Hi!So this is the problem. When I insert a CD or a DVD disk the autorun does not start!The disk is loaded and ready for use but there is no indication by the autorun!?This option is turned on - I checked!So why is it not working?
View 10 RepliesWhen I put a CD/DVD in or plug in my digital camera it no longer runs automatically. The dinging sound that is offiliated with plugging in the camera occurs, but nothing pops up. Where do I go to change this setting so that it will pop up with my options as soon as I plug in the camera or put in a CD or DVD?
View 2 Replies View Relatedeverytime I try to install something from the CD using autorun I get the following error: Couldn't find library MSVCR80.dll. But if I browse to the CD and click on Setup it installs fine. The dll is in the Windows/system32 folder.
View 2 Replies View RelatedThis problem was brought about by just an autorun application for the game, 'The Movies' but seeing as it's a system issue, I thought it'd be better of here. I've tried numerous solutions to the problem and to be honest, I've not got very far - I always seem to be getting an error of some kind and it's preventing the game from installing correctly.
View 7 Replies View Relateda while back, I decided to turn off autorun to make sure that things like Sony CDs didn't take over my system. A while after that, the icons for CDs, my hard drive, and my flash drives wouldn't work anymore. You know, the "special" icons set with autorun.inf and an .ico file. I used these so I could quickly differentiate among drives, but now they're all the standard WinXP icons. This seemed to have happened a while after I turned off autorun, so that doesn't seem to be what it could be... but logically, it'd make sense.
View 13 Replies View RelatedI use a XP SP3.. n in my removable hdd automatically contain an 'autorun.inf'.it emerge after i connect the hdd to my frens pcs.. n whenever i double-click each partition of the hdd, an autorun file is activated. I looked up in my protected system files n found out that there is suspicious autorun.inf file show up as system files in each partition. but i knew there shouldn't be any info files, despite it is a system file. i think it also kind of virus jus it uses the standard autorun.inf for an info file, so that there is no any antivirus can detect it as a VIRUS.it seems that i couldn't delete it even i(as the administrator) cannot get access to change the attributes in virtual DOS command prompt - n i dunno how to get a real MS-DOS n don say to del/ah/f @ del /a:h /f delete it. access is denied.
View 5 Replies View RelatedRunning XP Media Center Edition, Version 2002, SP 2 I created several CD on our old computer running Win 98SE using autorun.inf file to automatically open an *.html page containing an index of the contains of the CD(s). The autorun.inf on those CDs don't work on any of our XP computers. The CDs are recognized easily by these computers running XP but won't open the autorun.inf files.
Nowww do note autorun CDs that come with programs, that we buy, run with no trouble which means the autorun option is definitely on. I have even copied the autorun.inf files from program/purchased CDs and changed the file to open name to the *.html file on the CDs and still they won't work. Again do note these CDs with autorun.inf that I created easily run on all our Win98 computers.
I'm sure I am overlooking something obvious, but numerous recent problems with my system seem to be (hopefully) tied to the same source.I just don't know what it is.I am running windows XP home, service pack one (I have recently reverted back from SP2 thinking it may be the cause of the problems)
1) Any and all telnet type programs refusing to connect to any host (telnet, zmud, gmud, etc) In the case of zmud I can observe that my computer is in no way interfacing with another machine. telnet error is 'unable to contact host machine'
2) Windows media player (version 10) is unable to retrieve album info. Instead I immediately get a standard IE 'page cannot be displayed' screen.
3) Unable to register for many programs such as Gracenote. In the case of gracenote I recieve a 'socket open failed' error message.I am not currently running any firewall.
I only hae a 56k internet connection, so the instantaneous negative connection responses many of my programs display make it fairly obvious that this is a problem with my machine. I hope it is some silly xp setting I need to change.
I cannot change the audio on my computer. It's at mute and I cannot raise the volume.I checked my Device Manager and under Sounds,and video game controllers
Nothing has an exclamation mark.But under 'Other Devices', my PCI Device, SM Bus COntroller and Video Controller all have exclamation marks.What do I do to fix my problem
I have a friend who has a pentium 2 350 which is currently running on Windows 98SE...yikes!My friend has been complaining that their computer has been running slow and that pop ups are appearing everywhere. I told them that it sounds like their computer has been hijacked and that I would recommend that they format their computer and start from fresh.I want to format their computer and install a newer windows OS (perhaps windows xp) and install a couple of spyware/antivirus programs.
View 7 Replies View RelatedOS is Windows XP. The computer is 6 years old & have never had problems. Recently I'm unable to access internet Explorer. The white page appears and the "connecting" message...and there it stays. Also, I'm unable to download .net versions 2.0 through 3.5, which appears to prevent me from downloading other programs. One tech tried to assist me remotely & ultimately suggested
View 2 Replies View RelatedI am unable to enable the hibernate fetaure!Every time I try so, thorugh the Powermanagment Control Panle, Windows returns the following Messag:"Power Policy Manager unable to reserve hibernate. "The Process cannont access the file because it is being used by another process.It is a Windows XP Professional installed on an IBM ThinkPad G40 Notebook.
View 2 Replies View RelatedI have been trying to clear my friends severely infected pc from numerous viruses.I managed to remove many but whilst following certain instructions I may have removed a registry key (or the virus removed it for me) but unfortunately system restore is not enabled.When I attempt to log on the pc immediately logs me off again.I have tried in safe mode and last known that worked but as system restore is off neither proved fruitful.I have used the installed recovery console to try the following -I have read web pages about replacing the wsaupdater file with the userinit file but this did not work.I have attempted to copy files from the repair section of windows but these where not found for some reason.
View 4 Replies View RelatedI use a motorola SB5100 cable modem And computer came with connexant 56K DATA/FAx modem.I have Windows XP, I conect to the internet thru cable modem, Normally I just run a phone line from my computer to my land line and fax ward documents with out any problems. Usually the fax console/moniter pops up to show the progress of my faxes being sent . Not only do my faxws not go out but the console/moniter does not pop up either. When I go to fax console and then outbox my fax attempts are there with red circle with x in it .
Upon opening properties of a outbox fax the extended status reads "fatal Error" , along with JOB ID: 0x0201080a30b2a429, Broadcast ID:0x2001080a30b2a1b8. Not that this means anything but I figure I 'll give as much information as possible.I have tried uninstalling and reinstalling. I have checked to make sure all dependencies are started in services also. I ran diagnosis on modem and copied the log from conexant modems dagnoisis tab. I went to Device manager , right clicked 56k data/fax modem to properties, then went to driver details tab and copied driver files
I ran Spybot S&D and deleted a few items from the Run directory in the registry, and now I can't logon.I'm running WinXP Home, and when the computer starts I get the main menu with the user names. If I click on any name, including the Administrator, I get the 'loading your preferences' message, but then it immediately shows the 'saving your settings' message and the user is logged off. I can't even get on to try to fix the problem.
View 7 Replies View RelatedI don’t know what is happened exactly but I'm always using CMD prompt to do some of my works like run telnet command from any directory But now I should go to system directory where telnet file located then I can run it from there And when I try to run it from another directory I receive the following message
telnet' is not recognized as an internal or external command,operable program or batch file.and this is not just on telnet program I receive the same message for every file I try to run it from another location.
I used to be able to run MSCONFIG and now I can't. I've tried the Start/Run thing several times. I've downloaded an XP version, and copied it to the WindowsSystem folder and tried it from there too, but I can't even get that to run.
View 17 Replies View RelatedI am unable to install SP2.When installing from the web site receive an error message stating failure to install; system is unstable.When installing using the Wizard error message says access denied. I am using XP home edition.
View 4 Replies View RelatedI have loaded the CD and have gone through the instructions just like others have suggested, however, the process will not allow me to delete the partition because it says it, "contains temp files that are required to complete installation". This is not allowing me to remove the partition, so I can reload XP and start from scratch. The partition obligates my whole hard drive, so I am unable to add a new partition. Additionally, I tried to format C: using the repair menu and DOS prompt without success
View 1 Replies View RelatedI'm currently running WinXP Pro (Build 2600) -- upgraded from Win 2000, and am unable to select different compatibility modes for programmes. It used to be that I could set it by right-clicking on the .exe of the programme I wanted to run under a different Win OS (Win 9x, NT etc.) and just click on the 'Compatibility' tab. That tab is no longer there.I also tried running the Compatibility Wizard (Start>All Programs>Accessories), but when that loads the buttons that should say 'Back', 'Next' and 'Exit' have no text on them. If I click the button that should say 'Exit' then the Wizard closes. However, clicking on either of the other two buttons does nothing so I am unable to go through the wizard.It's been several months since this happened, but I never really thought about it until recently because it wasn't until now that I wanted to put an old game on my system; but make no mistake, it's not just the game that won't do it, I can't set the compatibility for any program I have installed, or would want to install. System Restore doesn't go back far enough to try that, so I'm not sure what else to do. Possibly unrelated: At one point, I somehow managed to disable Task Manager; even manually replacing the file for it in the Windows directory didn't bring it back, although it did eventually return seemingly of its own accord. That may have been around the same time that I lost the compatibility ability, but I can't say for certain.
View 5 Replies View Relatedso i just installed windows XP after getting a new hard drive and mother board. It wont let me register it. When i boot up and go to my desktop a few seconds later it say you have 30 days to activate windows. so i click on it and it asks if i want to register windows over the internet, so i click next, then it asks if i want to register with microsoft or something like that so i clink no. then it says "checking for connectivity" and then it says "you were unable to connect to the server" or something like that "Please make sure you are able to connect to the internet". Im able to use fire fox and google crome.
View 12 Replies View RelatedI'm running Win XP Pro and am unable to log on/get to the desktop. When I start the computer the black screen with the white writing comes up, then takes me to the desktop with nothing on it. No icons/tool bar, etc. Then, the welcome screen comes up.I click on my log-on name which then immediately says logging off. It doesn't log off, just sits there. I don't see a safe mode mentioned in the start up screen but I'm sure it must be there. Can anyone help me get to the desk top?
View 9 Replies View RelatedI am unable to log on to my other computer Usually when I turn the computer on, you don't need to log on to a username because there is only one. On the start-up screen, however, it said "Owner" (no password). When I click on it, it says "Loading personal settings" underneath "Owner"... then it pauses. An blank error message comes up (with only the 'Yes' or 'No' option). You cannot exit the error box.Whichever you pick (Yes or no), it continues to log on. It shows the wallpaper background then logs back off before it could load anything else.It returns to the log-on screen. I could click "Owner"... but it would just do the same thing all over again.Also: I've recently formatted my computer about a month ago. Everything was just fine. I've installed ZoneAlarm and something called AVG or something.Has this ever happened before?
View 5 Replies View Relatedi can't log into one site on either explorer or firefox. i'm using windows xp sp 2 ca antivirus. but if i use another computer it works fine
View 4 Replies View RelatedI'm unable to log into my computer (not the one I am using right now). As soon as I type in my password, the computer just freezes and does nothing. I tried going into safe mode but the same thing happens. Is it perhaps a virus? I don't have the windows CD for that computer as it used to belong to my brother who had it for school and it has the school's copy of windows installed. Is there anything I can do or will I just have to buy another copy of windows?
View 1 Replies View RelatedThis is one for the administrators. I have been trying to log in on the desktop but I am constantly being told that my e-mail adress is not recognised my log in name is not rcognised dispite the fact that I have 1,222 posts. I am posting this from my laptop can someone help me reslve this problem.
View 5 Replies View RelatedI wonder if someone can help me with this issue. I am using an HP laptop that operates Windows XP. The problem is that when I log into the system, it shows a message that indicates a corrupted registry files in the user profile, then windows logs into another created user profile as the following: username.computer's name, rather than having the user name only. I still can view my folders and My Documents, but I cannot access my previous user profile. The starting page that Windows loads when I log in is that same page that was when I first purchased the laptop. I also tried to change my password but this didn't work. The problem seems to be in the registry files. Can anyone lead me to the solution?
View 3 Replies View RelatedI'm currently working on a friends laptop thats running Windows XP Pro with SP2. This thing is definitely infected and I'm trying to run hijackthis and other programs to clean it. Anytime I attempt to run a program (exe file), the system runs a spools.exe instead of the actually program I double clicked on. This file then sits in task manager at 100% cpu. I located the file and deleted it but now when I run an exe the system asks me which program to use to run it?!I'm assuming a virus changed something in the registry related to this however I can't even run regedit.
View 2 Replies View Relatedmy wife's computer has a pentium4 operating system. she has a drive c and a drive d. when windows was downloaded, it went into drive d and now we are unable to use computer. would like to crash system and reinstall windows on drive c. nothing that we have tried has worked. she has a recovery disk, but it doesn't work either. what can we do ??? thank you
View 2 Replies View RelatedI had some problems with my system that resulted in me wanting to format and reinstall Windows XP. I booted from the install CD and after the program loaded the drivers at the beginning, the program shut down during "Starting Windows" and I got a blue screen error. Your typical XP error, "Your computer has been shut down before any more harm is caused to it." and something about pci.sys and then a memory location at the bottom of the screen. I tried installing 2 different versions of Windows from 3 different CDs and all froze at the same with the same error. I also attempted to run a diagnostic program from the hard drive manufacturer (Seagate) which freezes whenever I run it (I get to a prompt but I'm unable to type anything). I was able to install Windows onto the hard drive fine when I hooked it into a friends' system but when I put the hard drive back in my system I got "Error loading the operating system." (I assume you need to install Windows on the system that will be using it? It ran fine when hooked into my friend's computer) So, here I am unable to load an OS onto my system and I have no clue as to why. My computer is a Dell Dimension 9100 P4 system.
View 3 Replies View RelatedI have windows XP SP2. When I try to do windows update, it gave a message that says "files required for windows update were not installed or registered." Then it give you the box to click to install it. And after installing it, it still bring up the same message. I tried several times but no luck. Why is this happening?
View 5 Replies View Related