I have upgraded all of our pcs to SP2 (WinXP). Since then only some of the pc's exhibit issue. SVCHOST maxes at 100% for 5-10 minutes on bootup then resumes normalcy. I've narrowed it down to the Internet Connection Firewall causing the issue (if I kill it the prob. goes away). I need to have this enabled. (Besides, why is it only happening on some machines and not others?)
View 6 Replies
Gateway Pentium 3, 700 mhz - 256mb ram, 20gb hard drive.Until a few weeks ago my system booted up fine. Now it boots up to my windows desktop and then takes 20 minutes minimum to complete start up. The SVCHOST.exe hogs 99% of the CPU so nothing happens until it has completed its tasks.I have tried starting it without the start up items and this has no effect. I have cleaned it, defragged it, virus checked it, tuned it.
View 5 Replies View RelatedWhen I boot up into xp, the background screen and a (working) cursor are the only things to be seen; I hibernate, unhibernate, and all then normal things show: icons, start bar, etc. What's up?
View 1 Replies View Relatedall clients woke up and turned on their cpu only to have it hang on the 'black screen' just after the windows splash screen but just before the logon window. None of the <f8> options work. I booted with a genuine xp disk to drop to recovery console and performed various chkdsk /r commands as well as fixboot and fixmbr - no change.There are no errors, no blue screens, nothing to followup on. I even loaded the laptops hard drive into a tower as a secondary primary and scanned for pests viruses and the ilk - for the most part -clean
View 7 Replies View RelatedI've only had this problem for the last month or so... during my bootup in winXP, after the blue welcome screen and its little jingle, the computer sits on by desktop background for over a minute before explorer.exe loads.
View 4 Replies View RelatedI am running Windows XP, and a number of system upgrades were downloaded and being installed during shutdown. Unfortunately, the power got turned off partway through this, and now the computer won't boot up. I tried putting the Windows CD in to run a repair installation, but it still gets stuck.I get the "Press any key to boot from CD" message, but when I press a key there are two lines of text that appear and disappear too quickly for me to read them, and then it goes to a blank screen with flashing cursor, and doesn't do anything else.
View 13 Replies View RelatedI run ScanDisk on a locked drive eg the drive with my op system and it suggests I run it at bootup, the bootup fails (and there is no Scan)- after the initial beep and basic b&w info, the screen just goes blank (no mouse pointer etc) - the red light flashes away on my PC box indicating a lot of hard drive activity though, but I've left it half an hour and it's got nowhere. Exactly the same happens if I instruct my anti-virus program to do a boot-time scan (Avast). My only recourse is to press F8 at bootup and select Start with Last Good Configuration and I can get back into Windows.
View 13 Replies View RelatedWhen booting up XP Pro it displays the name of the previous owner of the laptop. How do I change this to my name at bootup. It didn't work by going to Control Panel and changing user names.
View 14 Replies View RelatedWhen I boot up I have like 19 processes, sometimes 18. I am wondering what other TSG members have on their startup? How many processes, maybe even what are they, or even how many MB do your process take up? I would make a poll but the poll only has 10 options. Maybe I will make a poll after I find out how many I really ought to have. heh. 18..I am thinking that is way more than I need at all!
View 14 Replies View RelatedFor some reason my system keeps hanging when booting up on the windows splash screen, then when i try to start it in safe mode it hang on /System32/Drivers /mup.sys . The problem started when i switched the case of the computer due to the power button beeing fauty. There has been no update of hardware apart from the case.
View 3 Replies View RelatedA friend of mine asked me to look at his computer, after he was noticing a significant slow down in system processes etc. Its a 3 yr old Dell, 1.79gHz with a 30 gig HD and 256 megs of memory, running WinXP Home Edition. He never really knew much about computers, and as I discovered, he hadn't run his virus checker in almost 2 1/2 years, so that was certainly a dead giveaway that he was having problems.I managed to get AdAware and SpySweeper loaded onto it and ran them both, between the 2 programs I was able to wipe out a good majority of the cookies, the spyware and malware, however when I rebooted, the system immediately slowed down as soon as the desktop appeared and then ground to a halt entirely. The mouse moves, but that's it. I'm unable to Ctrl+Alt+Del, in order to shut it down I have to unplug the power cord, since it doesn't have a reset button.
I haven't yet been able to run HiJackThis! on the computer, I'm hoping running it in safe mode might afford me the ability to do that, but since I'm unable to decipher what it says, I'm going to be needing assistance on that level as well.
I am having problems updating Norton Antivirus 2005. Symantec says I need to having Acctmgr running upon Bootup. Using Msconfig, I do not have Acctmgr as an option to check in Startup and viewing Microsoft Services, I see nothing pertaining to Acctmgr I could check. Am using XP Home with SP 2 Installed. ANY SUGGESTIONS AS TO HOW I CAN ACTIVATE ACCTMGR UPON BOOTUP?
View 4 Replies View RelatedWhen I reboot my PC it takes a good 3 minutes to get from the "Welcome" screen to being ready to work with only 4 items on System Tray, volume, Sunbelt Vipre, Zone Alarm Firewall, and Win Patrol. The, "RECGUARD" isn't shown but is there also RECGUARD, Vipre, Win Patrol, and Zone Alarm is all that's present under msconfig Startup. I have ran CCleaner, Defrag, Disc Cleaner, and Registry Mechanic to no avail. Under, "Startup Programs" under, "System Information" there is one heckuva bunch of programs listed if that has any bearing on my problem, I can maybe do a Copy and Paste of the list if needed?
View 14 Replies View RelatedI just finished reinstalling XP Pro SP2 (original recovery from Dell) on an Optiplex 330. Now at bootup it is showing 2 "Windows XP Pro" and is asking which one to run. I followed the directions when I started and I thought I had deleted everything listed. Can I solve this without Zeroing out the HDD and starting over?
View 7 Replies View RelatedInstead of getting the graphical splash screen with the blue dots moving from left to right across the screen before the user login screen presents, I am able to select Linux and boot up properly there. Each OS is on its own hard disk. I had earlier saved off each MBR in case I ever had a problem with it. I have checked the MBR for the WinXP disk (i.e. the 0th (1st) sector) on the disk consisting of 512 bytes. It checked out OK with no binary differences, so I am confident that there is no problem with the WinXP MBR or the partitions in it. Obviously there is a problem after control is transferred from the WinXP MBR to bootup WinXP.My strategy now is going to be to run the bootcfg /rebuild command from the Recovery Console after checking out the boot list from the bootcfg command - if I can get that far with the Recovery Console.I do not seem to be able to get into Safe Mode or the Advanced Options screen selection by pressing on the F8 key. My boot.ini file was edited OK and had an extra line to boot into Safe Mode, but that does not work now.
So, my theory is that if all was working as before OK, I should be getting the selection to boot into Safe Mode vs normal bootup with the changes I made to the boot.ini file. Since I am not getting that and experiencing the problem as described above, I am assuming that something is out-of-kilter with the boot.ini file.Also, my last shutdown in the morning yesterday went Ok. What I was doing before I shutdown for lunch was shredding files - everything went OK with no apparent problems, but I wonder whether something went adrift without being noticed and corrupted some files on my system - notably, the boot.ini file - at least this is what I suspect.Anyone see a problem with what I have in mind to do or have a better idea how to fix this problem?
I tried upgrading my os to vista then decided I wasn't going to but ever since then I have been having problems with windows xp. When I boot up, I am given an option of choosing windows xp, or windows xp setup. I then have 3 situations:
1.If I choose windows xp my computer runs normally.
2.If I choose xp setup nothing happens I get a blank black screen.
3.If I do nothing I get a black screen that has one message, at the top it says windows is missing <windows root>system32hal.dll..How can I set my computer back to its normal state?
I am running windows xp home, sp3 on a Geteway desktop with a pentium 4. A while ago, after doing and un-doing a system restore, I am now getting and error message everytime I boot up. In front of a larget DOS window there is a smaller gray error window that is tiiled '16 bit MS-DOS subsystem'.
View 1 Replies View RelatedStill getting the dos prompt shutdown command box after scanning and removing malware, spyware, trojans and everything else you can think of. Here is what it looks like. C:/windows/system32/cmd.exe
View 1 Replies View RelatedI have no reason to pass protect my home computer. I would like to turn the unit on and go directly to my desktop without going through the password screen. I'm sure there is an easy way to do this but I can't seem to get pass the sign-on page.
View 8 Replies View RelatedAs from a few days ago, the bootup speed of my PC has suddenly slowed to a crawl. it takes about 6 minutes for the bootup now, whereas before it had taken about 2 minutes.
I tried bootvis but it is not working properly and keeps coming up with errors.
Most XP Bootups take at the most 6 or 7 passes - passes being the number of times the progress bar runs on the bootup screen. But mine takes 12 - 16 passes I did have a problem with Gagp30kx.sys before but i have just reinstalled XP and it still takes 12 - 16 passes to bootup.
View 4 Replies View RelatedI have a PowerSpec Desktop PC. About a week ago, it locked up while I was surfing the web and when I rebooted, the bootup took about 15 minutes. the BIOS seems to be running (the "PowerSpec" logo appears on the monitor) but it remains like that for 10-15 minutes before it FINALLY goes into Windows. I'm thinking a virus? Maybe the BIOS is corrupt? It's been suggested that perhaps one of the memory sticks is bad. Another suggestion was that the hard drive (Seagate 250GB, IDE) may have a sector going bad. I bought a new drive (Maxtor 500GB) and one of the techs here at work cloned the Seagate drive but that didn't solve the problem
View 4 Replies View RelatedIs there a way to increase the bootup time on my PC? It's fairly new, too
View 14 Replies View RelatedI want to run the Dell Diagnostics from my ResourceCD that came with my computer. I suspect a problem with my video card and I am trying to check it out. I've been trying the following steps but it doesn't work.
This is exactly what it says in my Dell Handbook:
1. Insert the resource CD.
2. Shut down and restart the computer. When the Dell logo appears, press F12 immediately.
3. When the boot device list appears, highlight IDE CD-ROM Device and press Enter. This is as far as I can get. When I select the CD-ROM to boot from, nothing happens and Windows loads normally.
4. Select the IDE CD-ROM Device option from the CD boot menu...........
My computer wont boot up it has an error message "stop: 0x0000007E (0xc0000005, 0x82322BCB, 0xF899669c, 0xF8996398) will not do anything after this message appears. My OS is Windows xp.
View 2 Replies View RelatedI can't thank you guys enough, you have helped me a bunch. anyways i went to a website and all of a sudden my computer turned off and i tried to turn it on and it works until 5secs in it would go to a blue screen telling me ways of fixing and to use f8.
View 14 Replies View RelatedHi, I have been avoiding shuting down my computer because when I reboot I can't always get back to my Desktop. All I get is a black screen asking me if I want to try some differnet ways to boot up, After trying all the different choices the only way that works is "Last Known Good Configuration ( your most recent settings that worked)" Then finally after that I get the desktop with this error saying RUNDLL error loading C:PROGRA~1MYWEBS~1ar1binF3SCRCTR.DLL. What ever that means? Then it says The specified module could not be found ok.
View 4 Replies View RelatedAll of a sudden the other day my OS (Win XP Pro, SP II) froze shortly after bootup. I was able get on Firefox but the mouse froze on the XP screen when running any HD application. Ctrl-Alt-Delete didn't free up the mouse, and doing it twice got no response.Earlier, I couldn't find any conflicts on the Device Manager.I changed my mouse connection from USB to Serial, but that made no difference...This AM, Windows booted up OK, but the screen froze right after a few tray & desktop icons had loaded. Ctrl-Alt-Delete still didn't function for a shutdown...Strangely, the Num-Lock light and the mouse underside red beam stayed on after shutdown.
View 14 Replies View RelatedHey, basicly my old Hard drive for some reason or another died. I got a second hand one off a friend which I beleive and he beleives to be allright. = Baracuda 7200 .6 160gb HDD IDE... Obviously when starting it gets stuck on Error loading OS.. So I restarted went into boot menu and placed CDDrive as no1 boot. Placed my XP disk in... it went through the stages: Press any key to boot.Setup is inspecting your computers hardware configuration now on the blue screen of "Press f6 if you need to install a third party SCSI or RAID driver that passes by what should appear next is sposed to be a screen saying "press enter to install windows xp or R to repair," but that doesn't load up instead I am stuck with.
View 4 Replies View RelatedI was recently issued a new laptop at work and after a few pushed updates from our IT department, I discovered that everytime I boot I now get a strange screen just after the Windows logo but before the login prompt. The OS continues loading about 5 seconds after this message is displayed. I've contacted our IT department but they don't seem to know either.I have a strange feeling it was caused by a failed update. Judging by the spelling mistake in the message and the timing of the error, my guess is that it originates from a 3rd party driver/software. It is interesting to note that when booting up in safe-mode the error screen does not present itself. This further makes me suspect a driver of some sort. There are also no related errors in the Application or System Event Logs.
View 3 Replies View RelatedMy pc starts to load windows xp then i get a black screen and nothing happens,i got over this last night by hitting f8 and using debug mode but tonight nothing works.
View 5 Replies View Related
