Upon Starting Installation A Black Screen Came Up Saying There Was Corruption
Aug 22, 2008
I'm currently trying to reinstall XP onto my Sata hard drive. At first I reformatted the existing partition using the longer and more through option. Upon starting a black screen came up saying there was corruption. I attempted to reformat it once more Via the XP install setup, and the drive was not listed. After reformatting the drive once more on another computer, attempting to boot off the CD results in "NTLDR is missing". As a result, I unplugged the SATA cable from the hard drive, and reinserted it while windows install was loading.
View 1 Replies
ADVERTISEMENT
Jan 8, 2007
I have a Dell Dimension 8400 Desktop computer and whenever I start the computer up it goes to a blank black screen with a flashing bar in the top left hand corner. Usually it does this for a second and then continues to load but it jus stops there and the computer isn't working or anything.
View 1 Replies
View Related
Nov 13, 2009
When I start up, I get the blue windows screen saying it needs to "check file and folders," but at the bottom of the screen where it gives the percentage scanned, it stays at zero, and after a couple of minutes, goes to a black screen and and says "machine_check_exception STOP:OV000009c,."whatever that means. If I hit anything on the keyboard (on the first screen) before it attempts to scan, it starts up fine, and runs fine. I tried defrag and doing the "correct error" thing from the Properties tab in My Computer C Drive. I used to get this if the computer was not shut down properly, but it would scan up to 100%. Now it does nothing. how to correct this, or should I expect the whole thing to crash if I keep using it this way?
View 17 Replies
View Related
Oct 2, 2006
A friend gave me a laptop, my problem is that it came from Japan thus everything is japanase thus I can't hardly use it. The reason I accept it is bcoz he said I can try to reinstall a win xp with english version (btw, the OS is win xp pro in japanase version). Thus I bought win xp pro sp2 and try to reinstall it, so I reboot fm cd rom and while the windows setup is starting, the system stopped and the message on my screen read as:A problem has been detected and windows has been shutdown to prevent damage to your computer.If this is the first time you've seen this error screen, restart your computer. If this screen appears again follow these steps:Check for viruses on your computer, resume any newly installed hard drives or hard drive controllers, check your hard drive to make sure it is porperly configured and terminated. Run CHKDSK/F to check hard drive corruption. then restart computer. how in the world I can follow the above steps if everything written on it are in japanase language? I also try to visit the manufacture's website, thinking that perhaps it help solve the problem but....i also need a japanase translator to understand it.
View 14 Replies
View Related
Nov 6, 2009
I want to downgrade the factory loaded Vista to XP pro on my Acer Aspire M5640 desktop. I found some detailed instructions on line for doing this, but I don't get very far before I get a blue screen error message while the computer is in the process of booting up from the XP disk and loading the files while in windows set-up mode. It reads as follows: "A problem has been detected and windows has been shut down to prevent damage to your computer.
"If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: "Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer. Technical information: STOP: 0x0000007B (0xF78D6524, 0xC0000034, 0x00000000, 0x00000000)
View 1 Replies
View Related
Apr 30, 2006
A new 250 gig seagate SATA 7200.8 hard drive and a win xp home upgrade edition. enabled SATA in BIOS, connected SATA cable to SATA1 on mobo, BIOS didn't recognize the drive, connected to SATA2 and BIOS did recognize drive so I tried to partition and format using Seagate's DiscWizard from floppy. Things seemed to go fine until I got a message that format wasn't completed because of some error.I went ahead and tried to install from xp cd, loaded SATA drivers from floppy, cd started loading but then hangs up at "setup is starting windows"I've never used SATA before.
View 7 Replies
View Related
Jun 8, 2008
Basically today I bought a 250gb hitachi sata HDD, dvd drive and computer case, got home, assembled the lot. worked fine. Got my Win XP SP2 installation cd and stuck it in the drive... and started to boot it up... it read the disk just fine, but for some reason every damn time it gets to (Mylex EXR2000, 3000/AR160, 170, 352 Raid Controllers) at the bottom of the screen it just stays there and never progresses.
It's causing me so much hassle. I went into the BIOS, turned off all RAID related options since he doesn't even have a RAID. Then that did nothing, figured I would get rid of the SATA drive for now incase that was the issue, put back in the old IDE 20GB drive... same thing happened. Got another Win XP installation disc that i've used loads of times with no problems... but that one came with it's own error.... a missing file apparently? Anyways the PC is sat downstairs with the old 20GB IDE drive in it and the CD drive and not much else really. All raid options in the BIOS are disabled and my mind is falling to pieces.
View 14 Replies
View Related
Oct 28, 2008
its my previously-formatted HP Pavilion dv5201tx! The problem is as the title above. I can go into safe mode. I've used system restore twice. And in Documents and Settings folder I noticed it has:
Administrator
Administrator.computer description name
Administrator.computer description name.000
username1
username2
Is it creating more user folders? At some point Administrator.computer description name.000 wasn't there. Corrupted registry hive? I'm not sure! Restarted many times, used Last known good configuration, and it's still black after the boot screen. Please help!
View 4 Replies
View Related
Jan 19, 2007
My laptop has started to freeze at times,then the screen would blackout then appear with a black screen with a blue box inthe middle giving BOOT DEVICE OPTIONS Hard Disk Drive, CD-ROM/DVD, Floppy Disk Drive, LAN Boot it froze blacked out and now keeps going to this option page ,where as before if you turn off then on it rectified itself.
View 7 Replies
View Related
Jul 17, 2005
when I turned on my computer and got the blue screen of death, so I restarted my PC. Then a black screen came up saying "Windows could not start beacuse the following file is missing or corrupt : windowssystem32configsystem."
You can attempt to repair this file by putting the winxp cd in etc...
Now when i turn on my computer there is just a black screen showing, with nothing at all on it.
Any ideas?
View 3 Replies
View Related
Nov 10, 2006
i get this error when i tried to open up my computer, first the windows xp loading screen works fine, then after that the screen just goes black and stays like that forever. this happened when i tried to uninstall a USB Bluetooth driver and it was requested to restart my pc so i did, and after that restart i cant get in no more, the screen just goes black after the windows xp load screen. im wondering how can i fix this problem? please help me guys... thank you.. and o yeah one more thing.. when i tried it on safe mode it went to the welcome screen but after that when i try to move my cursor i didnt move at all then i restart my pc again and the whole thing happens once more
View 4 Replies
View Related
Jul 20, 2005
friend whose computer has crashed the screen had frozen. He could do nothing except reboot it using the power button but on rebooting, there was a 'no signal' message on a black screen. We have checked the monitor connections (the monitor works when connected to his second computer) and even replaced the video card but of course this made no difference (no signal) We've taken out the HD and installed it on his second system. Does this mean that the most likely cause now is the motherboard/bios or is there something wrong in our approach/deductions
View 5 Replies
View Related
Apr 5, 2010
My computer screen freezes up after a while, then turns into a blank light blue screen and then into a black screen. I have used regcure, PCMedkit, and PC Doc Pro I have also tried some of the online help for a fee but nothing seem to work. Lately when trying to reboot I got a blank red screen. I'm using xp pro and a Nvida GeForce 9400GT GRAPHICS CARD.
View 18 Replies
View Related
May 9, 2007
I have this strange problem:I can't see my Bios loading .The screen is totaly black untill the windows' welcome screen , and then everything is back to normal.
It happened when I updated my motherboard Bios (Gigabyte GA-8N-SLI ,Rev. 1.0) through the original vendor's Website
View 1 Replies
View Related
Oct 23, 2009
The start of my problem is that I was receiving an error 'cannot initialize lsass.exe service'.After repairing XP SP2, the following is displayed every time that I boot:SAFE Mode - black screen with 'safe mode' in bottom corners of screen Windows Mode - blue screen.The mouse is responding.There are no icons.There is no text (except for 'safe mode' as above)CTRL/ALT/DEL does not display task manager.CTRL/ESCAPE does not display anything.Clicking on various parts of thescreen has no effect.I have replaced Explorer.exe from c:i386
View 2 Replies
View Related
Jul 15, 2007
my computer would give me a few problems while booting up. I would start the computer, it would run through BIOS, run through the Windows loading screen, and after that it would run the CHKDSK to make sure my disks are fine. CHKDSK doesn't work, it just freezes right before checking the disks, so I restart and generally it will boot up. Most of the time it would boot up perfectly, but rarely would it go to the xp loading screen and then flicker as if it as going to go to the windows login screen but wouldn't. The screen would just stay black and I'd have to restart.
Next time, generally it would work perfect.So this brings me to the current day. After the windows xp loading screen, it goes black. The computer is on, but I don't see any activity for the HDD via the LED. SO i go into safe mode, i finally get CHKDSK to run, I had to really mess with some stuff to get that working. Windows says the volume is fine, and the only way I can boot my PC is in safe mode, but even that will freeze sometimes while loading some of the files.
View 14 Replies
View Related
Apr 15, 2006
I am able to start in the diagnostic mode. In the safe mode, I disabled all startup programs, but XP still hangs.
View 5 Replies
View Related
Apr 28, 2007
I am running Windows XP media edition on my Toshiba Qosmio Laptop.Currently when I startup I can get only as far as the windows starting screen with the little timer bar flowing but it never goes any farther. All I can do is power off and then start in safe mode.I have tried system restore to several points in the past to no avail. I think the problem may be to do with display drivers as it started shortly after installing Battlefield 2 (a little too advanced for my machine!!) which comes with some nvidia drivers. I have re-installed the drivers that came with the PC and this hasn't worked.
View 14 Replies
View Related
Aug 9, 2010
it all started when I ran Nod32 antivirus. I ran it because I had some viruses on my computer that I wanted to get rid of. After the scan there were 180 some detected objects that were quarantined or deleted. So then I restart my computer and after the windows xp logo there is just a black screen with no cursor. And after awhile the computer will just restart and try booting up again. I tried going into safe mode and safe mode with command prompt but I still get a black screen with no cursor. The last known good configuration doesn't work either. I'm pretty frustrated because I did nothing wrong. I am also having a feeling that nod32 might have quarantined some infected files that are essential for Windows Xp to boot. I also do not have any windows xp disks with me how to fix this?
View 11 Replies
View Related
Oct 29, 2010
whenever i start my dell laptop inspiron 6000 after the dell load a black screen appears with a white loading bar appears which loads for about 10 minutes and then the windows xp proffesional sp2 loads i had recently reinstalled windows from a cd can you please tell me how to get rid of this black loading screen
View 5 Replies
View Related
Feb 11, 2009
Was working fine this morning but this afternoon - Upon startup everything runs fine until after the windows splash screen everything goes black and the only thing visable is a cursor, but nothing to click, cannot ctrl=alt=del, cannot right click. Cannot enter safe mode at all, last good configuration doesn't work either. Computer is still running, fan whirring, lights flashing. Fan has been cleaned and power supply checked, no change. Cannot get into anything to run explorer or virus check. She is running Windows XP SP3. I'm unsure of when sp3 was installed. I understand this may be an issue, along with video and graphics drivers, display settings, corrupt registry, flat CMOS battery or loose internal connections.
View 3 Replies
View Related
Nov 4, 2004
I start up my laptop with the screen closed. When I open the screen I see the XP login screen for a second and then the computer goes black. I can't do anything else.I have Windows XP Home with the service pack 2 (I regret installing it).I never had any problems before. If you know how to fix this let me know.
View 6 Replies
View Related
Feb 21, 2007
when I first start the computer, windows hangs between the black windows logo screen and the first blue screen that says "windows is starting". I have to hit the reset button, it goes to the dos screen with the safe mode, etc. choices. I choose "start using last known good configuration" and I'm good to go. If I turn the computer off during the day and turn it back on, It works fine. It only hangs on the first start of the day.
View 10 Replies
View Related
Oct 15, 2008
when i take a screenshot and paste it to a word document, it comes out black. I do not know where the problem is, word or printscrn? how can i avoid that issue?
View 6 Replies
View Related
Oct 7, 2005
I did a reinstall of windows xp, but now at my "windows is starting up" page it takes forever for windows to load.
View 4 Replies
View Related
May 13, 2007
I have a compaq presario 2500 laptop with windows xp home edition sp1 installed. I had left my computer at the desktop screen to go do something and when I came back avast antivirus had come up with a message saying that one of my files was infected with a trojan. i believe the file was stored in the system or system32 folder. anyways, it had reccomended me to move the file to avast's "virus chest", so I did. and i went ahead and worked on my laptop as normal. then after shutting my computer down and starting it back up later in the day, i found that my laptop would not load any further than the blue "windows is starting up..." screen. i let it sit there for about 30 mins. so then i went to my desktop and started researching my problem on google. i tried going into safe mode, but it still gets stuck at the same screen.
View 5 Replies
View Related
Aug 31, 2006
HP laptop hangs on "Windows is starting up..." screen for ever and a day! Ive tried safe mode but its gets to exactly the same point and than doesnt go any further. I havent tried any other remedies as I thought Id seek some advice since Im not that with-it on these technical issues. I have work on the hard drive that I would really like to be able to recover as otherwise I would have carried out a complete systems reinstall. Is there any way of me being able to do a reinstall and not loose my work? From the things I've tried I can't even return the settings to the way they were when the laptop worked ok.
View 6 Replies
View Related
Sep 26, 2005
I have windows xp home edition service pack 1 with all the updates, i can't install sp2 because my hardware (even with bios update) will not accept it and i had to reinstall windows after not being able to boot from installing sp2...but that is another story. After doing some recent updates my computer now hangs for about a minute before entering windows, it hangs after it reaches the blue screen that says "windows is starting" than finally you see "welcome" and it loads. I'd like to think of myself as a power and advanced user so i did the basics, checked the startup, disabled services, ran norton, used microsoft antispyware did a registry check, used tuneXP to defrag the boot.ini and used bootvis. The comp sure as hell restarts fast but bootvis says that "log on service" takes 168.7 seconds that is just not good.
View 5 Replies
View Related
Jul 3, 2006
The machine does the usual, POST etc, does all its checks and then goes to boot from the HDD(HDD is indicated in BIOS etc). At this very stage (just before the WinXP splash Screen) the Screen (LCD) just goes black and does not ever recover. There is no error messages and the HDD LED blinks a couple more times then does nothing. LCD power light stays on green. I have to either turn it off via power button or do a restart with Ctrl,Alt + Del.
I have disconnected all peripherals except Video Card, HDD and still no luck. The only reason why i left the Video Card was that there is no onboard video and i had no other Video cards to replace it. I cant even boot into safe mode.I manage to resolve the problem by doing a WinXP repair over the top but what i really want to know is, was it a corrupt/damaged MBR that was causing this problem or was it a corrupt driver? I have read a few articles about nVidia cards giving black screens but none seem to be similiar to mine.
View 2 Replies
View Related
Jan 25, 2007
When ever i start up windows it get threw the Windows boot screen then whens it suppose to come to the logon screen i see only black for no matter how long i leave it on!, i can still move the mouse, and thats all that happens i have a operating system cd, and if i got to repair windows what config do i type?
View 2 Replies
View Related
Jun 2, 2008
I changed the screen resolution on my xp machine now all i get after the login screen is a black one.I have tried changing in safe mode but it does not change
View 1 Replies
View Related
