My System Information Tool not fully working, display will be blank in some categories and display in others. Will not display anything in Hardware categories, will display everything in Components, it will not display Signed Drivers in Software Enviroment but will display other categories.
View 1 Replies
When I try to open System Information, I get the message; 'Can't Collect Information.' A network error occurred in connecting to Windows Management
Instrumentation. Can this be fixed or do I have to reinstall XP? Also Defrag will not work and the Icon for Windows Update doesn't work.
i have a problem with explorer.exe process in my system when i boot, in desktop the tray icons boot for some time (tat too not all tray icons) and after tat they again repeat from beggining this keeps repeating and also my desktop icons are not there, i tried adding a new process explorer.exe in taskmanager its still the same ,i also tried system restore still not working i have windows xp sp2
View 6 Replies View RelatedI have a new ECS 755-A2 board with a new Sempron CPU and a evga FX5200 AGP card. Nothing exotic or cutting edge. Everything seems to work OK, I can do all my normal tasks, everything looks great. New HDs, new PS, new install of XP Pro SP2. I can work for a couple of hours with no problems of any kind.At some point after just a few minutes of user inactivity, however, anything on the screen that happens to be moving, such as an animated "progress" bar, freezes for a second or two, then the screen goes black and the system crashes hard until reset/reboot. It's not merely the monitor going black, it's a full system lockup. If I have streaming audio going, say, it will stop at the same time. The system is fully crashed. IDE light is on permanently until reset. Keyboard input is ineffective.
View 1 Replies View RelatedI currently have 2Gb (2x 1Gb sticks) DDR2 800 RAM in my system and saw an offer for the same RAM for 1/3 off the price I'd paid before so I decided to grab it while it was there. However, when I install the extra 2x 1Gb sticks the system won't boot fully and I don't know why. When I took them out and left the original 2x 1Gb sticks in the system works normally. I'm going to switch the sticks around to see if it's faulty RAM or bad RAM slots but it works fine in the BIOS and booting up. As soon as I enter Windows and login it the keyboard LED goes off, the mouse LED stays on and the system freezes. than switching the RAM out to test the slots on the motherboard?
View 9 Replies View Relatedmy compy has been broken for almost a year, but i finally took it upon myself to find a solution. i followed the instructions for the problem "the system is not fully installed. please run setup again." and it seemed it was going to work. but now i'm getting stuck at this screen that says "please wait while windows prepares to start" and the dots just keep going forever! XD it feels like i'm close to finally fixing the frickin thing, but i can't get past this. so if someone could please tell me how to get past it, i'll give a virtual pat on the back. oh, and it's a compaq windows XP.
View 6 Replies View RelatedI have a machine with an 120 day Evaluation version of XP Pro. I am now getting the - You have 30 days to Upgrade this Evaluation version warning message.The System is fully tuned and honed to perfection, so what I would like to know, now that I do have a full version is - how can I do this without re-installing everything?Can I change the ProductKey number? Is there a way to overlay the Full version? Can I change a file or files which will allow me to keep the installation I have now?If I use a couple 'a diskettes can I at least transfer the current settings to another installation?
View 2 Replies View RelatedWhen I start System Information (msinfo32.msc) it gives me, in the info panel, the following message: Can't collect information Cannot access the Windows Management Informationsoftware. Windows Mangement files might be moved or missing. I checked if the WMI service is not disabled (it is automatically started, the default).In Microsoft Mangement Console, under Services and Application, I have WMI Control. R-click, properties, and: Failed to connect to <local computer> because "Interface: class not registered"
I have been trying to remove a tool bar called 'security tool bar 7.1' I think its a rouge.
View 2 Replies View RelatedIt did not come with Windows installed, but came with the Windows SP1 disc and drivers and such. I installed all those, and was off to a great start. But a few hours later, I discovered I couldn't open System Restore, System Information, or Windows Media Player. Since these are all applications that come with Windows, I figured I must have messed up the installation. Being on moderately knowledgeable about computers, many times, my solution is to simply reinstall a program. So, I figured, I have this installation disc still sitting here from just a few hours ago, why not just give it another go?
View 6 Replies View RelatedThe System Volume Information Folders contain your System Restore points. You can delete the oldest ones manually if you like. These folders are hidden system folders on each drive. In order to gain access, follow the directions below depending on your version of XP and File System:Windows XP Professional or Windows XP Home Edition Using the FAT32 File System Click Start , and then click My Computer On the Tools menu, click Folder Options On the View tab, click Show hidden files and foldersClear the Hide protected operating system files (Recommended) check box Click Yes when you are prompted to confirm the change Click OKÂ
View 9 Replies View RelatedI use to update my Xp SP-2 regularly from MS website. Now a days it is insisting to install "Windows Genuine Advantage Validation Tool (KB892130)" first to proceed for downloading update files.Is it a FORCE or I can bypass this tool. I do not want to install it, as somebody told me this is a tool by MS to takeout personal information on my OS (XP) and MS Office and other MS Software.I know I use genuine legal copy.But why should I allow MS to take more information ? Is not WPA through internet is not sufficient ? Can this tool take information on other products/3rd party software like NERO,MS OFFICE and ArcSOft ?
View 1 Replies View RelatedI just received a used laptop with Windows 2000. Is it possible to change the "System Name" under "System Information"?
View 2 Replies View RelatedToday I tried to access my System Information and came across a problem which said It could not access the Windows Management Instrumentation software. Can someone help me repair this since I really want this fixed.
View 11 Replies View RelatedI run WinXP Pro SP2, and when I initiate the following sequence:
Start -> All Programs -> Accessories -> System Tools -> System Information
the Help and Support Center Window comes up.
This also happens with Start -> Run -> msinfo32
I tried to use MS backup tool to make a full backup of my whole system in order to restore it in another new machine. It fails because MS backup could not make a full backup, since the administrator does not have access to any file in the system (some directories, files, etc. are not allowed to be read by the admin). Meanwhile, ghost and partition magic for instance allows to copy the whole HD partition.Does anybody know if MS backup can really make a full system backup (with different access rights, multiple users on the machine, etc.), and then to restore this system into a new machine (same model, same hardware profile).That is, is a system duplication la-ghost possible with MS backup ?Is MS backup allows only to copy and restore personal accessible files, I do not understand why such tool exist since any standard copy and compress method would make the same thing. The real backup is when the system can be restored.
View 2 Replies View RelatedI want to change ram amount information in system properties of my computer
View 3 Replies View RelatedWhen I attempt to open the C:System Volume Information folder so I can view the contents of the _restore folder, I receive the message seen in this screenshot.If I do a "search" for the _restore folder, nothing appears.I don't recall having this problem before the hard drive was replaced and Windows XP SP2 was reinstalled from scratch.I know that System Restore is working because I've created several restore points before installing new or updated hardware drivers.
View 7 Replies View RelatedI've been doing some system maintenance to keep everything running smoothly and correctly. What the problem is that when i go to properties for my computer(system information) it reads out.
View 2 Replies View RelatedI had a problem with my external hard drive…which I informed you guys about. I was advised to solve the problem (potentially) using chkdsk on the drive. It worked to an extent Some, in fact the majority of files were recovered. However the problem remains in that not all files were recovered and NOW one file…when clicked on to gain access I am told that the drive is not formatted and would I like to format it now. Of course, I would not as the information is important. I enclose a copy of my previous letter to give you a full spectra of the saga.I am having problems with an external hard drive I purchased about a year ago. Files seem to be disappearing. I have a file which contained about 12gb of information (music files etc). The file now only has 88mb of information. It is the top part of the files but as you can see is only a raction of what it used to be. What has happened to the files? I have done a search in the drive…and no sign of them. Also, the system information does not register any
increase on the ‘free space’ of the drive. I am at a loss. What is happening? Can I retrieve the files? It is really punishing to think that they may be lost to me for good.
Cannot see any sign of the System Volume Information folder in Explorer or any other file browser program I try. It is not grayed out, it is not there. When I enter Tools, Folder Options, View, the Show hidden files and folders is selected. As a matter of fact, if I then select Do not show hidden files and folders, the next time I open View, it has gone back to Show hidden files and folders! Even though hidden folders should therefore show, the SVI folder remains hidden. I have examined my system by booting with BartPE XPE and there is the SVI folder with all the restore points, etc. I am using XPPRO, NTFS.
View 8 Replies View RelatedI cannot open msconfig on my computer! Whenever I type in "msconfig" in the Run box, it says it cannot find it.And whenever I open System Information, it says that I need to start the service "Help and Support", but in the Services, there is no "Help and Support". I use SIW now, but I still wanna know why it won't work.
View 9 Replies View RelatedWhen I try to go to the system information page it goes to the Help and Support page instead. I've tried the Start/Programs/Accessories/System Tools way and also tried Start/Run/msinfo32.exe and again through the HelpandSupport page and the same thing happens. Have searched the net and found other people who have the same problem and tried some suggestions but nothing has worked so far. I know I can do a re-install but don't want that route if there's no other way.
View 1 Replies View RelatedI'm tryin gto format my Hard drive and i'm running wins XP Pro OP sysem. i have tried to use the CD to format but there is no information on the CD to format XP. So having said this
View 1 Replies View RelatedThe System Volume Information Folders contain your System Restore points. You can delete all or just the oldest ones manually if you like (but they must be sequential). These folders are hidden system folders on each drive. In order to gain access, follow the directions below depending on your version of XP and File System:Windows XP Professional or Windows XP Home Edition Using the FAT32 File System Click Start , and then click My Computer On the Tools menu, click Folder Options On the View tab, click Show hidden files and foldersClear the Hide protected operating system files (Recommended) check box Click Yes when you are prompted to confirm the change Click OK Double-click the System Volume Information folder in the root folder to open it Windows XP Professional Using the NTFS File System on a Domain Click Start , and then click My Computer On the Tools menu, click Folder Options. On the View tab, click Show hidden filesand folders Clear the Hide protected operating system files (Recommended) check boxClick Yes when you are prompted to confirm the change Click OK Right-click the System Volume Information folder in the root folder, and then click Sharing and Security Click the Security tab Click Add , and then type the name of the user to whom you want to give access to the folder. Choose the account location if appropriate (either local or from the domain). Typically, this is the account with which you are logged on. Click OK , and then click OK Double-click the System Volume Information folder in the root folder to open it Windows XP Professional using the NTFS File System on a Workgroup Click Start, and then click My Computer On the Tools menu, click Folder Options On the View tab, click Show hidden files and folders Clear the Hide protected operating system files (Recommended) check box.
Click Yes when you are prompted to confirm the change Clear the Use simple file sharing (Recommended) check box Click OK Right-click the System Volume Information folder in the root folder, and then click Sharing and Security Click the Security tab Click Add , and then type the name of the user to whom you want to give access to the folder. Typically, this is the account with which you are logged on. Click OK , and then click OK Double-click the System Volume Information folder in the root folder to open it Windows XP Home Edition Using the NTFS File System In Windows XP Home Edition with the NTFS file system, you must use the Cacls tool, which is a command-line tool to display or modify file or folder access control lists (ACLs) Click Start , click Run , type cmd , and then click OK Make sure that you are in the root folder of the partition for which you want to gain access to the System Volume Information folder. For example, to gain access the the C:System Volume Information folder, make sure that you are in the root folder of drive C (at a "C:" prompt). To get to the root of any partition, make sure you are in that partition and then type "cd" (without the quotation marks).Type the following line, and then press ENTER: cacls " driveletter :System Volume Information" /E /G username :F Make sure to type the quotation marks as indicated. Also, if your user name contains a space you'll need to put your username in quotes. This command adds the specified user to the folder with Full Control permissionsDouble-click the System Volume Information folder in the root folder to open it If you need to remove the permissions after troubleshooting, type the following line at a command prompt: cacls " driveletter :System Volume Information" /E /R username This command removes all permissions for the specified user.
I think I have System Volume Information virus on my laptop.Im using Norton Internet Security 2008.I using window XP home edition.Im trying to remove the files for both drive c and my partition drive thru system restore disable but when I restart still there.Can someone help me?
View 7 Replies View RelatedI want to thank this very useful site for teaching me a lots of TWEAKING TIPS. So, as a gesture of my appreciation I want to share this simple tweak I learned. Please run notepad and paste this text: ave it as oeminfo.ini in C:WINDOWSSystem 32. You can also create a bitmap file and name it as oemlogo.bmp, save it in C:WINDOWSSystem 32. Now, try to hold down Win key while pressing Pause/break.You'll notice that the text and image you created will appear in your System properties.Â
View 9 Replies View RelatedI have tried to get into system information via Programmes, Accessories, System Tools and it won't load. I get an error message saying Microsoft Help and Support has encountered a problem and needs to close. I was trying to see what was going on with a usb/sony camera problem and only just noticed that I didnt have system information to refer to.
View 14 Replies View RelatedIt used to be, when I clicked on All Programs > Accessories > System Tools > System Information, I would get a small text box that popped up on the screen with a lot of information of the system, including the amount of memory installed and the amount used, the size of the hard drive and the amount used, ect., and it would also have a small text box at the bottom that would let one search system information.
Now, suddenly,when I go to System Information and click on it, it simply gives me the Windows Help and Support Center.I know that I can use Everest to find the same info,but this little Windows info box was handy and quick,especially for just checking memory usage. I think the that it is the Msinfo32.exe But even when I put that in the "Run" box, it still simply gives me the Windows Help and Support Center.
Is it possible for me to use the system repair tool (the one that comes up when you boot from the Windows XP CD and press R at the menu) to format only a specific partition on a hard drive, or do you always have to erase the whole drive.
View 10 Replies View RelatedBought pc it came with something called RAID TOOL i have no idea what this is but, if i was to reinstall windows would it be crucial that this was reinstalled with it? or could i just reinstall windows xp from the disc and not worry about it?
View 6 Replies View Related
