I use this program on my desktop and it runs perfectly. The laptop is a different story. This program defrags the page files on reboot. On the laptop this program does not work. After the system reboots, the laptop freezes and the defrag process never starts. In order to get back to my desktop, I have to remove the battery and unplug the computer. I then have to reboot from "last good configuration". Why the difference between the desktop and the laptop?
Recently reinstalled xp and one of the first installations were various drivers. I notice that a vga driver icon for asus gamer osd starts every time i boot up and appears in my task bar which has to be removed. The settings do not have any preferences on not to start this at windows start. When i click on start all programs start up it does not appear there.
I was uninstalling an anti virus program the other day, and it told me to reboot the computer. Hitting restart, did nothing (in the program dialog) so I manually rebooted.Since then, I've tried to install Kaspersky, and Nero, and both tell me "A previous program requires a system reboot, please reboot". I have, multiple time. I can't get rid of this error.Is there some sort of registry entry for the specific program I was uninstalling that may be stuck?
It is frustrating having every program automatically install to program files, including minor things like audio attachment. I know I'll end up with tons and tons of folders in program files. Beyond that, I can't access program files from the other computers on the network. Is there a good way to reorganize/move files to my C drive in a way that would be efficient and wouldn't require reinstalling every single program in a different place?
Um.. I think this could go here. Well i just partitioned my hard drive and i seperated it by music, programs, etc. What im trying to do is get all my programs to use the seperate partition (E) instead of C:. I just wanted to know how to do this.
Can you create a pagefile.sys on removable HDD's? I apparently cannot. I wanted to set an initial and max Pagefile amount of 500MB to 750MB each across all drives except C. Even though the system "seems" to have set the amount of space I allocated in the Virtual Memory section, it has created only ONE 500MB pagefile.sys on my H (fixed) drive. That amount is confirmed on the Advanced Tab for Performance Options section by the statement "Total Paging File For All Drives: 500". I have set a small initial and max amount of 2MB to 50MB on my system drive (C) which is recommended since you do not want a large swap file on the same HDD as your OS, but that does not show neither. Why did the system not create the other Swap Files? Does it have to need it before it creates it?
I'm using Win XP and, using the built in Zip feature,have zipped up 14 files that include one .exe file and one .bas file.When I try to Extract All files it extracts all except these two files.It says that the files have been blocked to protect the computer, then I can click on a link to find out how to unblock the files but the instructions to do so don't make sense.The instructions tell you to save the file, then right click/properties/unblock, but I can't see how you can save a file if it hasn't been unzipped.How can I stop the .exe and .bas files from being blocked
I just want to know what files I should copy for a backup disk? I really only would be concerned about my operating system, not any personal files. Basically, I want to know which specific files, (or sets of files) are required for an emergency reboot. I feel sorta stupid asking this, but recent events have shown me how ethereal and fragile computer programs can be. like wisps of smoke.
My XP Home SP2 computer starts and runs just fine. No normal booting problems at all but I tried to boot it into safe mode a few days ago to have a look at something. It won't do it. No matter if I try safe mode or command prompt safe mode, it won't finish the boot. It simply goes to reboot after loading the list of files. It's not a big deal now but one of these days I'm sure I'll need safe mode for something.
I'm using Windows XP Pro SP2 I have encountered what seems to be an undocumented feature of the file move action.I saved a web page including associated files from either IE7 or Firefox2.If I move the associated files folder to an other location the .htm file moves with it. Why? Who told it to do that? Where is the user configurable option for to link a file to a folder? Where is the global system behaviour option to enable this non standard file system behavior? If you move the associated files folder to an other location which happens to contain a .htm file with the same name (eg the very common index.htm file), the undocumented behaviour described above will still occur and the file will be overwritten without ANY standard file conflict warning and without any user choice in the matter.
I was uninstalling all my aol files, it said to reboot the computer for the changes to take effect, So I did so, and then the desktop icons, the mouse cursor, and all my windows are now enlarged! I have rebooted 3 times to try to re-start windows into a normal mode, but it won't change. How do I restore windows to their original configuration?
I recently started using DVD Decrypter to rip some of my DVD's and then convert them to play on my Sony Playstation Portable (using PSP video 9) And it's working great.Now that I know how to do this, (rip tracks off of DVD'S) I was just wondering if anyone can tell me what the BEST program is, or what people use, to use those .vob files and turn them into .AVI files or .MPEG files, so that I can carry them with me on my laptop.
running XP setup from CD to try to do a repair results in "no installed drives found." when placed in another system as a slave, its found as quickly as the master HD is when its alone, and seems to function normally - chkdsk & surface scan find no errors & kaspersky finds no MBR or other problems. i even used TestDisk to rewrite the partition table and MBR to no avail. i'm able to copy off all my files, but would like to know if there are other things i can try. is there a way to XP setup repair / replace boot files on a drive other than C:? or can i use anything from a working system to fix the slave drive? can i ghost the partition and put it on a new HD and run repair there or will the boot problems be copied with the image?
Last night XP was just fine,and this morning at first boot up, the typical files appeared when there is a problem...win.com, DBluff,Himem and etc were either missing or corrupted....So no way to restore it, the recovery disk couldn't,so I had to reinstall it on another partition.I wanted to copy my AOL program over to the new partition from the C drive and its just not there...gone. How is this possible?
Recently I retreived a bunch of my pictures off of our church computer.I burned them to disk with some Roxio program.I brought them to home computer and put them in the appropriate file with other pictures from same event.It was my intention to make one CD with all pictures from same event on it.I selected pictures, hit properties had quite a bit of hang time.I selected all pictures for burning.I told the burner what to do using the Win XP pro directions (wizard?) and walked away. DIdn't work, had a problem.Low on memory, so I rebooted. Came back and deleted a bunch of pics that had been archived.Selected pics again, but during the time it was transferring files to the CD (before the wizard) it put up a black screen with a bunch of information that flashed too quickly to read before it rebooted.
When I try to send a multi-page fax from WORD or Power-Point, only the first page or slide appears in the FAX. This is a recently developed problem. I've successfully sent multi-page FAXes in the past.
I continuously get 'ERROR this page cannot be displayed' when I try to send a greeting card or access another web page. What is going on? I tried to fix and enabled all that I thought was necessary on settings.
I often right click in IE and select Create Shortcut.It puts a shortcut and my desktop to that page. This mysteriously stopped working. The icon appears on my desktop with the page title and all, but when I double click it, it just opens up my browser and loads about:blank.In the shortcut file's properties, and then gives me the file's size, location,etc.but it doesn't list the URL anywhere. It's just getting on my nerves having to copy a page's URL to a text file on my desktop if I want to remind myself of something.
I was listening to some Good Charlotte, and in my D: and all the sudden I get a blue screen sayin page fault none page area... I also got this problem when I tried to reinstall Media Player 9. It sounds like some system file is triggering tihs
in a fit of "I'm going to clean all the old junk off my computer"... I accidently started to remove something connected to ATI. Then the computer froze. Now when I try to reboot I get the blue screen with the Page Fault in Non Page Area message. I have tried a System Restore
I am trying to delete the programs on C:Program Files that I dont need such as MSN Gaming Zone, Outlook Express, Netmeeting etc.But it wont let me it comes up with this error:Error Deleting File or FolderCannot delete Windows: It is being used by another person or program.Close any programs that might be using the file and try again.But there are not any programs open to my knowledge that use the programs I am trying to delete.
I picked up some crappy malware called ?Windows Police? last night while I was surfing for player info for my fantasy football league. I immediately ran a scan using AVG, but in my impatience and worry over getting this infection I googled for information and found instructions at this web site. So I mistakenly tried to follow them. Unfortunately I must have made an error in there somewhere because now I?m having problems opening program files. AVG scrubbed the virus but now I cannot open program files. Either the program cannot be found or I get the ?Open With? pop up menu. I?ve tried to run the WMI diagnostic but can?t get that to work either. Is this fixable?
I got this error when I installed Advance System Care and when i scanned my USB with noob killer. Then the P.C restarted and it started to displays the page fault in non page area. The problem is when i boot in window xp cd it display this BOD error and when i boot Safe mode and Start windows normally it only reboot the P.C. So there is no way i can access the control tab window xp
i am having trouble when i try to open a new page from a link. it is not happening all the time but enough to make it annoying. it may be my security settings but i am not sure, that is why i am asking for help. it also won't let me open sponsored links from google etc.
when I connect to the internet (dial up), my home page doesn't come up, instead I get a "page cannot be displayed. If I right click on my ISP provider and click "open home page" then it will come up. I've tried various "solutions" yet still have problem. Even when the home page is up, the other is lurking behind it.
I am using a computer with Win98se on it, but have been given one with XP Home loaded on it,which is a new "learning curve" for me. I like Excite as my home page,but am having trouble loading it on the XP machine. I have checked these forums and Googled it, but can't seem to find an answer to my particular problem. When I attempt to load Excite,all I get is a blank page with a left and right arrow and pause button in the middle left of the page. The address is correct on the address line.
