About 2 or 3 minutes after booting the computer, a blue error screen appears. It says something about dumping physical memory and to restart the computer. After restarting, it seems to work fine. What the flip?
View 1 Replies
Man, my computer for the last two weeks have been crashing like an emo. I mean, when I play GTA: San Adreas, in 20 minutes, I get a BSOD with a stop error. When I put hardware acceleration to full, in a half an hour, I get a BSOD with a similar error. Believe me, I got three kinds of errors, and some were from different time. I believe the problem either came from the either the PSU, new 512 mb of ram, old 512, CPU, system board, or the graphic card. I'll try to post the error as best as I can. So, is there a solution to this?
Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078) This is one of them, but there another one with KMODE that I can't seem to remember. Also, sometimes, after it tries to recover from a serious error, the computer shuts down during the bootup before I can choose which XP version I can choose.
Also, I hate to say this, but I'm not using a legit windows copy sp1, but I have updated to sp2.
i had XP 2008 virus/spyware, which I think I managed to get rid of with Malwarebytes' Anti Malware and System Mechanic 7. Now I have a new problem. After receiving a recent download from microsoft, upon restarting, I get the blue screen of death with this message; STOP: C000021a (Fatal System Error) The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000)
I can't get anywhere into Windows, I've done F2, F8, F12, everything I could think of without risking more damage. I've booted from the system mechanic CD with the Hard Drive recovery, and while it said it found and fixed a problem, it didn't fix this one.
The start of my problem is that I was receiving an error 'cannot initialize lsass.exe service'.After repairing XP SP2, the following is displayed every time that I boot:SAFE Mode - black screen with 'safe mode' in bottom corners of screen Windows Mode - blue screen.The mouse is responding.There are no icons.There is no text (except for 'safe mode' as above)CTRL/ALT/DEL does not display task manager.CTRL/ESCAPE does not display anything.Clicking on various parts of thescreen has no effect.I have replaced Explorer.exe from c:i386
View 2 Replies View Relatedafter installing Nero my laptop shows blue screen with some error message .i tried to reinstall new operating system it shows now power on the hard disk.
View 1 Replies View RelatedAfter buying and installing the new hardware i'm now having some issues. Everything was fine for weeks but now sometimes i get an error message. This is the 2nd time this has happened. Everything starts up as per normal but once it comes to the Windows screens (desktop) i get a blue screen with the error message: So i pretty much need to restart the pc and it goes back to normal. All hardware and software has been checked time and time again. All seems to be ok. Bar the dvd drive. The dvd drive doesn't let me access it, however if i put a dvd, audio or data cd in then autoplay takes over and asks if i want to play it or whatever. But if i want to open it by double clicking or selecting open after right-clicking then it doesn't allow it. I get the error message: d: not accssible. Incorrect function.
View 1 Replies View RelatedIm am getting STOP - c0000218 Registry file falure the registry cannon load the hive. systemroot/system32/config/security or its log or alternative. It is corrupt, absent , or not writeable. but whatever I do it I end up with the blue page with the eror message on it. I went into the bios setings and made sure that it could be bootable with cd but all in vain.
View 6 Replies View RelatedI run Windows XP and keep finding that when I leave my PC unattended for more than 10 minutes I get a blue screen with a scary message regarding the dumping of physical memory. The error codes in the message are as follows:
stop 0X0000008E, 0XBA40721F, 0XEBC267C, 0X00000000, videoprt.sys - address BA40721F base at BA401000 Date Stamp41107d08
I returned to my computer earlier today and noticed it was a bit sluggish and out of the ordinary. I restart it thinking this will fix the problems, only to find out that its having problems booting up Windows XP. It gets to the window boot up screen and would get a quick flash of a Windows error message(blue screen with yellow text) and would restart and continue this process with no end. I attempted to boot-up from Safe-mode and last windows configuration, yet the problem continued. I decided to bite the bullet and reformat. Here entails my actual problem, I delete the partition and attempted to reformat. Well it begins as it normally would, however it freezes everytime at 1%. I have tried another HDD sadly, I don't think that one has ever worked. It gets power fine, mobo is working correctly. Yet, it could be several things I could've fried my HDD, CPU, RAM any number of things. Yet it dosent seem very possible as I have heat sinks on the RAM and decent cooling in my computer.
View 3 Replies View RelatedCouple weeks ago my friends computer got blue screen error message and we called Dell and they sent us a DVD:
Operating System - Reinstallation DVD Microsoft Windows XP Media Center Version 2005 with Update Rollup 2.
With one of user help i was able to reinstall Windows from DVD. I can not connect to internet through cable.
or I can not turn the wireless adapter on ( F2 button) Or when i try to play sample music with Media Player it gives an error message - Windows Media Player cannot play the file because there is a problem with your sound device. There might not be a sound device installed on your computer, it might be in use by another program, or it might not be functioning properly.
I just build a new comp a couple of weeks ago and i been getting a BSOD occasionally, so far it only happens when playing C&C 3. The error message is Driver IRQL Not less or equal in wind502u.sys. Error code 100000d1 under event viewer.I use a crappy motorolla wireless USB adapter which does give me problems sometimes. Basically, when I start my computer i can go online for 1 minute, then it disconnects. inorder to reconnect i have to unplug and replug in the adapter, then it starts to try to connect to the network.
View 4 Replies View Related2 SATA Raid hard drives with striping.I'm having problems installing Windows XP Pro on my machine. When we first started to install the OS on the machine, I kept getting a blue screen error message before it boots into setup saying ERROR 0X0000007B. And then after that it started showing up book disk failure. Instead of SATA we tried just one EIDE HD, we switched memory, new cables, new powersupply, we switched the vcard. And just recently we finally switched the Motherboard. Now when we boot off disc we get an error message saying "boot disk failure". So we ran a boot setup windows xp floppy. It gets all the way to where it asks for "please insert windows xp installation cd" and when I do it doesnt recognize it but I hear the CD spinning. We've switched out the CD-roms with 2 different ones and still can't get any progress.
View 8 Replies View RelatedMy computer randomly receives this error, and this link here http://support.microsoft.com/default...b;en-us;827663 is what I think I have been receiving. It said this problem should be resolved by updating to SP2. Well I have SP2 and I still am receiving this problem. Could there be any other possible problem that could be interferring here.
View 1 Replies View RelatedI'm getting a blue screen message on a 250 GB Seagate that I just put on a new PC Chips mobo:A problem has been detected and windows has been shut down to prevent damage to computer. Check to be sure that you have adequate disc space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver up[dates. Try changing video adapters. Check with your hardware vendor for any hardware bios updates. Disable BIOS memory options, such as caching or shadowing. If you need to use safe mode to remove or disable components, please start your computer, press F8 to select advance startup options, and then select safe mode.
View 6 Replies View RelatedI occasionally get a stop message and blue screen. It happens randomly, sometimes I am just on my desktop with no programs running. Here are some details:
STOP: 0x000000D1 (0x00000008, 0x00000002, 0x00000000, 0xF3C70140) atinyvxx.sys - Address F3C70140 base at F3C52000, Date Stamp 41f70216
I have borrowed a school computer for the summer, it runs XP. Today, when I booted it up, it displayed a blue screen with a stop message. "c0000135 <unable to locate component> winsrv was not found. I have spent the afternoon searching for a way to fix this, but all the windows help sites require you to download stuff, and since I can't get the OS to actually turn on, I obviously can't log on to a website.
View 4 Replies View RelatedI have a few computers at home and within the last 3 weeks or so one of them has been displaying and error message with the notorious "Blue Screen of death" as it's background. The computer is running Windows XP Home Edition with all the updates and is scanned every few days using SpyBot Search & Destroy and Adaware SE Personal. I have SpywareBlaster installed and updated daily (if there are any updates) and AVG Antivirus scans daily and it is always updated daily as well.I have not installed any new hardware on this computer nor have I installed any new software either. Just so ya know, neither has anyone else. If something is put on, or done to this computer, I know about it.
This problem has occurred about 3 times while the computer has been on and running for a few hours AND it has also happened once during the bootup and loading of the operating system. (That just happened today). What happens is this. the computer SOUNDS like it is shutting down. Or to be more specific, it sounds as if one of the cooling fans has quit, just like it sounds when the computer is shutting down. I have ruled this out by removing the case cover and visually inspecting all 3 fans, all of which were operating fine. These fans include the PSU fan, CPU fan, and the fan for the tower. That's all there is in this system.
My old computer has a blue screen problem which is intermittent, and usually as it is loading windows, however can happen anytime. It is not a heat problem as it happens as well when the puter is completely cold and started. I ran Memtest for 2 cycles and there were not memory problems showing. I cleared the CMOS and installed a new BIOS battery after that and reset the BIOS to its previous settings. I am running Windows XP Professional Service Pack 3; Board: MSI MS-6380E 1.0; 512 Megabytes Installed Memory [DDR]; 1566 megahertz AMD Athlon XP; Maxtor Hard Drive; RADEON 8500 SERIES [Display adapter]. My screen will suddenly go into Blue screen with the message Driver_IRQL_Not_less_or equal then Stop 0X000000D1 [0X00000004, 0X00000002, 0X00000001, 0X82F8839C] . The Blue screen will frequently then have wide lines appear across the screen so you cant read every line. I took out my video card and reinserted it. Does anyone know the code message translation to identify the area of fault?
View 4 Replies View Relatedi shut down while pc was running chkdsk (yes, I now know how stupid that was). I rebooted and that brought me to the blue screen that I have not been able to get past yet. Message reads: stop:0x00000024(0x00190203, 0x83160AB0, 0xC0000102, 0x00000000) I was able to change setup to get it to reboot from the cd drive and used the XP Diagnostics CD to run diagnostics. I ran the diagnostics for blue screen and hard drive errors - all tests passed. (This took several hours). I then tried to reboot from hard drive and got the same blue screen again. i then put in the Windows XP startup disk and came to the recovery console. Here I get a prompt I've never seen before: 1:J:minint
View 11 Replies View RelatedIm getting a BSOD stop message that I cant seem to find a fix for on windows xp. Ive tried running in safe mode and restoring, but its not working. Any suggestions would be very much appreciated. This is the exact message.STOP:c0000269 {illegal system dll relocation} The system dll user32.dll was relocated in memory. The application will not rune properl The relocation occured because the DL C:windowssystem32 tdll.dll occupied an address range reserved for windows system dlls. The vendor supplying the DLL should %s %
View 11 Replies View RelatedWhen start my PC, it shows upto Windows Logon Screen and from there a Blue screen with Memory Dumping Started message occurs. I don't know what needs to be done. When I tried to re-install the windows, the Hard Disk got crashed. I replaced the Hard Disk and when I tried to install the Windows 98/2000/ XP, I faced the same problem. I tried installing windows thru different machine assuming problem with my Mother Board. But the same was repeated.
View 6 Replies View RelatedI have a IMB Thinkpad Laptop running Windows XP that keeps giving me the same blue screen STOP message error. THis happens at random times and at random intervals. The only software installed recently was a gmail notifier and I have already uninstalled that and the blue screen continues to appear. The message is: IQRL_NOT_LESS_OR_EQUAL and recommends I disable BIOS caching and shadowing. The stop message is: ***STOP:0x0000000A (0xFF1711F2, 0x00000002, 0x00000000, 0x804D9B64)
View 6 Replies View RelatedI was given an older machine that had win me installed. It was full of junk and would crash often. So I downloaded a startup disk for formating Win-Me. I ran thru the process - formated the hard drive or so it seemed but when I tried to install winxp it would go thru the process and then get a blue screen stop message. When I restarted the machine I got the message "hard drive capable but disabled". There are ways to enable the drive but you need an operating system to do that. The cd rom on this machine is scsi and I am not familiar with that process. Is there a way to enable a hard drive with out the operating system? The drive is an ultra DMA-mode 4.
View 9 Replies View RelatedAfter around 10-15 min after logging in a program error box opens up saying winlogon.exe fatal error then it switches to a blue screen saying fatal error c0000021a error. I have windows 2000 proffessional and a HP compaq nc6120 laptop.
View 5 Replies View RelatedEncountered a Blue Screen of Death error. The error stated that I should run Chkdsk and then proceeds to restart and bring me to the Windows boot selection screen (safe mode, last known good configuration, normally). No matter which choice I pick, it always leads to the BSOD then restarts. Since this is getting me nowhere fast, I want to just format and reinstall windows. I do not have my recovery CDs, and when I enter the BIOS to change the boot sequence I cannot change it so the CD drive is above the hard drive in priority. The reason it gives me in the bios is that "All items on this menu cannot be modified in user mode. If any items require changes, please consult your system supervisor. Any ideas on how I can boot off the cd and reinstall windows from scratch?
View 10 Replies View RelatedToshiba Satellite running on windows XP
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
STOP: 0x00000024 (0x00190203, 0x83306788, 0xC0000102, 0x00000000)
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation
For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
I couldnt start up windows. It would hang at the windows loading screen and go no further. So I was told to try a repair-install. And thats where even more trouble has started. So I started to repair-install. During the Windows Install setup, it gets almost to the point of being completed, but gave me a blue screen error STOP message at around the "18 minutes left" mark. During "Registering components". It would do this every time at the same spot. So I searched a bit about how to solve the problem. One suggestion I found on the interwebs was to try it with only one stick of ram installed, I have four overall at 2gb. So I tried that, next time I boot up to the comp, it loads up the bios, and then goes to the black windows loading screen with the loading bar, then starts with a blue screen saying "Setup is being restarted" So I figure its restarting my windows installation since it never was completed, after that message, the screen goes black with a cursor, and stays that way forever. I immediately put all the ram back in, and no luck, same thing. I tested each individual ram stick, same thing, just goes black. So now, I can't even seem to re-install windows. Did my hard drive just crap out? Some hardware issue? Im already thinking about buying a new fresh hard drive, installing windows on there, and just moving all my files from the old hard drive over to the new one. Though that would be a pain, I really want to save my current drive! And all the data on it.
View 12 Replies View RelatedI have seen a similar problem posted previously on this forum. But after reading it i think this is a different problem, so, here goes: I recently bought a new graphic card: Radeon all-in-wonder x1800xl. Installed it on a clean system (did a reformat before i installed). The problem occurs after usually 30-60 minutes of gaming (so far with oblivion, black & white 2). The game freezes for about 30 sec and then goes into blue-screen mode.
The message is as follows:
Kernel-Data-inpage-error stop error screen
then there are a lot of numbers etc.
I have sometimes noticed a slight change in fan noise prior to freeze (speeding up)
After reebot everything's back to normal.........
I just recently turned on my laptop and it froze at the welcome screen.I waited a couple of minutes and this error message came up:The instruction at "0x76b21285" referenced memory at "0x00000000". The memory could not be "read".
View 11 Replies View Relatedwhen i switch my pc in the spare room on which the kids use it starts up as normal but when it gets to the blue welcome screen a message comes up and you are unable to go any further. If you click ok to the message then the pc switches off. The message that comes up is:An invalid parameter was passed to a service or function Can anyone advise me what this means and more importantly what can i do to correct the pc, any advice or help would be appreciated.Also above this message it says Isass.exe system error
View 1 Replies View RelatedRecently we've been getting "Blue Screen Errors" on our Windows XP. The most common one is called "Blue Screen error caused by a device or driver." Since they mention a likely hardware or software problem, I suspect our computer screen or speakers might be to blame. A couple months ago, we hooked up a screen and speakers from different brands. I think the screen's brand name is Westinghouse and the model number is LCM-17v8, and I think the speakers brand name is The Digital Experience inc., Model number gem 2.0 USB.
We've also gotten other error messages along with this one, such as "Address a problem with your computer", also strongly suggesting a problem with hardware, and "Troubleshoot a problem with your audio software". Is it possible that the screen or speakers may be incompatible with the computer, resulting in these errors, or would it be something else?
