Everything installed fine except Win XP Pro starts to install, i insert the RAID driver disk it continues to install, then it gets to the loading/installing windows bar and stays there
View 5 Replies
I want to install Windows XP Pro 64 Bit on my Hp dv9907ca, which came with Vista Home Premium 32 Bit. I upgraded my RAM to four gigs, and get better gaming on XP and I'd like to upgrade my 32 bit to 64, problem is, the installation hangs as soon as it gets to 'Setup is loading Windows' still int he text based installation. I believe I read somehwere it's because of some sort of hard drive connection that's in newer computers, and XP doesn't have drivers for it. So basically, I'm wondering if soeone can figure out what's wrong, and tell me exactly what I need to do in order to get XP to work, now this is a laptop so I can't change any parts in it or anything like that.
View 10 Replies View RelatedI was surfing on the web and my computer froze on me (Everything froze besides my mouse). So when I restarted my computer, everything was fine until I got to the loading screen (screen with the windows logo and the loading blue bar). I've waited for the longest time ever but the blue bar would keep moving while windows doesnt even bother to load up.I've tried running Windows in safe mode but its still stuck at the loading screen.
View 1 Replies View Relatedits a FX7026. I had to replace the motherboard and am trying to install XP on it, but after loading all the install drivers it blue screens. I have installed a trial vista on it to make sure it isn't just a problem with the computer and it installs fine, but when I try XP it keeps popping a blue screen.
View 5 Replies View Related Well i am trying to install a fresh copy of XP and the CD is bootable and the CD drives all work ok, i have tried 3 different CD Drives but when i goto start the boot sequence i get an message saying:
Searching boot device
No emulation
Press any key to boot from CDrom....
I press a key and the cd drive starts off but the screen stays black and does not do anything.
I have never seen the message No Emulation under searching boot device before
I've recently purchased an HP G50 laptop, and decided to wipe off Vista and install XP - I did this with a few laptops before, no problem. However this laptop is proving to be a real headache. It won't boot from the Windows XP install CD at all The furthest I get is at the "Press any key to boot from CD" prompt, then the screen stays black. I booted without the hard drive to see if this was causing the issue, but the problem persisted. The CD had no problem booting on 4 other machines. I tried a different CD and that didn't make the problem go away. The laptop will boot any Linux install/live cd I shoot at it, yet it refuses to boot the Windows XP install CD.
View 8 Replies View RelatedI have a rig with some form of linux i put on there months ago and now i want to install xp home sp 2 on it. i have done many xp home installs and im using the disk from my good rig the one whos specs i have listed because i just put vista on this one. now whenever i put in the xp home disk it starts like normal by saying press any key to boot from cd.... i hit enter and then the black backround stays but no text ever appears. after about 10 min the drive stops spinning.
View 4 Replies View RelatedI install Server 2003 Standard SP1 downloaded and installed on a PII 400, 256Mb RAM with IIS, ASP.Net 2.0, SQL server 2000 SP4, Mysql 5, and PHP5, and all without a single hitch...too good to be true. I went ahead and tried on what will be my server PIII600, 512 MB RAM, First try, Server 2003 couldn't find a file when installing, retried and it worked. Downloaded SP1 and when I was extracting it said "file is corrupt", downloaded 4 more times with same result. reformatted and reinstalled 5 more times and cannot get past "file is corrupt" on SP1 and sometimes extracting the .Net 2.0 installer got the same error. I swap all hardware with PC from first try (except RAM, Mobo, CPU, CDROM) with no change. Win98 and XP installed fine on the second PC just can't get server 2003
View 3 Replies View RelatedWhen I try to install windows xp pro it gets to the part when it says Loading Keyboard Layout Library KBDUS.DLL... and it just stays there. One of my friends told me that it can take a little longer on some computers so I let it stay on all night long it was still on the same thing when I got up. I've tried every thing that I know. Everything seems to be working right also I was wondering I've got a new CPU coming that I'm going to install would I need to reinstall windows if I get it to install on this CPU?
View 14 Replies View RelatedI currently have windows xp on my laptop, however when I turn it on , it opens to my desktop, but nothing works, All the programs are appearing as links, and when u click on them nothing happens,I tried opening a word file and it said windows installer could not be found.I tried doing a system restore but as mentioned it looked just like a link and when I clicked it nothing happened.No programs are loading at system start up, these include, my antivirus, network connections etc.
View 6 Replies View RelatedI currently have windows xp home. I want to install windows xp home. how do i install it so i can keep my files from xp home. cause when i install xp pro i dont wana loose personal files or data.
View 1 Replies View Relatedso when i start my computer everything goes fine until, the windows xp screen comes up when it loads then the bar freezes and a blue screen pops up saying."check for any viruses. remove any newly installed hard drives or hard drive controllers check your hardrive to make sure it is properly configured and terminated. it also says to check for hardrive corruption.the strange thing is, is that i can run bart pe tools and access my hardrive but i cant start my computer regular idk.
View 1 Replies View RelatedI have a problem...... My desktop pc running widows xp pro sp2 stoped loading recently. It would get to the loading screen with the blue bar and then hangs. i had been having a little trouble with the system recently and thought it was the hd. I have a new hd waiting for another machine so thought to install on that for the meantime. Unfortuantly xp will not install on this machine even with a different hd (loads all drivers, but stalls on the "setup is starting windows" portion), which makes me think it is a hardware problem. I have 2 sticks of corsair 512mb and have tried to boot and install with all possible combinations of 1 or 2 sticks but always the same. Before i go and spend money on replacing various bits of my system till I nail it, i was hoping someone on here could point me in the right direction. Seems to point to a ram problem but would both sticks go at the same time? If not would the MB be the prob, but everything else seems to woking fine......
View 6 Replies View RelatedI am getting the following Rundll notification on WinXP SP2.
Error loading C:windows
patchw32.dll
The specified module could not be found
I have checked on the C:windows|npatchw32.dll file and it appears to be spyware that has been removed but I need help in removing the run dll notification
I have successfully created a USB installation routine for Windows XP using Multiboot.cmd. The problem i am having is that the installation works perfectly on evry machine i have tried it on apart from Dell machines.
It gets as far as Setup is Starting Windows (after loading in all the background drivers) and then Blue Screens with error 0x0000007b. I have scoured the internet and found nothing of any use on this error code.
It does state that when installing from USB to ensure that no other USB devices are plugged in but the mouse and keyboard themselves are USB devices.
I have a new computer with a 120g hard drive and a 20g hard drive as a slave. I also have 1 gig of memory.In setting up partitions for my computer, is it ok to have just one partition or should I make several?I do nothing fancy on this computer as far as gaming or any type of designing. All I am interested in is just an easy way to setup and maintain my system.
View 9 Replies View RelatedOS Windows XP.System was working fine but a problem has developed.When i turn my pc on get the beep and windows loading but then screen goes blank. red light stops flashing and even the lights on modem go out. Stays blank for 3/4 mins and then boots up as normal.When i get into my system i get a prompt to run chk dsk as i have a corrupt file but the file is different each time.
View 8 Replies View RelatedI made a computer from my brother, with parts from other computers. But windows won't install. When I put the CD in the drive, I will start the computer using the CD. It check my Hardware configuration and asks me to install a non-windows SCSI/RAID driver, I will not install this driver and I'm continueing as normal. This is when it goes wrong: when loading 'Windows Executive' (The first file it loads) the computer gets stuck.
View 3 Replies View Relatedif i do a clean install of windows xp to replace windows vista, will it create a windows.old folder that has all the stuff i had from before the clean install?
View 1 Replies View Relatedi boot up useing xp pro cd and it stops loading at pci ide bus driver, then shows the file intelide.sys is corrupted , says setup failed, have no idea can it be replace with a good one and how would i do it. it alredy has win xp pro but is unusable, shows no modem even in control pannel, when i open modems nothing happens.
View 1 Replies View RelatedI have run into a snag. After installing Trendmicro I started having problems. After the install it took forever to load, and when it did I get a warning that I have no virus protection. I removed Trend with it's own removal tool and installed AVG Free, I get the same thing, The resident shield and email won't start. I install Vipre and the same thing protection is turned off and won't turn on. I have cleaned the registry of all norton traces, avg and others. I have did a scan with viper while it was installed and found a few items that I cleaned. I'm at my wits end and have never seen this happen before.
View 5 Replies View Relatedmy names Neil and I'm from Washington state, Ive had problems trying to install xp pro on my computer. Let's see so far ive tried everything from different hard drives to taking out all hardware not needed. I've even went online and downloaded killdisk to reformat my drives so that they are completely reformatted. Let's see...every time I try to install xp pro this is what i do. First I go into the bios and redirect the the cd to main boot then my hard drive then my floppy, in that order. I reboot my computer with the xp disc in the drive. Following that I create a new partition and begin the install, it installs all of the files it needs to run xp setup, then it comes to the screen that says it has to reboot, it does and then it comes to "hit any button to boot from cd" I dont hit anything. It continues to the next screen, the loading xp screen, and it always stops loading there and freezes. If someone can help that would be great! Itz driving me crazy, and I really really want to fix this pc myself, instead of bringing it to a comp shop.
View 12 Replies View Relatedas above, pentium 4 windoiws xp black screen on startup cannot see bios menu or get to safe mode.
View 3 Replies View RelatedWhen doing an XP windows re-install. I am getting the error "Error loading operating system" I was formating the drive with XP and it stopped. Now when rebooting to go to CD for install I get the Error.
View 14 Replies View RelatedHI, I just installed windows 2000 professional onto my computer. Everything works fine except that the resolution is really grainy. On some web sites I cannot even make out what the words are. I found out that when I go into my monitor settings in display properties I am unable to install the drivers for my monitor. Does anybody know a way in which I can get around this.
View 1 Replies View RelatedAbout a week ago I reformatted my computer. Everything worked wonderfully and my computer ran great. Then 3 days ago at the end of the night I went to shut it down and it said "install updates and shut down." So, I told it to install and shut down. The next day when I went to turn it on, for the first time since that shutdown, it froze on the XP loading screen. I manually turned it off, then tried again and selected to start windows normally. It came up fine, and ran just great since then, with a couple of different shutdown and restarts in between. Last night, it again said "install updates and shut down." I clicked for it to install and shut down. Now this morning I can't get past the XP loading screen. I have tried 4 different times. I don't know what to try. I also, don't know if the "install and shut down" is part of the problem or just a coincidence.
View 9 Replies View RelatedLet me quickly start by noting that I have familiarized and comprehensively searched every forum for assistance on this issue, and have attempted multiple fixes for the following problem. That said, if anyone absolutely knows what my problem is, and if is addressed elsewhere, please direct me. If not, thank you VERY MUCH in advance for your help!History: 30 GB HD filled up on Fiance's Inspiron 1100. I purchased a compatible 60 GB HD, enclosure, and then I cloned the original HD to the larger one.Then, after restarting the computer with the original drive still in the case, the computer failed to boot. So, after attempting to fix the original boot issue, I physically installed the new, 60 GB HD with the cloned drive on it. The computer fired right up. I was elated. Then I ran defrag. Not a good Idea.Defrag crashed at about 40% complete. I attempted to reboot the computer, to no avail. The computer seems to boot fine, but then gets stuck permanently at the Windows XP loading screen. The loading bar moves, the mouse moves, yada yada. Nothing else. I CAN boot in safe mode, and access all my files (which i DID backup first). However, I want the damn thing to work, considering I just bought the new HD and the computer otherwise worked just fine.I ran CHKDSK from the recovery console, which found errors, but did no good. Then I ran CHKDSK /r, which took about 24 hours to complete. Errors found, some "unrecoverable," to no avail.I cannot access my system startup BIOS w/F2 (or any other key) during startup, no matter how early i start to tap the key. That is strange to me. Thus, I cannot boot from the XP CD.What do you all think my options are? The HD is physically OK, I think. The fact that safemode seems to function pretty flawlessly is a good sign, right?
I have read to use bartPE to correct the registry. I have read to reinstall (?) the BIOS. I am ready to re-format the HD and re-install XP, but I'm not sure how to do this, or if I can do this via DOS or the recovery console, as again, I cannot access the system startup settings to change the boot sequence.Again, at this point, is there a way to fix this? If not, can I sweep off the HD and re-install XP? How might I do that?
My system is running with Windows 2000.
Now, I just want to install Windows 98 on a separate logic drive, but it is immpossible to run the setup programm under windows 2000. How can i install windows 98 just the same.
I have two computers, one I use for gaming, the other for school. Both computers had 60gb Maxtor (school with lots of room, gaming with about 10 gb free). My school HD took a powder (the evil clicky noise of doom), but I was able to back up my files prior to that. Me being a quick thinker, I decide to upgrade my gamer puter to a 120gb (don't wanna go too nutso, as I am considering building a much superior computer), and put the good 60 gb in my old Athlon 700. Problem? I cannot get Windows XP Home to complete install on my gamer computer. (Athlon 700 installed just fine with 'good' 60gb).Gamer Computer: Athlon 1800+, 512MB DDR Ram 2100, KR7A Raid MOBO, GeForce3 Ti 200 (128MB DDR RAM), SB Audigy 2(AGP).
It is a RAID mobo, but i do not use the raid functionality, I did not have a problem before(I have my HD and my 2 roms on ide now). I go through the install steps, and I get to the very very end, where it states you are about to start Windows XP, and then it hangs, and thats it.I have tried to ensure there are no conflicts, I pulled out my sound card as well as my network card, and 're-seated' my video card and RAM. I have tried looking at using a winxp bootup floppy, booted into safe mode (the only error it detects is the missing RAID, no conflicts detected there). Heck, I even swapped out mouse and keyboard. I tried putting back the good 60gb back in the pc, and reformatting, but still get the same thing(sometimes the screen is black, sometimes the icky blue of xp, but that's it).I have no idea now. I did make sure that my bios was up to date before taking down the system originally, and it was, so no change was made there. Even swapped out the ribbon cables to ensure nothing was damaged on original removal.
Let me quickly start by noting that I have familiarized and comprehensively searched every forum for assistance on this issue, and have attempted multiple fixes for the following problem. That said, if anyone absolutely knows what my problem is, and if is addressed elsewhere, please direct me. If not, thank you VERY MUCH in advance for your help!History: 30 GB HD filled up on Fiance's Inspiron 1100. I purchased a compatible 60 GB HD, enclosure, and then I cloned the original HD to the larger one.Then, after restarting the computer with the original drive still in the case, the computer failed to boot. So, after attempting to fix the original boot issue, I physically installed the new, 60 GB HD with the cloned drive on it. The computer fired right up. I was elated. Then I ran defrag. Not a good Idea.Defrag crashed at about 40% complete. I attempted to reboot the computer, to no avail. The computer seems to boot fine, but then gets stuck permanently at the Windows XP loading screen. The loading bar moves, the mouse moves.I can boot in safe mode, and access all my files (which i DID backup first). However, I want the damn thing to work, considering I just bought the new HD and the computer otherwise worked just fine.I ran CHKDSK from the recovery console, which found errors, but did no good. Then I ran CHKDSK /r, which took about 24 hours to complete. Errors found, some "unrecoverable," to no avail.I CANNOT access my system startup BIOS w/F2 (or any other key) during startup, no matter how early i start to tap the key. That is strange to me. Thus, I cannot boot from the XP CD.What do you all think my options are? The HD is physically OK, I think. The fact that safemode seems to function pretty flawlessly is a good sign, right?I have read to use bartPE to correct the registry. I have read to reinstall (?) the BIOS. I am ready to re-format the HD and re-install XP, but I'm not sure how to do this, or if I can do this via DOS or the recovery console, as again, I cannot access the system startup settings to change the boot sequence.Again, at this point, is there a way to fix this? If not, can I sweep off the HD and re-install XP? How might I do that?
View 6 Replies View RelatedI installed windows xp on a new hard drive.Now when I turn the computer on I get an error.A DISK READ ERROR OCCURED press CLT+ALT+DEL to restart when i press CLT+ALT+DEL the computer will restart but I keep getting the same error and windows won't start.
View 9 Replies View Related
