I just purchased a 74G western digital raptor drive and want to use it as my system drive, however, I have the PERFECT installation of windows (XP Pro) on my current system drive (a mostly full 320G sata drive).Make the raptor be bootable/system drive, basically move the install of windows (documents and setting folder, windows folder, program files folder, MBR/all system files and folders) to the new raptor and then re-assign the raptor to be drive C (so all references would be correct).The windows install I currently have is ancient but perfect, and I don�t have the discs for many of the programs on the system (TONS OF THEM). So I really want to avoid re-installing windows (the obvious way to do this). I also can�t use Norton ghost because the old drive has 280G of stuff and the raptor is only 74G.Is this possible? If so are there and tools/hints that could help me?
i have a custom computer build, working fine for a year and a half, system crashed while online. inserted windows XP system/boot disc, goes to mobo screen, goest to a blank screen. shows press any key to boot from cd. then verifying/inspecting system components etc. then a blank screen, system wont do anything.
hey everyone. I've got a really weird one for you. I partitioned and formatted my hard drive into a 15gb windows/system partition and the rest for everything else (music data games, etc). When i installed XP home to the 15gb partition, everything is fine until i try to move a window in windows. When i click the top part to drag a window around, it responds super slow and whichever program i'm trying to drag shows a huge cpu use spike in task manager. I'm running a 3.2 ghz, 1 gig ram rig. Never seen this before, anyone have any ideas what might be causing it? Could it be some sort of virus left over that my format didn't catch?
I want to set up a new pc with Win7 and XP Pro in a dual boot setup. What I would love to do is migrate my existing harddrive from my current computer to the new one. I am aware of the changes of OEM XP software, however, if I was to do it could I use a new OEM install key to reauthorize the old (existing) installation? The one I want to move is an OEM as well, and I know that the existing key won't work. Or, do I need a "retail" version XP key? Or, is the best way to proceed to install a new OEM XP installation on the new computer and migrate all my applications?
I have a problem with XP, after starting up I get a message on the screen asking me to " place the windows cd in the disc station " , this has only started to happen after I used windows update, I have a legal version of XP.
I was overclocking my cpu cause i replaced the stock fan with a cooling system and while i was overclocking i got a blue screen. So, i rebooted my comp and it says a file is missing or corrupt ( forgot what file something windows/system/config) and told me to repair it. and it wont let me use my windows xp disc. I set my cd-rom to 1st priority, im posititve my cd drives work, and the cd has only been used twice so im pretty sure it cant be that.
I have just installed new memory,new graphics card geforce 8800gt,new power supply,and new sata hard drive.
I have made a floppy disk from the motherboard cd for installing the drivers during windows instillation from my old pc first.
I switched on new pc to load windows and i get no signal on my monitor also my usb mouse and usb keyboard does not light up,iget power to motherboard and case fans +dvd drive,i have put my windows xp os disc into dvd drive and basically it does nothing.
Do i need to make a windows boot disc or something to start instillation.
I still have windows loaded on my secondary sata hdd but the system32 is corrupt,so i have opted to install new sata hdd,then transfer my files from secondary hdd,once that is done gonna format secondary drive and use it for storage.So i still have the option of entering the bios on my motherboard if i connect it up and disconnect the other drive.
I have left the drive disconnected while i install windows then gonna plug it in after windows installation.
When I booted up I got a windows installer screen asking to put in the disc to install paint shop. Since I was on the road and did not have the disc with me and don't use Paint shop I uninstalled it. when I boot I get a screen that just says windows Installer and it is very hard to cancel it
I have recently bought a new computer that came with windows vista as you may have guessed the experience mostly has not been a good one, with lots of compatibility issues. I want to dual boot Vista with XP but the problem is I have heard windows XP does not have the SATA drivers on the disc. I understand that you just need to insert a floppy and push F6 I think but the problem is I don't have a floppy drive! Is there anyway I can slipstream the drivers into the install or something?
Running XP Pro with 1 DVD ROM and 1 CDR drive. Whenever I remove media from a drive and replace with a new disc, windows only displays the old data and doesn't recognize the new disc. Especially frustrating during a multi disc install. Sometimes it will refresh if I eject the disc through a menu vs. drive button. Other times this doesn't work. This happens with both drives, so it doesn't seem to be hardware issue.
Oem disc auto partions any hdd as 16GB os fat 32/D:\ drive NTFS raw. The Sony OEM disc(s) are pre sp1. What steps do I take to install and get the full 200 GB to bea recoginized correctly?
I'm sure this has been asked 100 times before but my computer randomly shuts itself down so I don't really have the time to look for it. I need to reinstall Windows XP. I want to do a clean install. I have the disc and the reg code. What I don't have is the BOOT FROM DISC option!! How do I get it or how do I do it?
Have WindowsXP Home (OEM generic) installed. Can I purchase a "license" and use the disc to install on another unit? Second unit has Windows98se installed. Will I be able to install WindowsXP using this disc?
A friend has XP Pro on their computer with the product ID tag stuck on the case. She doesnt have the disc. She needs to reinstall (Her box is past help). Does anyone know if its okay to use another disc with her product ID? I think it must be, cuz its the number thats unique, right?If its okay, my real question is does anyone know a source of XP Pro without a product # on-line? Initial searches didnt turn anything up.
I have an HP computer that only has the system recovery disc and not the full xp disc. SP2 came with the install. I have an XP disc just with SP1a can I do a repair install with that and then just install SP2 after?
If i was to install service pack 2, via the disc i have, and i dont like what it has done to my computer, will i be able to refer back to a System Restore Point i created before installation?
if i do a clean install of windows xp to replace windows vista, will it create a windows.old folder that has all the stuff i had from before the clean install?
HI, I just installed windows 2000 professional onto my computer. Everything works fine except that the resolution is really grainy. On some web sites I cannot even make out what the words are. I found out that when I go into my monitor settings in display properties I am unable to install the drivers for my monitor. Does anybody know a way in which I can get around this.
I'm running XP Home on a Sony VAIO. The PC has a partitioned HD: C (main), & D (storage). I defrag every night.
This evening, I got the dreaded "not enough disc space to complete disc defragmenter" message. Suddenly tonight I'm showing only 2% free space on drive C. I went in and changed my System Restore percentage from 12% to 6%. Now I'm showing 6% free space (but still can't defrag).
I shouldn't have had to change my System Restore percentage tho. I'm sure that's not the culprit. Up until last night the C drive was nowhere near this full. Something's there tonight that wasn't yesterday. ...A whole LOT of something. The Defrag graph is showing a nearly FULL C drive with a LOT of red "fragmented" files"
I've been doing a bit of downloading, but after it's on the desktop (part of C), I move it to the D storage drive (which has a LOT of free space remaining).
Something's fishy. I'm no expert, but I'm thinking I need to find some type of application to tell me what's suddenly on that drive taking up all this space. Anyone have any helpful suggestions?
neither wmp 11 or roxio recognizes a blank disc. when i try to burn a disc (dvd or cd) both wmp 11 and roxio tells me to insert a blank disc. i have tried putting a disc in first, or wait for the program to tell me to insert disc but neither way works!:
My system is running with Windows 2000. Now, I just want to install Windows 98 on a separate logic drive, but it is immpossible to run the setup programm under windows 2000. How can i install windows 98 just the same.
I have two computers, one I use for gaming, the other for school. Both computers had 60gb Maxtor (school with lots of room, gaming with about 10 gb free). My school HD took a powder (the evil clicky noise of doom), but I was able to back up my files prior to that. Me being a quick thinker, I decide to upgrade my gamer puter to a 120gb (don't wanna go too nutso, as I am considering building a much superior computer), and put the good 60 gb in my old Athlon 700. Problem? I cannot get Windows XP Home to complete install on my gamer computer. (Athlon 700 installed just fine with 'good' 60gb).Gamer Computer: Athlon 1800+, 512MB DDR Ram 2100, KR7A Raid MOBO, GeForce3 Ti 200 (128MB DDR RAM), SB Audigy 2(AGP).
It is a RAID mobo, but i do not use the raid functionality, I did not have a problem before(I have my HD and my 2 roms on ide now). I go through the install steps, and I get to the very very end, where it states you are about to start Windows XP, and then it hangs, and thats it.I have tried to ensure there are no conflicts, I pulled out my sound card as well as my network card, and 're-seated' my video card and RAM. I have tried looking at using a winxp bootup floppy, booted into safe mode (the only error it detects is the missing RAID, no conflicts detected there). Heck, I even swapped out mouse and keyboard. I tried putting back the good 60gb back in the pc, and reformatting, but still get the same thing(sometimes the screen is black, sometimes the icky blue of xp, but that's it).I have no idea now. I did make sure that my bios was up to date before taking down the system originally, and it was, so no change was made there. Even swapped out the ribbon cables to ensure nothing was damaged on original removal.
My packard bell notebook model (easynote) E-3242 running windows XP. After installing SP2, XP wont load, even in safe mode. I already used cd-bootable Knoppix to copy all documents i needed to rescue. At this point a complete Re-install would be great, but alas, no install disk came with this notebook, And i lost the recovery discs i made. I do NOT have any XP disc available.How can I begin a re-install or similiar from the Hardisk with no Discs?
I get a little confused by terms like restore vs recovery, which are often interchanged incorrectly IMO -and then there are the terms bootable disc and startup disc, which can also get confusing - and I have seen other terms used also.
please explain exactly what you mean by the "bootable XP CD". I have a new XPsp2 home edition pc, and I had a millennium before that (which I made a "startup disc" for in add/remove programs - so I guess a startup disc is yet another term for boot disc - it was only a 3-1/2" diskette (less than a meg), and it would get my millennium to boot by typing "scanreg /restore" at a prompt that you eventually came to.
For my XP, I immediately made a Compaq "recovery dvd" (it took 2-dvd's) utilizing the "Compaq recovery cd-dvd creator" in start/programs/pc tools. This dvd (can also use cd's but it takes 8 or 9 cd's I believe) contains everything that is on the pc (from the factory), and which is also in the system recovery partition D:. There is also something called a "Recovery Tools CD", which I did not burn, since it did not seem necessary, after reading about it in the "troubleshooting and system recovery guide" that came with my Compaq. I will burn that one to, if you can explain what it will do, that I can't ultimately achieve by using the "recovery dvd". The manual said that one of the things the "recovery tools cd" did was to remove the system recovery partition (drive D), so you could use it - but I'm sure there is another way of doing that from within the pc once you got it running using the recovery dvd - am I right - I've never messed around with partitioning, since I have no need to.
My new XP did not come with any "bootable CD" per se, and I made the "recovery dvd", as stated above. So please shed some light on what the "bootable XP CD" is that you refer to (because you said that a "restore Cd is really overkill" - I assume you mean the "recovery CD" that I mentioned). Also please provide your comments on the "recovery tools CD", and any other comments you have on the various terminologies I have mentioned above.
