Upgraded 2000 Cannot Install - Multiple Failed

Mar 9, 2008

I recently got windows xp and upgraded from windows 2000. Right now there are 93 updates or so that I can download and have downloaded but can not install. I have no idea why. The newest WGA says my windows is genuine I have 3 different virus protection programs all of which say aside from cookies my computer is clean. Some minor updates work but the critical ones do not. I have tried multiple ideas to fix this and have failed. What happens is I go to the microsoft update site. Click on express or custom install and go to the place where these updates are to be installed :

Security Update for Windows XP (KB873339)
Critical Update for Windows XP (KB886185)
Security Update for Windows XP (KB885836)
Security Update for Windows XP (KB888302)
Security Update for Windows Messenger (KB887472).....

View 8 Replies


ADVERTISEMENT

Install 2000 On Separate HD - NTDETECT Failed Error

Jan 1, 2005

I was going to upgrade my wifes Gateway to w2000 as a surprise, kept getting NTDETECT failed error. Before I could work it out or find a solution, she caught me. Lesson learned, Dont mess with wifes computer when she is not here. replaced ME on her computer and reinstalled all of the backups I had made before I had this brilliant Idea. Problem, I have a $200 system that I am dying to install on something. I have a dual hd each 40g and I have nothing on the Drive D. I have XP home on C: drive. I would like to install this W2000 on the D Drive. can someone tell me Is there a way to reformat Just D: drive and install w2000 on it without messing up C: drive. and then being able to pick which OS I want to boot to? This is by the way a Full system CD.

View 10 Replies View Related

Upgraded - Reformat Or Re Install

Jun 17, 2005

I have a compaq that had many virus and spyware problems and want to reformat or reinstall the hard drive. I installed xp upgrade over ME and am not sure how to approach the problem from here. should i try and do a re install or ust start over.` I had excellent advice to find what my computer was doing from this board

View 8 Replies View Related

BSOD In 2000 After Failed Printer Installation

Dec 15, 2005

Trying to install a Dell laser printer onto someones laptop with Windows 2000. Towards the end of the installation, the computer rebooted due to a bad battery and the AC was accidently unplugged. Now right when I get into Windows before the login screen, the computer just reboots and I can barely see a flash of a STOP BSOD error but don't have any time to read it. I can get into safe mode and do stuff. I tried reinstalling the software and drivers but it gives me an error. I can't uninstall anything because it doesn't see anything installed. What can I do? Its a USB printer BTW.

View 7 Replies View Related

KB890923-2000-XP / Cannot Install On 2000

Jun 3, 2005

Im installing a brand new pc and I just downloaded all the latest fixes and patches for the OS and the Browser.except one, KB890923. Everytime I try to launch through Windows Update it says it cant do it. SO I attempted to download and run it manually and it states that the program is not a valid Win32 application.

View 1 Replies View Related

Monitor Drivers Unable To Install On Fresh Windows 2000 Install

Apr 18, 2005

HI, I just installed windows 2000 professional onto my computer. Everything works fine except that the resolution is really grainy. On some web sites I cannot even make out what the words are. I found out that when I go into my monitor settings in display properties I am unable to install the drivers for my monitor. Does anybody know a way in which I can get around this.

View 1 Replies View Related

Install Multiple Operating Systems From Single USB Drive

Nov 5, 2009

At work, we install a lot of different operating systems on computers, both for use within the school and for staff members' personal computers. In order to make things easier, we want to be able to create a USB pendrive that contains all of the operating systems we want to use and some form of menu to start the installation of each. The problem is, I've not been able to find guides that explain how to do exactly what we want.

View 3 Replies View Related

Install New 2000 Or Xp Better?

Oct 11, 2006

I want install window XP on my Compaq desktop which is running Windows 2000 professional at the moment, what is the best way to do this ?. I don't need to back up anything that is on 2000 as only the previous owners stuff is on it.Do I need to install 2000 and if so what is the best way to do this ?

View 7 Replies View Related

399 Failed Updates - How To Install

Apr 8, 2008

I recently visited Microsoft Windows Updates and was horrified to discover that a total of 394 Windows Updates had failed to install. I clicked on 'Find Solutions' and followed the instructions, which were, click 'Start', click 'Run', type 'services.msc.' then make sure Background Intelligent Transfer Service is on Automatic (not manual) and is 'started'. I did this and tried to re-install the failed updates. This worked, but only for the 5 most recent updates (otherwise there would have been 399 failed updates). How do I go about installing ALL of the failed updates?

View 14 Replies View Related

FAILED UPDATES - How To Get To Install?

Jul 2, 2005

While I was manually checking my updates, I checked on the "Review Your Update History". I discovered that all 6 of the June 14 updates showed "FAILED" I tried checking for updates again, with the same results. Has anyone else experienced this, and how do I get the updates to install?

View 1 Replies View Related

Got Prompted:INF Install Failed

May 12, 2010

I formatted and reinstalled Win XP on Dimension 2400, but this time around 13 minutes to finish, I got prompted:"INF install failed. reason: handler and parameter error"The after 1 hour, I prompted:"13 minutes to finish install" and it froze.I did reinstall few times before but never had this problem, only thing that changed since the last reinstall.is that I chaged ISP to Shaw cable fast internet connection.

View 14 Replies View Related

Failed To Install On C Drive

Mar 8, 2008

I have xp pro installed on the c: I want to install xp home on the I drive but on the setup up screen it says I can only install it on f:/ or d; or e:/ why dont I get all the drives I have formatted to install to instead of 3 partitions allocated?

View 7 Replies View Related

Failed Install On A 98 System

Jul 14, 2005

working on a Comcrap Presario (my favorite as some of you know ), older model, not sure what, doesn't really matter anyway.It has a 2 gig hard drive which is about 99.9% full, shows 80 megs of available ram (yeah, yeah, I know) --- user was trying to figure out how to change the registered owner and somehow came up with the brilliant idea of installing XP Got an error message about not being able to find enough space, imagine that Booted up to the dual boot menu for the XP install and 98, I edited the boot.ini file to get rid of that since the install failed, will there be any other files that can be deleted?

View 14 Replies View Related

IIS.dl_ And IIS.in_ To Install IIS On On Win 2000 Server?

Jul 14, 2007

I need IIS.dl_ ISS.in_ from a windows 2000 CD or windows 2000 server CD, a trial CD will be find. They're in the I386.

View 7 Replies View Related

2000 Pro 2nd Harddrive But Cant Install Anything

Oct 12, 2008

Windows 2000 pro
Small master harddrive was full installed an old harddrive from another computer an 80gig axs a slave. it shows it is drive letter F and can open it I deleted all the files that were on it so it is empty. Itshows in computer managment but how do I get it so I can put folders, files and like put the antivirus on that drive, I think I did something wrong but don't no what it is. It shows in computer management as Drive F and I put it as NTSF like the master drive

View 10 Replies View Related

Install On 2nd HDD - How To Remove Win 2000

Jun 2, 2006

- HDD #1 has just a single partition with win 2000 installed set as master
- HDD #2 has 3 partitions (used for data backup) with no OS on it set as slave

what i'd like to do is put win xp pro on HDD #2, make it the master, put 2 partitions on it, remove windows from HDD #1 (don't want a dual boot)...that being said, how do i go about doing this? do i first switch the IDE cables and jumpers on the drives, reboot (with CD in CD-ROM), install win xp pro on HDD #2 and partition it (i have partition magic to do the partitions, if that matters)? how do i go about removing win 2000 from HDD #1? do i need to adjust the BIOS during this process?

View 8 Replies View Related

Trying To Install 2000 Profile

Apr 12, 2005

I am trying to install Win 2000 pro however once the HD if formated and its installed its needed files to reboot and continue installing the first time it trys to load up after rebooting it errors with the following message on a blue screen:
STOP c0000221 Unknown Hard Erro SystemrootSystem32
tdll.

View 1 Replies View Related

Installshield - Install Games Failed

Jun 22, 2005

i just reconfigured my computer and i tryed to install some of my games and all of them failed, for each one i tired to install it gave me errors for them?

View 8 Replies View Related

Failed Critical Updates - How To Install

Jul 7, 2005

After checking for win updates, I thought I would check the history of other updates. Much to my surprise, there were 6 updates, ALL from June 14, that had "FAILED". Some gave a page to go to for description, some did not. I have tried and tried to get these updates installed, but no success. These were the "critical updates" categories. Is there ANY way I can get the Microsoft to either send me to another address that would install them?

View 1 Replies View Related

All Updates Failed After Manual Install Of IE7

Jul 5, 2008

Shortly after IE7 came out of beta I allowed Windows update to automatically download and install the upgrade....it failed, then I went to MS site and manually downloaded and installed IE7. Success. Ever since then I have been unable to downloaded eight downloads...see below.

Cumulative Security Update for ActiveX Killbits for Windows XP (KB950760)
Security Update for Microsoft .NET Framework, Version 2.0 (KB928365)
Security Update for Windows XP (KB950762)
Update for Windows XP (KB942763)
Security Update for Windows XP (KB951698)
Windows Malicious Software Removal Tool - June 2008 (KB890830)
Cumulative Security Update for Internet Explorer 7 for Windows XP (KB950759)
Security Update for Windows XP (KB951376)

although Service Pack #3 has installed itself....???...not sure how that happen. Its (SP3)listed in Add/Remove...I have searched the web and followed several suggestions...ie, stop windows update service, then delete several folders from Software and Distributions directory...restart windows update service...reboot machine...and still to no avail.........

View 3 Replies View Related

MS Office Updates Install Failed

Nov 12, 2007

All MS updates will download, but will not install both for applications (MS Office) & for Windows XP PRO. After trying to install I get a MS window that lists the updates I tried to install failed. I am now about 83 updates behind ...My guess is some form of windows corruption, but how to fix??? already tried to do a windows repair to no avail...

View 7 Replies View Related

Downloaded - Software Failed To Install

Apr 22, 2008

New problem with winupdate. After clicking "Custom" on the update site, I get the screen that basicly says I must install software for use with the site. I click to start the download and install and the software downloads. After download the screen go's into "Install" mode, then quickly changes to "Some software failed to install". The solution is supposed to be on the update history link, but that does not show the Windows Genuine Advantage software to have been downloaded/installed. Repeating the cycle results in indicating the software for Windows Genuine Advantage has been downloaded and is ready to be installed. Clicking "Download and install" yields the same result of "Some software failed to install".

View 9 Replies View Related

Pro Failed To Install Product Catalog

Aug 11, 2005

I just purchased a Win XP Pro OS from a local PC retail store and I installed it on my machine.Everything went by plan.After everything was done.I restart my computer and in the middle of the boot-up I get this message.Setup failed to install the product catalog (Fatal error). And another try to boot it up I get message Error Signature for WinXP Pro is invalid. The third time I get the first message again.I ran the setup disk again maybe I did something wrong No same thin again.Any cure for that?Any repairs possible? Any download from microsoft to solve the problem?

View 6 Replies View Related

Can Install Windows 2000, 200 Downgrade

Jun 1, 2008

I recently bought an old laptop which originally came with Windows 98. The individual had upgraded the to Windows XP which causes the laptop to run slowly. Can you tell me what is the best (simplest) way to remove XP so I can install Windows 2000

View 4 Replies View Related

Can't Install 2000 Pro - Owner Re-partitioned

Jul 11, 2005

Apparently this is a home built computer, and right now it doesn't even realise it has CD drives. The owner re-partitioned it and now all it has on it is DOS 6.2.
I try to use the 4 disk boot disks but I keep getting errors - file not found or corrupt, etc.

View 14 Replies View Related

Install Win 2000 / Cant Hear Any Sound

Feb 22, 2005

recently i install win 2000 but the problem is i cant hear any sound.in device maneger i can see that sound card is ok.but still it dosent work.i cant play songs.i open the hardware wizard and tyied to install the sound card but computer says that sound card is ok and its working properly.

View 14 Replies View Related

Chipset - Install 2000 Server

Sep 29, 2006

Looking for the correct chipset for my mobo. It is a via tech Model is vt8501 apollo mvp system controller. I am looking to install a win 2000 server.

View 14 Replies View Related

Lost Internet After 2000 SP4 Install

Dec 26, 2004

All went normal, except I now cannot connect to the internet. I did not select the option to archive (not smart).

View 8 Replies View Related

NET Framework 1.1 Service Pack 1 Failed To Install

Nov 29, 2007

I keep trying to install the update Microsoft .NET Framework 1.1 Service Pack 1. It continues to tell me that it has failed to install.

View 4 Replies View Related

Cannot Install / Error: Action Failed For Registry Value

Feb 4, 2006

Hello, I have a computer that I built by myself but I have always had a problem installing programs due to registry problems. A prime example of this is when I tried to install AVG Free antivirus.

Error: Action failed for registry value HKLMSOFTWAREMicrosoftWindowsCurrentVersionRun:AVG7_CC: creating registry value Access is denied.

View 3 Replies View Related

Install 2000 Pro - NTLDR File Is Missing

Jan 17, 2008

Ive been trying to install windows xp pro onto a compaq presario 5000 for the last 2 months but it doesnt want to go. i tried a flat out cd boot,

but i get an error "NTLDR file is missing" (never pressed a key when it said "Press any key to boot from cd"

I tried using the setup disks from microsoft at How to obtain Windows XP Setup boot disks

but right b4 the installation starts i get an error, "Value 0 in the setupsomethingorother file is corrupt or missing"

I tried to install windows xp pro from inside windows 2000 pro, but the stuff freezes the second i click install windows xp from the autorun menu's.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved