I have a "Shadow Star Icon" from a Microsoft website informing me that Microsoft is unable to validate my operating system. It launches everytime I start the computer and several times throughout the day. At startup the computer will not get to the home screen without making a selection of whether to correct now or later. It offers me the opportunity to "purchase validation." Everything on my computer is legitemate. I've looked in the System Configuration Utility (msconfig.exe) startup and services and don't recognize it. I have a HP Pavilion a647c, w/Windows XP. This is the site that it directs me too:If you scroll to the 3rd section of the webpage you will see the "star" that I refrenced earlier. Bottom line is I don't know if this is for real.
Computer has a bad virus and am planning on wiping the drive and re-installing windows. Problem is that I cannot find my key code to validate windows. Is it somewhere on my computer?
I am a newbie and would apreciate any help/advice with my enquiry. I have a problem with the Windows XP Pro Sp2 I recently purchased. I am unable to update/validate it as it states that it is not genuine for home use, & only has a VLK licence.
OS NameMicrosoft Windows XP Home EditionI have finally been put into the position of a must have win XP...ok...but now seem to be running slow even after defrag seems like a time thing...in that I get that slow movement on some things but not on others...think I have enough memory & a 20gb hard disk I have also run an up to date virus & spybot they all check out OK...I am really lost in the amount of information available on the xp forum...quite good but feel that there must be a smarter place to start looking
I have a friend who has a pentium 2 350 which is currently running on Windows 98SE...yikes!My friend has been complaining that their computer has been running slow and that pop ups are appearing everywhere. I told them that it sounds like their computer has been hijacked and that I would recommend that they format their computer and start from fresh.I want to format their computer and install a newer windows OS (perhaps windows xp) and install a couple of spyware/antivirus programs.
I shut off the computer and turning it back on couldn't boot up windows. It gave the windows wasn't shut down properly and I tried the normal restart option and it would just give a black screen with a blinking _ and then nothing happens. Tried loading in safe mode but it gets to mup.sys then "Press Esc to cancel SPTD.sys" flashes below and whether I press Esc or let it be, nothing happens after that.
I tried popping in the windows xp disc that came with the laptop, boot from disc, it starts up but then after loading everything, it then says "Windows is starting up" the disc stops spinning then nothing happens. I tried popping in a windows vista disc and it says "Windows is loading files" with a progress bar, when it fills up, I get stuck with a blank black screen the disc stops spinning and then nothing happens.
I tried to format my windows XP but it gives me the following message "windows did not find any hardisk installed in your pc" it is not the exact words but it is something close to it in other words windows could not find my hardisk
I have been handed a PC to "sort out". It`s OS is XP Home.The problem being, that when it is switched on, it brings up the following screen We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. Start in safe mode.Safe mode with networking.Safe mode with command prompt.Last known good configuration setting (most recent setting that worked). Start Windows normally.But whichever option you select, the computer simply reboots and brings up the above screen again.
My son has a 3 year old Compaq computer which is running Windows XP home. He had been asking me for a while to reinstall the operating system to get his sister's stuff off of it since she now has a laptop. The computer came with its own recovery system built in, so I did that first. The computer would run the recovery, and then would go to the black background "Welcome to Microsoft Windows" screen with a little 'please wait' under the windows logo flag, and when it would go to the next screen (which would presumably be the beginnings of the start-up area) it would get a black screen with a cursor in the upper left side. (You can't type anything with the cursor, however). So I got in an online chat with HP who said that it sounded like the recover partition had been corrupted and that if I had not made a set of recovery CDs then I needed to order them and run the recovery from the Cds. So I did just that yesterday. The same thing happens. I get to the first start-up screen (black background with Microsoft 'flag' and a 'please wait') and when it goes to the next screen it's a black background with a cursor in the upper left. What is wrong with this computer.
i have windows xp home with sp2, my computer is a Dell 5000 with pentium 4. i have 3 administrator accounts. my problem is logging off. i cannot log off from any of the accounts, i can switch off or switch user but not log off. if i try to log off it goes as far as a black screen and then nothing, i can't use the task manager. the only way i can then do anything is to unplug the pc from the mains and start again.
I have 65 Computers need to format and install new window for the deployment this weekend. But unfortunately, 3 of these computers cant format and install new windows using installation cd. It can detect and boot from cd but when I hit any key botton to boot from cd after a minute the installation screen turn black then stop installation but the machine is still up.
I think I need to change my operating system! I have a Compaq Armada E500 laptop, 4GB, 2.81 GB of used space, 1.18 GB of free space, running on "Windows 2000 Professional" ("Built on NT technology"). I'm having problems downloading certain softwares, it seems "Windows 2000 Professional" just doesn't let me do it. Plus, I've found there's other things I just can't do with it. I've been told Windows 98 is the best way to go for me + it'll free up some more space (you can see my laptop has very little space) + it'll let me download the softwares I need with no problem.
I have an old dell that had windows ME on it (yuck) About 3 years ago, I upgraded to XP and installed service pack 2. Since then I have set up 2 laptops, broadband and a wireless network. But the old dell in the office (the main one that the high speed modem and linksys is plugged into) needs to have the operating system re-installed again. It has reached its half life...a nuisance, a pain, unbearable, unusable! When I tried to re-install it wouldnt let me because the version on the computer is a newer version then the one on the disk.
I bought a new desktop, 3 yrs ago, with Windows XP Pro installed from the factory, and of course it was an OEM version, as usual.The com has a MSI Intel 848P Neo Mother board which I have changed 2 times before on warranty. Now I had to change it again, due to one PCI slot was dead. So far everything was ok.But, to activate the OS was now a "plenty big" problem.
Somehow the technician managed to do it at his own place. Suddenly, I was going to download a plug-in program to my Microsoft Publisher 2002, of course validation was required. No problem - I had done that several times during the last 3 yeras and everything has been ok. But not this time. Validation failed, Microsoft announced. "The Office XP Pro has to be activated, start any Office program, go to Help activate product" - No problem, easy job.
I was able to get XP installed using my CD with a only a couple of little hiccups that I got past. Now, I'm trying to change the serial number to his via the sticker on the bottom per the instructions at MS Q328874. I don't know if the problem is that my CD is an upgrade CD instead of a full install or if it's that the solution only applies to volume licensing. Does anyone know if I need to activate the current serial number before changing it to the correct number? Or will it not work at all since mine is the upgrade version?
I have been trying to clen up an old computer to give away. It is a 2002-vintage desktop with 512MB ram. I tried several times to reformat and reinstall xp, but I have only succeeded in removing the operating system and reformating both the hard drives. I have the OEM xp disk that came with it but I have tried 15 times to install xp and I can't. Is there anything I can do to fix this?
I have WindowsXP Home with SP2 which i access via automatic logon. I now have a possible need to go back to using my password to logon.I may have forgotten the exact password. Is there a way that i can test for my password without losing my automatic logon?
ive been trying to reinstall windows on my pc, it will do everything fine until it starts to instal, it will get to about 50% threw the devices then it wont do annything after that, ive tryed everything i can think of to undo the installation but cant get it to work, is there something if missed for it to install correctly? if not can you tell me how to undo the new installation as its useless at the moment
I changed administrator accounts on XP Media and made the original administrator a limited account. when I the restarted the computer and choose the new administrator account it starts to load then seems to freeze on configering Internet Exp 6.Is there a way to wipe out the new adm account and change the limited account I created back to the administrator.
I have some minor glitches in my system. I've been thinking about reformating the HD and reinstalling XP Pro. 2 questions: 1st is; if I back up my HD and then do a restore after reinstalling the os, won't I just restore the glitches I'm trying to get rid of? 2nd question; Since I've never done a reinstall and restore; will all my programs be restored just as if they have been installed (Drivers, programs, etc.); or do I have to reinstall all my programs and then do a restore so I get all the data that changed after they were installed?
My friend gave me a Dell Latitude Laptop, Windows XP O/S to look at. It is a couple years old and was given to him by his old company which went out of business. He has not used it until recently and was unable to get into it due to a network password screen. I accessed it with ''admin'' as a username and no password. I cannot change the "users" information or disable the password because I have no "administrator" rights and don't kow the password for the administrator. I tried the default blank password trick. Once in, I noticed network software installed and I cannot access the internet with my ethernet cable. Basically, I am just trying to get it where he can use it around the house. Is there a way to disable the company installed networks, or make them go away completely? I have no XP O/S on disk, so I am trying to avoid a complete format. If I can just get the machine back to the basic XP O/S it would be good to go.
im installing xp on my uncles computer, right now...pluged everything in but i forgot the keyboard i plugged in was dead,so i restarted with working keyboard and now its stuck....on.... "Verifying DMI pool data........." and not doing anything..
After thinking my computer was running well I made a restore point to that effect, after defragging and using check disc. I continued using my computer and a couple of times rebooted without problems after installing windows updates. The next morning when booting up I was completely locked out at the welcome page, asking me to validate my copy of Windows. This I did over 4 years ago, and would have ticked the box to say yes, unfortunately the mouse locked.
I have put another copy of XP onto my D: drive to get here and write this, but with only 25 days for activation, which I do not want. Has anybody any idea please what has happened. I do have back-ups but they would only work if I reformatted my C: drive which is a lot of bother. I have tried starting in safe mode, last good known configuration, but it always locks at the welcome screen.
I have a legal copy of XP which has been registered. There are 92 updates that will not install. I isolated KB892130 as the validation tool that will not validate with Microsoft before the other updates can be installed. I have turned off Avast (antivirus), but did not disable it. I have a laptop with Avast on it which has updated perfectly. I have forced validation from DOS but this still doesn't let the updates go ahead
I'm trying to fix my friends Hp and I usually know what im doing. But here I have no idea what to do. I tried going into the bios to change the boot order to cd to format and I can't. Can anyone tell me what to do.I changed out his hard drive with mine and it does nothing. just posts and goes to a black screen instead of trying to boot and blue screening as it usually do when you change hardrives between two computers.Changed the Ide cables no luck.
I have this problem where I was not able to send or receive using Microsoft Fax (for WinXP and 2000). I'm using a GPRS modem which I have got working for other fax softwares like Symantec and MightyFax. I was able to establish a connection but was not able to send or receive. I can hear the ringing sound from the remote fax machine I was dialing but no fax was received there. Error message is "An error occurred while sending/receiving fax". For Win2000, I was only able to send but even then, the fax was not clear.
