My wife just got an Gateway M320S notebook with WinXP Pro, SP2. It also has a built-in wireless card. From the very first bootup, it took several minutes. First I thought it was the Norton Internet Security 2005 that came pre-installed, but when I disabled all of it's elements in msconfig, it doesn't boot any faster. I have a Linksys WRT54G wireless router in my home, and the notebook has a built-in wireless card. The internal card is set for 802.11.b., and my router is set to "Mixed" (because I have a PDA that
This tweak works also if your Using Zone Alarm or Zone Alarm Pro V.3.7. I found out by applying this tweak for Nortons with my Zone Alarm program. If you are using Norton Internet Security 2002, and are experiencing slow start-up of XP. i.e. you can see the desktop with icons etc. but it takes 30-60sec before you can start using the computer.1. Click on start buttom.2. Select control panel3. Open “Network Connections”4. Under “LAN and High-Speed Internet”, right-click on your “Local Area Connection” and select “Properties”5. Under “General” tab, select “Internet Protocol (TCP/IP)” and select “Properties.6. Select “Use the following IP address:” 7. Under “IP address” enter following : 192.168.0.X (Replace X with a value between 1 and 254. If you have multiple computers, pick differnt numbers for each computer on your network)8.
I have a new computer with only windows, all the neccessary drivers, windows updates and norton/updates installed.It takes about 10 minutes to bootup. It gets to the Windows XP splash screen and it just keeps thinking. Eventually it boots up.I have 3 HDDS. A PATA for the OS and 2 SATAs. Every so often one of the SATAs is not recognised
I just cleaned out a slightly infection of spyware and viruses on this computer and everything looks nice a clean but unfortunately there seems to be some residual problems.My startup is much slower, the 'loading your personal settings' can take upwards of 2 minutes. But, it can by by-passed by hitting ctrl-alt-del. Once I get to the desktop I notice that Norton Anti-Virus is disabled and it stays disabled until the icons load which ALSO takes another 2-3 minutes. I can open programs and they run fine but I am unable select anything on the desktop or right click on it.
I've never had slowdown like this on here before. It also only seems to be happening on this one windows account, the other ones load up much faster. I've cleaned it the best I can running all the normal apps and some other cleaners. Even tried restoring the desktop back to the windows xp default appearance.
I think that I have a virus which is stopping me from 1) Installing Norton Internet Security 2005 properly, and 2) Stopping me from accessing all anti-virus related sites, for example - www.symantec.com, ww.grisoft.com, www.pandasoftware.com, and when i tried to download AVG 6.0 from another site which was unrelated to antivirus, I found that I could access the site but the download failed.
Has anyone tried the new "Norton Internet Security 2007" product with Windows XP Pro?I read a good review on it at the pcmag.com website and I am trying to decide if I want to buy it? I will be using it with my laptop computer which I use with a wireless router with built-in firewall. I am mainly concerned with Viruses, Spyware, Adware, and wireless security.I know that previous version of Norton Internet Security have gotten bad reviews, buy it looks like they got their act together on this one.
I have a nightmare with my notebook which is installed with Norton Internet Security.On booting up the notebook, a triangular icon(inside with an exclamation mark or an X)appeared on the bottom right bar. The icon appeared with a message to warn me of spyware attack. On clicking the icon, it took me to IE for http://www.spylocked.com/?aff=334 or http://www.wayofprotection.com/soft/. I also found my IE is installed with a 'Security Toolbar 7.1'.
In the Control Panel, I found a program 'Internet Explorer Secure Bar' which I wanted to delete. However, once I click the 'change/move' button to delete the program, it required me to reboot before deleting but on reboot, no deletion of the program took place. I want to know how to delete the program.I also want to know how to delete the icon on the right bottom.
I had Windows ME and upgraded to XP via the upgrade disk. All went well and I was asked to uninstall Norton Internet Security before installing again to take "make it work again" in the new environment.I am trying to reinstall but for some reason, the NAV install window keeps telling me there is an existing copy of NAV that I have to remove before I can install again.I've searched through the normal areas but am having no luck. These include the Add/Remove facility, Windows Explorer, and the Search facility.
Having just updated to the Antispam version of NIS my System Restore now refuses to operate properly. I can open it (sometimes) but as soon as I try to do anything with it it hangs. Most other programs are not affected except as I close IE now, I get an error message "The instruction at "1x127cfb80" referenced memory at"0x0215ad58". The memory could not be "read". Click on OK to terminate the program." This may or may not be related.I tried removing NIS 2005 and System Restore came back to normal but having reinstalled - the problem now re-occurs. Symantec website is useless and I cannot find any telephone numbers.Has anyone else had a similar problem?
Have windows xp sp2 & ie7. after microsoft update 5-11-07 i can only use explorer icon on desktop.Have ran norton anti virus, sbybot, updated spy blaster, xsoft found 2 urgent archivosex.net & removed.Installed regcure & fixed those problems but nothing changed.Auto-protect for norton has been disabled & will not enable by clicking on enable.Is puter ready for trash bin found this site by typing windows cannot access specified device, path or file.One cure listed was exefix08 in earth link site but that was not for xp.
WIN XP Pro SP3 (+NortonSecurity2009) Two days ago & ongoing: On BootUp CHKDSK NTSF started running automatically on Blue Screen every time I turn on the computer. "One of your disks needs to be checked for consistency" and proceeds to check C: for 'Files' 'Indexes' and 'Security Descriptors.' (command line 'parameters' are needed for all these) Then Windows boots up normally. When I went to defrag I was not allowed to proceed because of CHKDSK and something about damaged files. Where did this CHKDSK automatic behavior come from & what is it doing? Is my disk corrupted? Will all my files get eaten from the inside out? (BTW-this "DUMMIE" [me] has NO backup) At the Very Same Time - My Norton Anti-Virus became Completely Disabled. An icon appeared on my desktop where I've not had one before - but I cannot access the program from there, from Start-AllPrograms, or even from C:ProgramFiles, open, run. Nothing. The System-Tray Norton icon is gone too! Tried to download a quick, free good antivirus program for right-now protection: AVG and/or Avast - both failed. My behind is hanging in the breeze. (hoping that Windows little Virus Protection & the Firewall will do ok short-term) I've run Malwarebytes, Spy-Bot, & Terminator, but those aren't AntiVirus. HELP! These issues look like maybe 2 separate problems? Maybe not. Has something really bad gotten in? I'm really stuck! Is CHKDSK the priority if there is corruption of the HD, or is AV the priorty? Seems like I can't do either.Should I run Registry Mechanic, assuming all the responses are true and clean-sweep it? Last time I tried, System Restore didn't work,
I keep having to readjust security centre and disable virus auto updates and firewall because of Disabled Security. Registry Data how can I get rid of this pest. I have tried to go into the registry but am unable to find it.
I get random pop-ups (usually w/ mundane messages) from my Norton security & when I "X"-click on em to go away, they do go away.....for like, 2 seconds & pop back up again.howto get em to stop doing that repeatedly?
After installing Norton AntiVirus 2007 I received the following message when I opened the security center in the control panel; The Security Center is currently unavailable because the "Security Center" service has not started or was stopped. Please close this window, restart the computer (or start the "Security Center" service), and then open the Security Center again. I have naturally restarted the computer but that didn't fix the problem. I don't know that the problem is connected to the installation of Norton 2007, (upgraded from 2005), but the Security Center was available before the installation.
I just purchased a new Media Center PC running MCE 2005. Circuit City installed Norton Internet Security program.Currently, it says that Supervisor is logged on/Parental Control is OFF. I am currently the only user, but I would like to setup at least 2 other users. I have setup a Passport, but I have not set a password for my user account. I am confused on whether I need to setup the password in Norton Security or in Windows User Accounts where I setup my passport account? I understand that I can have Norton control user accounts or Windows control user account. Which one am I likely to have the least problems with? If I select Windows to manage the user accounts, do I setup my user accounts with passwords before I run Norton to assign account types to user accounts? There does not seem to be a forum for Norton Internet Security that I can post too?
Since this is a very new PC, I want to make sure I do not do anything wrong. I have read the info on how to setup Norton Security, but I am still confused on where I log on and off (Norton has a log on/off option) and where I setup the accounts first. Since I have not setup what account manager I am going to use I am not sure that Norton is configured properly.
I am working with a Dell 2400 running Windows XP Service Pack 3 with a Pentium 4 2.8 GHz processor and 1.2 gig of ram. It still seems particularly slow. I am not sure if it some of the applications that I am running like Norton 360 or some of my settings.
When I reboot my PC it takes a good 3 minutes to get from the "Welcome" screen to being ready to work with only 4 items on System Tray, volume, Sunbelt Vipre, Zone Alarm Firewall, and Win Patrol. The, "RECGUARD" isn't shown but is there also RECGUARD, Vipre, Win Patrol, and Zone Alarm is all that's present under msconfig Startup. I have ran CCleaner, Defrag, Disc Cleaner, and Registry Mechanic to no avail. Under, "Startup Programs" under, "System Information" there is one heckuva bunch of programs listed if that has any bearing on my problem, I can maybe do a Copy and Paste of the list if needed?
As from a few days ago, the bootup speed of my PC has suddenly slowed to a crawl. it takes about 6 minutes for the bootup now, whereas before it had taken about 2 minutes.
I tried bootvis but it is not working properly and keeps coming up with errors.
Most XP Bootups take at the most 6 or 7 passes - passes being the number of times the progress bar runs on the bootup screen. But mine takes 12 - 16 passes I did have a problem with Gagp30kx.sys before but i have just reinstalled XP and it still takes 12 - 16 passes to bootup.
Gateway Pentium 3, 700 mhz - 256mb ram, 20gb hard drive.Until a few weeks ago my system booted up fine. Now it boots up to my windows desktop and then takes 20 minutes minimum to complete start up. The SVCHOST.exe hogs 99% of the CPU so nothing happens until it has completed its tasks.I have tried starting it without the start up items and this has no effect. I have cleaned it, defragged it, virus checked it, tuned it.
I have a windows xp home edition sp2, with 2 Intel Pentium processors? I've try'd deleting startup programs, and i unleashed dozens of registry cleaners bud that makes no noticeable difference.This happens when i'm booting up;
I am having a problem with my computer whereby I have a screen before my computer begins to boot and this screen used to show for about 3-5 seconds then disappear. In the last couple days this screen has been sitting there for anywhere up to 5 minutes before the PC even reaches the loading XP screen
my pc is taking a lot of time 2 boot up. I have 2 stare at the welcome screen 4 a few secs, then the wallpaper and the taskbar applications come up, but no icons on the desktop. After maybe 20 secs the icons show up but then the wallpaper vanishes, and comes back a few secs later. After all this, the pc connects 2 the network. Why has it gone so slow? I just have avast! antivirus, the xfire firewall, the HP imaging solution center and Free Download Manager in the tray
I recently had to reformat, but ever since I did My computer doesn't go straight from the bios readouts to the Win XP loading screen, but instead shows me the old white loading bars (similar to windows 2000 startup) at the bottom of the screen where it waits for about 4-5mins before taking me to the Win XP boot screen...
the startup is VERY VERY slow. After the Welcome Screen, it shows your desktop and then you gain control and do whatever you want right? Well that's the part my PC lags or slows down a lot. I think the part it lags is when it's loading the icons on my taskbar, like the icons on the bottom right hand screen. I don't have a lot of icons, and they're not resource usage intensive AT ALL. My PC lags during that loading part for about 3 mins or more, and i can't do anything or else it'll make it lag more, i.e i can't open programs or games, i can't even open folders and even if i try to, it takes forever to show up.
The lagging part only shows everytime during startup, but after that it's all good, i can play hardcore games like Crysis etc on maxed setting and do multi-tasks, but i just don't get why it lags so much on startup. In fact, on my crappy Toshiba laptop, it's loads way way WAAAAY faster than my PC, but my PC is way better so i don't understand why. And they both have the same programs and settings, in fact my laptop has way more stuff running on startup and my PC has nothing but games, it's a full on gaming PC only with nothing else, so it shouldn't even lag..............
I ran into a Trojan and finally after many attempts to remove, ended up using Microsoft's malicious software removal tool. (Free) and Norton's 2002 with updates. No slowdowns now while on the Web or local use. However It takes forever to shutdown. I went in and changed the normal shutdown time from 20000 to 5000 that seemed to solve it. The next day it slowed down again. I followed the instructions at Microsoft's website called Startup and shutdown trouble shooter. I went to msconfig and followed instructions. I found that if I disabled tfswctrl.exe, It would shut down fast. I read in a posting that the file is a HP file concerning DVD or Cd operations and isn't essential. PS I did run REG Organizer 1.4 in the automatic reg cleaner mode and it found additional problems that it repaired and some bad folders and links that were bad. That didn't solve the shut down length.
So my question is there a way to solve this dilemma, like an update? or can I just keep it from running without effecting my 2 CD/dvd units. both are HP one is Cd write and DVD read and the other is DVD/CD write both.
