I am getting frequent system related errors in my Event Viewer. Typically those are related to system crashes. Here are four for starters. It is almost impossible to avoid some crashes on a daily basis. I find the M$ help over my head. Where to start?
View 2 RepliesI'm having some intermittent computer problems. Sometimes I get programs that all of a sudden "wont respond" and have to end them and then usually restart to use again, like my MSN explorer and occasionally word or excel. Also I'm occasionally having an issue where my wireless adapter all of a sudden won't recieve any signals. There are several wireless networks in my area and all of a sudden it can't see any of them including my own.
View 1 Replies View RelatedI've got a couple of error messages and warnings found in my Events Viewer that I don't really understand and want to get rid of it...If anyone could help, it'll be greatly appreciated.First is in my Application : Lots and lots of warnings about my MS iInstaller.Reads
View 1 Replies View RelatedRecently i noticed that windows event viewer shows this error:"AMLI: ACPI BIOS is attempting to create an illegal memory OpRegion, starting at address 0x0, with a length of 0x1000. This region lies in the Operating system's protected memory address range (0x0 - 0x9f800). This could lead to system instability. Please contact your system vendor for technical assistance." I start getting this message every 10-15 minutes while playing 3D games like Left 4 dead. My system hangs or restarts from time to time (while idle or is booting). I have tested my pc with prime95, furmark, memtest, other burn-in applications. No crashes, everything looks stable.
View 1 Replies View RelatedDoes anyone know why my computer beeps occasionally while it's turned on? The beeps do not come from the speakers, but from the computer itself and happens when I surf the net or check my e-mail or if I'm not doing anything at all.This couldn't be connected to the errors I get from my Event Viewer...could it? BTW...is there a way to fix Event Viewer errors?
View 9 Replies View RelatedWhat is the method for finding which process is responsible for my XP sp2 system hanging (event viewer show no errors)? System hangs while I'm using various programs (Outlook, FireFox, IE and Quickbooks primarily). I've done driver updating and trying to narrow it down but am at a loss.
View 1 Replies View RelatedI've looked at it infrequently, and never could understand what I saw, but today there was something relatively new and scary:...Further info under help and support said an error was detected during a paging file operation. The word "disk" scared me, so I checked the entire Event Viewer, and found 25 of these errors, from Aug 1 2005 through Sep 3 2005. If this event was cataloged earlier, I don't know, because the Event Viewer only goes back to Aug 1. I checked System Restore for Aug 1, 2005 and found a couple of things; 1) an accidental MS "update" to NVIDIA GeForce4 MX driver 5.12 -- but we've had the 6.1.7.7 driver for a long time now. The 5.12 screws up the display resolution, big time. I reinstalled the 6.17; resolution is fine; but I'm wondering if this could have something to do with the Event 51 warning. Also, on that same date, something called Software Distribution Service 2.0 is listed three times, and I don't know why. I don't even know what it is. I've researched the web, and can't find anything that seems to apply -- other than potential for a hard drive crash. Just what I don't need. Meanwhile, the entire system is working extremely well; fast and smooth; no glitches or twitches that I can detect
View 8 Replies View RelatedWhenever I try to view the Log, I get the top screen with the three optons, but I only get the bottom screen no-matter which of the three I click on, is it corrupt or something? Why can't I get the Event Log to come up?
View 6 Replies View RelatedI have windows xp pro and this is the first time i ever try this I when to the administrative tools >> Event Viewer >> Services and this error Can someone please explain what it is and how to correct whatever it is ?DetailsProduct: Windows Operating System ID: 10000 source: DCOM Version: 5.0 Component: System Event Log Symbolic Name: EVENT_RPCSS_CREATEPROCESS_FAILURE Message: Unable to start a DCOM Server: %3. The error:"%%%2"
View 6 Replies View RelatedI'm having "Stop Errors" and frequent shut downs that I can't resolve
View 13 Replies View RelatedWhen I look in my Events Viewer I see countless warnings for which the source is Dhcp. Others(but many fewer) have Win 32 k as the source. Others just say "print" as the source and 6161 as the category.
View 3 Replies View Relatedwhen you open Event Viewer and click on System, you will see a list of information like the time you last shut down the computer. (here's a screenshot of what it should like: http://www.addictivetips.com/wp content/uploads/2008/11/shutdowninformation.png) What I want to ask is how do you delete this information??
View 7 Replies View RelatedI cannot read properly my security section of the event viewer anymore. The description of an item is now like the following: "The description for Event ID (538) in Source (Security) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: IUSR_<myUser>, KIP, (0x0,0x5229A9), 3." Moreover, the category are now filled with numbers. I found on the web that the reason is probably due to some loss of permissions. i checked the .evt files and my user has full control over them.
Is there something else to check?
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID {BC866CF2-5486-41F7-B46B-9AA49CF3EBB1}
to the user NT AUTHORITYNETWORK SERVICE SID (S-1-5-20). This security permission can be modified using the Component Services administrative tool.
recently i've been getting a lot of bsod's involving win32k.sys and i81xdnt5.dll. when my computer restarts it enters two errors in the event logs. are these related to the bsod's? my os is winxp sp2.
View 13 Replies View RelatedI have 2k3 server R2 and about 30 machines that are xp sp2.Some of my xp machines, not checked them all, have a dnsapi error where they cannot update their record on the dns server (10.1.1.1) but that server does not exist. They get their net settings from dhcp, the dns server is set there correctly.
View 2 Replies View RelatedI am running Win XP with SP3. My start-up is slow and I have run virus and spyware tests so decided to download Event Log Explorer to see if it would identify the problem. Have just run it for the first time and it found loads of Errors and warnings. Sadly I have no idea what they mean. They refer to programmes I have never heard of and can't find on my computer.
View 8 Replies View RelatedIf someone could help this would be greatly appreciated. This is driving me CRAZY! Now the situation is that I get a BSOD Memory dump error then the comptuer restarts.. Now my comptuer is a Compaq B3800 laptop and I re installed the software however to no avail . It seems the computer only crashes at home and when at work or at a friends house it neve crashes. Could this be the wireless router?
View 1 Replies View RelatedWhile viewing video files (contained in folders with over a Gig of contents) this message pops up in a small window: Windows Explorer has encountered a problem and has to close. You can send an Error Report to Microsoft. Then things close down, but everything comes back, except the folder of files that was open before.Then if I go to my "Event Veiwer" under Application I get the 2 Error lines with "event ID 1000 and 1001.
View 2 Replies View RelatedI just sent a fax & when I tried to view it, fax console opened adobe photoshop instead of fax viewer. I installed adobe a few months ago & this is the 1st fax I have sent since then. APS is not clear & I don't like it for this function. I prefer windows FV. How do I restore the viewer to its original target (FV)?
View 12 Replies View RelatedA couple of days ago my laptop (IBM Thinkpad) began to frequently crash and lock up on me. Ctrl Alt Del would not unfreeze anything so i was forced to just turn it off by holding in the power button. After i would do that I would try to turn the computer back on but then it would stop before the normal startup began and give me the error message of"Resource Conflict - PCI Network Controller in slot 01Bus: 02, Device : 02, Function : 00" My computer runs Windows XP home edition and has service pack 2 installed. I have an Intel pentium M processor 1300MHz598MHz and 512 MB of RAM.
View 8 Replies View Relatedwhen i open a folder e.g. My Documents, My Computer... a little while later i get this message...and yeah, so i press 'Don't Send' most of the time then after that i can't minimize my browsers and other windows by pressing the task bar, i had to press the minimize button on the window T__T. i have selected the 'Send Error Report' and the 'Debug' option before but i have no idea what's really happening after that...
View 14 Replies View RelatedI'm using a different computer, than my not working one to post this. My other computer has frequent crashes like when i click certain things. It says beginning dump of physical memory in a blue screen and counts up from 1 at the bottom of the screen. It takes forever so i Just restart the computer. I downloaded and installed a BIOS update, tried a different graphics card, tried different RAM chips, tried a different processor, and it still happens.
View 10 Replies View RelatedWithin the past 2 or 3 days, I've been getting BSODs 3 times a day. They seem to always happen when I'm randomly surfing on Firefox, but I thought this belonged here. They seem to happen after I've recovered the computer from standby mode (I make it go to sleep instead of shutting down and rebooting most of the time) and am surfing firefox. I've noticed that I can do all I want with no problems before sending the computer into standby, but after standby I'm on borrowed time. Maybe I'm forgetting a time that it has shut down on me after a fresh boot, but that seems true.
View 14 Replies View RelatedWhen I start the computer, I get a screen freeze and have to press Ctrl,Alt,Del once before any programs will startup. A lot of probs with internet connection and slowness while surfing as well as a lot of pop up ads in my face.
There are system boxes coming up with registry and dll errors and the whole system seems SLOW.
The family computer is playing up and to the best of my knowledge the computer in question just simply suddenly stopped working as it should. I am unable to get the 'default' welcome screen upon start up and am getting the logon box where you type in a username and passworld. I know how to get rid of this, user accounts>enable welcome screen - but it will not solve the problem.This is just the start of the problems. I get a whole host of errors which popup one after another.
View 4 Replies View RelatedI am being shown "script error","page error, you may need to change browser
settings",and "behind firewall" when I try and send files and photos. I've
tried everything I know to fix this, but I still see these errors and still
cannot send photos while I'm online.
I notices there more than 20+ informations in the security event log once I turn on the computer. Most of them is successful logon/logoff. What exactly is logging on and off?? Or what services is logging on and off??? The reason is I have another computer running XP Professional, and and the same setting as this one (only one user "Computer Administrator"), and the security event log in my XP Pro system is clean, no informations whatsoever. How can I find out who or what services is doing logon/logoff during system boot up. Basically I would like to eliminate those services and have a clean security event log
View 2 Replies View RelatedA few of our DNS servers are reporting Event ID 3000 periodically. Full logging is on. There are no failure entries prior to the event. I can not find much on TechNet either. I see that this is a problem for others in other forums, but I could not find a resolution on any site. Anyone have a cause and resolution? Details of the error entry:
Event Type:Warning
Event Source:DNS
Event Category:None
Event ID:3000
Date:3/13/2006
Time:6:21:05 AM
User:N/A
Computer:domain controller (changed name)
Description:
The DNS server has encountered numerous run-time events. To determine the initial cause of these run-time events, examine the DNS server event log entries that precede this event. To prevent the DNS server from filling the event log too quickly, subsequent events with Event IDs higher than 3000 will be suppressed until events are no longer being generated at a high rate.
I have a Server 2003 SP 2 DC acting as a print server. It seems to be causing our XP SP2 clients to produce an event ID 20 print warning everytime they try to print as if the driver has changed even though it has not.
View 2 Replies View RelatedI have recently begun to receive warnings in my applications event log that I do not understand. They always come in pairs, Event ID #1001 and #1004, and they always occur three times in rapid succession, but seem to have no apparent effect on my system.
View 2 Replies View Related