Reinstalled Doesnt Work - Blue Screen Error Message
Nov 14, 2007
Couple weeks ago my friends computer got blue screen error message and we called Dell and they sent us a DVD:
Operating System - Reinstallation DVD Microsoft Windows XP Media Center Version 2005 with Update Rollup 2.
With one of user help i was able to reinstall Windows from DVD. I can not connect to internet through cable.
or I can not turn the wireless adapter on ( F2 button) Or when i try to play sample music with Media Player it gives an error message - Windows Media Player cannot play the file because there is a problem with your sound device. There might not be a sound device installed on your computer, it might be in use by another program, or it might not be functioning properly.
I just did a fresh install of XP on my new PC and now, for some reason there is no sound coming out of the speakers. It worked before I did the reinstall. The digital sound is built into the Gigabyte mobo and I made sure I reloaded the drivers. Everything looks okay in the Device Manager. I've looked at everything I can think of, but I can't get the sound to work. When I plug in my USB headphones, they work fine. I keep thinking it's something simple I'm missing.
After a marathon problem with Windows not booting, I did a clean install on another hard drive. Now, one of my PCMIA ports (on the side of my IBM A31 Type 2652 laptop) doesn't work. Both were working fine prior to my boot problems and subsequent reinstall. One port still works, but I need to be able to use both for 1. a wireless card and 2. a USB 1.1 to 2.0 conversion card that I use when I print, etc. I've done Windows troubleshooting for drivers, etc., but Windows (as usual) found no problem.
We have Levine/Young The Complete Reference-Windows XP. Reading through before I did the clean install, I noticed a mention that sometimes this happens when XP is reinstalled, but there is no solution to the problem mentioned. I'm at a loss to getting both ports to work. I need a solution before the weekend is over.
A few weeks ago, I received a blue screen of death that would not get off my computer. I had the Windows Antivirus Pro Virus that would not go away. I am going to school tomororw and needed this off my computer. So I decided to wipe the hard drive clean with the Dell CDs that came with this purchase. I downloaded Windows XP and some of the drivers. Some of the drivers that i tried to download say they downloaded but then do not come up. Broadcom440x10/100 is saying the network cable is unplugged, I have no idea what that means and internet will not work. What can I do manually to make this work?
Man, my computer for the last two weeks have been crashing like an emo. I mean, when I play GTA: San Adreas, in 20 minutes, I get a BSOD with a stop error. When I put hardware acceleration to full, in a half an hour, I get a BSOD with a similar error. Believe me, I got three kinds of errors, and some were from different time. I believe the problem either came from the either the PSU, new 512 mb of ram, old 512, CPU, system board, or the graphic card. I'll try to post the error as best as I can. So, is there a solution to this? Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078) This is one of them, but there another one with KMODE that I can't seem to remember. Also, sometimes, after it tries to recover from a serious error, the computer shuts down during the bootup before I can choose which XP version I can choose. Also, I hate to say this, but I'm not using a legit windows copy sp1, but I have updated to sp2.
i had XP 2008 virus/spyware, which I think I managed to get rid of with Malwarebytes' Anti Malware and System Mechanic 7. Now I have a new problem. After receiving a recent download from microsoft, upon restarting, I get the blue screen of death with this message; STOP: C000021a (Fatal System Error) The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000)
I can't get anywhere into Windows, I've done F2, F8, F12, everything I could think of without risking more damage. I've booted from the system mechanic CD with the Hard Drive recovery, and while it said it found and fixed a problem, it didn't fix this one.
The start of my problem is that I was receiving an error 'cannot initialize lsass.exe service'.After repairing XP SP2, the following is displayed every time that I boot:SAFE Mode - black screen with 'safe mode' in bottom corners of screen Windows Mode - blue screen.The mouse is responding.There are no icons.There is no text (except for 'safe mode' as above)CTRL/ALT/DEL does not display task manager.CTRL/ESCAPE does not display anything.Clicking on various parts of thescreen has no effect.I have replaced Explorer.exe from c:i386
About 2 or 3 minutes after booting the computer, a blue error screen appears. It says something about dumping physical memory and to restart the computer. After restarting, it seems to work fine. What the flip?
after installing Nero my laptop shows blue screen with some error message .i tried to reinstall new operating system it shows now power on the hard disk.
After buying and installing the new hardware i'm now having some issues. Everything was fine for weeks but now sometimes i get an error message. This is the 2nd time this has happened. Everything starts up as per normal but once it comes to the Windows screens (desktop) i get a blue screen with the error message: So i pretty much need to restart the pc and it goes back to normal. All hardware and software has been checked time and time again. All seems to be ok. Bar the dvd drive. The dvd drive doesn't let me access it, however if i put a dvd, audio or data cd in then autoplay takes over and asks if i want to play it or whatever. But if i want to open it by double clicking or selecting open after right-clicking then it doesn't allow it. I get the error message: d: not accssible. Incorrect function.
Im am getting STOP - c0000218 Registry file falure the registry cannon load the hive. systemroot/system32/config/security or its log or alternative. It is corrupt, absent , or not writeable. but whatever I do it I end up with the blue page with the eror message on it. I went into the bios setings and made sure that it could be bootable with cd but all in vain.
I run Windows XP and keep finding that when I leave my PC unattended for more than 10 minutes I get a blue screen with a scary message regarding the dumping of physical memory. The error codes in the message are as follows:
stop 0X0000008E, 0XBA40721F, 0XEBC267C, 0X00000000, videoprt.sys - address BA40721F base at BA401000 Date Stamp41107d08
I returned to my computer earlier today and noticed it was a bit sluggish and out of the ordinary. I restart it thinking this will fix the problems, only to find out that its having problems booting up Windows XP. It gets to the window boot up screen and would get a quick flash of a Windows error message(blue screen with yellow text) and would restart and continue this process with no end. I attempted to boot-up from Safe-mode and last windows configuration, yet the problem continued. I decided to bite the bullet and reformat. Here entails my actual problem, I delete the partition and attempted to reformat. Well it begins as it normally would, however it freezes everytime at 1%. I have tried another HDD sadly, I don't think that one has ever worked. It gets power fine, mobo is working correctly. Yet, it could be several things I could've fried my HDD, CPU, RAM any number of things. Yet it dosent seem very possible as I have heat sinks on the RAM and decent cooling in my computer.
I just build a new comp a couple of weeks ago and i been getting a BSOD occasionally, so far it only happens when playing C&C 3. The error message is Driver IRQL Not less or equal in wind502u.sys. Error code 100000d1 under event viewer.I use a crappy motorolla wireless USB adapter which does give me problems sometimes. Basically, when I start my computer i can go online for 1 minute, then it disconnects. inorder to reconnect i have to unplug and replug in the adapter, then it starts to try to connect to the network.
2 SATA Raid hard drives with striping.I'm having problems installing Windows XP Pro on my machine. When we first started to install the OS on the machine, I kept getting a blue screen error message before it boots into setup saying ERROR 0X0000007B. And then after that it started showing up book disk failure. Instead of SATA we tried just one EIDE HD, we switched memory, new cables, new powersupply, we switched the vcard. And just recently we finally switched the Motherboard. Now when we boot off disc we get an error message saying "boot disk failure". So we ran a boot setup windows xp floppy. It gets all the way to where it asks for "please insert windows xp installation cd" and when I do it doesnt recognize it but I hear the CD spinning. We've switched out the CD-roms with 2 different ones and still can't get any progress.
My PC is running absolutely stable (7 hours of orthos). Just bought this EVGA motherboard and swapped it in place of an Asrock motherboard and got everything running, overclocked and stable.Before I got Windows XP running (previous installation from the asrock mobo), I encountered an issue and i isolated it down to one of the 200gb 7200.7 SATA HD's.IF this HD is plugged in when the PC boots, then the Windows XP Boot screen appears and hangs. NOTE: it DOES NOT freeze - the bar still moves, but there is no HD activity and the pc stays like this for hours on end. Note again - this is not a hang. the activity bar still moves from left to right, and it keeps doing this indefinitely it seems (with no HD activity from any drives). IF this HD is not plugged in, the PC boots in straight away. All drivers are tip top (nforce drivers, SATA drivers). However if I hot-plug this drive from within Windows, it works fine!. The PC just doesn't boot with the HD plugged in.
My computer randomly receives this error, and this link here http://support.microsoft.com/default...b;en-us;827663 is what I think I have been receiving. It said this problem should be resolved by updating to SP2. Well I have SP2 and I still am receiving this problem. Could there be any other possible problem that could be interferring here.
i have an mdg computer that came with vista, i used it for a while but realized i liked xp bettet so i decided to install it (i got a possibly pirated version from my friend) while look at intel.com for drivers i found out i had to find my system model. The mdg user guide said go to Start->Run and then to type msinfo32. i did that but than an error message popped up and said:cannot find msinfo32 and blah blah search. i went to search typed in msinfo32 opened the one that was in folder system32. than another error message: C:WindowsSystem32msinfo32.exe is not a valid Win32 application.
My computer was recently infected with adware, spyware & some viruses. I have downloaded and run Ad-Aware, Symantec Antivirus, Spybot, Registry Mechanic & HijackThis. When I try to run Regedit, I get an error message telling me:regedit is not a valid Win32 application
Thanks for your help.
Here is my HijackThis Log:
Logfile of HijackThis v1.99.1 Scan saved at 8:43:30 PM, on 4/4/2006 Platform: Windows XP (WinNT 5.01.2600) MSIE: Internet Explorer v6.00 (6.00.2600.0000)
My Dell XPS Gen 3 from 2004 underwent a serious issue when I installed Kaspersky Internet Security resulting in BSoD when I booted computer. Long story short, I had to buy a replacement HDD as the original drive fell and now only plays music (Took it out to extract important files, all save, but when troubleshooting it back on PC with the recovery console it fell).
On my PC I had two extra HDDs, one at 170gigs for music/pics and some apps and a 500 gig for media and some apps. I unattached both those HDDs when I did a fresh install of XP Home Edition on my Dell XPS. After that install seeing everything loads and works as expected I powered down PC and attached my other two drives to get an Error Loading OS.
I'm getting a blue screen message on a 250 GB Seagate that I just put on a new PC Chips mobo:A problem has been detected and windows has been shut down to prevent damage to computer. Check to be sure that you have adequate disc space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver up[dates. Try changing video adapters. Check with your hardware vendor for any hardware bios updates. Disable BIOS memory options, such as caching or shadowing. If you need to use safe mode to remove or disable components, please start your computer, press F8 to select advance startup options, and then select safe mode.
I occasionally get a stop message and blue screen. It happens randomly, sometimes I am just on my desktop with no programs running. Here are some details:
STOP: 0x000000D1 (0x00000008, 0x00000002, 0x00000000, 0xF3C70140) atinyvxx.sys - Address F3C70140 base at F3C52000, Date Stamp 41f70216
I have borrowed a school computer for the summer, it runs XP. Today, when I booted it up, it displayed a blue screen with a stop message. "c0000135 <unable to locate component> winsrv was not found. I have spent the afternoon searching for a way to fix this, but all the windows help sites require you to download stuff, and since I can't get the OS to actually turn on, I obviously can't log on to a website.
I have a few computers at home and within the last 3 weeks or so one of them has been displaying and error message with the notorious "Blue Screen of death" as it's background. The computer is running Windows XP Home Edition with all the updates and is scanned every few days using SpyBot Search & Destroy and Adaware SE Personal. I have SpywareBlaster installed and updated daily (if there are any updates) and AVG Antivirus scans daily and it is always updated daily as well.I have not installed any new hardware on this computer nor have I installed any new software either. Just so ya know, neither has anyone else. If something is put on, or done to this computer, I know about it.
This problem has occurred about 3 times while the computer has been on and running for a few hours AND it has also happened once during the bootup and loading of the operating system. (That just happened today). What happens is this. the computer SOUNDS like it is shutting down. Or to be more specific, it sounds as if one of the cooling fans has quit, just like it sounds when the computer is shutting down. I have ruled this out by removing the case cover and visually inspecting all 3 fans, all of which were operating fine. These fans include the PSU fan, CPU fan, and the fan for the tower. That's all there is in this system.
My old computer has a blue screen problem which is intermittent, and usually as it is loading windows, however can happen anytime. It is not a heat problem as it happens as well when the puter is completely cold and started. I ran Memtest for 2 cycles and there were not memory problems showing. I cleared the CMOS and installed a new BIOS battery after that and reset the BIOS to its previous settings. I am running Windows XP Professional Service Pack 3; Board: MSI MS-6380E 1.0; 512 Megabytes Installed Memory [DDR]; 1566 megahertz AMD Athlon XP; Maxtor Hard Drive; RADEON 8500 SERIES [Display adapter]. My screen will suddenly go into Blue screen with the message Driver_IRQL_Not_less_or equal then Stop 0X000000D1 [0X00000004, 0X00000002, 0X00000001, 0X82F8839C] . The Blue screen will frequently then have wide lines appear across the screen so you cant read every line. I took out my video card and reinserted it. Does anyone know the code message translation to identify the area of fault?
I found that i couldnt go to: start-"all programs" and have it work. when clicking all programs it does nothing. then, i remembered a dvd triedinstalling "hot llama" and it was stopped in the middle. I think that may be the issue, tried to do system restore and that wont restore to any date.
Literally every single time I try to use it it doesnt work. always says restortion incomplete. I have it set to use the max disk space. I even tried formatting the hd, reinstalling windows, and then the I tried using it and it didnt even work then.
I cannot create a system restore point, nor is System Retore creating any automatically. I tried rebooting my system, using the check/uncheck box in system properties, using the "Run" line, and trying to run System Restore in Safe Mode. I also tried copying the "framedyn.dll" from the windowssystem32wbem directory to the Windowssystem 32 directory (I don't know if it's supposed to be there or not. The only option I have left that I know of is to reinstall Windows XP.
My computer has several problems. The most serious is not being able to get Windows XP to load.I have tried booting in safe mode (F8) but I keep getting an error screen. I installed a game on the computer today that apparent has caused this problem. Any advice on how I can boot to safe mode to remove the program and do a system restore would be appreciated.
I want to reinstall windows, I have my restoration CD, problem is that the cd driver of my laptop doesnt work, so I got an USB external one. I can use it perfectly during in wndows, but when I intend to use it to boot, it just doesn't happen and continues booting windows from the hard drive.
