Errors - Off And Back On And No Boot
Aug 15, 2007
The latest error I'm getting is this. Sorry it's so big but it's a photo of the screen.This is happening virtually every time I try and load in any programs to Windows. If I use Windows restore to roll back to before the program installation then it becomes stable again (usually).Windows update, spyware scans and antivirus etc. Left the machine doing a virus scan over night and next morning it was locked up. Turned it off and back on, and no boot. No hard drives found. So located and reinstalled SATA drivers, and then managed to see the hard drives, but just after POST the machine fell down and restarted. With the help of some other tech guys I managed to use ERD to get onto the install, and tried to use Windows restore, but it told me I needed Service Pack 2 and wouldn't.
View 5 Replies
ADVERTISEMENT
Feb 18, 2008
I keep getting this stop error on windows boot that says IRQL_NOT_LESS_OR_EQUAL. From what I can find on the net its a driver that is causing this. I'd like to find what driver so I can fix it. Every now and then the machine boots so I can actually use the computer. I just need a way of identifying which driver it is.
View 1 Replies
View Related
Oct 17, 2008
I have several programs on my computer that I don't even know what they do. I'm going through them and deleting what I don't need.
View 2 Replies
View Related
Mar 3, 2007
All of a sudden, my computer is taking about 5 minutes to fully boot up. Before, it took less than a minute to do so. I checked out the Event Viewer and I saw a bunch of disk errors which said, "The deviceDeviceHarddisk 1D has a bad block". D was a partition on my secondary drive. So I performed a chkdsk on it. It found no problems. I used Fix-it Utilities 7 to test it. No problems found. Still taking 5 minutes to boot up and getting the same disk D error events. I swept my system for spyware and malware with Spy Sweeper, Spyware Doctor and Ad-Aware. No problems found. Still taking 5 minutes to boot up and getting the same disk D error events
View 3 Replies
View Related
Feb 24, 2007
I'm working on a Compaq Deskpro EN500 running Windows XP Professional SP2 (with all patches and updates), current antivirus and antispyware, and firewall. The system was working fine, user was online browsing the web when the system froze. The mouse froze, etc. Start button could not be accessed. The user shut down the system with the power button. When he turned it back on, he was greeted with the standard Microsoft 'an error has occured' screen' and given the choices of Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good
Start Windows Normally
When I choose any of these, I can get as far as the Windows XP splash screen and then the system seizes. I can get into the Windows Recovery Console. I have run a CHKDSK /P /R and a FIXBOOT. CHKDSK returns no errors. I'm not sure what to try next short of a rebuild.
View 14 Replies
View Related
Aug 26, 2009
When I boot up my computer, I get several messages from Windows which read this way: "[insert file with a .exe extension here] - Corrupt File The file or directory C:WINDOWSsystem32UACmqiemusiwu.dll is corrupt and unreadable. Please run the Chkdsk utility." This message comes up every time that I try to run an executable file and seems to prevent some of them from running altogether. I can run Chkdsk in Safe Mode, but after it completes file verification it says "Errors found. CHKDSK cannot continue in read only mode." I have a virus (Total Security 2009) that is preventing the computer from displaying the command prompt in regular mode, but the programs that I need to get ride of the virus are all executable and cant be installed because of this glitch. Any help with what this file UACmqiemusiwu.dll is or how to fix it would be great. I've tried deleting it, but the computer won't let me because it is corrupt and unreadable.
View 9 Replies
View Related
Dec 26, 2005
Whenever I restart my system, not every program in the Start Group loads. I have to log off and then log back on, and then most of the applications load. McAfee VirusScan, however, list as "disabled", and I have to reun servicesmsc to disable and then enable. WordPerfect DAD can only load manually even though it's in the start group. I don't think a System Restore will work because this has been going on for many months, and virtually immediately afer the system was built.
View 6 Replies
View Related
Dec 4, 2004
When I start the computer, I get a screen freeze and have to press Ctrl,Alt,Del once before any programs will startup. A lot of probs with internet connection and slowness while surfing as well as a lot of pop up ads in my face.
There are system boxes coming up with registry and dll errors and the whole system seems SLOW.
View 3 Replies
View Related
Aug 16, 2006
I installed Windows XP Home Edition with SP1 on a brand new home built computer and downloaded the beginning programs, firefox, spyware blaster, I visited microsoft.com to install all the updates; SP2 I believe among other things, and when I shut the computer down to finalize the installation of the updates it did not boot back up. It just stays on the Windows XP screen with the moving blue bars then goes black and goes to the first boot screen again. I system restored to before the updates and tried to install them before I installed all my other programs and when I restarted it after the installation it failed to boot up again?
View 3 Replies
View Related
May 22, 2007
My OS is Win2K Pro and when attempting to boot yesterday my computer hung on the Go Back app and would go no further. During several subsequent attempts I got far enough in the boot process to get an error saying my keyboard wouldn't work. Using a third keyboard I somehow got a full boot with my Windows CD and quickly ran a virus scan showing no infection and thought everything was okay, took out the CD and changed the boot sequence back.Now I'm stuck on the Go Back screen again. While in BIOS I discovered it said the year was 2002 and thought that was why Go Back hung but reset the clock and still nothing works. I can't boot to safe mode (only beeps when I tap the keyboard), now the windows CD will not boot the machine. I've tried to do a reinstall, but am told two small partitions are too small (no option for changing their size) and for some reason can't install on the primary partition, just a note saying I can't, nothing else. I can only get to Set-Up and BIOS. I've tried burning different boot disks to CD (no floppy drive)on another computer but only get Retry Boot when using them.Various times I can get far enough to get Go Back to load then try to revert, but just get a Wait notice from the app and nothing further.No sounds when booting unless I tap F5 or F8, sometimes F12 beeps every time I tap. Of course I haven't backed up my documents and WAB, etc. so I'm trying not to delete partitions and start over.
View 9 Replies
View Related
Mar 6, 2007
My Dell Dimension 8400 suddenly won't boot up, and Dell told me I would have to reinstall the OS (XP Media Center Edition). I would rather try to repair the boot files first in order to save all of my apps, drivers and files. But before trying this, I would like to move my SATA HDD to another PC and make it a slave so that I can backup my files to an external HD. Is this a complex task? Dell also told me that all of my OE apps are stored on a partition in my HDD, so a reinstall will put me back to the way my PC was when I first got it, but I would then have to try to find all the drivers for everything I have since installed.
View 12 Replies
View Related
Sep 11, 2005
I used the backup utility that comes with XPPro/(i am running sp2) and used the wizard process.I chose the one that says you will be prompted to make a floppy once the back-up is done.The back up is done(i copied the whole of "C" drive onto another drive on my machine) but there was no prompt to make a floppy.I guess i have two questions..
1. what happened to the prompt, how do i get the wizarfd to work etc etc
2. to make my own floppy, what files should i put on it?
View 2 Replies
View Related
Oct 22, 2007
The family computer is playing up and to the best of my knowledge the computer in question just simply suddenly stopped working as it should. I am unable to get the 'default' welcome screen upon start up and am getting the logon box where you type in a username and passworld. I know how to get rid of this, user accounts>enable welcome screen - but it will not solve the problem.This is just the start of the problems. I get a whole host of errors which popup one after another.
View 4 Replies
View Related
Jul 9, 2009
i wanted to dual boot windows 7 with XP. I partitioned my HDD with the built in utility and waited for it to format. I then restarted my computer with the XP disc in the DVD-Drive and waited for it to install on my newly made partition. After it restarted for the first time i got a "Disk read error - Press CTRL + ALT + DEL to restart" and this continues to happen so i cannot get into windows.
View 3 Replies
View Related
Feb 11, 2008
I have a Dell laptop Inspiron 8500 that I used extensively for work. 2ghz cpu P4m, 2gig ram, 160gig hitachi HD.A couple of times in the past few months it has occasionally came up with only a flashing cursor in the top left. Now it does it once a week at least( update: even more frequent ). I've cannot boot into safe mode. The bios settings seem ok. I can only boot when it's like this from a bootable ISO CD.( ie Acronis rescue disk or XP setup ). To workaround so far, when this happens: I remove the laptop drive then use another computer to read the drive using a usb to mini IDE adapter to read off my recent work, I then re-insert and run the Hitachi factory tests for this drive via bootable ISO: It always passes fine. The drive reads fine too via the usb or in the laptop using a boot disk.Then I use "Acronis True Image home" to restore the drive back to the last backup( which I do 2 times weekly now because of this ) It takes 3hours to restore the image, and then I copy back my recent work , and all works fine for about a week( or now hours ).
I bought "ASO advanced Sytem Optimizer" and cleaned up the registry, and defragged the drive using "AShampoo Magic Defreg". I was excited because I thought it was a registry problem or fragmentation issue.It worked fine all week and seems faster even. I was happy.Today it did the same no-boot thing when I when to to boot up. Blank screen with flashing cursor in the top left.It really seems like something is killing or malwaring either the registry, mbr, or bootloader on powerdown. ( I have bitdefender 10 running when it's running.)I'm running the Dell diags disk and it all passes. I can boot and restore the partition using Acronis . I'm at a loss... Thanks for any help. I enabled shutdown event logging and no errors show in the system logs, but the applicationo event log shows userinit.exe could not run a script event ID 1000 at the timestamp that I did the shutdown.
View 7 Replies
View Related
Apr 5, 2008
i have a windows xp system. it is a desktop (gateway). yesterday my computer crashed, and it wont load windows at all. it comes to the black screen with the options off booting windows normally, last known config, safe mode and the others. i cant boot windows in any of these config's.i have everything for school, my bills, my music and pictures. i need to back up all of my data but i cant get into windows at all
View 2 Replies
View Related
Apr 5, 2008
i have a windows xp system. it is a desktop (gateway). yesterday my computer crashed, and it wont load windows at all. it comes to the black screen with the options off booting windows normally, last known config, safe mode and the others. i cant boot windows in any of these config's.i have everything for school, my bills, my music and pictures. i need to back up all of my data but i cant get into windows at all
View 2 Replies
View Related
Jan 14, 2006
I had a missing "Windowssystem32configsystem" upon restarting my comp last Saturday. Couldn't boot into safe mode at all. Used HP's recovery console to run chkdsk and it fix errors on the volume. Wouldn't let me run the recovery disks I had to get from HP since they are not given with a new computer. Great I thought.Upon starting now, my antivirus won't run and a lot of Windows programs(Search adn System Restore just a blank page, Media Player, etc) .I can get IE to open up but no active X although it says it is enabled, also my home page doesn't show up at all but it is set to it. Those are some of the things I have found wrong so far as I am sure I have more.
View 14 Replies
View Related
Jun 30, 2005
I am being shown "script error","page error, you may need to change browser
settings",and "behind firewall" when I try and send files and photos. I've
tried everything I know to fix this, but I still see these errors and still
cannot send photos while I'm online.
View 1 Replies
View Related
Mar 24, 2008
I did an AVG Rootkit scan which turned up "c:windows/system32/userinit.exe" as a dodgy file. I removed it and now the machine won't login when I boot the system. With a bit more digging it seems that this file was actually the login information within the registry and as it can't find a valid user/password it just keeps asking me click the user name and login. When I click it just loops back and throws back up the window, asking me to click the user name again.How I can access the registry and reset the userinit.exe file?I've tried selecting "last good configuration" which didn't work.I also tried to download Bart PE on another machine (running Vista) to set up a boot CD, but it wasn't particularly clear how to go about it, so I tried using the XP System Recovery app on the install disks. This got me into a C: prompt.
View 27 Replies
View Related
Jan 22, 2006
I bought my Dell 4700 about 6 months ago and was just going through the discs that came with it. I remembered that the Dell did not come with a Windows XP install disc in case I need to re-format. Is this normal? There is an option under Start....Accessories....System Tools to create OS backup disc. Is that what I need to make a disc or should it have came with one?
View 6 Replies
View Related
Oct 27, 2009
Are you guys having the same problem? Using IE7, when viewing a thread, if I hit the back arrow to go back to the page I was previously viewing, it doesn't move at all. It started acting weird a couple of days ago when it took sometimes two hits on the back arrow to go back. Now it doesn't go back to the previous page at all.
View 7 Replies
View Related
Sep 1, 2005
I am trying to back up my docs and system when I do on either the wizard or the advanced mode-it still tells me "the back up file name could not be used: "Eackup.bkf" " please ensure that it is a valid path and the you have sufficent access."
View 3 Replies
View Related
Sep 21, 2005
I was wondering if someone knew how I can get my back button back. when I get into a site. it wont let me hit the back button at the top of the screen.
View 1 Replies
View Related
Nov 11, 2006
I am unable to boot my PC most of the times.Whenever I switch on my PC,I see the following message nine ot of ten times. DiskError/Boot Faliure Reboot and select proper boot device or insert Boot media in selected boot device If I press enter after this messages & keep pressing following messages appear from time to time (Not simultaneously). If just after making the switch on, I press F2 key to check the boot device preference
If just after making the switch on , I press f11 key to reach the boot menu I always find the 1.44 MB Floppy option highlighted as the booting choice.(though there had not been any floppy in the floppy drive, I dont have any really)I make the hard disk option highlighted & it solves the problem only a few times. But next time when I try F11 key to check the boot menu again I find 1.44 MB floppy highlighted.
View 1 Replies
View Related
Dec 30, 2009
When trying to load MSN, I keep getting a missing .dll file. I'm also getting it when I try to run the Flipvideo software.
View 1 Replies
View Related
Apr 13, 2010
.dll errors. Not a single one in particular. Random ones. Two today were mshtml.dll and ietutil.dll. Microsoft has some, but not for an XP computer. I do not know anymore if it is a service pack 2 or 3 since my brother in law took our Compaq computer and made one on his own with old and new parts. What are .dll and why do these errors keep popping up.
View 3 Replies
View Related
Jan 21, 2005
I can't seem to figure out why I have all these popups. Every time I try to close one, 2 more open in its place.
View 14 Replies
View Related
Oct 26, 2008
When SP3 first came out, I jumped at the opportunity to update my perfectly running smooth computer with SP3 for windows. As soon as I did install SP3, nothing seemed to work correctly anymore and I had to end up reformatting my computer. It destroyed my perfectly good up to date computer. Yes I have a genuine copy of Windows XP if that's what you were about to say. So my question is, did anyone else every have a problem with SP3, are their known issues, and should I risk installing it again? I have always believed in if its not broke, then dont fix it. Well, sometimes my high hopes and curiosity of updating will improve performance from what it already is, gets me in trouble sometimes. Let me know guys. I will hold off for a bit.
View 8 Replies
View Related
Mar 15, 2005
I am running Win 2000. My computer will restart (no hanging even, just turn off and back on) while I'm looking at flash media on the net, using photo/art programs, or viewing a word document with pictures in it. Mostly media related things. It also crashes for running defrag or disk cleanup.
When it restarts it's a blue screen stop error. I don't recall what it said exactly, but it's not difficult to get it back. If I keep restarting, I'll keep getting that error. If I wait a minute or so and then restart, it'll come on correctly.
Win 2000 is on D and Win 98 is on C. When 2000 crashes it does something to C because then 98 won't start untill 2000 comes on and repairs the C drive. But now 98 won't come on at all. If I turn on 98 I get an error, so then I'll try 2000 but it won't start for a while after 98 crashes. I don't see why crashes on D affect C and vice versa.
That probably wasn't enough to tell what's wrong.what I should do?
View 5 Replies
View Related
Jun 13, 2005
The procedure entry point DdEntry1 could not be located in the dynamic link library GDI32.dll
That's the error message I'm getting. I get it from the ATI and XFire. Also, I can't play certain games anymore, because they are prompting me to download dx9.0c
View 7 Replies
View Related
