC400.
My friend got a blue screen with error message saying; A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time. Technical information: *** STOP: 0x00000024 (0x00190203,0x82346610, 0xc0000102, 0x00000000)
She can't get into windows at all. When I turn on her computer it goes to a black screen that gives me a choice to boot in safe mode, safe mode with command prompt, last known good configuration. It is Windows XP Dell Laptop. I've tried them all, everytime it just goes straight to the same Blue Screen with same message. She doesnt have a recovery cd with her.
Updated my computer using automatic updates. I unfortunately didn't pay attention to the updates that were being installed. After a restart, I got the following error:
A problem has been detected and windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen sppears again, follow these steps: Check to be sure you have adequate disk space. If a drive is identified in the stop message, disable the driver of check the manufacturer for driver updates. Check with our hardware vendor for any BIOS updates. Disable any memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press f8 to select advanced startup options, and then slect safe mode.
Man, my computer for the last two weeks have been crashing like an emo. I mean, when I play GTA: San Adreas, in 20 minutes, I get a BSOD with a stop error. When I put hardware acceleration to full, in a half an hour, I get a BSOD with a similar error. Believe me, I got three kinds of errors, and some were from different time. I believe the problem either came from the either the PSU, new 512 mb of ram, old 512, CPU, system board, or the graphic card. I'll try to post the error as best as I can. So, is there a solution to this? Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078) This is one of them, but there another one with KMODE that I can't seem to remember. Also, sometimes, after it tries to recover from a serious error, the computer shuts down during the bootup before I can choose which XP version I can choose. Also, I hate to say this, but I'm not using a legit windows copy sp1, but I have updated to sp2.
I used to be able to access it perfectly fine but i went to safe mode and got the blue screen with the 0x0000007B error. My windows works fine but the safe mode.I know it was caused by a virus, i just don't know how to fix it.I scanned with everything but still could not find it
i had XP 2008 virus/spyware, which I think I managed to get rid of with Malwarebytes' Anti Malware and System Mechanic 7. Now I have a new problem. After receiving a recent download from microsoft, upon restarting, I get the blue screen of death with this message; STOP: C000021a (Fatal System Error) The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000)
I can't get anywhere into Windows, I've done F2, F8, F12, everything I could think of without risking more damage. I've booted from the system mechanic CD with the Hard Drive recovery, and while it said it found and fixed a problem, it didn't fix this one.
After around 10-15 min after logging in a program error box opens up saying winlogon.exe fatal error then it switches to a blue screen saying fatal error c0000021a error. I have windows 2000 proffessional and a HP compaq nc6120 laptop.
Encountered a Blue Screen of Death error. The error stated that I should run Chkdsk and then proceeds to restart and bring me to the Windows boot selection screen (safe mode, last known good configuration, normally). No matter which choice I pick, it always leads to the BSOD then restarts. Since this is getting me nowhere fast, I want to just format and reinstall windows. I do not have my recovery CDs, and when I enter the BIOS to change the boot sequence I cannot change it so the CD drive is above the hard drive in priority. The reason it gives me in the bios is that "All items on this menu cannot be modified in user mode. If any items require changes, please consult your system supervisor. Any ideas on how I can boot off the cd and reinstall windows from scratch?
My computer crashed the other day and I got the dreaded BSD. I managed to reinstall the operating system which is XP Home Service Pack 1 on a CD drive that is not working correctly. I have managed to reinstall drivers so far but that is as far as I have gotton besides the reinstalling the OS. I have a friend who is 120 miles away and unavailable during the day that is trying to assist me, How do I go about getting back on the internet, I have highspeed internet access thru Comcast. I am leaving the wireless alone for now and just trying to connect thru the modem cable alone now but nothing is happening, when I try to connect thru the cable modem the browser is not working. I had Firefox before instead of IE.
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
The start of my problem is that I was receiving an error 'cannot initialize lsass.exe service'.After repairing XP SP2, the following is displayed every time that I boot:SAFE Mode - black screen with 'safe mode' in bottom corners of screen Windows Mode - blue screen.The mouse is responding.There are no icons.There is no text (except for 'safe mode' as above)CTRL/ALT/DEL does not display task manager.CTRL/ESCAPE does not display anything.Clicking on various parts of thescreen has no effect.I have replaced Explorer.exe from c:i386
I couldnt start up windows. It would hang at the windows loading screen and go no further. So I was told to try a repair-install. And thats where even more trouble has started. So I started to repair-install. During the Windows Install setup, it gets almost to the point of being completed, but gave me a blue screen error STOP message at around the "18 minutes left" mark. During "Registering components". It would do this every time at the same spot. So I searched a bit about how to solve the problem. One suggestion I found on the interwebs was to try it with only one stick of ram installed, I have four overall at 2gb. So I tried that, next time I boot up to the comp, it loads up the bios, and then goes to the black windows loading screen with the loading bar, then starts with a blue screen saying "Setup is being restarted" So I figure its restarting my windows installation since it never was completed, after that message, the screen goes black with a cursor, and stays that way forever. I immediately put all the ram back in, and no luck, same thing. I tested each individual ram stick, same thing, just goes black. So now, I can't even seem to re-install windows. Did my hard drive just crap out? Some hardware issue? Im already thinking about buying a new fresh hard drive, installing windows on there, and just moving all my files from the old hard drive over to the new one. Though that would be a pain, I really want to save my current drive! And all the data on it.
I have seen a similar problem posted previously on this forum. But after reading it i think this is a different problem, so, here goes: I recently bought a new graphic card: Radeon all-in-wonder x1800xl. Installed it on a clean system (did a reformat before i installed). The problem occurs after usually 30-60 minutes of gaming (so far with oblivion, black & white 2). The game freezes for about 30 sec and then goes into blue-screen mode.
The message is as follows: Kernel-Data-inpage-error stop error screen then there are a lot of numbers etc. I have sometimes noticed a slight change in fan noise prior to freeze (speeding up) After reebot everything's back to normal.........
Recently we've been getting "Blue Screen Errors" on our Windows XP. The most common one is called "Blue Screen error caused by a device or driver." Since they mention a likely hardware or software problem, I suspect our computer screen or speakers might be to blame. A couple months ago, we hooked up a screen and speakers from different brands. I think the screen's brand name is Westinghouse and the model number is LCM-17v8, and I think the speakers brand name is The Digital Experience inc., Model number gem 2.0 USB.
We've also gotten other error messages along with this one, such as "Address a problem with your computer", also strongly suggesting a problem with hardware, and "Troubleshoot a problem with your audio software". Is it possible that the screen or speakers may be incompatible with the computer, resulting in these errors, or would it be something else?
I was playing a game and I rebooted my computer. When i went to start it it went to the a blank blue screen before the account screen in the beginning of XP. I know i can restore to new but i will have lost so much information that it would take about 3 months to retain it all back. It says it can not find operating system. I need help in a serious way. all advice and solutions are requested.
I have a Prolink Hurricane 9601C Modem. It has two LED's indicating Power and Link. As of recently, the Link LED, starts to flash on and off, and all network connections get terminated. The Driver software of the Modem stops responding. I tried to unplug the network cable and re attaching it, but nothing happens.... The System will not shutdown either. Once windows logs off, I get this Blue Screen Error.A problem has been detected and windows has been shut down to prevent damage to your computer.
For the last three days I have been getting a blue screen error, the only thing I have done is ran Softwar inspector Secuna, and uninstalled Abobe Reader and reinstalled the updated version.Error message: A problem has been detectd and Windows has been shut down to prevent damage to your computer.KERNEL_STACK_INPAGE_ERROR If this is the first time you've seen this stop error Screen, restart your computer. If this screen apperas again floow these steps. Check to make sure any new hardware or software is properly installed. If this is a new install ask your hardware or software manufactor for any windows updates you might need. If the problem continues, disable or remove any new installed hardware or software. Disable BIOS memory options such as coaching or shadowing. If you need to use Safe Mode to remove or disable components restart your computer. Press F8 to select Advanced Start up Options, and then select Safe Mode.
I am running XP media center 2005 and it is a pretty fresh install. All of a sudden today I am having crashes and the one blue screen I got had this code on it - STOP: 0X0000008E(0XC000005, 0X805AE8AC, 0XA55DEBDC,0X00000000)
I've recently put together a PC and for the first 3 weeks it was running perfectly. Then in the past week, it started crashing completely randomly it seems. No error messages or blue screens, it just auto restarts. On reboot, it has an error log (the following are 5 examples out of about 10 crashes so far) Ex 1 Error code 1000008e, parameter1 c0000005, parameter2 c0384dc0, parameter3 ebf4e4ec, parameter4 00000000. (This occurred when I was finishing an installation of iTunes..don't know if that's of significance?) Ex 2 Error code 1000008e, parameter1 c0000005, parameter2 c038d724, parameter3 ecb494ec, parameter4 00000000. Ex 3 Error code 1000008e, parameter1 c0000005, parameter2 804e7fc2, parameter3 ec2dc4e4, parameter4 00000000. Ex 4 Error code 1000008e, parameter1 c0000005, parameter2 c038c2f4, parameter3 ec94189c, parameter4 00000000. Ex 5 Error code 1000008e, parameter1 c0000005, parameter2 804e7fc2, parameter3 ec4da4e4, parameter4 00000000. I've not installed any new hardware in the last week nor any major programs. I've got no spyware (according to spybot). Norton windoctor reported a missing msvcr80.dll (i realise i can't just add this .dll back into my system...plus I'm told it's a necessary .dll for office 2007 and .NET 2.0) Any idea what my problems could be?? PS: the attached jpegs shows the errors windoctor comes up with
I have XP Media Center on my desktop and got a BSOD the other day. Unfortunately, I didn't copy the error code on the BSOD down. Now, whenever I try to open IE or iTunes or just about any program, the cursor just stays in the 'working' mode and the computer never does anything else. I can't even restart it via the Start menu. I have tried to do a system restore, but the pc freezes just when I click on 'next' to start the restore. I've even tried the system restore in safe mode with command prompts and got the same result. I ran Spybot, Ad Aware and AVG in safe mode, but they did not pick up anything. Not sure if that is relevant to my problem... Is there any way I can force the BSOD so I can get an error code? Does anyone have any idea what might be causing my problems?
When it happens: Usually when I play a game from Warcraft to Teamfortress 2 and once even a flash game. The sound stutters, blue screen flashes up and then computer reboots. And now im out of ideas. Any suggestions?
I was away for about 2 weeks and left my computer on. Judging by the virus check log, on the 30th June my computer crashed out. When I returned I rebooted and set it up so that it went to the BSOD to give me an idea what was happening. In the last 3 days I've had about a dozen crashes. The first few went to BSOD with various messages (page_fault_in_nonpaged_area, driver_irql_not_less_or_equal, etc.) I looked up the message but nothing applies, since the computer was untouched during my absence. I thought maybe memory was corrupt - I have 3X 512MB slots filled. I've used each memory block in turn and each time I've experienced a crash, so I'm not sure about that any more - can all 3 be corrupted?!? Plus I'm now crashing straight to total death now (black screen, unresponsive, tho computer-power light still on) rather than BSOD. The crashes come irregularly - sometimes in 5 mins sometimes in a couple of hours. They "kind of" correspond with heavy CPU load but not always.
Did a check on my C: for errors, on step 4 it stopped at 19% saying there was an unspecified error, not enough memory to repair bad clusters detected in file 24971.Worried about virus, but it crashes before I can complete a test HELP.
