I am trying to figure out if it is possible to export wireless settings for a WPA/PEAP/EAP-MSCHAP v2 network. I tried using the Wireless Network Setup Wizard, but it doesn't copy the PEAP information or the certificates. Is there a way to do this?
View 2 RepliesOur wireless infrastructure is always changing and evolving so I was thinking on creating some kind of GPO that can be pushed to laptops and configure wireless settings that way. Is there a registry key that can be exported (from already configured laptop) that will contain all wireless settings? We have 2 different profiles we use through Windows Zero on XP SP2. This registry should have everything in there (ssid, keys, encryption, RADIUS and other possible settings for wireless)Please help. It is a great pain to type in keys and mess around with wireless settings most of my day.
View 1 Replies View RelatedI had to uninstall my wireless driver and had to reinstall it. Was having problems. Now is working fine. Now I am trying to use the Campus internet, but I forgot the settings I need to use. When I access the Campus internet, sometimes there is a small window that pop-up and ask for the username, password and domain. But, since the drivers are "fresh" those settings are gone. I am trying to find a way to re-establish those settings. Unfortunate, the campus staff for this are on vacation. class are over. I am trying to figure out what are the settings. the problem is that I can access the wireless, but until I can write the validation form I can access the internet. I know it was on the wireless properties in certification; any help would be nice.
View 2 Replies View RelatedIs it safe to disable IEEE 802.1x, in the wireless network settings?
View 1 Replies View RelatedMy active browser is FIREFOX. Though I have installed IE in my XP. The problem is when importing bookmarks from Firefox to IE, I follow the wizard installed for this purpose at XP, and though the result is shown succesfull at the end this flag pops up: "ERROR CONVERTING BOOKMARKS" . I have tried both ways: Exporting from Firefox and importing from IE and the result is always the same. "ERROR CONVERTING.
View 4 Replies View RelatedI have been using Outlook for quite a while now and have always exported to a CVS or Excel file when backing up. It's not bad, but viewing e-mail on a spreadsheet and losing all the attached files is not the best solution.Are there any good solutions out there? I have a "Save Mail" folder I'd like to back up every so often and be able to search and read through it. Even if it exports all the e-mails into one long document, or PDF, that would be great. Ideally I would like to save the attachments too but that is less critical.I believe Outlook stores in mbox format? So maybe a tool that works with that. Or with Outlook's archive format. Anyway...just looking for a good way to export all my emails to a normal readable file.
View 11 Replies View Relatedis there any utility or procedure for win xp to export the drivers its using.i have already tried copying the system32 folder but tat didnt work
View 1 Replies View Relatedi'm looking for batch program in windows for exporting user and groups and it should be single batch program
Unable to access the import and export options in the file menu of the address book and not sure if this makes any difference.
View 11 Replies View RelatedWhen viewing files as thumbnails in Explorer I can manually rearrange them by simply dragging and dropping. Now they are not in any particular logical order (that is, not by Name or Date Created, etc.), *but* they are in the order I want them. And even when I close and reopen Explorer, as long as I stay in Thumbnails "mode" the files remain in the order I manually placed them.
Now here's the challenge: I have been unable to find a way to export a list of these files *in the order I put them*. There are lots of utilities (even the good old DOS DIR command) that make it possible to list files in various sort orders, but none that I have found that will list the files in the order I put their thumbnails.
My problem is : When I called Verizon yesterday, I was told that to connect the printer to the router, I do not need the print server. I was asked to locate the ethernet port at the back of my printer, plug the ethernet port cable and connect it to the Verizon router. Unfortunately, my printer does not have an ethernet port. I was told to call HP,and I did but did not get much help.What should I do to get my wireless printer work? I have a PC and a laptop. Prior to Verizon, I have a DSL and Vonage, both routers and print server did not have the same problem.
View 1 Replies View RelatedI took my daughters Gateway M320 laptop and did a restore from the CDs that came with the laptop. After doing all the Microsoft Updates, ALL the wireless driver installs from Gateway there is no 'Wireless Network Connection' icon. I have also checked Device Manager and there is no wireless adapter. Before this exercise she was running wireless fine. It does work 'hard wired' but no wireless icon.
View 16 Replies View RelatedThe wireless internet isn't working... I don't know what wireless card I have.. I should only have to install the driver, but I can't get online to download it.
View 10 Replies View RelatedWe have two laptops and one wireless (HP Photosmart C7280) printer. Our laptops both connect to the internet wirelessly through a router. I was able to install and can print wirelessly from my laptop (a Mac) with no problems. However, we cannot figure out how to print wirelessly from my boyfriend's laptop (a Dell). We have installed the printer software and the printer itself on his laptop, and the laptop is able to identify the wireless printer over the network. We made sure that the printer is set to "online" and that file/printer sharing is turned on. But, whenever we go to print any kind of a file, we get an error message simply stating that the printer was unable to print and that we should run the troubleshooter. So, we run the troubleshooter, and we get this message:"The troubleshooter was not able to ping (detect a connection with) your print server. This might be the cause of the problem. Verify that your network is configured correctly and that you are connected to the network."
I am more used to working with Macs and my boyfriend is computer illiterate, so we're a bit lost as to what this means. I was able to set up a wireless network connection on his laptop, but beyond that I'm not sure what else to do. Most of the other advice I've seen online involves a wireless printer that is wired to one computer, and another laptop trying to wirelessly access that printer through the connected computer...if that makes any sense. Our printer isn't wired to anything, and we just can't figure out why it'll print wirelessly on the Mac but not on the Dell laptop. Any ideas?
I have aproblem with my XP machine.when i boot up the small wireless icon says its not connected,Also when i click to view available wireless networks that there are none in range, i reboot the pc and it might resolve it .More often than not it doesnt.Also i sometimes get a yellow exclamation mark over the wlan in device manager.I update the driver and it resolves until next time i boot back up the pc.Wireless switch is on. My 2 other pcs wrk perfect.
View 1 Replies View RelatedDoes anyone happen to know how to successfully create a network in Windows XP Pro for a wireless laptop and for an Ethernet-hooked-up (non-wireless) computer. I'm trying to printer and file share the two together BUT I've exhausted myself in trying to make it happen. Has anyone successfully done this? Am I missing something? Perhaps hardware?I would truly appreciate any help or advice.
View 14 Replies View RelatedIf i log onto my computer and just go into network connections, the computer is not able to look for wireless networks. if i hit the button to find networks, it gives me some strange error message. i have noticed though that i can fix the problem if i manually go into services and start the wireless zero configuration service myself. i configured this service to start automatically, and to keep restarting if attempts to start fail, but for whatever reason, the service does not start on its own when i boot the computer. once i start the service, i am able to connect without any problems.
The error message i get says something about finding more than one wirless device. i have a belkin usb wireless card, and before i installed the one i have now, i had another that coincidentally was the same size and also made by belkin. thinking that maybe some software was still on the computer, causing it to find both, and consequently not being able to connect to either, i uninstalled all the software for both routers and deleted all the related program files off of the computer. then i reinstalled and...got the same exact problem.
Everytime I try to export HKLM and HKU as Registry Hive Files using regedit, I get the following error message: Registry Editor Cannot export D:HivesLocal Machine: Error writing the file. There may be a disk or file system error. I am trying to export the above mentioned hive to my second hdd. Can anyone tell me what I am doing wrong
View 3 Replies View RelatedI found images in Windows Picture and Fax viewer that I want to delete. I can delete them one-by-one, but that takes time. I went to Disk Cleanup up and deleted all Temp and Temp internet files, but the images are still there. I checked Properties of the images for the file names, went to Win Explorer, but only found C:Documents and Settingsuser, there was no subfolder for Local Settings and, obviously nothing after that. I did a Search in Explorer, including hidden files and folders, for the file names and the searches resulted in nothing. I am back to deleting one-by-one, but my concern is, Where did everything from Local Settings on go to. BTW, I also run Skybot, Adaware and Norton virus weekly
View 14 Replies View RelatedWhen I started up it says Win.ini corrupt. Then it starts up as a new user losing track of Favorites and Start Menu and Desktop Icons, Display and Folder attributes. Under
Documents and Settings it has added Dave.U5R2D5 in addition to Dave which still has all the information. I tried switching the 2 Filenames to get back to what it used to be but gave an error message and didn't do it and started another new file.Is there some way to use the old Dave file?
I'm having a major problem with XP Home Edition. When I start my computer, I get the Loading Settings screen, which automatically switches to the Saving Settings screen and then goes back to Loading Settings, Saving Settings, etc, etc, (the "Windows XP Startup" and "Windows XP Shutdown" sounds repeat themselves one right after the other). By the way, I have the XP tweak that skips the Welcome and log on screens at startup since I'm the only person that uses the computer. I've tried Debugging, Safe Mode with Command Prompt, Restore To Last Working Settings and a few others, but nothing is working. I ran Spybot just before shutting down the computer the last time it worked and got the "Congratulations! Your system contains no spyware" message. When I restarted the computer, I started having this problem. I also have Norton Anti Virus 2004 and did a Live Update (manually) a few hours before this started happening.
View 14 Replies View RelatedWhat is the "Temp" folder for which is at C:Documents and Settings Admin Local Settings Temp? Nothing seems to appear there while I use IE to browse.
View 3 Replies View RelatedFiles and settings wizard does not replace files and settings after re installation. of XP. After several tries I got a copy of FASTconv, a command line program, to extract the files. It has been a long time since I used a command line and the command is complex. I have set the command follows........ fastconv /V /S:source store /D:destination store /T:temp store /I left out the /I switch so all files in the Dir source store would be extracted. Same thing happens when I put in /I switch.I named the Dir. source store, destination store and temp store. When I run it I get instructions on usage and a command prompt What am I missing?
View 2 Replies View RelatedHow to connect from Wireless router to Wireless router.
View 1 Replies View RelatedI just finally got my wireless connection working, after a couple days. Is there any particular tweak or setting for windows firewall Anything I need to do there to make sure I am protected
View 5 Replies View RelatedThinkpad T30 running XP pro. In order to use my wireless network I must run the services.msc program to start the wireless. I can connect to my neighbors unsecured wireless automatically but not my own secured network. Microsoft Bulletin # 871122 explains how to run the program but it is required to run every time I reboot. How do I permanently make the change?
View 7 Replies View RelatedI am living in a shared residence and the guys here are running wireless adsl. It is an infrastructure network using 128bit WEP encryption. I'm not sure about their hardware but I am using an asus 54mbps usb stick. I have no problmes logging on but for some reason the wireless config. program automatically checks the "the key is provided for me automatically" option in the network properties. Now this prevents me from getting access to the network after any sort of disconnection. If I uncheck this box the stars in the key field (representing the WEP key) dissappear and so the key needs to be reentered. It only does this some times and since I don't have a copy of the key (the network administrator enters it on my computer) every couple of days I need to get the key re-entered on my computer. It is a real hassle and I can't work out why windows keeps defaulting to this option of having the key provided automatically.
View 1 Replies View RelatedI can't seem to be able to connect to my wireless Internet on one of the computers I have. (It's NOT a laptop) I plugged the router into the computer and it can't find my network, or any, really. It works on a different computer. I'm guessing the wireless config is turned off or something. I have played around with the computer and can't seem to turn it on. Where would it be located? I'll post updates as I get them.
View 2 Replies View RelatedI have installed a intel wireless card and cannot get it to link with my linksys broadband router ,it seems that the set up has allocated a wrong ip addres .I can log on through my router via my lan conn on th pc.What have I done incorrectly and how can I resolve.
View 1 Replies View RelatedI've got 2 Identical computers...WinXP Pro SP2...and I'm trying to set up a wireless connection. Just got the router (Belkin F5D7230-4)set up downstairs and after alot of BS it's working fine, I've got the matching wireless PCI card upstairs and can't get any available network! As a matter of fact....I had a hell of a time installing the card...my MOBO just didn't want to recognize it! I'll break off here so anyone that's had a similar problem can reply.
View 3 Replies View RelatedI have an older computer installed Windows XP Pro If looks fine.I was previously able to detect wireless signals and connect to the internet. I didnt add a wriless card it was already onboard the computer.I dont know what happened after the install:Do I have to download the wirless drivers for my wireless? Is there something I have to do so XP knows I have a wireless card?Is there a software out there that will detect what wireless hardware I have and show me what driver to install?
View 3 Replies View Related