File System RAW
Aug 31, 2008
I've deleted, created anew and formatted one of the logical partitions on my drive (a former NTFS partition) to FAT32 using Partition Magic 8.05. Now, in Partition Magic it says that this drive is now FAT32. But windoze reports that it is RAW.
View 12 Replies
ADVERTISEMENT
Apr 16, 2005
I have a user with a home driectory that has created a folder with mutliple folders within it. I am not sure how far the direcroty goes, but I have counted to at least 26 directories deep. I cannot delete the parent folder in either explorer, or from the prompt. At the prompt I have tried RD foldername and it says, "Folder not empty". Tried del foldername*.* with no error and still cannot delete it.
View 6 Replies
View Related
Oct 14, 2007
The system can be restored by using the Startup CD and pressing R for recover, but I do not have any cd. The only one I have it the recover cd, but it is my understanding that if I use the recovery cd that I will erase everything from my computer and I can not do this.I tried to read the other threads about the same problem, but to be honest I do not understand them and I just do not have the startup cd - maybe it is the same as the recovery cd?
View 9 Replies
View Related
Dec 15, 2008
When I start the laptop, the first black screen loads, and then directly skips to an error message saying "Windows cannot start because the Windows/system32/ config/system file is either corrupt or missing." Then it prompts you to try to load Windows using the installation CD.which I do not have! Whoever's reading this, PLEASE please help me, the laptop's like, my life, and I haven't had the common sense to back up anything
View 12 Replies
View Related
Jan 14, 2006
I tried to start my computer and I suddenly received the following message:"Windows 2000 could not start because the following file is missing or corrupt: WINNT/ SYSTEM32/CONFIG/SYSTEMced startup options for Windows, press F8." I'm not sure how to fix this problem. I have tried to press F8 --but nothing happens. I'm afraid a virus has destroyed the data on my hard drive.
View 6 Replies
View Related
Jan 3, 2008
"Windows could not start because the following file is missing or corrupt: c:windowssystem32configsystem. You can attempt to repair this file by starting Windows Setup using the original CD-ROM. Select 'r' at the first screen to start repair." The problem is that I purchased my PC 6 years ago from a retailer fully loaded and I received NO discs with it. Since I don't have the original CD-ROM, can I burn the files onto another CD from a website? Does anyone know which files I need? My PC is an HP multi media center 873n running XP home.
View 2 Replies
View Related
Feb 4, 2005
So my sister gets hold of a computer in the house and ruins it, and here is the dilemma I am facing: I turn on the computer and right away i come to this message....
Windows could not start because the following file is missing or corrupt:
windowssystem32configSYSTEM
Attempt to repair this file by starting Windows Setup using the Original CD-ROM. Select 'r' at the first screen to start repair.
So I enter the cd rom and press 'r' for repair, I choose C:windows, however before it can begin to repair it asks me for an 'Administration Password' which I have no idea of after many attempts.
I do not want to have to format the pc since I have some very important files on it. Any help is appreciated.
View 6 Replies
View Related
Oct 15, 2008
I have Windows XP 64-bit Edition installed. I have here a .exe file that I need to run in command prompt. When I run it it says it is for another machine type. I understand that this means it's for 32-bit Windows. I'm wondering if there are any ways to work around this and make this executable work.
View 3 Replies
View Related
May 23, 2008
When trying to run my Iomega backup, I receive an error on a file: "The system cannot find the file".When trying to delete this file, I receive the message "Cannot delete file: cannot read from the source file or disk".The file has 0 bytes and is not in use it is not marked read only.
View 2 Replies
View Related
Oct 28, 2005
I have started getting the following message in my event viewer: Event ID 7000 Service Control Manager The SVKP service failed to start.
The system cannot find the file specified. I did a search for SVKP on the services displayed via Sysinfo and got the following result:
??windows Kernal Driver State=stopped I did a full search for SVKP on my hard drive but came up with nothing
View 8 Replies
View Related
May 9, 2006
I bought a new PC (win XP) made a CD from my win 98 PC with a lot of files that I want to transfer to this PC. I get a message saying cd cannot be read because UDF file is missing. Anywhere to find this file? also get: "error loading setupx.dll" module could not be found.
View 14 Replies
View Related
Jan 29, 2005
Cannot run msconfig, but can locate the file on the computer.
View 6 Replies
View Related
Nov 2, 2008
"GetLastError()=2: The system cannot find the file specified"
This is the error message I get when trying to uninstall a program (corel painter). I can't even access the program. When I do I get a "R6002 floating point cannot be loaded error."
View 2 Replies
View Related
Jun 28, 2005
I have a PC with XP sp2 home addition. there are some corrupt files due to a virus (cleaned now). When I try to either reinstall or deinstall Windows XP sp2 I receive the "the system cannot find the file specified" error. I extracted the sp2 .exe file and run the update.exe file and get the same error. I tried to look at the event viewer, but, it is corrupt as well
View 5 Replies
View Related
Jun 18, 2007
I want to know did windows XP or any other version of windows manages log files to store system information like Hwd address or infomation about hwd ware address.(ipconfig and msinfo32.exe i know about i tell me log file in readable format ).Tell me like in linux Os log file and system files mantained like that Windows Os also manages.I want to know proper place where windows store them and r they in readable form
View 4 Replies
View Related
Jan 21, 2009
My OS is windowXP pro sp2. My hard disk has two partitions c: and D:. they are all in NTFS file-system. Now I want to change D: into Fat32 file-system
View 8 Replies
View Related
Sep 10, 2005
Any strong views on the advisability of converting a FAT32 drive to NTFS, after upgrading from Win98se to WinXP Pro? And perhaps a word on the best and safest method to use if implementing this
View 3 Replies
View Related
Dec 25, 2007
It's a shame that me did a grave error. I am in terrible shock for that I did the following:
a) Installed Sun Solaris Express x86 Developer Edition with a 7.5 GB partition.
b) There is Windows XP SP2 on the first 20 GB partition.
I wanted to toggle boot flag by using DOS based fdisk after the Solaris installation. That's where me screwed up I ran a bootable Russian language DOS tools. Instead of toggling the boot flag (option 2 in the fdisk), me accidentally (while taking an overseas call) selected (option 1) the FAT formatting the existing NTFS partition (fdisk ran for 1%, then me immediately stopped and rebooted. But, already damage done My NTFS got screwed up by me.....
View 10 Replies
View Related
Jun 29, 2005
I don't know how this happened. But when I went to my D drive which is My Documents, the drive was empty. Though when I check the drive properties it shows that 18G is being used, plus it's showing that the file system is RAW. Not sure how it got that way because it should be NTFS. I am able to view My Pictures and My Music by viewing from the start menu and going to My Pictures or My Music, but when I go to My Documents it's empty.
Now my question is how do I recover those missing files? I'm assuming that they are around because My Pictures and My Music are two of the files that are in my documents folder. This just leaves 25% of the drive I can't view. I can't do system restore because I don't have the D drive being monitored, so I can't do that. I did a virus scan and a spyware scan and the system is clean. Another thing I noticed is if I try to save something to the D drive it will appear to be the only item on the drive, but when I click refresh it will vanish.
View 8 Replies
View Related
Feb 26, 2010
Will system restore restore a deleted windows.exe file?
View 1 Replies
View Related
Sep 24, 2008
My CD ROM/DVD player recently stopped working on my Omitech computer. From My Computer - I can't see the drive anymore. In the device manager - it has a yellow exclamation mark on it. I tried updating the driver but the message was that the software was already the best match. I tried uninstalling and reinstalling but it says a file is missing or corrupt. I bought a new external CD ROM - but have the exact same problem with it. I went to Run and put in sfc /scannow and there were problems that maybe could be fixed - if only it could read the XP CD - then it could fix the CD ROM. But it can't read the CD because of the problem with the CD ROM. (a whole in my bucket story.) So - how can I fix the problem if it wants a CD to fix the problem but the CD ROM is not working to read the CD?
View 3 Replies
View Related
Jan 24, 2009
Would someone please help me if possible,to resolve these problems and why these problem occurred.I've got blue page three times before these problems occurred.windows xp home sp3 1-right click on drive c and selecting check disk ,enter: check disk was unable to complete the disk check.2-type chkdsk c: x f
in command prompt and restart...this message:the type of file system is raw.check disk is not available for raw drives. 3-disk management shows drive c healthy and with the FAT32 file system structure.
4-type chkdsk c: in command prompt...enter:the type of file system is FAT32....windows find errors in file system.
View 13 Replies
View Related
Feb 3, 2006
Trying to help upgrade my hard drive. I have a Local C drive 20 GB and I have a Maxtor 120 GB in my E: drive. I have previously sent an exact image copy of my C drive to my E: drive using Norton's ghost 9.0 symantec. Since he has tinkered with my Hard drive it is not even recognizing a file system at all. It asks if I want to format the drive and I know that will wipe it out completely if I do that. The exact warning or prompt that shows goes as follows. The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and the volume is not corrupted. I run windows XP home edition and my computer is a pentium 3 300 SE by gateway.
View 20 Replies
View Related
Jan 22, 2007
I get an error message that the WINDOWSSYSTEM32CONFIGSYSTEM file is "missing or corrupt". How do I repair this. I can only boot off the CD and either do a repair/reinstall or DOS repair.
View 6 Replies
View Related
Dec 25, 2006
isass.exe what is this and will it hurt my system and if so what should I do
View 12 Replies
View Related
Mar 10, 2005
On startup this computer Windows (XP Pro) will not start because the file WINDOWSSYSTEM32CONFIGSYSTEM is missing or corrupt. Is there a way to replace this file?
View 14 Replies
View Related
Sep 7, 2005
Hi my problem is i can't view system32, cant find it anyware, cant explore to it or anything.
View 8 Replies
View Related
Aug 12, 2002
I wrote this Guide on disabling System File Checker in Windows XP Professional. Sorry it's not in text form. You guys want it simple so anyone could do it, what could be simpler than looking at pictures (besides a program that will do it for you, which I've thought about...).http://www.overclockersclub.com/disablesystemfilechecker.shtmlContact: ProfessorXP@Yahoo.Com
View 9 Replies
View Related
Oct 7, 2009
when I start my ms outlook 2007 I get this error. "Errors have been detected in the file 'file_path'. Quit all mail-enabled applications, and then use the Inbox Repair Tool." I tried to scan with scanpst.exe but it went in vain.I tried it with other applications it worked fine.But,the problem is they all are demo versions and I gets back only 5 to 6 mails for more mails i have to buy that applications. Do we have any free tool that can fix my problem or any other way to fix this.
View 2 Replies
View Related
Oct 28, 2008
I am having problems being able to install updates from microsoft. I uninstalled SP3 and when trying to reinstall, I get the "The system cannot find the file specified" message. This message also occurs when starting Excel, Outlook, Powerpoint etc.I tried renaming SoftwareDistribution folder & deleting contents but to no avail. I tried manual download in safemode but same error.
View 11 Replies
View Related
Jul 12, 2005
Trying to dowload and open a pattern book I bought online,everytime I try to
open,it says C:WINDOWSSYSTEM32AUTOEXEC.NT.
The system file is not suitable for running MS-DOS and microsoft
applications.Choose close to terminate.I run Windows XP.
View 4 Replies
View Related