ICQ Lite Advertisment Disable
Aug 11, 2003
this is for the new icq lite currently Build #1253. This will disable advertisment display but, unfortunatly will leave the place holders for the advertisments. Atleast you don't have to stare at those annoying flash advertisments.
1) Open up windows explorer and navigate to the folder you installed icqlite*ie. c:ProgramFilesICQLite
2) Right-click on the folder and chose properties
3) In the properties dialog choose the security tab*note: you may have to enable advanced security to view this tab on some versions of windows
4) In the security tab remove all permissions except for the system and set the system permissions to deny all access for read, write, etc.. for this folder*note: you must have admin right to the machine in most cases and also may need to disable permission inhertince from parent under the advanced tab
5) Apply the changes and restart icq
What you have just done is denied Icq access to its temporary folder where it stores the advertisment information and now advertisments will not be displayed. This will work with any icq version as long as you can find the folder where it saves its advertisment info.
View 9 Replies
ADVERTISEMENT
May 26, 2004
if there is a password on kazaa lite(may work with regular version too) blocking you from anything just run regedit and go to this key: HKEY_CURRENT_USER SoftwarekazaaResultsFilter and any thing thing that you dont want a filter on just double click on and set the value to 0.
View 9 Replies
View Related
Dec 18, 2004
Why doesn't kazza Lite K++ connect?
View 4 Replies
View Related
Jul 31, 2005
I've tried googling, I've tried driver-guide and I tried just about every place I can think of but for the
life of me, I just cannot seem to install this CDRom in WinXp SP2. Every time the computer reboots it finds this new hardware and cannot find the drivers anywhere! Internet or on my computer.It just can't find them. I've gone to Lite-On Site but with no luck. I would just toss this piece of out the window and just get a new one but the fact that it finds it tells me that it does works. My DVD-ROM has no problem.
View 6 Replies
View Related
May 7, 2007
I slap one together then install windows without a hitch.then I toss in the mobo driver disk and the system hard locks can't even get to the task manager. A few disks and reboots later, the same stuff is happening.I check the device manager and not only is the drive not showing up as a problem, but it's recognizing it as the proper model. So then I go and set the region code (because I had an issue before with a drive not reading before I set a region).still same problem.Like I said above, I'm building 2 of the same systems.so I took the other drive and plopped it in. SAME FRIKEN THING.I'm kind of stuck because I can't update stuff without the cd rom drive (I guess I could use a small usb thumbdrive)and the drivers on that disk enable the onboard lan, so I can't even check windows update.so I use my thumbdrive and install the latest forceware, including the ide drivers.
View 6 Replies
View Related
Aug 12, 2002
I've noticed a lot of tweaks involving the removal of ads using this program. I found this version on the net that is tweaked so that the only thing you can do with it is all you ever do with it: search, download, etc.you can find this version here: http://www.refosearch.tkthis version also allows results > 128kbit
View 9 Replies
View Related
Apr 2, 2005
How can I disable incoming pings (without a firewall)? Whenever ping.exe in %systemroot%system32 is renamed a new copy is made when someone attempts to ping. Are there other files that need moving/renaming?
View 12 Replies
View Related
Aug 21, 2006
how do i disable this firewall to use my own
View 3 Replies
View Related
Apr 18, 2010
How to Configure Windows to Open .html documents in New Browser! Disabled Windows IE....html doc's now opens in Notepad.
View 2 Replies
View Related
Jun 26, 2006
Im trying to remove IE priveledges for 1 limited user account for an XP home machine; but still have other user accounts have permission to access the browser. This is a workgroup enviroment. Right now; it appears by editing group policies; I can disable IE for ALL users or enable for ALL users, but can't select who can have it and who cannot
View 2 Replies
View Related
Feb 14, 2005
I want to connect to the internet but the network card won't work. when i right click and choose repair. it says can't repair TCP/IP is disabled. The problem started when we wanted to connect another computer and changed some settings now i can't figure out wat to do. I called the Cable ISP they say that something is wrong witht the settings of computer of network card.
View 4 Replies
View Related
May 18, 2005
I have attached a copy of my HJT. Would really appreciate if it can be run through to see if there is anything that I can disable in my start up. The computer that I am using is being shared and I have become concerned over some stuffs. In Service Pack 2, a firewall is included right? Now there is this Zone Alarm downloaded too a few months ago. Is that a firewall program? There is also a Norton Personal Firewall that comes with the PC I know that the anti virus has expired but this firewall thing is still working right? At times like this, I wished I have more knowledge on computers but lucky me.I have you Guys at Tech Support to enlighten.
View 14 Replies
View Related
Aug 26, 2005
Here are the startups of my comp. Which would I remove?
View 7 Replies
View Related
Mar 6, 2008
Can't install the fax service on it.I go to Add/Remove Programs - Add Windows Components and select the fax service. It appears to install and the Fax even appears in Printers and Faxes for about 1 second, then vanishes.Has anyone else experienced this?More info:There is an Epson Stylus DX9400F all-in-one installed. Don't know if that is the reason for not being able to install the fax?
View 8 Replies
View Related
Aug 27, 2005
I only have one account on my Windows XP computer, and have guest account disabled. Yet, every time I turn on my computer, I am greeted with the choice of what account to login to, even though there is only one. Am I missing something?
I even tried disabling the welcome screen, and I still get asked to login first.
I have Windows XP Media Center Edition 2005.
And no, I do not have a password enabled on the account.
View 6 Replies
View Related
Nov 11, 2009
I have become quite irritated by the various strange noises which happen at a "system event". I have found the dialogue box where additional events can be added to the sounds but I cannot see how to turn off the ones already there. I do not want to use "mute all" on the volume control as I frequently listen to music.
Any suggestions welcome.
While in that area of the screen, I want to remove some of the icons. The dialogue box is set to "always hide" the offending Icons but they are still showing.
View 4 Replies
View Related
Feb 16, 2007
Hi everyone i want to know how to change the size of this bar i did it once but i dont remember.And i also want to know how to disable the TICK sound when u enter a folder
View 1 Replies
View Related
Dec 8, 2007
I wanted to disable a cookie on my Windows XP computer that came from a certain web site. Specifically how would I go about doing this.
View 4 Replies
View Related
May 12, 2005
When I Turn The System On It Asks Me For A Username And Password Ive Tryed To Diable This But There Is No Op To Do This.
View 5 Replies
View Related
Sep 4, 2005
I'm trying to connect from my desktop to my laptop using RDC. They are both on my home network. When I RDC into my laptop, I get the login screen as I expected, login, and I'm in.for about two seconds. After that, the connection hangs and eventually RDC drops me
When I log into the laptop itself, the wireless connection icon in the bottom right shows "acquireing network address" for a second, finds it, and then the laptop is on the network again. I'm assuming that when I do RDC into the laptop and the desktop takes over, the network adapter on the laptop thinks it's time to sleep or disable, and drops off the lan. I confirmed this by doing a ping fromthe desktop to the laptop. Before RDC, no problem. After the RDC connection hands, I can't ping the laptop anymore. Once I log into the laptop itself, I can ping the laptop from the desktop
View 1 Replies
View Related
Aug 5, 2005
Lots of schools need to run one desktop for all users. Not a standard default user template. But to actually disable user profiles like you could in windows 98. With 2600 users xp takes to long to login when it has to create a profile each time because we use a security program that freezes the desktop and dismisses any changes to the c: once rebooted.Does anyone know of a way to disable user profiles or assign a profile where
everyone uses it and a new local one is not created
View 4 Replies
View Related
May 23, 2010
Running XP on a HP/Compaq NC6000. Had a page from HP site bookmarked that told what registry key to modify. HP has removed the thread, can't find the answer elsewhere. Ideas appreciated. I've seen posts for other models directing user to enter BIOS to change but unable to get into it. The registry key modification worked earlier.
View 4 Replies
View Related
Aug 5, 2005
I need to disable or turn off the windows firewall (XP pro SP2) but the button in the firewall console is light grey. In other words, I can not turn it off.
View 3 Replies
View Related
Nov 30, 2007
Searches on how to disable screensaver all point to going to "display properties' and choose none. I have over and over and it continues to come back. Anyone know how to stop it?
View 1 Replies
View Related
Mar 31, 2010
I want to disable gpedit.msc in my windows xp prof. please send me the ans as soon as possible.
View 1 Replies
View Related
Jan 10, 2008
I want to disable or remove certain commands or functions in Windows XP ("Run" and "Regedit") to stop my 15-year old son from hacking around or disabling the parental control software that I have installed.
View 2 Replies
View Related
Mar 4, 2005
how I can turn the debugger off or disable it. I am wanting to convert a video from one format to another and keep getting a message to turn debugger off. But can't find how to do it.
View 3 Replies
View Related
Apr 10, 2005
I want to get rid of whatever is causing my computer to act like it's firewalled.I'm currently studying in Japan and have ADSL in the dorms. It seemed to be firewalled, but no one else I asked really knew much about it, so I just kind of accepted it and moved on. But recently one of my friends in Tokyo has gotten a new internet connection, which her computer works perfectly on and gets amazing speed. But when I connect, it still seems I am firewalled. Using PC Flank's scanner pcflank.com all my ports are stealthed while hers are closed.
View 12 Replies
View Related
Aug 26, 2009
I have Lenovo Thinkpad T60 and i just installed [COLOR=blue ! important][COLOR=blue ! important]Windows [COLOR=blue ! important]XP[/COLOR][/COLOR][/COLOR] that i get from Lenovo factory, and every time i log in XP i need to press CTRL+ALT+DELETE and after that it ask my finger and password, how i can disable that CTRL+ALT+DELETE asking? I just want to sing by my fingerprint without need to press CTRL+ALT+DELETE every time
View 1 Replies
View Related
Aug 26, 2009
I have Lenovo Thinkpad T60 and i just installed Windows XP that i get from Lenovo factory, and every time i log in XP i need to press CTRL+ALT+DELETE and after that it ask my finger and password, how i can disable that CTRL+ALT+DELETE asking? I just want to sing by my fingerprint without need to press CTRL+ALT+DELETE every time
View 1 Replies
View Related
Apr 19, 2006
Is there a Group Policy in Windows that will disable the Windows games in Windows XP & 2kpro. I don't want to uninstall them. The company that I work for is putting their foot down internet use and game play.
View 4 Replies
View Related